Files
edgetx-gx12/radio/src/targets/taranis/board.cpp
T
6579905088 chore(hal): remove StdPeriph (#5023)
Co-authored-by: raphaelcoeffic <1050031+raphaelcoeffic@users.noreply.github.com>
Co-authored-by: Malte Langermann <malte@langermann.net>
Co-authored-by: 3djc <3djc@gh.com>
Co-authored-by: Richard Li <richard.li@ces.hk>
2024-06-01 11:45:40 +10:00

361 lines
8.2 KiB
C++

/*
* Copyright (C) EdgeTX
*
* Based on code named
* opentx - https://github.com/opentx/opentx
* th9x - http://code.google.com/p/th9x
* er9x - http://code.google.com/p/er9x
* gruvin9x - http://code.google.com/p/gruvin9x
*
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "stm32_hal_ll.h"
#include "stm32_gpio.h"
#include "stm32_ws2812.h"
#include "hal/adc_driver.h"
#include "hal/trainer_driver.h"
#include "hal/switch_driver.h"
#include "hal/module_port.h"
#include "hal/abnormal_reboot.h"
#include "hal/usb_driver.h"
#include "hal/gpio.h"
#include "board.h"
#include "boards/generic_stm32/module_ports.h"
#include "boards/generic_stm32/intmodule_heartbeat.h"
#include "boards/generic_stm32/analog_inputs.h"
#include "boards/generic_stm32/rgb_leds.h"
#include "debug.h"
#include "rtc.h"
#include "timers_driver.h"
#include "dataconstants.h"
#include "trainer.h"
#if defined(FLYSKY_GIMBAL)
#include "flysky_gimbal_driver.h"
#endif
#if !defined(BOOT)
#include "opentx.h"
#if defined(PXX1)
#include "pulses/pxx1.h"
#endif
#endif
#if defined(BLUETOOTH)
#include "bluetooth_driver.h"
#endif
HardwareOptions hardwareOptions;
#if !defined(BOOT)
#if defined(FUNCTION_SWITCHES)
#include "storage/storage.h"
#endif
void boardInit()
{
LL_APB1_GRP1_EnableClock(AUDIO_RCC_APB1Periph);
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
#if defined(BLUETOOTH) && !defined(PCBX9E)
bluetoothInit(BLUETOOTH_DEFAULT_BAUDRATE, true);
#endif
#if defined(MANUFACTURER_RADIOMASTER) && defined(STM32F407xx)
void board_set_bor_level();
board_set_bor_level();
#endif
board_trainer_init();
// Sets 'hardwareOption.pcbrev' as well
pwrInit();
boardInitModulePorts();
#if defined(INTERNAL_MODULE_PXX1) && defined(PXX_FREQUENCY_HIGH)
pxx1SetInternalBaudrate(PXX1_FAST_SERIAL_BAUDRATE);
#endif
#if defined(INTMODULE_HEARTBEAT) && \
(defined(INTERNAL_MODULE_PXX1) || defined(INTERNAL_MODULE_PXX2))
pulsesSetModuleInitCb(_intmodule_heartbeat_init);
pulsesSetModuleDeInitCb(_intmodule_heartbeat_deinit);
trainerSetChangeCb(_intmodule_heartbeat_trainer_hook);
#endif
// #if defined(AUTOUPDATE)
// telemetryPortInit(FRSKY_SPORT_BAUDRATE, TELEMETRY_SERIAL_WITHOUT_DMA);
// sportSendByteLoop(0x7E);
// #endif
#if defined(STATUS_LEDS)
ledInit();
#if defined(MANUFACTURER_RADIOMASTER) || defined(MANUFACTURER_JUMPER) || defined(RADIO_COMMANDO8)
ledBlue();
#else
ledGreen();
#endif
#endif
// If the radio was powered on by dual use USB, halt the boot process, let battery charge
// TODO: needs refactoring if any other manufacturer implements either of the following:
// - function switches and the radio supports charging
// - single USB for data + charge which powers on radio
#if defined(MANUFACTURER_JUMPER)
// This is needed to prevent radio from starting when usb is plugged to charge
usbInit();
// prime debounce state...
usbPlugged();
if (usbPlugged()) {
delaysInit();
adcInit(&_adc_driver);
getADC();
pwrOn(); // required to get bat adc reads
INTERNAL_MODULE_OFF();
EXTERNAL_MODULE_OFF();
delay_ms(2000); // let this stabilize
while (usbPlugged()) {
// // Let it charge ...
getADC(); // Warning: the value read does not include VBAT calibration
delay_ms(20);
#if defined(FUNCTION_SWITCHES)
// Support for FS Led to indicate battery charge level
if (getBatteryVoltage() >= 660) fsLedOn(0);
if (getBatteryVoltage() >= 700) fsLedOn(1);
if (getBatteryVoltage() >= 740) fsLedOn(2);
if (getBatteryVoltage() >= 780) fsLedOn(3);
if (getBatteryVoltage() >= 820) fsLedOn(4);
if (getBatteryVoltage() >= 842) fsLedOn(5);
#elif defined(STATUS_LEDS)
// Use Status LED to indicate battery charge level instead
if (getBatteryVoltage() <= 660) ledRed(); // low discharge
else if (getBatteryVoltage() <= 842) ledBlue(); // charging
else ledGreen(); // charging done
delay_ms(1000);
#endif
}
pwrOff();
}
#endif
keysInit();
switchInit();
#if defined(ROTARY_ENCODER_NAVIGATION)
rotaryEncoderInit();
#endif
delaysInit();
__enable_irq();
#if defined(PWM_STICKS)
sticksPwmDetect();
#endif
#if defined(FLYSKY_GIMBAL)
flysky_gimbal_init();
#endif
if (!adcInit(&_adc_driver))
TRACE("adcInit failed");
lcdInit(); // delaysInit() must be called before
audioInit();
timersInit();
usbInit();
#if defined(LED_STRIP_GPIO)
extern const stm32_pulse_timer_t _led_timer;
ws2812_init(&_led_timer, LED_STRIP_LENGTH);
for (uint8_t i = 0; i < LED_STRIP_LENGTH; i++) {
ws2812_set_color(i, 0, 0, 50);
}
ws2812_update(&_led_timer);
#endif
#if defined(DEBUG) && defined(AUX_SERIAL)
serialSetMode(SP_AUX1, UART_MODE_DEBUG); // indicate AUX1 is used
serialInit(SP_AUX1, UART_MODE_DEBUG); // early AUX1 init
#endif
#if defined(HAPTIC)
hapticInit();
#endif
#if defined(PXX2_PROBE)
intmodulePxx2Probe();
#endif
#if defined(DEBUG)
// Freeze timers & watchdog when core is halted
DBGMCU->APB1FZ = 0x00E009FF;
DBGMCU->APB2FZ = 0x00070003;
#endif
#if defined(PWR_BUTTON_PRESS)
if (WAS_RESET_BY_WATCHDOG_OR_SOFTWARE()) {
pwrOn();
}
#endif
#if defined(TOPLCD_GPIO)
toplcdInit();
#endif
#if defined(USB_CHARGER)
usbChargerInit();
#endif
#if defined(JACK_DETECT_GPIO)
initJackDetect();
#endif
initSpeakerEnable();
enableSpeaker();
initHeadphoneTrainerSwitch();
#if defined(RTCLOCK)
rtcInit(); // RTC must be initialized before rambackupRestore() is called
#endif
backlightInit();
#if defined(GUI)
lcdSetContrast(true);
#endif
}
#endif
void boardOff()
{
#if defined(STATUS_LEDS) && !defined(BOOT)
ledOff();
#endif
BACKLIGHT_DISABLE();
#if defined(TOPLCD_GPIO) && !defined(BOOT)
toplcdOff();
#endif
#if defined(PWR_BUTTON_PRESS)
while (pwrPressed()) {
WDG_RESET();
}
#endif
#if defined(MANUFACTURER_RADIOMASTER) && defined(STM32F407xx)
lcdInit();
#endif
lcdOff();
SysTick->CTRL = 0; // turn off systick
pwrOff();
// disable interrupts
__disable_irq();
while (1) {
WDG_RESET();
#if defined(PWR_BUTTON_PRESS)
// X9E/X7 needs watchdog reset because CPU is still running while
// the power key is held pressed by the user.
// The power key should be released by now, but we must make sure
if (!pwrPressed()) {
// Put the CPU into sleep to reduce the consumption,
// it might help with the RTC reset issue
PWR->CR |= PWR_CR_CWUF;
/* Select STANDBY mode */
PWR->CR |= PWR_CR_PDDS;
/* Set SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
/* Request Wait For Event */
__WFE();
}
#endif
}
// this function must not return!
}
#if defined(AUDIO_SPEAKER_ENABLE_GPIO)
void initSpeakerEnable()
{
gpio_init(AUDIO_SPEAKER_ENABLE_GPIO, GPIO_OUT, GPIO_PIN_SPEED_LOW);
}
void enableSpeaker()
{
gpio_set(AUDIO_SPEAKER_ENABLE_GPIO);
}
void disableSpeaker()
{
gpio_clear(AUDIO_SPEAKER_ENABLE_GPIO);
}
#endif
#if defined(HEADPHONE_TRAINER_SWITCH_GPIO)
void initHeadphoneTrainerSwitch()
{
gpio_init(HEADPHONE_TRAINER_SWITCH_GPIO, GPIO_OUT, GPIO_PIN_SPEED_LOW);
}
void enableHeadphone()
{
gpio_clear(HEADPHONE_TRAINER_SWITCH_GPIO);
}
void enableTrainer()
{
gpio_set(HEADPHONE_TRAINER_SWITCH_GPIO);
}
#endif
#if defined(JACK_DETECT_GPIO)
void initJackDetect(void)
{
gpio_init(JACK_DETECT_GPIO, GPIO_IN_PU, GPIO_PIN_SPEED_LOW);
}
bool isJackPlugged()
{
// debounce
static bool debounced_state = 0;
static bool last_state = 0;
if (gpio_read(JACK_DETECT_GPIO)) {
if (!last_state) {
debounced_state = false;
}
last_state = false;
}
else {
if (last_state) {
debounced_state = true;
}
last_state = true;
}
return debounced_state;
}
#endif