980 lines
25 KiB
Makefile
980 lines
25 KiB
Makefile
# !!!! BETA Makefile !!!!
|
|
# !!!! Use at own risk !!!!
|
|
#----------------------------------------------------------------------------
|
|
# On command line:
|
|
#
|
|
# make all = Make software.
|
|
#
|
|
# make clean = Clean out built project files.
|
|
#
|
|
# make coff = Convert ELF to AVR COFF.
|
|
#
|
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
#
|
|
# make program = Download the hex file to the device, using avrdude.
|
|
# Please customize the avrdude settings below first!
|
|
#
|
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
# with avr-gdb or avr-insight as the front end for debugging.
|
|
#
|
|
# make filename.s = Just compile filename.c into the assembler code only.
|
|
#
|
|
# make filename.i = Create a preprocessed source file for use in submitting
|
|
# bug reports to the GCC project.
|
|
#
|
|
# To rebuild project do "make clean" then "make all".
|
|
#----------------------------------------------------------------------------
|
|
|
|
#----------- BUILD OPTIONS ---------------------------
|
|
|
|
#gruvin: PCB version -- OVERRIDES the following settings if not STD
|
|
# Values: STD, V3, V4
|
|
PCB = STD
|
|
#NOTE!: V4 adds to V3, such that both PCBV3 and PCBV4 get defined
|
|
|
|
# Following options for PCB=STD only (ignored otherwise) ...
|
|
|
|
# Enable JETI-Telemetry or FrSky Telemetry reception on UART0
|
|
# For this option you need to modify your hardware!
|
|
# More information at [insertURLhere]
|
|
# Values = STD, JETI, FRSKY
|
|
EXT = STD
|
|
|
|
# Enable heli menu
|
|
# Values = YES, NO
|
|
HELI = NO
|
|
|
|
# Enable templates menu
|
|
# Values = YES, NO
|
|
TEMPLATES = YES
|
|
|
|
# Enable navigation with Pots / Rotary encoders
|
|
# Values = NO
|
|
# POT1 (only POT1 available for fields modification),
|
|
# POT2 (menus scroll),
|
|
# POT3 (cursor down/up),
|
|
# POTS (POT1, POT2, POT3),
|
|
# RE1 (Rotary encoder 1, on V3/V4 boards)
|
|
ifeq ($(PCB), V4)
|
|
NAVIGATION = RE1
|
|
else
|
|
NAVIGATION = POTS
|
|
endif
|
|
|
|
# gruvin: BEEPER. Values = BUZZER, BUZZER_MOD or SPEAKER
|
|
# (without a mod, BUZZER can make PPM jack output switch from output to input at random)
|
|
# SPEAKER mode actually works on the stock radio, using the stock beeper. Sort of sound OK(ish).
|
|
BEEPER = BUZZER
|
|
|
|
# gruvin: Legacy support freeing of USART1 TX/RX pins [DEPRECATED]
|
|
# OPTIONS STD or FREED
|
|
USART1 = STD
|
|
|
|
# gruvin: PCM-in circuit mod for JR/Spektrum (and others) compatability
|
|
# Values = STD, MOD1
|
|
PPMIN = STD
|
|
|
|
# SPLASH on START
|
|
SPLASH = YES
|
|
|
|
# BATT voltage algorithm. Values = BANDGAP, UNSTABLE_BANDGAP
|
|
BATT = BANDGAP
|
|
|
|
# Decimals display in the main view (PPM calibration,
|
|
# Values = YES, NO
|
|
DECIMALS = YES
|
|
|
|
# DISPLAY_USER_DATA to display on screen data from FrSky module (testing/demo purpose)
|
|
# Values = YES, NO
|
|
DISPLAY_USER_DATA = NO
|
|
|
|
# FrSky Hub
|
|
# Values = YES, NO
|
|
FRSKY_HUB = YES
|
|
|
|
# WS HowHigh
|
|
# Values = YES, NO
|
|
WS_HOW_HIGH = YES
|
|
|
|
# SDCARD Logs
|
|
# Values = YES, NO
|
|
LOGS = YES
|
|
|
|
# PXX (FrSky PCM) protocol
|
|
PXX = NO
|
|
|
|
# DSM2 (Spektrum) protocol
|
|
DSM2 = NO
|
|
|
|
# Silver protocol
|
|
SILVER = NO
|
|
|
|
# CTP-1009 protocol
|
|
CTP1009 = NO
|
|
|
|
# SOMO-14D module
|
|
SOMO = NO
|
|
|
|
# TRANSLATIONS
|
|
# Values = en,
|
|
TRANSLATIONS = EN
|
|
|
|
#------- END BUILD OPTIONS ---------------------------
|
|
|
|
# MCU name
|
|
ifeq ($(PCB), STD)
|
|
MCU = atmega64
|
|
endif
|
|
ifeq ($(PCB), V3)
|
|
MCU = atmega2561
|
|
endif
|
|
ifeq ($(PCB), V4)
|
|
MCU = atmega2560
|
|
endif
|
|
|
|
# Processor frequency.
|
|
F_CPU = 16000000
|
|
|
|
# Output format. (can be srec, ihex, binary)
|
|
FORMAT = ihex
|
|
|
|
# Target file name (without extension).
|
|
TARGET = gruvin9x
|
|
|
|
# Object files directory
|
|
OBJDIR = obj
|
|
|
|
# List C++ source files here. (C dependencies are automatically generated.)
|
|
CPPSRC = gruvin9x.cpp pulses.cpp stamp.cpp menus.cpp model_menus.cpp general_menus.cpp main_views.cpp statistics_views.cpp pers.cpp file.cpp lcd.cpp drivers.cpp o9xstrings.cpp
|
|
|
|
ifeq ($(EXT), JETI)
|
|
CPPSRC += jeti.cpp
|
|
endif
|
|
|
|
# Disk IO support (PCB V2+ only)
|
|
ifneq ($(PCB), STD)
|
|
CPPSRC += gtime.cpp
|
|
CPPSRC += rtc.cpp
|
|
CPPSRC += ff.cpp
|
|
CPPSRC += diskio.cpp
|
|
endif
|
|
|
|
# List Assembler source files here.
|
|
# Make them always end in a capital .S. Files ending in a lowercase .s
|
|
# will not be considered source files but generated files (assembler
|
|
# output from the compiler), and will be deleted upon "make clean"!
|
|
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
|
# it will preserve the spelling of the filenames, and gcc itself does
|
|
# care about how the name is spelled on its command-line.
|
|
ASRC =
|
|
|
|
|
|
# Optimization level, can be [0, 1, 2, 3, s].
|
|
# 0 = turn off optimization. s = optimize for size.
|
|
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
|
OPT = s
|
|
|
|
|
|
# Debugging format.
|
|
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
|
# AVR Studio 4.10 requires dwarf-2.
|
|
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
|
DEBUG = dwarf-2
|
|
|
|
|
|
# List any extra directories to look for include files here.
|
|
# Each directory must be seperated by a space.
|
|
# Use forward slashes for directory separators.
|
|
# For a directory that has spaces, enclose it in quotes.
|
|
EXTRAINCDIRS = translations
|
|
|
|
|
|
# Compiler flag to set the C Standard level.
|
|
# c89 = "ANSI" C
|
|
# gnu89 = c89 plus GCC extensions
|
|
# c99 = ISO C99 standard (not yet fully implemented)
|
|
# gnu99 = c99 plus GCC extensions
|
|
CSTANDARD = -std=gnu99
|
|
|
|
|
|
# Place -D or -U options here for C sources
|
|
CDEFS = -DF_CPU=$(F_CPU)UL
|
|
|
|
|
|
# Place -D or -U options here for C++ sources
|
|
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
|
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
|
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
|
|
|
# NOTE: PCB version now overrides all the earlier individual settings
|
|
# These individual settings work only for PCB=STD
|
|
|
|
CPPDEFS += -DTRANSLATIONS_$(TRANSLATIONS)
|
|
|
|
# If POT1/POTS/RE1 is used for fields modification
|
|
ifeq ($(NAVIGATION), POT1)
|
|
CPPDEFS += -DNAVIGATION_POT1
|
|
endif
|
|
ifeq ($(NAVIGATION), POT2)
|
|
CPPDEFS += -DNAVIGATION_POT2
|
|
endif
|
|
ifeq ($(NAVIGATION), POT3)
|
|
CPPDEFS += -DNAVIGATION_POT3
|
|
endif
|
|
ifeq ($(NAVIGATION), POTS)
|
|
CPPDEFS += -DNAVIGATION_POT1 -DNAVIGATION_POT2 -DNAVIGATION_POT3
|
|
endif
|
|
|
|
ifneq ($(SPLASH), NO)
|
|
CPPDEFS += -DSPLASH
|
|
endif
|
|
|
|
MODS =
|
|
|
|
ifeq ($(PCB), STD)
|
|
# STD PCB, so ...
|
|
|
|
CPPDEFS += -DPCBSTD
|
|
|
|
# If Hardware PPM mode ( PB0<->BP7) switch the Backlight output with the original PPM to use hardware facility to generate precise PPM (hardware mods)
|
|
# G: TODO This prevents HARDPPM being used with FRSKY. HARDPPM needs its own option XXX
|
|
ifeq ($(EXT), HARDPPM)
|
|
CPPDEFS += -DPPMPB7_HARDWARE
|
|
endif
|
|
|
|
# If JETI-Support is enabled
|
|
ifeq ($(EXT), JETI)
|
|
MODS += J
|
|
CPPDEFS += -DJETI
|
|
endif
|
|
|
|
# If FRSKY-Support is enabled
|
|
ifeq ($(EXT), FRSKY)
|
|
MODS += F
|
|
CPPDEFS += -DFRSKY
|
|
CPPSRC += frsky.cpp
|
|
# If FRSKY-Hub is enabled
|
|
ifeq ($(FRSKY_HUB), YES)
|
|
CPPDEFS += -DFRSKY_HUB
|
|
endif
|
|
# If WS HowHigh is enabled
|
|
ifeq ($(WS_HOW_HIGH), YES)
|
|
CPPDEFS += -DWS_HOW_HIGH
|
|
endif
|
|
endif
|
|
|
|
# gruvin: If buzzer speaker replacment supported
|
|
ifeq ($(BEEPER), SPEAKER)
|
|
CPPDEFS += -DBEEPSPKR
|
|
endif
|
|
|
|
# If buzzer modified (no interference with PPM jack)
|
|
ifeq ($(BEEPER), BUZZER_MOD)
|
|
CPPDEFS += -DBUZZER_MOD
|
|
endif
|
|
|
|
# If BandGap is not rock solid
|
|
ifeq ($(BATT), UNSTABLE_BANDGAP)
|
|
CPPDEFS += -DBATT_UNSTABLE_BANDGAP
|
|
endif
|
|
|
|
# gruvin: Legacy support for hardware mod freeing USART1 [DEPRECATED]
|
|
ifeq ($(USART1), FREED)
|
|
CPPDEFS += -DUSART1FREED
|
|
endif
|
|
|
|
# gruvin: PCM-in circuit mod for JR/Spektrum (and others) compatability
|
|
ifeq ($(PPMIN), MOD1)
|
|
CPPDEFS += -DPPMIN_MOD1
|
|
endif
|
|
|
|
else
|
|
# not PCB=STD, so ...
|
|
|
|
ifeq ($(NAVIGATION), RE1)
|
|
CPPDEFS += -DNAVIGATION_RE1
|
|
endif
|
|
|
|
CPPSRC += frsky.cpp
|
|
CPPDEFS += -DPCBV3 -DFRSKY -DFRSKY_HUB -DWS_HOW_HIGH
|
|
ifeq ($(PCB), V3)
|
|
CPPDEFS += -DBEEPSPKR
|
|
endif
|
|
ifeq ($(LOGS), YES)
|
|
CPPSRC += logs.cpp
|
|
CPPDEFS += -DLOGS
|
|
MODS += L
|
|
endif
|
|
ifeq ($(PCB), V4)
|
|
CPPDEFS += -DPCBV4
|
|
# Temporary hack to get stock beeper working for testing, etc ... make BEEPER=BUZZER_MOD
|
|
# TODO should not be needed / tested here in V4
|
|
ifeq ($(BEEPER), BUZZER_MOD)
|
|
CPPDEFS += -DBUZZER_MOD
|
|
else
|
|
CPPDEFS += -DBEEPSPKR
|
|
endif
|
|
endif
|
|
ifeq ($(SOMO), YES)
|
|
CPPSRC += somo14d.cpp
|
|
CPPDEFS += -DSOMO
|
|
endif
|
|
endif
|
|
|
|
|
|
### Global Build-Option Directives ###
|
|
|
|
ifeq ($(DECIMALS), YES)
|
|
CPPDEFS += -DDECIMALS_DISPLAYED
|
|
endif
|
|
|
|
ifeq ($(HELI), YES)
|
|
MODS += H
|
|
CPPDEFS += -DHELI
|
|
endif
|
|
|
|
ifeq ($(TEMPLATES), YES)
|
|
CPPDEFS += -DTEMPLATES
|
|
CPPSRC += templates.cpp
|
|
endif
|
|
|
|
ifeq ($(DISPLAY_USER_DATA), YES)
|
|
CPPDEFS += -DDISPLAY_USER_DATA
|
|
endif
|
|
|
|
ifeq ($(PXX), YES)
|
|
CPPDEFS += -DPXX
|
|
endif
|
|
|
|
ifeq ($(DSM2), YES)
|
|
CPPDEFS += -DDSM2
|
|
endif
|
|
|
|
ifeq ($(SILVER), YES)
|
|
CPPDEFS += -DSILVER
|
|
endif
|
|
|
|
ifeq ($(CTP1009), YES)
|
|
CPPDEFS += -DCTP1009
|
|
endif
|
|
|
|
#---------------- Compiler Options C ----------------
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CFLAGS = -g$(DEBUG)
|
|
CFLAGS += $(CDEFS)
|
|
CFLAGS += -O$(OPT)
|
|
#CFLAGS += -mint8
|
|
#CFLAGS += -mshort-calls
|
|
CFLAGS += -funsigned-char
|
|
CFLAGS += -funsigned-bitfields
|
|
CFLAGS += -fpack-struct
|
|
CFLAGS += -fshort-enums
|
|
#CFLAGS += -fno-unit-at-a-time
|
|
CFLAGS += -Wall
|
|
CFLAGS += -Wstrict-prototypes
|
|
CFLAGS += -Wundef
|
|
#CFLAGS += -Wunreachable-code
|
|
#CFLAGS += -Wsign-compare
|
|
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
|
|
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
CFLAGS += $(CSTANDARD)
|
|
|
|
CFLAGS+= --combine -fwhole-program
|
|
|
|
|
|
#---------------- Compiler Options C++ ----------------
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CPPFLAGS = -g$(DEBUG)
|
|
CPPFLAGS += $(CPPDEFS)
|
|
CPPFLAGS += -O$(OPT)
|
|
#CPPFLAGS += -mint8
|
|
#CPPFLAGS += -mshort-calls
|
|
#CPPFLAGS += -funsigned-char
|
|
#CPPFLAGS += -funsigned-bitfields
|
|
#CPPFLAGS += -fpack-struct
|
|
#CPPFLAGS += -fshort-enums
|
|
#CPPFLAGS += -fno-exceptions
|
|
#CPPFLAGS += -fno-unit-at-a-time
|
|
CPPFLAGS += -Wall
|
|
CPPFLAGS += -Wno-strict-aliasing
|
|
#CPPFLAGS += -Wstrict-prototypes
|
|
#CFLAGS += -Wundef
|
|
#CPPFLAGS += -Wunreachable-code
|
|
#CPPFLAGS += -Wsign-compare
|
|
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
|
|
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
#CPPFLAGS += $(CSTANDARD)
|
|
|
|
AVRGCCFLAGS = -fno-inline-small-functions
|
|
|
|
|
|
#---------------- Assembler Options ----------------
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -ahlms: create listing
|
|
# -gstabs: have the assembler create line number information; note that
|
|
# for use in COFF files, additional information about filenames
|
|
# and function names needs to be present in the assembler source
|
|
# files -- see avr-libc docs [FIXME: not yet described there]
|
|
ASFLAGS = -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs
|
|
|
|
|
|
#---------------- Library Options ----------------
|
|
# Minimalistic printf version
|
|
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
|
|
|
# Floating point printf version (requires MATH_LIB = -lm below)
|
|
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
|
|
|
# If this is left blank, then it will use the Standard printf version.
|
|
PRINTF_LIB =
|
|
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
|
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
|
|
|
|
|
# Minimalistic scanf version
|
|
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
|
|
|
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
|
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
|
|
|
# If this is left blank, then it will use the Standard scanf version.
|
|
SCANF_LIB =
|
|
#SCANF_LIB = $(SCANF_LIB_MIN)
|
|
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
|
|
|
|
|
MATH_LIB = -lm
|
|
|
|
|
|
|
|
#---------------- External Memory Options ----------------
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# used for variables (.data/.bss) and heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# only used for heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
EXTMEMOPTS =
|
|
|
|
|
|
|
|
#---------------- Linker Options ----------------
|
|
# -Wl,...: tell GCC to pass this to linker.
|
|
# -Map: create map file
|
|
# --cref: add cross reference to map file
|
|
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
|
LDFLAGS += $(EXTMEMOPTS)
|
|
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
|
#LDFLAGS += -T linker_script.x
|
|
|
|
|
|
|
|
#---------------- Programming Options (avrdude) ----------------
|
|
|
|
# Programming hardware: alf avr910 avrisp bascom bsd
|
|
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
|
|
#
|
|
# Type: avrdude -c ?
|
|
# to get a full listing.
|
|
#
|
|
AVRDUDE_PROGRAMMER = avrispmkII
|
|
|
|
|
|
# com1 = serial port. Use lpt1 to connect to parallel port.
|
|
AVRDUDE_PORT = usb
|
|
|
|
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex:a
|
|
AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).bin:a
|
|
AVRDUDE_READ_FLASH = -U flash:r:$(TARGET).hex:r
|
|
AVRDUDE_READ_EEPROM = -U eeprom:r:$(TARGET).bin:r
|
|
|
|
|
|
|
|
# Uncomment the following if you want avrdude's erase cycle counter.
|
|
# Note that this counter needs to be initialized first using -Yn,
|
|
# see avrdude manual.
|
|
#AVRDUDE_ERASE_COUNTER = -y
|
|
|
|
# Uncomment the following if you do /not/ wish a verification to be
|
|
# performed after programming the device.
|
|
AVRDUDE_NO_VERIFY = -V
|
|
|
|
# Increase verbosity level. Please use this when submitting bug
|
|
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
|
# to submit bug reports.
|
|
#AVRDUDE_VERBOSE = -v -v
|
|
|
|
#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
|
AVRDUDE_FLAGS = -B0.25 -p $(MCU) -c $(AVRDUDE_PROGRAMMER) -P $(AVRDUDE_PORT)
|
|
#AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
|
|
|
ifeq ($(ERAZE), NO)
|
|
AVRDUDE_FLAGS += -D
|
|
endif
|
|
|
|
#---------------- Debugging Options ----------------
|
|
|
|
# For simulavr only - target MCU frequency.
|
|
DEBUG_MFREQ = $(F_CPU)
|
|
|
|
# Set the DEBUG_UI to either gdb or insight.
|
|
DEBUG_UI = gdb
|
|
# DEBUG_UI = insight
|
|
|
|
# Set the debugging back-end to either avarice, simulavr.
|
|
#DEBUG_BACKEND = avarice
|
|
DEBUG_BACKEND = simulavr
|
|
|
|
# GDB Init Filename.
|
|
GDBINIT_FILE = __avr_gdbinit
|
|
|
|
# When using avarice settings for the JTAG
|
|
JTAG_DEV = /dev/com1
|
|
|
|
# Debugging port used to communicate between GDB / avarice / simulavr.
|
|
DEBUG_PORT = 4242
|
|
|
|
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
|
# just set to localhost unless doing some sort of crazy debugging when
|
|
# avarice is running on a different computer.
|
|
DEBUG_HOST = localhost
|
|
|
|
|
|
|
|
#============================================================================
|
|
|
|
|
|
# Define programs and commands.
|
|
SHELL = sh
|
|
CC = avr-gcc
|
|
OBJCOPY = avr-objcopy
|
|
OBJDUMP = avr-objdump
|
|
SIZE = avr-size
|
|
NM = avr-nm
|
|
AVRDUDE = avrdude
|
|
REMOVE = rm -f
|
|
REMOVEDIR = rm -rf
|
|
COPY = cp
|
|
WINSHELL = cmd
|
|
|
|
# th9x/gruvin9x-specific
|
|
XBM2LBM = ruby ../util/xbm2lbm.rb
|
|
AREV = $(shell sh -c "cat .svn/entries | sed -n '4p'")
|
|
REV = $(shell echo $$(( $(AREV) + 1 )))
|
|
|
|
|
|
# Define Messages
|
|
# English
|
|
MSG_ERRORS_NONE = Errors: none
|
|
MSG_BEGIN = -------- begin --------
|
|
MSG_END = -------- end --------
|
|
MSG_SIZE_BEFORE = Size before:
|
|
MSG_SIZE_AFTER = Size after:
|
|
MSG_COFF = Converting to AVR COFF:
|
|
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
|
MSG_FLASH = Creating load file for Flash:
|
|
MSG_EEPROM = Creating load file for EEPROM:
|
|
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
|
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
|
MSG_LINKING = Linking:
|
|
MSG_COMPILING = Compiling C:
|
|
MSG_COMPILING_CPP = Compiling C++:
|
|
MSG_ASSEMBLING = Assembling:
|
|
MSG_CLEANING = Cleaning project:
|
|
MSG_CREATING_LIBRARY = Creating library:
|
|
|
|
|
|
|
|
|
|
# Define all object files.
|
|
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
|
|
|
# Define all listing files.
|
|
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
|
|
|
|
|
# Compiler flags to generate dependency files.
|
|
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
|
|
|
|
|
|
# Combine all necessary flags and optional flags.
|
|
# Add target processor to flags.
|
|
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
|
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(AVRGCCFLAGS)
|
|
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
|
|
|
|
SUB_VER = ${shell sh -c "grep \"SUB_VERS\" gruvin9x.h | cut -d\ -f3 | egrep -o \"[[:digit:]]\""}
|
|
ABUILD_NUM = ${shell sh -c "grep \"BUILD_NUM\" stamp-gruvin9x.h | egrep -o \"[[:digit:]]+\""}
|
|
BUILD_NUM = $(shell echo $$(( $(ABUILD_NUM) + 1 )))
|
|
BUILD_DIR = $(shell pwd | awk -F'/' '{print $$((NF-1))}')
|
|
ifeq "$(USER)" "bryan"
|
|
THEUSER=gruvin
|
|
else
|
|
THEUSER=$(USER)
|
|
endif
|
|
|
|
# Default target.
|
|
all: begin gccversion sizebefore build sizeafter end
|
|
|
|
# Change the build target to build a HEX file or a library.
|
|
build: stamp font.lbm font_dblsize.lbm sticks.lbm s9xsplash.lbm elf hex eep lss sym
|
|
#build: lib
|
|
|
|
|
|
elf: $(TARGET).elf
|
|
hex: $(TARGET).hex
|
|
eep: $(TARGET).eep
|
|
lss: $(TARGET).lss
|
|
sym: $(TARGET).sym
|
|
LIBNAME=lib$(TARGET).a
|
|
lib: $(LIBNAME)
|
|
|
|
|
|
# Build stamp-file
|
|
stamp:
|
|
@echo
|
|
@echo $(CPPSRC)
|
|
|
|
@echo "Generate Version-stamp:"
|
|
@echo "//Automatically generated file (Makefile) - do not edit" > stamp-gruvin9x.h
|
|
@echo "#define DATE_STR \"`date +%Y-%m-%d`\"" >> stamp-gruvin9x.h
|
|
@echo "#define TIME_STR \"`date +%H:%I:%S`\"" >> stamp-gruvin9x.h
|
|
@echo "#define TAG_VERS $(SUB_VER)-$(THEUSER)" >> stamp-gruvin9x.h
|
|
@echo "#define SVN_VERS \"$(BUILD_DIR)-r$(REV)\"" >> stamp-gruvin9x.h
|
|
@echo "#define MOD_VERS \"$(MODS)\"" >> stamp-gruvin9x.h
|
|
@echo "#define BUILD_NUM $(BUILD_NUM)" >> stamp-gruvin9x.h
|
|
@cat stamp-gruvin9x.h
|
|
|
|
font.lbm: font_6x1.xbm
|
|
@echo
|
|
@echo "Convert font from xbm to lbm:"
|
|
$(XBM2LBM) $<
|
|
|
|
font_dblsize.lbm: font_dblsize.xbm
|
|
@echo
|
|
@echo "Convert font from xbm to lbm:"
|
|
$(XBM2LBM) $<
|
|
|
|
sticks.lbm: sticks_4x1.xbm
|
|
@echo
|
|
@echo "Convert font from xbm to lbm:"
|
|
$(XBM2LBM) $<
|
|
|
|
s9xsplash.lbm: s9xsplash.xbm
|
|
@echo
|
|
@echo "Convert font from xbm to lbm:"
|
|
$(XBM2LBM) $<
|
|
|
|
# Eye candy.
|
|
# AVR Studio 3.x does not check make's exit code but relies on
|
|
# the following magic strings to be generated by the compile job.
|
|
|
|
begin:
|
|
@echo
|
|
@echo $(MSG_BEGIN)
|
|
|
|
end:
|
|
@echo $(MSG_END)
|
|
@echo
|
|
|
|
|
|
|
|
# Display size of file.
|
|
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
|
ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
|
|
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
|
|
|
|
sizebefore:
|
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
|
|
$(AVRMEM) 2>/dev/null; echo; fi
|
|
|
|
sizeafter:
|
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
|
|
$(AVRMEM) 2>/dev/null; echo; fi
|
|
|
|
|
|
|
|
# Display compiler version information.
|
|
gccversion :
|
|
@$(CC) --version
|
|
|
|
|
|
|
|
# Program the device.
|
|
wflash: $(TARGET).hex
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
|
|
|
|
weeprom: $(TARGET).bin
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_EEPROM)
|
|
|
|
# Write flash and eeprom
|
|
wfe: $(TARGET).hex
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_EEPROM)
|
|
|
|
rflash: $(TARGET).hex
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_READ_FLASH)
|
|
|
|
reeprom: $(TARGET).bin
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_READ_EEPROM)
|
|
|
|
|
|
# Generate avr-gdb config/init file which does the following:
|
|
# define the reset signal, load the target file, connect to target, and set
|
|
# a breakpoint at main().
|
|
gdb-config:
|
|
@$(REMOVE) $(GDBINIT_FILE)
|
|
@echo define reset >> $(GDBINIT_FILE)
|
|
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
|
@echo end >> $(GDBINIT_FILE)
|
|
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
|
|
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
|
ifeq ($(DEBUG_BACKEND),simulavr)
|
|
@echo load >> $(GDBINIT_FILE)
|
|
endif
|
|
@echo break main >> $(GDBINIT_FILE)
|
|
|
|
# gruvin: added extra include and lib paths to get simu working on my Mac
|
|
FOXINC=-I/usr/local/include/fox-1.6 -I/usr/include/fox-1.6 \
|
|
-I$(FOXPATH)/include \
|
|
-I/opt/local/include/fox-1.6
|
|
FOXLIB=-L/usr/local/lib \
|
|
-L$(FOXPATH)/src/.libs \
|
|
-L/opt/local/lib \
|
|
-lFOX-1.6 \
|
|
-Wl,-rpath,$(FOXPATH)/src/.libs
|
|
|
|
LBITS := $(shell getconf LONG_BIT)
|
|
ifeq ($(LBITS),64)
|
|
ARCH=-arch x86_64
|
|
else
|
|
ARCH=
|
|
endif
|
|
|
|
simu: $(CPPSRC) Makefile simu.cpp $(CPPSRC) simpgmspace.cpp *.h *.lbm eeprom.bin
|
|
g++ simu.cpp $(CPPFLAGS) $(CPPSRC) simpgmspace.cpp $(ARCH) -MD -DSIMU -o simu $(FOXINC) $(FOXLIB)
|
|
|
|
eeprom.bin:
|
|
dd if=/dev/zero of=$@ bs=1 count=2048
|
|
|
|
debug: gdb-config $(TARGET).elf
|
|
ifeq ($(DEBUG_BACKEND),avarice)
|
|
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
|
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
|
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
|
@$(WINSHELL) /c pause
|
|
else
|
|
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
|
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
|
endif
|
|
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
|
|
|
|
|
|
|
|
|
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
|
COFFCONVERT = $(OBJCOPY) --debugging
|
|
COFFCONVERT += --change-section-address .data-0x800000
|
|
COFFCONVERT += --change-section-address .bss-0x800000
|
|
COFFCONVERT += --change-section-address .noinit-0x800000
|
|
COFFCONVERT += --change-section-address .eeprom-0x810000
|
|
|
|
|
|
coff: $(TARGET).elf
|
|
@echo
|
|
@echo $(MSG_COFF) $(TARGET).cof
|
|
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
|
|
|
|
|
|
extcoff: $(TARGET).elf
|
|
@echo
|
|
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
|
|
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
|
|
|
|
|
|
|
|
# Create final output files (.hex, .eep) from ELF output file.
|
|
%.hex: %.elf
|
|
@echo
|
|
@echo $(MSG_FLASH) $@
|
|
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
|
|
|
%.eep: %.elf
|
|
@echo
|
|
@echo $(MSG_EEPROM) $@
|
|
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
|
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
|
|
|
# Create extended listing file from ELF output file.
|
|
%.lss: %.elf
|
|
@echo
|
|
@echo $(MSG_EXTENDED_LISTING) $@
|
|
$(OBJDUMP) -h -S $< > $@
|
|
|
|
# Create a symbol table from ELF output file.
|
|
%.sym: %.elf
|
|
@echo
|
|
@echo $(MSG_SYMBOL_TABLE) $@
|
|
$(NM) -n $< > $@
|
|
|
|
|
|
|
|
# Create library from object files.
|
|
.SECONDARY : $(TARGET).a
|
|
.PRECIOUS : $(OBJ)
|
|
%.a: $(OBJ)
|
|
@echo
|
|
@echo $(MSG_CREATING_LIBRARY) $@
|
|
$(AR) $@ $(OBJ)
|
|
|
|
|
|
# Link: create ELF output file from object files.
|
|
.SECONDARY : $(TARGET).elf
|
|
.PRECIOUS : $(OBJ)
|
|
%.elf: $(OBJ)
|
|
@echo
|
|
@echo $(MSG_LINKING) $@
|
|
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
|
|
|
|
|
|
# Compile: create object files from C source files.
|
|
$(OBJDIR)/%.o : %.c
|
|
@echo
|
|
@echo $(MSG_COMPILING) $<
|
|
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
|
|
|
|
|
# Compile: create object files from C++ source files.
|
|
$(OBJDIR)/%.o : %.cpp
|
|
@echo
|
|
@echo $(MSG_COMPILING_CPP) $<
|
|
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
|
|
|
|
|
# Compile: create assembler files from C source files.
|
|
%.s : %.c
|
|
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
|
|
|
|
|
# Compile: create assembler files from C++ source files.
|
|
%.s : %.cpp
|
|
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
|
|
|
|
|
|
# Assemble: create object files from assembler source files.
|
|
$(OBJDIR)/%.o : %.S
|
|
@echo
|
|
@echo $(MSG_ASSEMBLING) $<
|
|
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
|
|
|
|
|
# Create preprocessed source for use in sending a bug report.
|
|
%.i : %.c
|
|
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
|
|
|
|
|
# Target: clean project.
|
|
clean: begin clean_list end
|
|
|
|
clean_list :
|
|
@echo
|
|
@echo $(MSG_CLEANING)
|
|
$(REMOVE) simu
|
|
$(REMOVE) gtests
|
|
$(REMOVE) gtest.a
|
|
$(REMOVE) gtest_main.a
|
|
$(REMOVE) $(TARGET).hex
|
|
$(REMOVE) $(TARGET).eep
|
|
$(REMOVE) $(TARGET).cof
|
|
$(REMOVE) $(TARGET).elf
|
|
$(REMOVE) $(TARGET).map
|
|
$(REMOVE) $(TARGET).sym
|
|
$(REMOVE) $(TARGET).lss
|
|
$(REMOVEDIR) $(OBJDIR)
|
|
$(REMOVE) $(SRC:.c=.s)
|
|
$(REMOVE) *.o
|
|
$(REMOVE) *.d
|
|
$(REMOVEDIR) .dep
|
|
|
|
|
|
# Create object files directory
|
|
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
|
|
|
|
|
# Include the dependency files.
|
|
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
|
|
|
|
|
# Listing of phony targets.
|
|
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
|
build elf hex eep lss sym coff extcoff \
|
|
clean clean_list program debug gdb-config stamp
|
|
|
|
|
|
#### GOOGLE TESTS
|
|
|
|
GTEST_DIR = ../gtest-1.6.0/
|
|
|
|
# Where to find user code.
|
|
USER_DIR = ./
|
|
|
|
# Flags passed to the preprocessor.
|
|
CPPFLAGS += -I$(GTEST_DIR)/include
|
|
|
|
# Flags passed to the C++ compiler.
|
|
CXXFLAGS += -g -Wall -Wextra
|
|
|
|
# All Google Test headers. Usually you shouldn't change this
|
|
# definition.
|
|
GTEST_HEADERS = $(GTEST_DIR)/include/gtest/*.h \
|
|
$(GTEST_DIR)/include/gtest/internal/*.h
|
|
|
|
# House-keeping build targets.
|
|
|
|
# Builds gtest.a and gtest_main.a.
|
|
|
|
# Usually you shouldn't tweak such internal variables, indicated by a
|
|
# trailing _.
|
|
GTEST_SRCS_ = $(GTEST_DIR)/src/*.cc $(GTEST_DIR)/src/*.h $(GTEST_HEADERS)
|
|
|
|
# For simplicity and to avoid depending on Google Test's
|
|
# implementation details, the dependencies specified below are
|
|
# conservative and not optimized. This is fine as Google Test
|
|
# compiles fast and for ordinary users its source rarely changes.
|
|
gtest-all.o : $(GTEST_SRCS_)
|
|
$(CXX) $(CPPFLAGS) -I$(GTEST_DIR) $(CXXFLAGS) -c \
|
|
$(GTEST_DIR)/src/gtest-all.cc
|
|
|
|
gtest_main.o : $(GTEST_SRCS_)
|
|
$(CXX) $(CPPFLAGS) -I$(GTEST_DIR) $(CXXFLAGS) -c \
|
|
$(GTEST_DIR)/src/gtest_main.cc
|
|
|
|
gtest.a : gtest-all.o
|
|
$(AR) $(ARFLAGS) $@ $^
|
|
|
|
gtest_main.a : gtest-all.o gtest_main.o
|
|
$(AR) $(ARFLAGS) $@ $^
|
|
|
|
# Builds a sample test. A test should link with either gtest.a or
|
|
# gtest_main.a, depending on whether it defines its own main()
|
|
# function.
|
|
|
|
gtests: $(CPPSRC) gtests.cpp simpgmspace.cpp *.h gtest_main.a
|
|
g++ $(CPPSRC) gtests.cpp simpgmspace.cpp $(CPPFLAGS) -I$(GTEST_DIR) $(ARCH) -o gtests -lpthread -MD -DSIMU gtest_main.a
|
|
|