2208 lines
73 KiB
Makefile
2208 lines
73 KiB
Makefile
# !!!! BETA Makefile !!!!
|
|
# !!!! Use at own risk !!!!
|
|
#----------------------------------------------------------------------------
|
|
# On command line:
|
|
#
|
|
# make all = Make software.
|
|
#
|
|
# make clean = Clean out built project files.
|
|
#
|
|
# make install = Install the most recently compiled hex file.
|
|
#
|
|
# make filename.s = Just compile filename.c into the assembler code only.
|
|
#
|
|
# make filename.i = Create a preprocessed source file for use in submitting
|
|
# bug reports to the GCC project.
|
|
#
|
|
# To rebuild project do "make clean" then "make all".
|
|
#----------------------------------------------------------------------------
|
|
|
|
#----------- INSTALL OPTIONS ---------------------------
|
|
|
|
# Data directory we write hex files to.
|
|
DATA_DIR = /tmp
|
|
|
|
# Backup the old flash (YES, NO)
|
|
BACKUP_FLASH = YES
|
|
|
|
# Backup the old EEPROM (YES, NO)
|
|
BACKUP_EEPROM = YES
|
|
|
|
# Restore EEPROM to 9x (YES, NO) (will set BACKUP_EEPROM to YES).
|
|
RESTORE_EEPROM = NO
|
|
|
|
# Double write OK (YES, NO)
|
|
# Set this *if only if* your programmer can correctly write the EEPROM
|
|
# and FLASH in one command. If it doesn't, try setting the 9x fuse to
|
|
# not erase the eeprom when you erase the flash.
|
|
DOUBLE_WRITE_OK = NO
|
|
|
|
# Command to read/write FLASH/EEPROM images. Currently
|
|
# Must have avrdude interface
|
|
AVRDUDE = /usr/local/bin/avrdude
|
|
|
|
# Device options for AVRDUDE Command.
|
|
AVRDEVICE = -c usbasp -p m64
|
|
|
|
# Delay to start second AVRDUDE command (required by some).
|
|
DELAY = 5
|
|
|
|
#----------- BUILD OPTIONS ---------------------------
|
|
|
|
# PCB version
|
|
# Values: 9X, 9X128, 9X2561, 9XR, 9XR128, 9XR2561, GRUVIN9X, MEGA2560, SKY9X, 9XRPRO, AR9X, TARANIS
|
|
# Old values STD and STD128 are mapped to 9X and 9X128 for compatibility
|
|
PCB = 9X
|
|
|
|
# PCB revision
|
|
PCBREV =
|
|
|
|
# LCD
|
|
# Values: DEFAULT, ST7565P, ST7565R, ERC12864FSF, ST7920
|
|
LCD = DEFAULT
|
|
|
|
# Enable JETI-Telemetry or FrSky Telemetry reception on UART0
|
|
# For this option you need to modify your hardware!
|
|
# More information at [insertURLhere]
|
|
# Values = STD, FRSKY, FRSKY_SPORT, JETI, NMEA, ARDUPILOT, MAVLINK, TELEMETREZ
|
|
EXT = STD
|
|
|
|
# GUI enabled
|
|
# Values = YES, NO
|
|
GUI = YES
|
|
|
|
# FAI mode
|
|
# Values = YES, NO, CHOICE
|
|
FAI = NO
|
|
|
|
# the latests deliveries for Turnigy 9x transmitters (since 2 years now, 2014) do not stop sending if no pulses are generated.
|
|
# This fact totally breaks the nice throttle and switch warning concept, because even we prevent sending pulses the
|
|
# transmitter module ignores this, and continues to send the last value or 0 at beginning. And 0 means in the middle of throttle -> 50%.
|
|
# To cope with this situation, we need a new concept how to handle throttle and switch warnings.
|
|
# if you have a 0 value (50% ) for throttle, while throttle warning is active, you should activate this switch
|
|
# Values = YES, NO
|
|
TURNIGY_TRANSMITTER_FIX = NO
|
|
|
|
# Enable heli menu
|
|
# Values = YES, NO
|
|
HELI = NO
|
|
|
|
# Enable templates menu
|
|
# Values = YES, NO
|
|
TEMPLATES = $(GUI)
|
|
|
|
# Enable navigation with Pots / Sticks / Rotary encoders
|
|
# Values = NO
|
|
# POT1 (only POT1 available for fields modification),
|
|
# POT2 (menus scroll),
|
|
# POT3 (cursor down/up),
|
|
# POTS (POT1, POT2, POT3),
|
|
# STICKS
|
|
# ROTENC (Rotary encoder)
|
|
NAVIGATION = NO
|
|
|
|
# Switches automatic selection
|
|
# Values = YES, NO
|
|
AUTOSWITCH = NO
|
|
|
|
# Stock sticks replaced by FrSky ones
|
|
# Values = YES, NO
|
|
FRSKY_STICKS = NO
|
|
|
|
# Sources automatic selection
|
|
# Values = YES, NO
|
|
AUTOSOURCE = NO
|
|
|
|
# Double keys support (+/- means invert, +/up means max, -/dwn means min, up/down means reset to default)
|
|
# Values = YES, NO
|
|
DBLKEYS = NO
|
|
|
|
# AUDIO Mods
|
|
# Values = YES, NO
|
|
AUDIO = NO
|
|
|
|
# VOICE Mods
|
|
# Values = YES, NO
|
|
VOICE = NO
|
|
|
|
# corrects different rounding for negative values. So instead of -99.9 you will see again -100.0
|
|
# Values = YES, NO
|
|
CORRECT_NEGATIVE_VALUES = YES
|
|
|
|
# adds additional code to prevent arithmetic overflows. MAX or MIN values stays. Not yet guaranteed!! Just improved
|
|
# Values = YES, NO
|
|
ARITHMETIC_OVERFLOW_CHECK = NO
|
|
|
|
# increases resolution for throttle statistics and throttle counting, in very rare cases.
|
|
# this will be only true if an output channel is used for throttle calculation, and this channel has changed limits, e.g. -90% to +80%
|
|
# if you use standard limits for throttle or directly the throttle stick you do not need to bother about this option
|
|
# not valid for ARM based transmitters like Taranis, They do not have this rounding issue at all
|
|
# Values = YES, NO
|
|
ACCURAT_THROTTLE_STATS = NO
|
|
|
|
# HAPTIC Mods
|
|
# Values = YES, NO
|
|
HAPTIC = NO
|
|
|
|
# SmartieParts 2.2 Backlight support (inverted)
|
|
# Values = YES, NO
|
|
SP22 = NO
|
|
|
|
# Fade Backlight using PWM
|
|
# Values = YES, NO
|
|
PWM_BACKLIGHT = NO
|
|
|
|
# SPLASH on START
|
|
# Values = YES, NO, FIXED
|
|
SPLASH = $(GUI)
|
|
|
|
# GRAPHICS (sliders / checkboxes / bold / batt graph)
|
|
GRAPHICS = YES
|
|
BOLD = YES
|
|
BATTGRAPH = NO
|
|
|
|
# FONT TYPE
|
|
# Values = STD, SQT5
|
|
FONT = STD
|
|
|
|
# PPM center adjustable
|
|
# Values = YES, NO
|
|
PPM_CENTER_ADJUSTABLE = NO
|
|
|
|
# PPM symmetrical limits
|
|
# Values = YES, NO
|
|
PPM_LIMITS_SYMETRICAL = NO
|
|
|
|
# PPM display unit
|
|
# Values = PERCENT_PREC1, PERCENT_PREC0, US
|
|
PPM_UNIT = PERCENT_PREC1
|
|
|
|
# OverrideCHxx functions enable
|
|
# Values = YES, NO
|
|
OVERRIDE_CHANNEL_FUNCTION = YES
|
|
|
|
# Dangerous functions available in Custom Functions (range test, bind, module off)
|
|
# Values = YES, NO
|
|
DANGEROUS_MODULE_FUNCTIONS = NO
|
|
|
|
# FrSky Hub
|
|
# Values = YES, NO
|
|
FRSKY_HUB = YES
|
|
|
|
# FrSky FAS current sensor offset compensation
|
|
# Values = YES, NO
|
|
FAS_OFFSET = NO
|
|
|
|
# WS HowHigh
|
|
# Values = YES, NO
|
|
WS_HOW_HIGH = YES
|
|
|
|
# Gauges in Telemetry screen
|
|
# Values = YES, NO
|
|
GAUGES = YES
|
|
|
|
# GPS
|
|
# Values = YES, NO
|
|
GPS = YES
|
|
|
|
# Vario
|
|
# Values = YES, NO
|
|
VARIO = YES
|
|
|
|
# RTCLOCK
|
|
# Values = YES, NO
|
|
# default = YES (means enabled when available)
|
|
RTCLOCK = YES
|
|
|
|
# Hardware volume
|
|
# Values = YES, NO
|
|
# default = YES (AR9X board doesn't have a hardware volume control as delivered but it can be fitted optionally)
|
|
HARDWARE_VOLUME = YES
|
|
|
|
# BLUETOOTH
|
|
# Values = YES, NO
|
|
BLUETOOTH = NO
|
|
|
|
# PXX (FrSky PCM) protocol
|
|
PXX = NO
|
|
|
|
# DSM2 (Spektrum) protocol
|
|
# Values = NO, SERIAL, PPM
|
|
DSM2 = NO
|
|
|
|
# HUBSAN protocol
|
|
# Values = NO, YES
|
|
HUBSAN = NO
|
|
|
|
# DSM/PPM TX caddy PCB (Gruvin)
|
|
# For auto-switching switching between DSM2/X and Fr-Sky transmitter modules
|
|
# Values = YES, NO
|
|
TX_CADDY = NO
|
|
|
|
#IR protocols (SILV / TRAC09 / PICZ / SWIFT)
|
|
IRPROTOS = NO
|
|
|
|
# TRANSLATIONS
|
|
# Values = cz, de, en, fi, fr, it, se, es, pl, pt, nl
|
|
TRANSLATIONS = EN
|
|
|
|
# TTS
|
|
# Values = en, fr, hu
|
|
TTS = $(TRANSLATIONS)
|
|
|
|
# UNITS
|
|
# Values = imperial, metric
|
|
UNITS = METRIC
|
|
|
|
# Default Tx Mode
|
|
# Values = NO / 1 / 2 / 3 / 4
|
|
DEFAULT_MODE = NO
|
|
|
|
# EEPROM_PROGRESS_BAR
|
|
# Values = YES, NO
|
|
EEPROM_PROGRESS_BAR = NO
|
|
|
|
# Shutdown confirmation (for boards which have soft power)
|
|
# Values = NO, YES
|
|
SHUTDOWN_CONFIRMATION = NO
|
|
|
|
# Activates the DEBUG Mode (all boards)
|
|
# On G9X V4 board, when VOICE=NO:
|
|
# PORTH:7 --> Transition LOW to HIGH = start of setupPulses(). Transition HIGH to LOW = end of setupPulses().
|
|
# PORTH:6 --> LOW->HIGH = start of mixer calcs. HIGH->LOW, end of mixer calcs.
|
|
# Values = YES, NO
|
|
DEBUG = NO
|
|
|
|
# Activate Command Line Interpreter
|
|
# Values = NO, YES
|
|
CLI = NO
|
|
|
|
# Activate writing of SPORT telemetry received data to sport.log file
|
|
# Values = YES, NO
|
|
SPORT_FILE_LOG = NO
|
|
|
|
# Timers Count
|
|
# Values = 1, 2, 3 (on ARM boards)
|
|
TIMERS = 2
|
|
|
|
# Flight Modes
|
|
# Values = YES, NO
|
|
FLIGHT_MODES = YES
|
|
|
|
# Curves
|
|
# Values = YES, NO
|
|
CURVES = YES
|
|
|
|
# Global Vars
|
|
# Values = YES, NO
|
|
GVARS = NO
|
|
|
|
# Enable another 3 positions switch to replace a pot
|
|
# Values = NO, POT1, POT2, POT3,
|
|
3POS = NO
|
|
|
|
# Lua interpreter embedded
|
|
# Values = NO, NO_MODEL_SCRIPTS, YES
|
|
LUA = NO
|
|
|
|
# Menu Lock modes
|
|
# Values = NO, READONLY, NOMENUS
|
|
MENUS_LOCK = NO
|
|
|
|
# USB options in the main image
|
|
# Values = JOYSTICK, MASSSTORAGE, SERIAL
|
|
# JOYSTICK: The TX will appear as a joystick
|
|
# MASSSTORAGE: The TX will appear as a drive
|
|
# SERIAL: The TX will appear as a serial port
|
|
USB = JOYSTICK
|
|
|
|
# Mixers monitor view added to Channels monitor one
|
|
# Values = NO, YES
|
|
# YES - Adds mixers output view to Channels monitor screen,
|
|
# pressing [ENT] switches between views.
|
|
# NO - classic Channels monitor
|
|
MIXERS_MONITOR = NO
|
|
|
|
# Use newlib-nano
|
|
# Values = NO, YES
|
|
NANO = NO
|
|
|
|
# Use custom bin based allocator for Lua
|
|
# Values = NO, YES
|
|
# YES - use our bin based allocator
|
|
# NO - use default Lua allocator
|
|
USE_BIN_ALLOCATOR = NO
|
|
|
|
# Enable trace of events into Trace Buffer for debugging purposes
|
|
# Activating any of these options also activates DEBUG and DEBUG_TRACE_BUFFER
|
|
# Values = NO, YES
|
|
# TRACE_SD_CARD SD card operations (read, write, etc)
|
|
# TRACE_FATFS FatFs file operations
|
|
# TRACE_AUDIO Audio processing (not yet implemented)
|
|
TRACE_SD_CARD = NO
|
|
TRACE_FATFS = NO
|
|
TRACE_AUDIO = NO
|
|
|
|
# Enable double buffering for LCD. Only for TARANIS PLUS and 9XE targets.
|
|
# Activating requires about 6kB of RAM, but it enables menus task to
|
|
# immediately start to compose a new LCD image while the current one is
|
|
# being written to LCD by DMA.
|
|
# If this option is NO, then first function that affects LCD buffer is
|
|
# delayed until DMA transfer is finished.
|
|
# Values = NO, YES
|
|
LCD_DUAL_BUFFER = NO
|
|
|
|
# Enable internal module PPM mode for Taranis
|
|
# Values = NO, YES
|
|
TARANIS_INTERNAL_PPM = NO
|
|
|
|
# Support for D16-EU only (no D8, no LR12 which are not EU compatible)
|
|
# Value = NO, YES
|
|
SUPPORT_D16_EU_ONLY = NO
|
|
|
|
# Enable disk IO simulation in simulator
|
|
# Simulator will use FatFs module and simulated IO layer that
|
|
# uses "./sdcard.image" file as image of SD card.
|
|
# This file must contain whole SD card from first to last sector
|
|
# Values = NO, YES
|
|
SIMU_DISKIO = NO
|
|
|
|
# Enable audio in simulator
|
|
# Values = NO, YES
|
|
SIMU_AUDIO = NO
|
|
|
|
# Enable Watchdog test (DANGEROUS)
|
|
# Values = NO, YES
|
|
WATCHDOG_TEST = NO
|
|
|
|
# Treat compiler warnings as errors
|
|
# Values = NO, YES
|
|
WARNINGS_AS_ERRORS = NO
|
|
|
|
# Enable saving of Lua byte-code of all loaded scripts
|
|
# Values = NO, YES
|
|
LUA_COMPILER = NO
|
|
|
|
#------- END BUILD OPTIONS ---------------------------
|
|
|
|
# Define programs and commands.
|
|
SHELL = sh
|
|
|
|
IMG2LBM = -python ../util/img2lbm.py
|
|
BIN2LBM = -python ../util/bin2lbm.py
|
|
ifeq ($(OS), Windows_NT)
|
|
FONT2PNG = -python ../util/font2png.py
|
|
else
|
|
FONT2PNG = -xvfb-run --server-args="-screen 0 1024x768x24" python ../util/font2png.py
|
|
endif
|
|
TRANSLATE = -python ../util/translate.py
|
|
|
|
VERSION_MAJOR = 2
|
|
VERSION_MINOR = 2
|
|
VERSION_REVISION = 0
|
|
|
|
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_REVISION)$(OPENTX_VERSION_SUFFIX)
|
|
|
|
THIRDPARTY = thirdparty
|
|
COOSDIR = $(THIRDPARTY)/CoOS
|
|
FATFSDIR = $(THIRDPARTY)/FatFs
|
|
LUADIR = $(THIRDPARTY)/Lua/src
|
|
|
|
SRC =
|
|
CPPSRC =
|
|
INCDIRS = . translations
|
|
LUADEP =
|
|
DEBUG_TRACE_BUFFER = NO
|
|
|
|
# MCU name
|
|
ifneq ($(PCB), $(filter $(PCB), STD 9X 9XR STD128 9X128 9XR128 9X2561 9XR2561 GRUVIN9X MEGA2560 SKY9X 9XRPRO AR9X TARANIS FLAMENCO HORUS))
|
|
$(error Sorry, the PCB $(PCB) is not supported yet in OpenTX)
|
|
endif
|
|
|
|
GVARS_VARIANT = +1
|
|
FRSKY_VARIANT = +2
|
|
3POS_VARIANT = +4
|
|
MAVLINK_VARIANT = +8
|
|
M128_VARIANT = +32768
|
|
M2561_VARIANT = +16384
|
|
EEPROM_VARIANT = 0
|
|
|
|
GUIMODELSRC = gui/$(GUIDIRECTORY)/menu_model.cpp gui/$(GUIDIRECTORY)/menu_model_select.cpp gui/$(GUIDIRECTORY)/menu_model_setup.cpp gui/$(GUIDIRECTORY)/menu_model_inputs_mixes.cpp gui/$(GUIDIRECTORY)/menu_model_limits.cpp gui/$(GUIDIRECTORY)/menu_model_logical_switches.cpp gui/$(GUIDIRECTORY)/menu_model_custom_functions.cpp gui/$(GUIDIRECTORY)/menu_model_telemetry.cpp
|
|
GUIGENERALSRC = gui/$(GUIDIRECTORY)/menu_general.cpp gui/$(GUIDIRECTORY)/menu_general_setup.cpp gui/$(GUIDIRECTORY)/menu_general_trainer.cpp gui/$(GUIDIRECTORY)/menu_general_version.cpp gui/$(GUIDIRECTORY)/menu_general_calib.cpp
|
|
|
|
BITMAPS = bitmaps/sticks.lbm
|
|
|
|
FONTS = $(patsubst %.png,%.lbm,$(wildcard fonts/std/*.png))
|
|
|
|
ifeq ($(PCB), $(filter $(PCB), STD 9X 9XR))
|
|
# 9x/9xr radio
|
|
GUIDIRECTORY = 9x
|
|
ARCH = AVR
|
|
LCDSIZE = 128
|
|
TRGT = avr-
|
|
MCU = atmega64
|
|
OPT = s
|
|
SDCARD = NO
|
|
THR_TRACE = NO
|
|
INCDIRS += targets/9x
|
|
CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM64 -DEEPROM -DEEPROM_RLC -DEEPROM_VARIANT=$(shell echo ${EEPROM_VARIANT} | bc)
|
|
BOARDSRC = main_avr.cpp targets/9x/board_stock.cpp
|
|
EXTRABOARDSRC = targets/common_avr/adc_driver.cpp targets/common_avr/telemetry_driver.cpp
|
|
ifeq ($(GUI), YES)
|
|
EXTRABOARDSRC += targets/9x/lcd_driver.cpp
|
|
endif
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_rlc.cpp
|
|
PULSESSRC = pulses/pulses_avr.cpp
|
|
CPPSRC += debug.cpp
|
|
BITMAPS += bitmaps/9x/splash.lbm bitmaps/9x/asterisk.lbm bitmaps/9x/about.lbm
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_diagkeys.cpp gui/$(GUIDIRECTORY)/menu_general_diaganas.cpp
|
|
|
|
ifeq ($(PCB), 9XR)
|
|
FLAVOUR = 9xr
|
|
CPPDEFS += -DPCB9XR
|
|
else
|
|
FLAVOUR = 9x
|
|
CPPDEFS += -DPCB9X
|
|
endif
|
|
|
|
ifeq ($(TELEMETRY_MOD), 14051)
|
|
CPPDEFS += -DTELEMETRY_MOD_14051
|
|
endif
|
|
|
|
ifeq ($(TELEMETRY_MOD), 14051_SWAPPED)
|
|
CPPDEFS += -DTELEMETRY_MOD_14051_SWAPPED
|
|
endif
|
|
|
|
ifeq ($(AUDIO), YES)
|
|
CPPDEFS += -DAUDIO
|
|
CPPSRC += audio_avr.cpp
|
|
BUZZER = NO
|
|
else
|
|
BUZZER = YES
|
|
endif
|
|
|
|
ifeq ($(BUZZER), YES)
|
|
CPPDEFS += -DBUZZER
|
|
CPPSRC += buzzer.cpp
|
|
endif
|
|
|
|
ifeq ($(VOICE), YES)
|
|
CPPDEFS += -DVOICE
|
|
CPPSRC += targets/9x/voice.cpp
|
|
endif
|
|
|
|
ifeq ($(PWM_BACKLIGHT), YES)
|
|
ifeq ($(VOICE), YES)
|
|
$(error Sorry, PWM_BACKLIGHT doesnt work on stock board with VOICE mod)
|
|
endif
|
|
ifeq ($(AUDIO), YES)
|
|
$(error Sorry, PWM_BACKLIGHT doesnt work on stock board with AUDIO mod)
|
|
endif
|
|
CPPDEFS += -DPWM_BACKLIGHT
|
|
endif
|
|
|
|
ifeq ($(HAPTIC), YES)
|
|
CPPDEFS += -DHAPTIC
|
|
CPPSRC += haptic.cpp
|
|
endif
|
|
|
|
ifeq ($(SP22), YES)
|
|
CPPDEFS += -DSP22
|
|
endif
|
|
|
|
ifeq ($(FAS_OFFSET), YES)
|
|
CPPDEFS += -DFAS_OFFSET
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PCB), $(filter $(PCB), STD128 9X128 9XR128))
|
|
# 9X/9XR radio with ATmega64 replaced by ATmega128
|
|
GUIDIRECTORY = 9x
|
|
ARCH = AVR
|
|
LCDSIZE = 128
|
|
TRGT = avr-
|
|
MCU = atmega128
|
|
OPT = s
|
|
SDCARD = NO
|
|
THR_TRACE = NO
|
|
EEPROM_VARIANT += ${M128_VARIANT}
|
|
CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM128 -DEEPROM -DEEPROM_RLC -DEEPROM_VARIANT=$(shell echo ${EEPROM_VARIANT} | bc)
|
|
INCDIRS += targets/9x
|
|
BOARDSRC = main_avr.cpp targets/9x/board_stock.cpp
|
|
EXTRABOARDSRC = targets/common_avr/adc_driver.cpp targets/9x/lcd_driver.cpp targets/common_avr/telemetry_driver.cpp
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_rlc.cpp
|
|
PULSESSRC = pulses/pulses_avr.cpp
|
|
CPPSRC += debug.cpp
|
|
BITMAPS += bitmaps/9x/splash.lbm bitmaps/9x/asterisk.lbm bitmaps/9x/about.lbm
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_diagkeys.cpp gui/$(GUIDIRECTORY)/menu_general_diaganas.cpp
|
|
|
|
ifeq ($(PCB), 9XR128)
|
|
FLAVOUR = 9xr128
|
|
CPPDEFS += -DPCB9XR128
|
|
else
|
|
FLAVOUR = 9x128
|
|
CPPDEFS += -DPCB9X128
|
|
endif
|
|
|
|
ifeq ($(TELEMETRY_MOD), 14051)
|
|
CPPDEFS += -DTELEMETRY_MOD_14051
|
|
endif
|
|
|
|
ifeq ($(TELEMETRY_MOD), 14051_SWAPPED)
|
|
CPPDEFS += -DTELEMETRY_MOD_14051_SWAPPED
|
|
endif
|
|
|
|
ifeq ($(AUDIO), YES)
|
|
CPPDEFS += -DAUDIO
|
|
CPPSRC += audio_avr.cpp
|
|
BUZZER = NO
|
|
else
|
|
BUZZER = YES
|
|
endif
|
|
|
|
ifeq ($(BUZZER), YES)
|
|
CPPDEFS += -DBUZZER
|
|
CPPSRC += buzzer.cpp
|
|
endif
|
|
|
|
ifeq ($(VOICE), YES)
|
|
CPPDEFS += -DVOICE
|
|
CPPSRC += targets/9x/voice.cpp
|
|
endif
|
|
|
|
ifeq ($(PWM_BACKLIGHT), YES)
|
|
ifeq ($(VOICE), YES)
|
|
$(error Sorry, PWM_BACKLIGHT doesnt work on stock board with VOICE mod)
|
|
endif
|
|
ifeq ($(AUDIO), YES)
|
|
$(error Sorry, PWM_BACKLIGHT doesnt work on stock board with AUDIO mod)
|
|
endif
|
|
CPPDEFS += -DPWM_BACKLIGHT
|
|
endif
|
|
|
|
ifeq ($(HAPTIC), YES)
|
|
CPPDEFS += -DHAPTIC
|
|
CPPSRC += haptic.cpp
|
|
endif
|
|
|
|
ifeq ($(SP22), YES)
|
|
CPPDEFS += -DSP22
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PCB), $(filter $(PCB), 9X2561))
|
|
# 9X/9XR radio with ATmega64 replaced by ATmega2561
|
|
GUIDIRECTORY = 9x
|
|
ARCH = AVR
|
|
LCDSIZE = 128
|
|
TRGT = avr-
|
|
MCU = atmega2561
|
|
OPT = s
|
|
SDCARD = NO
|
|
THR_TRACE = YES
|
|
EEPROM_VARIANT += ${M2561_VARIANT}
|
|
CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM2561 -DEEPROM -DEEPROM_RLC -DEEPROM_VARIANT=$(shell echo ${EEPROM_VARIANT} | bc)
|
|
INCDIRS += targets/9x
|
|
BOARDSRC = main_avr.cpp targets/9x/board_stock.cpp
|
|
EXTRABOARDSRC = targets/common_avr/adc_driver.cpp targets/9x/lcd_driver.cpp targets/common_avr/telemetry_driver.cpp
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_rlc.cpp
|
|
PULSESSRC = pulses/pulses_avr.cpp
|
|
CPPSRC += debug.cpp
|
|
BITMAPS += bitmaps/9x/splash.lbm bitmaps/9x/asterisk.lbm bitmaps/9x/about.lbm
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_diagkeys.cpp gui/$(GUIDIRECTORY)/menu_general_diaganas.cpp
|
|
|
|
ifeq ($(PCB), 9XR2561)
|
|
FLAVOUR = 9xr2561
|
|
CPPDEFS += -DPCB9XR2561
|
|
else
|
|
FLAVOUR = 9x2561
|
|
CPPDEFS += -DPCB9X2561
|
|
endif
|
|
|
|
ifeq ($(AUDIO), YES)
|
|
CPPDEFS += -DAUDIO
|
|
CPPSRC += audio_avr.cpp
|
|
BUZZER = NO
|
|
else
|
|
BUZZER = YES
|
|
endif
|
|
|
|
ifeq ($(BUZZER), YES)
|
|
CPPDEFS += -DBUZZER
|
|
CPPSRC += buzzer.cpp
|
|
endif
|
|
|
|
ifeq ($(VOICE), YES)
|
|
CPPDEFS += -DVOICE
|
|
CPPSRC += targets/9x/voice.cpp
|
|
endif
|
|
|
|
ifeq ($(PWM_BACKLIGHT), YES)
|
|
ifeq ($(VOICE), YES)
|
|
$(error Sorry, PWM_BACKLIGHT doesnt work on stock board with VOICE mod)
|
|
endif
|
|
ifeq ($(AUDIO), YES)
|
|
$(error Sorry, PWM_BACKLIGHT doesnt work on stock board with AUDIO mod)
|
|
endif
|
|
CPPDEFS += -DPWM_BACKLIGHT
|
|
endif
|
|
|
|
ifeq ($(HAPTIC), YES)
|
|
CPPDEFS += -DHAPTIC
|
|
CPPSRC += haptic.cpp
|
|
endif
|
|
|
|
ifeq ($(SP22), YES)
|
|
CPPDEFS += -DSP22
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PCB), GRUVIN9X)
|
|
# 9x radio with a gruvin9x replacement board
|
|
GUIDIRECTORY = 9x
|
|
FLAVOUR = gruvin9x
|
|
ARCH = AVR
|
|
LCDSIZE = 128
|
|
ifeq ($(PCBREV), REV0)
|
|
CPPDEFS = -DREV0
|
|
else
|
|
CPPDEFS = -DREV1
|
|
endif
|
|
TRGT = avr-
|
|
MCU = atmega2560
|
|
OPT = s
|
|
CPPDEFS += -DF_CPU=$(F_CPU)UL -DPCBGRUVIN9X -DCPUM2560 -DEEPROM -DEEPROM_RLC -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC
|
|
SDCARD = NO
|
|
BUZZER = NO
|
|
THR_TRACE = YES
|
|
INCDIRS += targets/gruvin9x targets/9x $(FATFSDIR) $(FATFSDIR)/option
|
|
BOARDSRC = main_avr.cpp targets/gruvin9x/board_gruvin9x.cpp
|
|
EXTRABOARDSRC = targets/common_avr/adc_driver.cpp targets/9x/lcd_driver.cpp targets/common_avr/telemetry_driver.cpp
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_rlc.cpp
|
|
PULSESSRC = pulses/pulses_avr.cpp
|
|
CPPSRC += audio_avr.cpp haptic.cpp debug.cpp
|
|
BITMAPS += bitmaps/9x/splash.lbm bitmaps/9x/asterisk.lbm bitmaps/9x/about.lbm
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_diagkeys.cpp gui/$(GUIDIRECTORY)/menu_general_diaganas.cpp
|
|
|
|
ifeq ($(SDCARD), YES)
|
|
CPPDEFS += -DRTCLOCK -DSDCARD
|
|
CPPSRC += rtc.cpp sdcard.cpp logs.cpp targets/gruvin9x/rtc_driver.cpp
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_sdmanager.cpp
|
|
EXTRABOARDSRC += $(FATFSDIR)/ff.c $(FATFSDIR)/fattime.c $(FATFSDIR)/option/ccsbcs.c targets/gruvin9x/diskio.cpp
|
|
endif
|
|
|
|
ifeq ($(BUZZER), YES)
|
|
CPPDEFS += -DBUZZER
|
|
CPPSRC += buzzer.cpp
|
|
endif
|
|
|
|
ifeq ($(VOICE), YES)
|
|
CPPDEFS += -DVOICE
|
|
CPPSRC += targets/gruvin9x/somo14d.cpp
|
|
endif
|
|
|
|
# Enable extra rotary encoders (Gruvin9x board only)
|
|
# Values = YES, NO
|
|
ROTARY_ENCODERS = 2
|
|
CPPDEFS += -DROTARY_ENCODERS=${ROTARY_ENCODERS}
|
|
endif
|
|
|
|
ifeq ($(PCB), MEGA2560)
|
|
# ARDUINO2560 DIY RADIO
|
|
GUIDIRECTORY = 9x
|
|
FLAVOUR = mega2560
|
|
ARCH = AVR
|
|
LCDSIZE = 128
|
|
TRGT = avr-
|
|
MCU = atmega2560
|
|
OPT = s
|
|
CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBMEGA2560 -DCPUM2560 -DEEPROM -DEEPROM_RLC -DEEPROM_VARIANT=0 -DAUDIO
|
|
SDCARD = NO
|
|
BUZZER = YES
|
|
THR_TRACE = YES
|
|
PWRMANAGE = NO
|
|
INCDIRS += targets/mega2560 targets/9x $(FATFSDIR) $(FATFSDIR)/option
|
|
BOARDSRC = main_avr.cpp targets/mega2560/board_mega2560.cpp
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_rlc.cpp
|
|
PULSESSRC = pulses/pulses_avr.cpp
|
|
CPPSRC += audio_avr.cpp debug.cpp
|
|
BITMAPS += bitmaps/9x/splash.lbm bitmaps/9x/asterisk.lbm bitmaps/9x/about.lbm
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_diagkeys.cpp gui/$(GUIDIRECTORY)/menu_general_diaganas.cpp
|
|
|
|
EXTRABOARDSRC = targets/common_avr/adc_driver.cpp targets/9x/lcd_driver.cpp targets/common_avr/telemetry_driver.cpp
|
|
|
|
ifeq ($(PWRMANAGE), YES)
|
|
CPPDEFS += -DPWRMANAGE
|
|
endif
|
|
|
|
ifeq ($(SDCARD), YES)
|
|
EXTRABOARDSRC += $(FATFSDIR)/ff.c $(FATFSDIR)/fattime.c $(FATFSDIR)/option/ccsbcs.c targets/gruvin9x/diskio.cpp
|
|
CPPDEFS += -DSDCARD -DRTCLOCK
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_sdmanager.cpp
|
|
CPPSRC += rtc.cpp sdcard.cpp logs.cpp targets/gruvin9x/rtc_driver.cpp
|
|
endif
|
|
|
|
ifeq ($(AUDIO), YES)
|
|
CPPDEFS += -DAUDIO
|
|
CPPSRC += audio_avr.cpp
|
|
BUZZER = NO
|
|
else
|
|
BUZZER = YES
|
|
endif
|
|
|
|
ifeq ($(BUZZER), YES)
|
|
CPPDEFS += -DBUZZER
|
|
CPPSRC += buzzer.cpp
|
|
endif
|
|
|
|
ifeq ($(VOICE), YES)
|
|
CPPDEFS += -DVOICE
|
|
CPPSRC += targets/gruvin9x/somo14d.cpp
|
|
endif
|
|
|
|
ifeq ($(HAPTIC), YES)
|
|
CPPDEFS += -DHAPTIC
|
|
CPPSRC += haptic.cpp
|
|
endif
|
|
|
|
# Enable extra rotary encoders
|
|
ROTARY_ENCODERS = 2
|
|
CPPDEFS += -DROTARY_ENCODERS=${ROTARY_ENCODERS}
|
|
endif
|
|
|
|
ifeq ($(PCB), $(filter $(PCB), SKY9X 9XRPRO AR9X))
|
|
# 9x/9XR radio with a sky9x replacement board
|
|
GUIDIRECTORY = 9x
|
|
ARCH = ARM
|
|
LCDSIZE = 128
|
|
CPPDEFS = -Dat91sam3s4 -DPPM_PIN_HW_SERIAL
|
|
ifeq ($(PCB), 9XRPRO)
|
|
CPPDEFS = -Dat91sam3s8
|
|
FLAVOUR = 9xrpro
|
|
CPPDEFS += -DREVX
|
|
LDSCRIPT = targets/sky9x/sam3s8c_flash.ld
|
|
else ifeq ($(PCB), AR9X)
|
|
CPPDEFS = -Dat91sam3s8
|
|
FLAVOUR = ar9x
|
|
CPPDEFS += -DAR9X
|
|
LDSCRIPT = targets/sky9x/sam3s8c_flash.ld
|
|
else ifeq ($(PCBREV), REVA)
|
|
FLAVOUR = sky9x
|
|
CPPDEFS += -DREVA
|
|
LDSCRIPT = targets/sky9x/sam3s2c_flash.ld
|
|
CPPSRC += targets/sky9x/coproc_driver.cpp
|
|
else ifeq ($(PCBREV), REVB)
|
|
FLAVOUR = sky9x
|
|
CPPDEFS += -DREVB -DCOPROCESSOR
|
|
LDSCRIPT = targets/sky9x/sam3s4c_flash.ld
|
|
CPPSRC += targets/sky9x/coproc_driver.cpp
|
|
else
|
|
FLAVOUR = sky9x
|
|
CPPDEFS += -DREVC -DCOPROCESSOR
|
|
LDSCRIPT = targets/sky9x/sam3s4c_flash.ld
|
|
CPPSRC += targets/sky9x/coproc_driver.cpp
|
|
endif
|
|
TRGT = arm-none-eabi-
|
|
MCU = cortex-m3
|
|
OPT = s
|
|
SDCARD = YES
|
|
BUZZER = NO
|
|
THR_TRACE = YES
|
|
EXT = FRSKY_SPORT
|
|
CPPDEFS += -DPCBSKY9X -DCPUARM -DEEPROM -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC -DDSM2 -DDSM2_PPM -DPXX
|
|
ifeq ($(PCB), SKY9X)
|
|
CPPDEFS += -DROTARY_ENCODERS=1
|
|
CPPSRC += targets/sky9x/rotenc_driver.cpp
|
|
endif
|
|
ifeq ($(SPORT_FILE_LOG), YES)
|
|
CPPDEFS += -DSPORT_FILE_LOG
|
|
endif
|
|
INCDIRS += targets/sky9x $(COOSDIR) $(COOSDIR)/kernel $(COOSDIR)/portable
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_hardware.cpp gui/$(GUIDIRECTORY)/menu_general_diagkeys.cpp gui/$(GUIDIRECTORY)/menu_general_diaganas.cpp
|
|
BOARDSRC = main_arm.cpp targets/sky9x/board_sky9x.cpp
|
|
EXTRABOARDSRC = targets/sky9x/lcd_driver.cpp
|
|
SRC += targets/sky9x/core_cm3.c targets/sky9x/board_lowlevel.c targets/sky9x/crt.c targets/sky9x/vectors_sam3s.c
|
|
SRC += $(COOSDIR)/kernel/core.c $(COOSDIR)/kernel/hook.c $(COOSDIR)/kernel/task.c $(COOSDIR)/kernel/event.c $(COOSDIR)/kernel/time.c $(COOSDIR)/kernel/timer.c $(COOSDIR)/kernel/flag.c $(COOSDIR)/kernel/mutex.c $(COOSDIR)/kernel/serviceReq.c $(COOSDIR)/portable/GCC/port.c $(COOSDIR)/portable/arch.c
|
|
SRC += targets/sky9x/usb/device/core/USBD_UDP.c targets/sky9x/usb/device/core/USBDDriver.c
|
|
SRC += targets/sky9x/usb/device/massstorage/MSDDriver.c targets/sky9x/usb/device/massstorage/MSDDStateMachine.c targets/sky9x/usb/device/massstorage/MSDLun.c targets/sky9x/usb/device/massstorage/MSDDriverDescriptors.c targets/sky9x/usb/device/massstorage/SBCMethods.c
|
|
SRC += targets/sky9x/usb/common/core/USBEndpointDescriptor.c targets/sky9x/usb/common/core/USBGenericRequest.c targets/sky9x/usb/common/core/USBFeatureRequest.c targets/sky9x/usb/common/core/USBInterfaceRequest.c targets/sky9x/usb/common/core/USBGetDescriptorRequest.c targets/sky9x/usb/common/core/USBSetAddressRequest.c targets/sky9x/usb/common/core/USBSetConfigurationRequest.c targets/sky9x/usb/common/core/USBConfigurationDescriptor.c targets/sky9x/usb/common/core/USBGenericDescriptor.c
|
|
SRC += targets/sky9x/MEDSdcard.c
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_raw.cpp storage/eeprom_conversions.cpp
|
|
PULSESSRC = pulses/pulses_arm.cpp pulses/ppm_arm.cpp pulses/pxx_arm.cpp pulses/dsm2_arm.cpp
|
|
CPPSRC += tasks_arm.cpp audio_arm.cpp haptic.cpp gui/$(GUIDIRECTORY)/view_about.cpp gui/$(GUIDIRECTORY)/view_text.cpp telemetry/telemetry.cpp
|
|
CPPSRC += targets/sky9x/telemetry_driver.cpp targets/sky9x/serial2_driver.cpp targets/sky9x/pwr_driver.cpp targets/sky9x/adc_driver.cpp targets/sky9x/eeprom_driver.cpp targets/sky9x/pulses_driver.cpp targets/sky9x/keys_driver.cpp targets/sky9x/audio_driver.cpp targets/sky9x/buzzer_driver.cpp targets/sky9x/haptic_driver.cpp targets/sky9x/sdcard_driver.cpp targets/sky9x/massstorage.cpp
|
|
CPPSRC += loadboot.cpp debug.cpp
|
|
BITMAPS += bitmaps/9x/splash.lbm bitmaps/9x/asterisk.lbm bitmaps/9x/about.lbm
|
|
ifeq ($(SDCARD), YES)
|
|
CPPDEFS += -DSDCARD -DVOICE
|
|
INCDIRS += $(FATFSDIR) $(FATFSDIR)/option
|
|
CPPSRC += sdcard.cpp logs.cpp
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_sdmanager.cpp
|
|
EXTRABOARDSRC += $(FATFSDIR)/ff.c $(FATFSDIR)/fattime.c $(FATFSDIR)/option/ccsbcs.c targets/sky9x/diskio.cpp
|
|
endif
|
|
ifeq ($(BUZZER), YES)
|
|
CPPDEFS += -DBUZZER
|
|
CPPSRC += buzzer.cpp
|
|
endif
|
|
ifeq ($(RTCLOCK), YES)
|
|
CPPDEFS += -DRTCLOCK
|
|
CPPSRC += rtc.cpp targets/sky9x/rtc_driver.cpp
|
|
else ifeq ($(PCB), SKY9X)
|
|
CPPSRC += targets/sky9x/rtc_driver.cpp
|
|
endif
|
|
ifeq ($(BLUETOOTH), YES)
|
|
CPPDEFS += -DBLUETOOTH
|
|
CPPSRC += targets/sky9x/bluetooth.cpp
|
|
endif
|
|
ifeq ($(DEBUG), YES)
|
|
SRC += syscalls.c
|
|
endif
|
|
ifeq ($(HARDWARE_VOLUME), NO)
|
|
CPPDEFS += -DNO_HARDWARE_VOLUME
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PCB), TARANIS)
|
|
# TARANIS radio
|
|
ARCH = ARM
|
|
LCDSIZE = 212
|
|
GUIDIRECTORY = taranis
|
|
ifeq ($(PCBREV), REV9E)
|
|
MCU = cortex-m4
|
|
FLAVOUR = taranis-x9e
|
|
CPPDEFS = -DREVPLUS -DREV9E
|
|
ifeq ($(LCD_DUAL_BUFFER), YES)
|
|
CPPDEFS += -DLCD_DUAL_BUFFER
|
|
endif
|
|
HAPTIC = YES
|
|
EXTRABOARDSRC += targets/taranis/bluetooth_driver.cpp
|
|
else ifeq ($(PCBREV), REVPLUS)
|
|
MCU = cortex-m3
|
|
FLAVOUR = taranis-plus
|
|
CPPDEFS = -DREVPLUS
|
|
ifeq ($(LCD_DUAL_BUFFER), YES)
|
|
CPPDEFS += -DLCD_DUAL_BUFFER
|
|
endif
|
|
HAPTIC = YES
|
|
else ifeq ($(PCBREV), REV4a)
|
|
MCU = cortex-m3
|
|
FLAVOUR = taranis
|
|
CPPDEFS = -DREV4a
|
|
else
|
|
MCU = cortex-m3
|
|
FLAVOUR = taranis
|
|
CPPDEFS = -DREV4
|
|
endif
|
|
ifeq ($(SPORT_FILE_LOG), YES)
|
|
CPPDEFS += -DSPORT_FILE_LOG
|
|
endif
|
|
ifeq ($(TRACE_SD_CARD), YES)
|
|
DEBUG = YES
|
|
DEBUG_TRACE_BUFFER = YES
|
|
CPPDEFS += -DTRACE_SD_CARD
|
|
endif
|
|
ifeq ($(TRACE_FATFS), YES)
|
|
DEBUG = YES
|
|
DEBUG_TRACE_BUFFER = YES
|
|
CPPDEFS += -DTRACE_FATFS
|
|
endif
|
|
ifeq ($(TRACE_AUDIO), YES)
|
|
DEBUG = YES
|
|
DEBUG_TRACE_BUFFER = YES
|
|
CPPDEFS += -DTRACE_AUDIO
|
|
endif
|
|
ifeq ($(DEBUG_TRACE_BUFFER), YES)
|
|
CPPDEFS += -DDEBUG_TRACE_BUFFER
|
|
endif
|
|
ifeq ($(TARANIS_INTERNAL_PPM), YES)
|
|
CPPDEFS += -DTARANIS_INTERNAL_PPM
|
|
endif
|
|
ifeq ($(SUPPORT_D16_EU_ONLY), YES)
|
|
CPPDEFS += -DMODULE_D16_EU_ONLY_SUPPORT
|
|
endif
|
|
TRGT = arm-none-eabi-
|
|
OPT = s
|
|
BITMAPS += $(patsubst %.png,%.lbm,$(wildcard bitmaps/taranis/*.png))
|
|
SDCARD = YES
|
|
THR_TRACE = YES
|
|
EXT = FRSKY_SPORT
|
|
AUTOSWITCH = YES
|
|
AUTOSOURCE = YES
|
|
DBLKEYS = YES
|
|
TIMERS = 2
|
|
CPPDEFS += -DTIMERS=$(TIMERS)
|
|
PPM_LIMITS_SYMETRICAL = YES
|
|
PPM_CENTER_ADJUSTABLE = YES
|
|
DSM2 = PPM
|
|
CPPDEFS += -DPCBTARANIS -DCPUARM -DCPUSTM32 -DVIRTUALINPUTS -DLUAINPUTS -DXCURVES -DEEPROM -DEEPROM_RLC -DAUDIO -DPXX -DSBUS -DCROSSFIRE
|
|
INCDIRS += targets/taranis $(THIRDPARTY) $(COOSDIR) $(COOSDIR)/kernel $(COOSDIR)/portable
|
|
CPPDEFS += -DHSE_VALUE=12000000
|
|
ifeq ($(PCBREV), REV9E)
|
|
STM32LIBPATH = $(THIRDPARTY)/STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries
|
|
CPPDEFS += -DSTM32F4 -DSTM32F40_41xxx -DEEPROM_VARIANT=32768
|
|
INCDIRS += $(STM32LIBPATH)/CMSIS/Device/ST/STM32F4xx/Include $(STM32LIBPATH)/CMSIS/Include $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/inc
|
|
LDSCRIPT = targets/taranis/stm32f4_flash.ld
|
|
else
|
|
STM32LIBPATH= $(THIRDPARTY)/STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries
|
|
CPPDEFS += -DEEPROM_VARIANT=0
|
|
INCDIRS += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/inc $(STM32LIBPATH)/CMSIS/Device/ST/STM32F2xx/Include $(STM32LIBPATH)/CMSIS/include
|
|
LDSCRIPT = targets/taranis/stm32f2_flash.ld
|
|
endif
|
|
STM32USBPATH = $(THIRDPARTY)/STM32_USB-Host-Device_Lib_V2.1.0/Libraries
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_OTG_Driver/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Core/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/hid/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/cdc/inc
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_hardware.cpp
|
|
BOARDSRC = main_arm.cpp targets/taranis/board_taranis.cpp
|
|
EXTRABOARDSRC += targets/taranis/configure_pins.cpp targets/taranis/lcd_driver.cpp targets/taranis/flash_driver.cpp targets/taranis/i2c_driver.cpp targets/taranis/aspi.c targets/taranis/delays.c serial.cpp
|
|
SRC += $(COOSDIR)/kernel/core.c $(COOSDIR)/kernel/hook.c $(COOSDIR)/kernel/task.c $(COOSDIR)/kernel/event.c $(COOSDIR)/kernel/time.c $(COOSDIR)/kernel/timer.c $(COOSDIR)/kernel/flag.c $(COOSDIR)/kernel/mutex.c $(COOSDIR)/kernel/serviceReq.c $(COOSDIR)/portable/GCC/port.c $(COOSDIR)/portable/arch.c
|
|
SRC += targets/taranis/pwr_driver.c targets/taranis/usb_driver.c
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_rlc.cpp storage/eeprom_conversions.cpp
|
|
PULSESSRC = pulses/pulses_arm.cpp pulses/ppm_arm.cpp pulses/pxx_arm.cpp pulses/crossfire.cpp
|
|
CPPSRC += tasks_arm.cpp audio_arm.cpp sbus.cpp telemetry/telemetry.cpp
|
|
CPPSRC += targets/taranis/pulses_driver.cpp targets/taranis/keys_driver.cpp targets/taranis/adc_driver.cpp targets/taranis/trainer_driver.cpp targets/taranis/audio_driver.cpp targets/taranis/serial2_driver.cpp targets/taranis/telemetry_driver.cpp
|
|
CPPSRC += bmp.cpp gui/$(GUIDIRECTORY)/view_channels.cpp gui/$(GUIDIRECTORY)/view_about.cpp gui/$(GUIDIRECTORY)/view_text.cpp debug.cpp
|
|
CPPSRC += loadboot.cpp
|
|
ifeq ($(PCBREV), REV9E)
|
|
CPPSRC += targets/taranis/top_lcd_driver.cpp
|
|
SRC += targets/taranis/system_stm32f4xx.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/misc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_gpio.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dbgmcu.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_rcc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_spi.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_i2c.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dma.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_rtc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_pwr.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_usart.c
|
|
SRC += $(STM32LIBPATH)/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc_ride7/startup_stm32f40_41xxx.s
|
|
else
|
|
SRC += targets/taranis/system_stm32f2xx.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/misc.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_gpio.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_dbgmcu.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_rcc.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_spi.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_i2c.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_dma.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_rtc.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_pwr.c
|
|
SRC += $(STM32LIBPATH)/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_usart.c
|
|
SRC += $(STM32LIBPATH)/CMSIS/Device/ST/STM32F2xx/Source/Templates/gcc_ride7/startup_stm32f2xx.s
|
|
endif
|
|
SRC += targets/taranis/usb_bsp.c targets/taranis/usbd_desc.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_core.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_dcd.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_dcd_int.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_core.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_ioreq.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_req.c
|
|
EXTRABOARDSRC += targets/taranis/usbd_usr.cpp
|
|
SRC += syscalls.c
|
|
ifeq ($(USB), JOYSTICK)
|
|
CPPDEFS += -DUSB_JOYSTICK
|
|
SRC += targets/taranis/usbd_hid_joystick.c
|
|
else ifeq ($(USB), SERIAL)
|
|
CPPDEFS += -DUSB_SERIAL
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/cdc/src/usbd_cdc_core.c
|
|
EXTRABOARDSRC += targets/taranis/usbd_cdc.cpp
|
|
else
|
|
CPPDEFS += -DUSB_MASS_STORAGE
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_data.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_scsi.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_bot.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_core.c
|
|
EXTRABOARDSRC += targets/taranis/usbd_storage_msd.cpp
|
|
endif
|
|
ifeq ($(NANO), YES)
|
|
# use newlib-nano for linking
|
|
NEWLIB_NANO_FLAGS = --specs=nano.specs -u _printf_float
|
|
CPPDEFS += -DNANO
|
|
endif
|
|
ifeq ($(GVARS), YES)
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_gvars.cpp
|
|
endif
|
|
ifneq ($(LUA), NO)
|
|
ifeq ($(LUA), YES)
|
|
CPPDEFS += -DLUA_MODEL_SCRIPTS
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_custom_scripts.cpp
|
|
endif
|
|
CPPDEFS += -DLUA
|
|
INCDIRS += $(LUADIR)
|
|
CPPSRC += lua/interface.cpp lua/api_general.cpp lua/api_lcd.cpp lua/api_model.cpp
|
|
LUASRC = $(LUADIR)/lapi.c $(LUADIR)/lcode.c $(LUADIR)/lctype.c $(LUADIR)/ldebug.c $(LUADIR)/ldo.c $(LUADIR)/ldump.c $(LUADIR)/lfunc.c $(LUADIR)/lgc.c $(LUADIR)/llex.c $(LUADIR)/lmem.c \
|
|
$(LUADIR)/lobject.c $(LUADIR)/lopcodes.c $(LUADIR)/lparser.c $(LUADIR)/lstate.c $(LUADIR)/lstring.c $(LUADIR)/ltable.c $(LUADIR)/lrotable.c $(LUADIR)/ltm.c $(LUADIR)/lundump.c $(LUADIR)/lvm.c $(LUADIR)/lzio.c \
|
|
$(LUADIR)/lbaselib.c $(LUADIR)/linit.c $(LUADIR)/lmathlib.c $(LUADIR)/lbitlib.c $(LUADIR)/loadlib.c $(LUADIR)/lauxlib.c $(LUADIR)/ltablib.c $(LUADIR)/lcorolib.c $(LUADIR)/liolib.c $(LUADIR)/lstrlib.c
|
|
SRC += $(LUASRC)
|
|
ifeq ($(PCBREV), REV9E)
|
|
LUADEP = lua/lua_exports_taranis_x9e.inc
|
|
else
|
|
LUADEP = lua/lua_exports_taranis.inc
|
|
endif
|
|
ifeq ($(USE_BIN_ALLOCATOR), YES)
|
|
CPPDEFS += -DUSE_BIN_ALLOCATOR
|
|
CPPSRC += bin_allocator.cpp
|
|
endif
|
|
endif
|
|
EXTRABOARDSRC += $(FATFSDIR)/ff.c $(FATFSDIR)/fattime.c $(FATFSDIR)/option/ccsbcs.c targets/taranis/diskio.cpp
|
|
CPPSRC += sdcard.cpp logs.cpp rtc.cpp targets/taranis/rtc_driver.cpp
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_sdmanager.cpp gui/$(GUIDIRECTORY)/menu_general_diagkeys.cpp gui/$(GUIDIRECTORY)/menu_general_diaganas.cpp
|
|
CPPDEFS += -DSDCARD -DVOICE -DRTCLOCK
|
|
INCDIRS += $(FATFSDIR) $(FATFSDIR)/option
|
|
ifeq ($(DSM2), PPM)
|
|
CPPSRC += pulses/dsm2_arm.cpp
|
|
endif
|
|
ifeq ($(HUBSAN), YES)
|
|
CPPDEFS += -DHUBSAN
|
|
CPPSRC += pulses/hubsan.cpp
|
|
CPPSRC += targets/taranis/a7105_driver.cpp
|
|
endif
|
|
ifeq ($(HAPTIC), YES)
|
|
CPPDEFS += -DHAPTIC
|
|
CPPSRC += haptic.cpp
|
|
CPPSRC += targets/taranis/haptic_driver.cpp
|
|
endif
|
|
ifeq ($(MIXERS_MONITOR), YES)
|
|
CPPDEFS += -DMIXERS_MONITOR
|
|
endif
|
|
ifeq ($(WATCHDOG_TEST), YES)
|
|
CPPDEFS += -DWATCHDOG_TEST
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PCB), FLAMENCO)
|
|
# FLAMENCO radio
|
|
ARCH = ARM
|
|
LCDSIZE = 320
|
|
GUIDIRECTORY = flamenco
|
|
FLAVOUR = FLAMENCO
|
|
LDSCRIPT = targets/flamenco/stm32f4_flash.ld
|
|
STM32LIBPATH = $(THIRDPARTY)/STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries
|
|
STM32USBPATH = $(THIRDPARTY)/STM32_USB-Host-Device_Lib_V2.1.0/Libraries
|
|
TRGT = arm-none-eabi-
|
|
MCU = cortex-m4
|
|
OPT = 2
|
|
CPPDEFS += -DHSE_VALUE=12000000 -DCOLORLCD -DSTM32F40_41xxx -DPPM_PIN_HW_SERIAL
|
|
BITMAPS += $(patsubst %.png,%.lbm,$(wildcard bitmaps/flamenco/*.png))
|
|
FONTS = fonts/flamenco/font_stdsize.lbm fonts/flamenco/font_tinsize.lbm fonts/flamenco/font_smlsize.lbm fonts/flamenco/font_midsize.lbm fonts/flamenco/font_dblsize.lbm fonts/flamenco/font_xxlsize.lbm
|
|
SDCARD = YES
|
|
THR_TRACE = YES
|
|
EXT = FRSKY_SPORT
|
|
AUTOSWITCH = YES
|
|
AUTOSOURCE = YES
|
|
DBLKEYS = YES
|
|
PPM_LIMITS_SYMETRICAL = YES
|
|
PPM_CENTER_ADJUSTABLE = YES
|
|
DSM2 = PPM
|
|
TIMERS = 2
|
|
CPPDEFS += -DTIMERS=$(TIMERS)
|
|
CPPDEFS += -DPCBFLAMENCO -DCPUARM -DCPUSTM32 -DEEPROM -DVIRTUALINPUTS -DLUAINPUTS -DXCURVES -DEEPROM_VARIANT=0 -DAUDIO -DPXX
|
|
INCDIRS += targets/flamenco $(THIRDPARTY) $(COOSDIR) $(COOSDIR)/kernel $(COOSDIR)/portable
|
|
INCDIRS += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/inc $(STM32LIBPATH)/CMSIS/Device/ST/STM32F4xx/Include $(STM32LIBPATH)/CMSIS/include
|
|
STM32USBPATH = $(THIRDPARTY)/STM32_USB-Host-Device_Lib_V2.1.0/Libraries
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_OTG_Driver/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Core/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/hid/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/cdc/inc
|
|
BOARDSRC = main_arm.cpp targets/flamenco/board_flamenco.cpp
|
|
EXTRABOARDSRC += targets/flamenco/lcd_driver.cpp targets/flamenco/delays.c targets/flamenco/i2c_driver.cpp targets/taranis/configure_pins.cpp serial.cpp # targets/taranis/flash_driver.cpp
|
|
SRC += $(COOSDIR)/kernel/core.c $(COOSDIR)/kernel/hook.c $(COOSDIR)/kernel/task.c $(COOSDIR)/kernel/event.c $(COOSDIR)/kernel/time.c $(COOSDIR)/kernel/timer.c $(COOSDIR)/kernel/flag.c $(COOSDIR)/kernel/mutex.c $(COOSDIR)/kernel/serviceReq.c $(COOSDIR)/portable/GCC/port.c $(COOSDIR)/portable/arch.c
|
|
SRC += targets/flamenco/pwr_driver.c targets/flamenco/usb_driver.c
|
|
EEPROMSRC = storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_raw.cpp
|
|
PULSESSRC = pulses/pulses_arm.cpp pulses/ppm_arm.cpp pulses/pxx_arm.cpp
|
|
CPPSRC += tasks_arm.cpp audio_arm.cpp sbus.cpp telemetry/telemetry.cpp
|
|
CPPSRC += targets/flamenco/tw8823_driver.cpp targets/flamenco/pulses_driver.cpp targets/flamenco/keys_driver.cpp targets/flamenco/adc_driver.cpp targets/flamenco/eeprom_driver.cpp targets/flamenco/trainer_driver.cpp targets/flamenco/audio_driver.cpp targets/flamenco/serial2_driver.cpp targets/flamenco/telemetry_driver.cpp
|
|
CPPSRC += gui/$(GUIDIRECTORY)/view_channels.cpp gui/$(GUIDIRECTORY)/view_about.cpp gui/$(GUIDIRECTORY)/view_text.cpp debug.cpp
|
|
SRC += targets/flamenco/system_stm32f4xx.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/misc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_gpio.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dbgmcu.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_rcc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_spi.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_i2c.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dma.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_rtc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_pwr.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_usart.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_sdio.c
|
|
SRC += $(STM32LIBPATH)/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc_ride7/startup_stm32f40_41xxx.s
|
|
SRC += targets/flamenco/sdio_sd.c targets/flamenco/usb_bsp.c targets/flamenco/usbd_desc.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_core.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_dcd.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_dcd_int.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_core.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_ioreq.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_req.c
|
|
EXTRABOARDSRC += targets/flamenco/usbd_usr.cpp
|
|
SRC += syscalls.c
|
|
ifeq ($(USB), JOYSTICK)
|
|
CPPDEFS += -DUSB_JOYSTICK
|
|
SRC += targets/flamenco/usbd_hid_joystick.c
|
|
else
|
|
CPPDEFS += -DUSB_MASS_STORAGE
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_data.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_scsi.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_bot.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_core.c
|
|
EXTRABOARDSRC += targets/flamenco/usbd_storage_msd.cpp
|
|
endif
|
|
ifeq ($(GVARS), YES)
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_gvars.cpp
|
|
endif
|
|
ifneq ($(LUA), NO)
|
|
ifeq ($(LUA), YES)
|
|
CPPDEFS += -DLUA_MODEL_SCRIPTS
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_custom_scripts.cpp
|
|
endif
|
|
CPPDEFS += -DLUA
|
|
INCDIRS += $(LUADIR)
|
|
CPPSRC += lua/interface.cpp lua/api_general.cpp lua/api_lcd.cpp lua/api_model.cpp
|
|
LUASRC = $(LUADIR)/lapi.c $(LUADIR)/lcode.c $(LUADIR)/lctype.c $(LUADIR)/ldebug.c $(LUADIR)/ldo.c $(LUADIR)/ldump.c $(LUADIR)/lfunc.c $(LUADIR)/lgc.c $(LUADIR)/llex.c $(LUADIR)/lmem.c \
|
|
$(LUADIR)/lobject.c $(LUADIR)/lopcodes.c $(LUADIR)/lparser.c $(LUADIR)/lstate.c $(LUADIR)/lstring.c $(LUADIR)/ltable.c $(LUADIR)/lrotable.c $(LUADIR)/ltm.c $(LUADIR)/lundump.c $(LUADIR)/lvm.c $(LUADIR)/lzio.c \
|
|
$(LUADIR)/lbaselib.c $(LUADIR)/linit.c $(LUADIR)/lmathlib.c $(LUADIR)/lbitlib.c $(LUADIR)/loadlib.c $(LUADIR)/lauxlib.c $(LUADIR)/ltablib.c $(LUADIR)/lcorolib.c $(LUADIR)/liolib.c $(LUADIR)/lstrlib.c
|
|
SRC += $(LUASRC)
|
|
LUADEP = lua/lua_exports_flamenco.inc
|
|
endif
|
|
|
|
EXTRABOARDSRC += $(FATFSDIR)/ff.c $(FATFSDIR)/fattime.c $(FATFSDIR)/option/ccsbcs.c targets/flamenco/diskio.cpp
|
|
CPPDEFS += -DSDCARD -DVOICE -DRTCLOCK
|
|
CPPSRC += sdcard.cpp rtc.cpp logs.cpp targets/taranis/rtc_driver.cpp
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_sdmanager.cpp
|
|
INCDIRS += $(FATFSDIR) $(FATFSDIR)/option
|
|
|
|
ifeq ($(DSM2), PPM)
|
|
CPPSRC += pulses/dsm2_arm.cpp
|
|
endif
|
|
|
|
CPPDEFS += -DHAPTIC
|
|
CPPSRC += haptic.cpp
|
|
CPPSRC += targets/flamenco/haptic_driver.cpp
|
|
EXTRABOARDSRC +=
|
|
|
|
ifeq ($(TW8823_TRACES), YES)
|
|
CPPDEFS += -DTW8823_TRACES
|
|
endif
|
|
|
|
ifeq ($(TW8823_BITMAPS), YES)
|
|
CPPDEFS += -DTW8823_BITMAPS
|
|
endif
|
|
|
|
ifeq ($(TW8823_SERIAL), YES)
|
|
CPPDEFS += -DTW8823_SERIAL
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PCB), HORUS)
|
|
# HORUS radio
|
|
ARCH = ARM
|
|
LCDSIZE = 480
|
|
GUIDIRECTORY = horus
|
|
FLAVOUR = HORUS
|
|
LDSCRIPT = targets/horus/stm32f4_flash.ld
|
|
STM32LIBPATH = $(THIRDPARTY)/STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries
|
|
STM32USBPATH = $(THIRDPARTY)/STM32_USB-Host-Device_Lib_V2.1.0/Libraries
|
|
TRGT = arm-none-eabi-
|
|
MCU = cortex-m4
|
|
OPT = 2
|
|
CPPDEFS += -DHSE_VALUE=12000000 -DCOLORLCD -DSTM32F429_439xx
|
|
BITMAPS += $(patsubst %.png,%.lbm,$(wildcard bitmaps/horus/*.png))
|
|
FONTS = fonts/horus/font_stdsize.lbm fonts/horus/font_tinsize.lbm fonts/horus/font_smlsize.lbm fonts/horus/font_midsize.lbm fonts/horus/font_dblsize.lbm fonts/horus/font_xxlsize.lbm
|
|
SDCARD = YES
|
|
THR_TRACE = YES
|
|
EXT = FRSKY_SPORT
|
|
AUTOSWITCH = YES
|
|
AUTOSOURCE = YES
|
|
DBLKEYS = YES
|
|
PPM_LIMITS_SYMETRICAL = YES
|
|
PPM_CENTER_ADJUSTABLE = YES
|
|
DSM2 = PPM
|
|
TIMERS = 2
|
|
CPPDEFS += -DTIMERS=$(TIMERS)
|
|
CPPDEFS += -DPCBHORUS -DCPUARM -DCPUSTM32 -DVIRTUALINPUTS -DLUAINPUTS -DXCURVES -DEEPROM_VARIANT=0 -DAUDIO -DPXX
|
|
INCDIRS += targets/horus $(THIRDPARTY) $(COOSDIR) $(COOSDIR)/kernel $(COOSDIR)/portable
|
|
INCDIRS += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/inc $(STM32LIBPATH)/CMSIS/Device/ST/STM32F4xx/Include $(STM32LIBPATH)/CMSIS/include
|
|
STM32USBPATH = $(THIRDPARTY)/STM32_USB-Host-Device_Lib_V2.1.0/Libraries
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_OTG_Driver/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Core/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/hid/inc
|
|
INCDIRS += $(STM32USBPATH)/STM32_USB_Device_Library/Class/cdc/inc
|
|
BOARDSRC = main_arm.cpp targets/horus/board_horus.cpp targets/horus/led_driver.cpp
|
|
EXTRABOARDSRC += targets/horus/lcd_driver.cpp targets/horus/delays.c targets/horus/i2c_driver.cpp targets/taranis/configure_pins.cpp serial.cpp # targets/taranis/flash_driver.cpp
|
|
SRC += $(COOSDIR)/kernel/core.c $(COOSDIR)/kernel/hook.c $(COOSDIR)/kernel/task.c $(COOSDIR)/kernel/event.c $(COOSDIR)/kernel/time.c $(COOSDIR)/kernel/timer.c $(COOSDIR)/kernel/flag.c $(COOSDIR)/kernel/mutex.c $(COOSDIR)/kernel/serviceReq.c $(COOSDIR)/portable/GCC/port.c $(COOSDIR)/portable/arch.c
|
|
SRC += targets/horus/pwr_driver.c targets/horus/usb_driver.c targets/horus/sdram_driver.c
|
|
PULSESSRC = pulses/pulses_arm.cpp pulses/ppm_arm.cpp pulses/pxx_arm.cpp
|
|
CPPSRC += tasks_arm.cpp audio_arm.cpp sbus.cpp telemetry/telemetry.cpp
|
|
CPPSRC += targets/horus/pulses_driver.cpp targets/horus/keys_driver.cpp targets/horus/adc_driver.cpp targets/horus/trainer_driver.cpp targets/horus/audio_driver.cpp targets/horus/serial2_driver.cpp targets/horus/telemetry_driver.cpp
|
|
CPPSRC += bmp.cpp gui/$(GUIDIRECTORY)/curves.cpp gui/$(GUIDIRECTORY)/bitmaps.cpp gui/$(GUIDIRECTORY)/view_channels.cpp gui/$(GUIDIRECTORY)/view_about.cpp gui/$(GUIDIRECTORY)/view_text.cpp debug.cpp
|
|
SRC += targets/horus/system_stm32f4xx.c
|
|
CPPSRC += storage/storage_common.cpp storage/sdcard_raw.cpp
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/misc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_gpio.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dbgmcu.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_rcc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_spi.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_i2c.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dma.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_rtc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_pwr.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_usart.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_sdio.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_fmc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_ltdc.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_tim.c
|
|
SRC += $(STM32LIBPATH)/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dma2d.c
|
|
SRC += $(STM32LIBPATH)/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc_ride7/startup_stm32f40_41xxx.s
|
|
SRC += targets/horus/sdio_sd.c targets/horus/usb_bsp.c targets/horus/usbd_desc.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_core.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_dcd.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_OTG_Driver/src/usb_dcd_int.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_core.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_ioreq.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Core/src/usbd_req.c
|
|
EXTRABOARDSRC += targets/horus/usbd_usr.cpp
|
|
SRC += syscalls.c
|
|
ifeq ($(USB), JOYSTICK)
|
|
CPPDEFS += -DUSB_JOYSTICK
|
|
SRC += targets/horus/usbd_hid_joystick.c
|
|
else ifeq ($(USB), SERIAL)
|
|
CPPDEFS += -DUSB_SERIAL
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/cdc/src/usbd_cdc_core.c
|
|
EXTRABOARDSRC += targets/horus/usbd_cdc.cpp
|
|
else
|
|
CPPDEFS += -DUSB_MASS_STORAGE
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_data.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_scsi.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_bot.c
|
|
SRC += $(STM32USBPATH)/STM32_USB_Device_Library/Class/msc/src/usbd_msc_core.c
|
|
EXTRABOARDSRC += targets/horus/usbd_storage_msd.cpp
|
|
endif
|
|
ifeq ($(GVARS), YES)
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_gvars.cpp
|
|
endif
|
|
ifneq ($(LUA), NO)
|
|
ifeq ($(LUA), YES)
|
|
CPPDEFS += -DLUA_MODEL_SCRIPTS
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_custom_scripts.cpp
|
|
endif
|
|
CPPDEFS += -DLUA
|
|
INCDIRS += $(LUADIR)
|
|
CPPSRC += lua/interface.cpp lua/api_general.cpp lua/api_lcd.cpp lua/api_model.cpp
|
|
LUASRC = $(LUADIR)/lapi.c $(LUADIR)/lcode.c $(LUADIR)/lctype.c $(LUADIR)/ldebug.c $(LUADIR)/ldo.c $(LUADIR)/ldump.c $(LUADIR)/lfunc.c $(LUADIR)/lgc.c $(LUADIR)/llex.c $(LUADIR)/lmem.c \
|
|
$(LUADIR)/lobject.c $(LUADIR)/lopcodes.c $(LUADIR)/lparser.c $(LUADIR)/lstate.c $(LUADIR)/lstring.c $(LUADIR)/ltable.c $(LUADIR)/lrotable.c $(LUADIR)/ltm.c $(LUADIR)/lundump.c $(LUADIR)/lvm.c $(LUADIR)/lzio.c \
|
|
$(LUADIR)/lbaselib.c $(LUADIR)/linit.c $(LUADIR)/lmathlib.c $(LUADIR)/lbitlib.c $(LUADIR)/loadlib.c $(LUADIR)/lauxlib.c $(LUADIR)/ltablib.c $(LUADIR)/lcorolib.c $(LUADIR)/liolib.c $(LUADIR)/lstrlib.c
|
|
SRC += $(LUASRC)
|
|
LUADEP = lua/lua_exports_horus.inc
|
|
endif
|
|
|
|
EXTRABOARDSRC += $(FATFSDIR)/ff.c $(FATFSDIR)/fattime.c $(FATFSDIR)/option/ccsbcs.c targets/horus/diskio.cpp
|
|
CPPDEFS += -DSDCARD -DVOICE -DRTCLOCK
|
|
CPPSRC += sdcard.cpp rtc.cpp logs.cpp targets/taranis/rtc_driver.cpp
|
|
GUIGENERALSRC += gui/$(GUIDIRECTORY)/menu_general_sdmanager.cpp
|
|
INCDIRS += $(FATFSDIR) $(FATFSDIR)/option
|
|
|
|
ifeq ($(DSM2), PPM)
|
|
CPPSRC += pulses/dsm2_arm.cpp
|
|
endif
|
|
|
|
CPPDEFS += -DHAPTIC
|
|
CPPSRC += haptic.cpp
|
|
CPPSRC += targets/horus/haptic_driver.cpp
|
|
EXTRABOARDSRC +=
|
|
endif
|
|
|
|
CC = $(TRGT)gcc
|
|
CPP = $(TRGT)cpp
|
|
AS = $(TRGT)as
|
|
OBJCOPY = $(TRGT)objcopy
|
|
OBJDUMP = $(TRGT)objdump
|
|
SIZE = $(TRGT)size
|
|
NM = $(TRGT)nm
|
|
|
|
REMOVE = rm -f
|
|
REMOVEDIR = rm -rf
|
|
|
|
SLEEP = sleep
|
|
|
|
# Processor frequency.
|
|
F_CPU = 16000000
|
|
|
|
# Output format. (can be srec, ihex, binary)
|
|
FORMAT = ihex
|
|
|
|
# Target file name (without extension).
|
|
TARGET = opentx
|
|
|
|
# List C++ source files here. (C dependencies are automatically generated.)
|
|
ifeq ($(PCB), $(filter $(PCB), SKY9X 9XRPRO AR9X TARANIS FLAMENCO HORUS))
|
|
TTS_SRC = translations/tts_cz.cpp translations/tts_de.cpp translations/tts_en.cpp translations/tts_es.cpp translations/tts_fr.cpp translations/tts_it.cpp translations/tts_nl.cpp translations/tts_pt.cpp translations/tts_sk.cpp translations/tts_se.cpp translations/tts_pl.cpp translations/tts_hu.cpp
|
|
else
|
|
STD_TTS_SRC = translations/tts_$(shell sh -c "echo $(TTS) | tr '[:upper:]' '[:lower:]'").cpp
|
|
TTS_SRC = $(shell sh -c "if test -f $(STD_TTS_SRC); then echo $(STD_TTS_SRC); else echo translations/tts_en.cpp; fi")
|
|
endif
|
|
|
|
ifeq ($(GUI), YES)
|
|
GUISRC = gui/$(GUIDIRECTORY)/helpers.cpp gui/$(GUIDIRECTORY)/navigation.cpp gui/$(GUIDIRECTORY)/popups.cpp gui/$(GUIDIRECTORY)/widgets.cpp gui/$(GUIDIRECTORY)/menus.cpp $(GUIMODELSRC) $(GUIGENERALSRC) gui/$(GUIDIRECTORY)/view_main.cpp gui/$(GUIDIRECTORY)/view_statistics.cpp
|
|
ifeq ($(ARCH), ARM)
|
|
GUISRC += gui/gui_helpers.cpp
|
|
endif
|
|
CPPDEFS += -DGUI
|
|
endif
|
|
|
|
CPPSRC += opentx.cpp functions.cpp strhelpers.cpp $(PULSESSRC) switches.cpp curves.cpp mixer.cpp stamp.cpp $(GUISRC) $(EEPROMSRC) timers.cpp trainer_input.cpp
|
|
|
|
ifeq ($(GUI), YES)
|
|
GUISRC += gui/$(GUIDIRECTORY)/lcd.cpp gui/$(GUIDIRECTORY)/splash.cpp gui/$(GUIDIRECTORY)/fonts.cpp
|
|
endif
|
|
|
|
GUISRC += keys.cpp maths.cpp translations.cpp $(TTS_SRC)
|
|
|
|
# Debugging format.
|
|
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
|
# AVR Studio 4.10 requires dwarf-2.
|
|
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
|
DBGFMT = dwarf-2
|
|
|
|
CPPDEFS += -DTRANSLATIONS_$(TRANSLATIONS)
|
|
|
|
# TTS language
|
|
CPPDEFS += -DTTS_$(TTS)
|
|
|
|
ifeq ($(UNITS), IMPERIAL)
|
|
CPPDEFS += -DIMPERIAL_UNITS
|
|
endif
|
|
|
|
ifneq ($(DEFAULT_MODE), NO)
|
|
CPPDEFS += -DDEFAULT_MODE=$(DEFAULT_MODE)
|
|
endif
|
|
|
|
# If POTS are used for fields modification
|
|
ifeq ($(NAVIGATION), POT1)
|
|
CPPDEFS += -DNAVIGATION_POT1
|
|
endif
|
|
ifeq ($(NAVIGATION), POT2)
|
|
CPPDEFS += -DNAVIGATION_POT2
|
|
endif
|
|
ifeq ($(NAVIGATION), POT3)
|
|
CPPDEFS += -DNAVIGATION_POT3
|
|
endif
|
|
ifeq ($(NAVIGATION), POTS)
|
|
CPPDEFS += -DNAVIGATION_POT1 -DNAVIGATION_POT2 -DNAVIGATION_POT3
|
|
endif
|
|
ifeq ($(NAVIGATION), STICKS)
|
|
CPPDEFS += -DNAVIGATION_STICKS
|
|
endif
|
|
ifeq ($(NAVIGATION), ROTENC)
|
|
CPPDEFS += -DROTARY_ENCODER_NAVIGATION
|
|
endif
|
|
|
|
ifeq ($(TURNIGY_TRANSMITTER_FIX), YES)
|
|
ifeq ($(PCB), $(filter $(PCB), TARANIS FLAMENCO HORUS))
|
|
$(warning TURNIGY_TRANSMITTER_FIX is not available on this radio)
|
|
else
|
|
CPPDEFS += -DMODULE_ALWAYS_SEND_PULSES
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(LCD), ST7565R)
|
|
CPPDEFS += -DLCD_ST7565R
|
|
else ifeq ($(LCD), ERC12864FSF)
|
|
CPPDEFS += -DLCD_ERC12864FSF
|
|
else ifeq ($(LCD), ST7920)
|
|
CPPDEFS += -DLCD_ST7920
|
|
endif
|
|
|
|
ifeq ($(AUTOSWITCH), YES)
|
|
CPPDEFS += -DAUTOSWITCH
|
|
endif
|
|
|
|
ifeq ($(AUTOSOURCE), YES)
|
|
CPPDEFS += -DAUTOSOURCE
|
|
endif
|
|
|
|
ifeq ($(FRSKY_STICKS), YES)
|
|
CPPDEFS += -DFRSKY_STICKS
|
|
endif
|
|
|
|
ifeq ($(DBLKEYS), YES)
|
|
ifeq ($(PCB), $(filter $(PCB), 9XR 9XR128 9XR2561))
|
|
$(warning Sorry, DBLKEYS doesnt work on 9XR)
|
|
else
|
|
CPPDEFS += -DDBLKEYS
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(SPLASH), YES)
|
|
CPPDEFS += -DSPLASH
|
|
endif
|
|
|
|
ifeq ($(SPLASH), FIXED)
|
|
CPPDEFS += -DSPLASH -DFSPLASH
|
|
endif
|
|
|
|
ifeq ($(GRAPHICS), YES)
|
|
CPPDEFS += -DGRAPHICS
|
|
endif
|
|
|
|
ifeq ($(BOLD), YES)
|
|
CPPDEFS += -DBOLD_FONT
|
|
endif
|
|
|
|
ifneq ($(PCB), $(filter $(PCB), TARANIS FLAMENCO HORUS))
|
|
ifeq ($(BATTGRAPH), YES)
|
|
CPPDEFS += -DBATTGRAPH
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(FONT), STD)
|
|
FONTDIR = $(shell sh -c "echo $(FONT) | tr '[:upper:]' '[:lower:]'")
|
|
FONTS += $(patsubst %.png,%.lbm,$(wildcard fonts/$(FONTDIR)/*.png))
|
|
INCDIRS += fonts/$(FONTDIR)
|
|
endif
|
|
|
|
INCDIRS += gui
|
|
INCDIRS += fonts/std
|
|
|
|
ifeq ($(THR_TRACE), YES)
|
|
CPPDEFS += -DTHRTRACE
|
|
endif
|
|
|
|
CPPDEFS += -DTIMERS=$(TIMERS)
|
|
|
|
ifeq ($(FLIGHT_MODES), YES)
|
|
CPPDEFS += -DFLIGHT_MODES
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_flightmodes.cpp
|
|
endif
|
|
|
|
ifeq ($(CURVES), YES)
|
|
CPPDEFS += -DCURVES
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_curves.cpp
|
|
endif
|
|
|
|
ifeq ($(GVARS), YES)
|
|
CPPDEFS += -DGVARS
|
|
EEPROM_VARIANT += ${GVARS_VARIANT}
|
|
endif
|
|
|
|
ifeq ($(MENUS_LOCK), READONLY)
|
|
CPPDEFS += -DMENUS_LOCK=1
|
|
endif
|
|
|
|
ifeq ($(MENUS_LOCK), NOMENUS)
|
|
CPPDEFS += -DMENUS_LOCK=2
|
|
endif
|
|
|
|
ifeq ($(CORRECT_NEGATIVE_VALUES), YES)
|
|
CPPDEFS += -DCORRECT_NEGATIVE_SHIFTS
|
|
endif
|
|
|
|
ifeq ($(ARITHMETIC_OVERFLOW_CHECK), YES)
|
|
CPPDEFS += -DPREVENT_ARITHMETIC_OVERFLOW
|
|
endif
|
|
|
|
ifeq ($(ACCURAT_THROTTLE_STATS), YES)
|
|
CPPDEFS += -DACCURAT_THROTTLE_TIMER
|
|
endif
|
|
|
|
# EXTENSIONS (for Telemetry protocols)
|
|
ifneq ($(EXT), $(filter $(EXT), STD FRSKY FRSKY_SPORT ARDUPILOT NMEA JETI MAVLINK TELEMETREZ))
|
|
$(error Sorry, the EXT $(EXT) is not supported yet in openTx)
|
|
endif
|
|
|
|
ifeq ($(EXT), STD)
|
|
CPPDEFS += -DEXTSTD
|
|
endif
|
|
|
|
ifeq ($(EXT), ARDUPILOT)
|
|
CPPDEFS += -DARDUPILOT
|
|
CPPSRC += telemetry/ardupilot.cpp
|
|
endif
|
|
|
|
ifeq ($(EXT), NMEA)
|
|
CPPDEFS += -DNMEA
|
|
CPPSRC += telemetry/nmea.cpp
|
|
endif
|
|
|
|
ifeq ($(EXT), JETI)
|
|
CPPDEFS += -DJETI
|
|
CPPSRC += telemetry/jeti.cpp
|
|
endif
|
|
|
|
ifeq ($(EXT), MAVLINK)
|
|
CPPDEFS += -DMAVLINK
|
|
INCDIRS += thirdparty targets/common_avr/
|
|
CPPSRC += telemetry/mavlink.cpp gui/$(GUIDIRECTORY)/view_mavlink.cpp targets/common_avr/serial_driver.cpp
|
|
EEPROM_VARIANT += ${MAVLINK_VARIANT}
|
|
endif
|
|
|
|
ifeq ($(EXT), TELEMETREZ)
|
|
CPPDEFS += -DTELEMETREZ
|
|
endif
|
|
|
|
ifeq ($(EXT), $(filter $(EXT), FRSKY FRSKY_SPORT TELEMETREZ))
|
|
CPPDEFS += -DFRSKY
|
|
|
|
ifeq ($(ARCH), ARM)
|
|
CPPSRC += telemetry/frsky.cpp telemetry/frsky_d_arm.cpp
|
|
else
|
|
CPPSRC += telemetry/frsky.cpp telemetry/frsky_d.cpp
|
|
endif
|
|
|
|
ifeq ($(EXT), FRSKY_SPORT)
|
|
CPPSRC += telemetry/frsky_sport.cpp
|
|
CPPSRC += crc16.cpp
|
|
CPPDEFS += -DFRSKY_SPORT
|
|
endif
|
|
|
|
CPPSRC += gui/$(GUIDIRECTORY)/view_telemetry.cpp
|
|
|
|
ifeq ($(FRSKY_HUB), YES)
|
|
CPPDEFS += -DFRSKY_HUB
|
|
endif
|
|
|
|
ifeq ($(WS_HOW_HIGH), YES)
|
|
CPPDEFS += -DWS_HOW_HIGH
|
|
endif
|
|
|
|
ifeq ($(GAUGES), YES)
|
|
CPPDEFS += -DGAUGES
|
|
endif
|
|
|
|
ifeq ($(GPS), YES)
|
|
CPPDEFS += -DGPS
|
|
endif
|
|
|
|
ifeq ($(VARIO), YES)
|
|
CPPSRC += vario.cpp
|
|
CPPDEFS += -DVARIO
|
|
endif
|
|
EEPROM_VARIANT += ${FRSKY_VARIANT}
|
|
endif
|
|
|
|
ifeq ($(SIMU), YES)
|
|
CPPDEFS += -DDEBUG
|
|
CPPSRC += dump.cpp
|
|
else ifeq ($(CLI), YES)
|
|
CPPDEFS += -DCLI
|
|
CPPSRC += cli.cpp dump.cpp
|
|
else ifeq ($(DEBUG), YES)
|
|
CPPSRC += dump.cpp
|
|
endif
|
|
|
|
ifeq ($(DEBUG), YES)
|
|
CPPDEFS += -DDEBUG
|
|
endif
|
|
|
|
ifeq ($(EEPROM_PROGRESS_BAR), YES)
|
|
CPPDEFS += -DEEPROM_PROGRESS_BAR
|
|
endif
|
|
|
|
ifeq ($(SHUTDOWN_CONFIRMATION), YES)
|
|
CPPDEFS += -DSHUTDOWN_CONFIRMATION
|
|
endif
|
|
|
|
RUN_FROM_FLASH = 1
|
|
|
|
### Global Build-Option Directives ###
|
|
|
|
ifeq ($(PPM_CENTER_ADJUSTABLE), YES)
|
|
CPPDEFS += -DPPM_CENTER_ADJUSTABLE
|
|
endif
|
|
|
|
ifeq ($(PPM_LIMITS_SYMETRICAL), YES)
|
|
CPPDEFS += -DPPM_LIMITS_SYMETRICAL
|
|
endif
|
|
|
|
ifeq ($(OVERRIDE_CHANNEL_FUNCTION), YES)
|
|
CPPDEFS += -DOVERRIDE_CHANNEL_FUNCTION
|
|
endif
|
|
|
|
ifeq ($(DANGEROUS_MODULE_FUNCTIONS), YES)
|
|
CPPDEFS += -DDANGEROUS_MODULE_FUNCTIONS
|
|
endif
|
|
|
|
ifeq ($(PPM_UNIT), US)
|
|
CPPDEFS += -DPPM_UNIT_US
|
|
endif
|
|
|
|
ifeq ($(PPM_UNIT), PERCENT_PREC1)
|
|
CPPDEFS += -DPPM_UNIT_PERCENT_PREC1
|
|
endif
|
|
|
|
ifeq ($(PPM_UNIT), PERCENT_PREC0)
|
|
CPPDEFS += -DPPM_UNIT_PERCENT_PREC0
|
|
endif
|
|
|
|
ifeq ($(FAI), YES)
|
|
CPPDEFS += -DFAI
|
|
endif
|
|
ifeq ($(FAI), CHOICE)
|
|
CPPDEFS += -DFAI_CHOICE
|
|
endif
|
|
|
|
ifeq ($(HELI), YES)
|
|
CPPDEFS += -DHELI
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_heli.cpp
|
|
endif
|
|
|
|
ifeq ($(TEMPLATES), YES)
|
|
ifneq ($(PCB), $(filter $(PCB), TARANIS FLAMENCO HORUS))
|
|
CPPDEFS += -DTEMPLATES
|
|
CPPSRC += templates.cpp
|
|
GUIMODELSRC += gui/$(GUIDIRECTORY)/menu_model_templates.cpp
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PXX), YES)
|
|
CPPDEFS += -DPXX
|
|
endif
|
|
|
|
ifeq ($(DSM2), SERIAL)
|
|
CPPDEFS += -DDSM2 -DDSM2_SERIAL
|
|
endif
|
|
|
|
ifeq ($(DSM2), PPM)
|
|
CPPDEFS += -DDSM2 -DDSM2_PPM
|
|
endif
|
|
|
|
ifeq ($(TX_CADDY), YES)
|
|
CPPDEFS += -DTX_CADDY
|
|
endif
|
|
|
|
ifeq ($(IRPROTOS), YES)
|
|
CPPDEFS += -DIRPROTOS
|
|
endif
|
|
|
|
ifeq ($(LUA_COMPILER), YES)
|
|
CPPDEFS += -DLUA_COMPILER
|
|
endif
|
|
|
|
#---------------- Compiler Options C++ ----------------
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CPPFLAGS = -g$(DBGFMT)
|
|
CPPFLAGS += $(CPPDEFS)
|
|
CPPFLAGS += -Wall
|
|
CPPFLAGS += -fno-exceptions
|
|
CPPFLAGS += -Wno-strict-aliasing
|
|
CPPFLAGS += -Wformat -Wreturn-type -Wunused -Wuninitialized -Wunknown-pragmas -Wno-switch -Wtype-limits
|
|
INCFLAGS = $(patsubst %,-I%,$(INCDIRS))
|
|
|
|
ifeq ($(WARNINGS_AS_ERRORS), YES)
|
|
CPPFLAGS += -Werror
|
|
endif
|
|
|
|
MATH_LIB = -lm
|
|
|
|
#---------------- Linker Options ----------------
|
|
# -Wl,...: tell GCC to pass this to linker.
|
|
# -Map: create map file
|
|
# --cref: add cross reference to map file
|
|
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
|
LDFLAGS += $(MATH_LIB)
|
|
|
|
# Define Messages
|
|
# English
|
|
MSG_BEGIN = -------- begin --------
|
|
MSG_END = -------- end --------
|
|
MSG_SIZE_BEFORE = Size before:
|
|
MSG_SIZE_AFTER = Size after:
|
|
MSG_FLASH = Creating load file for Flash:
|
|
MSG_EEPROM = Creating load file for EEPROM:
|
|
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
|
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
|
MSG_COMPILING = Compiling C++:
|
|
MSG_CLEANING = Cleaning project:
|
|
|
|
# Combine all necessary flags and optional flags.
|
|
# Add target processor to flags.
|
|
|
|
CPPFLAGS += -DFLAVOUR=\"$(FLAVOUR)\"
|
|
ARMCPPFLAGS = -c -mcpu=$(MCU) -mthumb -fomit-frame-pointer -fverbose-asm -Wa,-ahlms=opentx.lst -DRUN_FROM_FLASH=1 -O$(OPT) $(CPPFLAGS) -fdata-sections -ffunction-sections $(INCFLAGS) $(GENDEPFLAGS)
|
|
AVRCPPFLAGS = -mmcu=$(MCU) -I. -x c++ -O$(OPT) $(CPPFLAGS) $(INCFLAGS) $(GENDEPFLAGS) -fwhole-program
|
|
|
|
ifeq ($(ARCH), AVR)
|
|
GCCVERSIONGTE462 := $(shell expr 4.6.2 \<= `$(CC) -dumpversion`)
|
|
ifeq ($(GCCVERSIONGTE462),1)
|
|
CPPFLAGS += -flto
|
|
endif
|
|
|
|
AVRCPPFLAGS += -fno-inline-small-functions
|
|
|
|
GCCVERSIONGTE470 := $(shell expr 4.7.0 \<= `$(CC) -dumpversion`)
|
|
ifeq ($(GCCVERSIONGTE470),1)
|
|
AVRCPPFLAGS += -mstrict-X
|
|
endif
|
|
endif
|
|
|
|
MAJ_VER = ${shell sh -c "grep \"MAJ_VERS\" opentx.h | cut -d\ -f3 | egrep -o \"[[:digit:]]\""}
|
|
MIN_VER = ${shell sh -c "grep \"MIN_VERS\" opentx.h | cut -d\ -f3"}
|
|
|
|
.SECONDARY:
|
|
|
|
# Default target.
|
|
all: begin gccversion sizebefore build sizeafter end
|
|
|
|
# Change the build target to build a HEX file or a library.
|
|
ifeq ($(ARCH), AVR)
|
|
build: stamp.h tra lbm allsrc.cpp elf remallsrc hex
|
|
else ifeq ($(PCB), $(filter $(PCB), SKY9X 9XRPRO AR9X TARANIS))
|
|
build: stamp.h tra lbm bootloader.lbm $(LUADEP) allsrc.cpp elf remallsrc bin
|
|
else
|
|
build: stamp.h tra lbm $(LUADEP) allsrc.cpp elf remallsrc bin
|
|
endif
|
|
|
|
# build bootloader
|
|
ifeq ($(PCB), $(filter $(PCB), TARANIS))
|
|
bootloader.lbm: targets/taranis/bootloader/bootloader_ramBoot.bin
|
|
$(BIN2LBM) $^ $@
|
|
.PHONY targets/taranis/bootloader/bootloader_ramBoot.bin:
|
|
@echo "Building bootloader..."
|
|
$(MAKE) -C targets/taranis/bootloader PCB=$(PCB) PCBREV=$(PCBREV) NANO=$(NANO) WARNINGS_AS_ERRORS=$(WARNINGS_AS_ERRORS)
|
|
else ifeq ($(PCB), $(filter $(PCB), 9XRPRO AR9X))
|
|
bootloader.lbm:
|
|
@echo "Fetching Mike's bootloader..."
|
|
wget http://ersky9x.googlecode.com/svn/trunk/src/bootloader/bootflash8.lbm
|
|
mv bootflash8.lbm $@
|
|
else ifeq ($(PCB), SKY9X)
|
|
bootloader.lbm:
|
|
@echo "Fetching Mike's bootloader..."
|
|
wget http://ersky9x.googlecode.com/svn/trunk/src/bootloader/bootflash4.lbm
|
|
mv bootflash4.lbm $@
|
|
endif
|
|
|
|
tra: translations/en.h translations/cz.h translations/de.h translations/es.h translations/fi.h translations/fr.h translations/it.h translations/nl.h translations/pl.h translations/pt.h translations/se.h
|
|
lbm: fonts bitmaps
|
|
|
|
elf: $(TARGET).elf
|
|
bin: $(TARGET).bin
|
|
hex: $(TARGET).hex
|
|
eep: $(TARGET).eep
|
|
lss: $(TARGET).lss
|
|
sym: $(TARGET).sym
|
|
|
|
# Build stamp-file
|
|
.PHONY : stamp.h
|
|
.PHONY : opentx-stamp
|
|
|
|
stamp.h:
|
|
@echo "// Automatically generated file (Makefile) - do not edit" > stamp.h
|
|
@echo "#define DATE \"`date +%Y-%m-%d | tr -d '\r\n'`\"" > stamp.h
|
|
@echo "#define TIME \"`date +%H:%M:%S | tr -d '\r\n'`\"" >> stamp.h
|
|
@echo "#define VERSION \"$(VERSION)\"" >> stamp.h
|
|
@echo "" >> stamp.h
|
|
@echo "#define VERSION_MAJOR $(VERSION_MAJOR)" >> stamp.h
|
|
@echo "#define VERSION_MINOR $(VERSION_MINOR)" >> stamp.h
|
|
@echo "#define VERSION_REVISION $(VERSION_REVISION)" >> stamp.h
|
|
@echo "#define GIT_STR \"$(shell git rev-parse HEAD)\"" >> stamp.h
|
|
|
|
opentx-stamp:
|
|
@echo "#define DATE_STR \"`date +%Y-%m-%d`\"" > stamp-opentx.txt
|
|
@echo "#define TIME_STR \"`date +%H:%M:%S`\"" >> stamp-opentx.txt
|
|
@echo "#define VERS_STR \"$(VERSION)\"" >> stamp-opentx.txt
|
|
@echo "#define GIT_STR \"$(shell git rev-parse HEAD)\"" >> stamp-opentx.txt
|
|
@cat stamp-opentx.txt
|
|
|
|
|
|
translations/en.h: translations/en.h.txt
|
|
@echo
|
|
@echo "Create English language specific header files"
|
|
$(TRANSLATE) translations/en.h.txt translations/en.h en
|
|
|
|
translations/cz.h: translations/cz.h.txt
|
|
@echo
|
|
@echo "Create Czech language specific header files"
|
|
$(TRANSLATE) translations/cz.h.txt translations/cz.h cz
|
|
|
|
translations/de.h: translations/de.h.txt
|
|
@echo
|
|
@echo "Create German language specific header files"
|
|
$(TRANSLATE) translations/de.h.txt translations/de.h de
|
|
|
|
translations/es.h: translations/es.h.txt
|
|
@echo
|
|
@echo "Create Spanish language specific header files"
|
|
$(TRANSLATE) translations/es.h.txt translations/es.h es
|
|
|
|
translations/fi.h: translations/fi.h.txt
|
|
@echo
|
|
@echo "Create Finnish language specific header files"
|
|
$(TRANSLATE) translations/fi.h.txt translations/fi.h fi
|
|
|
|
translations/fr.h: translations/fr.h.txt
|
|
@echo
|
|
@echo "Create French language specific header files"
|
|
$(TRANSLATE) translations/fr.h.txt translations/fr.h fr
|
|
|
|
translations/it.h: translations/it.h.txt
|
|
@echo
|
|
@echo "Create Italian language specific header files"
|
|
$(TRANSLATE) translations/it.h.txt translations/it.h it
|
|
|
|
translations/nl.h: translations/nl.h.txt
|
|
@echo
|
|
@echo "Create Nederlands language specific header files"
|
|
$(TRANSLATE) translations/nl.h.txt translations/nl.h nl
|
|
|
|
translations/pl.h: translations/pl.h.txt
|
|
@echo
|
|
@echo "Create Polish language specific header files"
|
|
$(TRANSLATE) translations/pl.h.txt translations/pl.h pl
|
|
|
|
translations/pt.h: translations/pt.h.txt
|
|
@echo
|
|
@echo "Create Portugese language specific header files"
|
|
$(TRANSLATE) translations/pt.h.txt translations/pt.h pt
|
|
|
|
translations/se.h: translations/se.h.txt
|
|
@echo
|
|
@echo "Create Swedish language specific header files"
|
|
$(TRANSLATE) translations/se.h.txt translations/se.h se
|
|
|
|
ifeq ($(PCB), $(filter $(PCB), HORUS))
|
|
FONTDIR = horus
|
|
FONTNAME = DejaVu\ Sans
|
|
TINSIZE = 9
|
|
SMLSIZE = 13
|
|
STDSIZE = 16
|
|
MIDSIZE = 24
|
|
DBLSIZE = 32
|
|
DBLBOLD = True
|
|
XXLSIZE = 48
|
|
MASKFORMAT = 8bits
|
|
else
|
|
FONTDIR = flamenco
|
|
FONTNAME = Roboto
|
|
TINSIZE = 5
|
|
SMLSIZE = 7
|
|
STDSIZE = 11
|
|
MIDSIZE = 11
|
|
DBLSIZE = 14
|
|
DBLBOLD = False
|
|
XXLSIZE = 38
|
|
MASKFORMAT = 4bits
|
|
endif
|
|
|
|
.PHONY: fonts
|
|
fonts: $(FONTS)
|
|
|
|
fonts/$(FONTDIR)/font_%size.lbm: fonts/$(FONTDIR)/font_%size.png
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE) $(MASKFORMAT)
|
|
|
|
fonts/$(FONTDIR)/font_tinsize.png:
|
|
$(FONT2PNG) $(FONTNAME) $(TINSIZE) False fonts/$(FONTDIR)/font_tinsize
|
|
|
|
fonts/$(FONTDIR)/font_smlsize.png:
|
|
$(FONT2PNG) $(FONTNAME) $(SMLSIZE) False fonts/$(FONTDIR)/font_smlsize
|
|
|
|
fonts/$(FONTDIR)/font_stdsize.png:
|
|
$(FONT2PNG) $(FONTNAME) $(STDSIZE) False fonts/$(FONTDIR)/font_stdsize
|
|
|
|
fonts/$(FONTDIR)/font_midsize.png:
|
|
$(FONT2PNG) $(FONTNAME) $(MIDSIZE) False fonts/$(FONTDIR)/font_midsize
|
|
|
|
fonts/$(FONTDIR)/font_dblsize.png:
|
|
$(FONT2PNG) $(FONTNAME) $(DBLSIZE) $(DBLBOLD) fonts/$(FONTDIR)/font_dblsize
|
|
|
|
fonts/$(FONTDIR)/font_xxlsize.png:
|
|
$(FONT2PNG) $(FONTNAME) $(XXLSIZE) False fonts/$(FONTDIR)/font_xxlsize
|
|
|
|
fonts/%.lbm: fonts/%.png
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE)
|
|
|
|
.PHONY: bitmaps
|
|
bitmaps: $(BITMAPS)
|
|
|
|
bitmaps/sticks.lbm: bitmaps/sticks.xbm
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE) 1bit 4
|
|
|
|
bitmaps/9x/%.lbm: bitmaps/9x/%.png
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE) 1bit
|
|
|
|
bitmaps/taranis/%.lbm: bitmaps/taranis/%.png
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE) 4bits
|
|
|
|
bitmaps/flamenco/%.lbm: bitmaps/flamenco/%.png
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE) 4/4/4/4
|
|
|
|
bitmaps/horus/mask_%.lbm: bitmaps/horus/mask_%.png
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE) $(MASKFORMAT)
|
|
|
|
bitmaps/horus/%.lbm: bitmaps/horus/%.png
|
|
$(IMG2LBM) $^ $@ $(LCDSIZE) 5/6/5/8
|
|
|
|
ifeq ($(OS),Windows_NT)
|
|
PARSER = avr-cpp
|
|
else
|
|
PARSER = gcc -E -x c++
|
|
endif
|
|
|
|
lua/lua_exports_taranis.inc: myeeprom.h ../util/luaexport.py
|
|
@echo "Generating a list of Lua exported constants in lua/lua_exports_taranis.txt"
|
|
@$(PARSER) -DEXPORT -DPCBTARANIS -DLUA -DVIRTUALINPUTS myeeprom.h | grep LEXP > lua/lua_exports_taranis.txt
|
|
@echo "Parsing and generating C Lua exports in lua/lua_exports_taranis.inc"
|
|
@python ../util/luaexport.py $(VERSION) lua/lua_exports_taranis.txt lua/lua_exports_taranis.inc lua/lua_fields_taranis.txt
|
|
@rm lua/lua_exports_taranis.txt
|
|
|
|
lua/lua_exports_taranis_x9e.inc: myeeprom.h ../util/luaexport.py
|
|
@echo "Generating a list of Lua exported constants in lua/lua_exports_taranis_x9e.txt"
|
|
@$(PARSER) -DEXPORT -DPCBTARANIS -DREVPLUS -DREV9E -DLUA -DVIRTUALINPUTS myeeprom.h | grep LEXP > lua/lua_exports_taranis_x9e.txt
|
|
@echo "Parsing and generating C Lua exports in lua/lua_exports_taranis_x9e.inc"
|
|
@python ../util/luaexport.py $(VERSION) lua/lua_exports_taranis_x9e.txt lua/lua_exports_taranis_x9e.inc lua/lua_fields_taranis_x9e.txt
|
|
@rm lua/lua_exports_taranis_x9e.txt
|
|
|
|
lua/lua_exports_horus.inc: myeeprom.h ../util/luaexport.py
|
|
@echo "Generating a list of Lua exported constants in lua/lua_exports_horus.txt"
|
|
@$(PARSER) -DEXPORT -DPCBHORUS -DLUA -DVIRTUALINPUTS myeeprom.h | grep LEXP > lua/lua_exports_horus.txt
|
|
@echo "Parsing and generating C Lua exports in lua/lua_exports_horus.inc"
|
|
@python ../util/luaexport.py $(VERSION) lua/lua_exports_horus.txt lua/lua_exports_horus.inc lua/lua_fields_horus.txt
|
|
@rm lua/lua_exports_horus.txt
|
|
|
|
lua/lua_exports_flamenco.inc: myeeprom.h ../util/luaexport.py
|
|
@echo "Generating a list of Lua exported constants in lua/lua_exports_flamenco.txt"
|
|
@$(PARSER) -DEXPORT -DPCBFLAMENCO -DLUA -DVIRTUALINPUTS myeeprom.h | grep LEXP > lua/lua_exports_flamenco.txt
|
|
@echo "Parsing and generating C Lua exports in lua/lua_exports_flamenco.inc"
|
|
@python ../util/luaexport.py $(VERSION) lua/lua_exports_flamenco.txt lua/lua_exports_flamenco.inc lua/lua_fields_flamenco.txt
|
|
@rm lua/lua_exports_flamenco.txt
|
|
|
|
# Eye candy.
|
|
# AVR Studio 3.x does not check make's exit code but relies on
|
|
# the following magic strings to be generated by the compile job.
|
|
|
|
begin:
|
|
@echo
|
|
@echo $(MSG_BEGIN)
|
|
|
|
end:
|
|
@echo $(MSG_END)
|
|
@echo
|
|
|
|
# Display size of file.
|
|
ifeq ($(ARCH), AVR)
|
|
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
|
|
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
|
|
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
|
|
else
|
|
ELFSIZE = $(SIZE) $(TARGET).elf
|
|
endif
|
|
|
|
sizebefore:
|
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); fi
|
|
|
|
sizeafter:
|
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); fi
|
|
|
|
# Display compiler version information.
|
|
gccversion:
|
|
@$(CC) --version
|
|
|
|
FOXINC=-I/usr/local/include/fox-1.6 -I/usr/include/fox-1.6 \
|
|
-I$(FOXPATH)/include \
|
|
-I/opt/local/include/fox-1.6
|
|
FOXLIB=-L/usr/local/lib \
|
|
-L$(FOXPATH)/src/.libs \
|
|
-L/opt/local/lib \
|
|
-lFOX-1.6 \
|
|
-Wl,-rpath,$(FOXPATH)/src/.libs
|
|
|
|
SIMUDEFS = -DSIMU -DLUA_USE_APICHECK
|
|
ifeq ($(SIMU_AUDIO), YES)
|
|
AUDIOLIB = -L/usr/lib/x86_64-linux-gnu/ -lSDLmain -lSDL
|
|
AUDIOINC = -I/usr/include/SDL
|
|
SIMUDEFS += -DSIMU_AUDIO
|
|
endif
|
|
|
|
ifeq ($(SIMU_DISKIO), YES)
|
|
CPPSRC += $(FATFSDIR)/ff.c $(FATFSDIR)/option/ccsbcs.c
|
|
SIMUDEFS += -DSIMU_DISKIO
|
|
endif
|
|
|
|
simu: $(LUADEP) stamp.h allsimusrc.cpp Makefile simu.cpp targets/simu/simpgmspace.cpp *.h tra lbm eeprom.bin
|
|
g++ $(CPPFLAGS) $(SIMUCPPFLAGS) $(INCFLAGS) simu.cpp allsimusrc.cpp $(LUASRC) targets/simu/simpgmspace.cpp -MD $(SIMUDEFS) -O0 -o simu $(FOXINC) $(FOXLIB) $(AUDIOINC) $(AUDIOLIB) -pthread -fexceptions
|
|
|
|
eeprom.bin:
|
|
dd if=/dev/zero of=$@ bs=1 count=2048
|
|
|
|
|
|
# Create final output files (.hex, .eep) from ELF output file.
|
|
ifeq ($(ARCH), AVR)
|
|
%.hex: %.elf
|
|
@echo
|
|
@echo $(MSG_FLASH) $@
|
|
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
|
else
|
|
%.hex: %.elf
|
|
@echo
|
|
@echo $(MSG_FLASH) $@
|
|
$(OBJCOPY) -O ihex opentx.elf opentx.hex
|
|
endif
|
|
|
|
%.bin: %.elf
|
|
@echo
|
|
@echo $(MSG_FLASH) $@
|
|
$(OBJCOPY) -O binary $< $@
|
|
|
|
%.eep: %.elf
|
|
@echo
|
|
@echo $(MSG_EEPROM) $@
|
|
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
|
|
|
# Create a symbol table from ELF output file.
|
|
%.sym: %.elf
|
|
@echo
|
|
@echo $(MSG_SYMBOL_TABLE) $@
|
|
$(NM) -n $< > $@
|
|
|
|
# Create extended listing file from ELF output file.
|
|
%.lss: %.elf
|
|
@echo
|
|
@echo $(MSG_EXTENDED_LISTING) $@
|
|
$(OBJDUMP) -h -S $< > $@
|
|
|
|
# Concatenate all sources files in one big file to optimize size
|
|
allsrc.cpp: Makefile $(BOARDSRC) $(CPPSRC) $(EXTRABOARDSRC)
|
|
@rm -f allsrc.cpp
|
|
for f in $(BOARDSRC) $(CPPSRC) $(EXTRABOARDSRC) ; do echo "# 1 \"$$f\"" >> allsrc.cpp; cat "$$f" >> allsrc.cpp; done
|
|
|
|
allsimusrc.cpp: Makefile $(BOARDSRC) $(CPPSRC)
|
|
@rm -f allsimusrc.cpp
|
|
for f in $(BOARDSRC) $(CPPSRC) ; do echo "# 1 \"$$f\"" >> allsimusrc.cpp; cat "$$f" >> allsimusrc.cpp; done
|
|
|
|
remallsrc:
|
|
$(REMOVE) allsrc.cpp
|
|
$(REMOVE) allsimusrc.cpp
|
|
|
|
# Link: create ELF output file from object files.
|
|
ifeq ($(ARCH), AVR)
|
|
opentx.elf: allsrc.cpp
|
|
@echo
|
|
@echo $(MSG_COMPILING) $@
|
|
$(CC) $(AVRCPPFLAGS) $< --output $@ $(LDFLAGS)
|
|
else
|
|
%.o: %.c
|
|
$(CC) $(ARMCPPFLAGS) -Wimplicit $< -o $@
|
|
%.o: %.s
|
|
$(AS) $< -o $@
|
|
TMP = $(SRC:.c=.o)
|
|
OBJS = $(TMP:.s=.o)
|
|
opentx.elf: allsrc.cpp $(OBJS)
|
|
@echo
|
|
@echo $(MSG_COMPILING) $@
|
|
$(CC) $(ARMCPPFLAGS) $< -o allsrc.o
|
|
$(CC) $(OBJS) allsrc.o -mcpu=$(MCU) -mthumb -nostartfiles -lm -T$(LDSCRIPT) -Wl,-Map=$(TARGET).map,--cref,--no-warn-mismatch,--gc-sections $(NEWLIB_NANO_FLAGS) -o $@
|
|
endif
|
|
|
|
# Target: clean project.
|
|
clean: begin clean_list end
|
|
|
|
CLEAN_SRC=$(filter %.c,$(SRC))
|
|
clean_list :
|
|
@echo
|
|
@echo $(MSG_CLEANING)
|
|
$(REMOVE) simu
|
|
$(REMOVE) gtests
|
|
$(REMOVE) gtest.a
|
|
$(REMOVE) gtest_main.a
|
|
$(REMOVE) $(TARGET).bin
|
|
$(REMOVE) $(TARGET).hex
|
|
$(REMOVE) $(TARGET).eep
|
|
$(REMOVE) $(TARGET).elf
|
|
$(REMOVE) $(TARGET).map
|
|
$(REMOVE) $(TARGET).sym
|
|
$(REMOVE) $(TARGET).lss
|
|
$(REMOVE) $(TARGET).lst
|
|
$(REMOVE) $(CLEAN_SRC:.c=.s)
|
|
$(REMOVE) `find . -name "*.o"`
|
|
$(REMOVE) *.d
|
|
$(REMOVE) *.lst
|
|
$(REMOVE) allsrc.cpp
|
|
$(REMOVE) allsimusrc.cpp
|
|
$(REMOVE) stamp.h
|
|
$(REMOVE) *.lbm
|
|
$(REMOVE) bitmaps/*.lbm
|
|
$(REMOVE) bitmaps/*/*.lbm
|
|
$(REMOVE) fonts/*/*.lbm
|
|
$(REMOVE) translations/*.h
|
|
$(REMOVE) lua/lua_exports*.txt lua/lua_fields*.txt lua/lua_exports*.inc
|
|
$(MAKE) -C targets/taranis/bootloader clean
|
|
|
|
#### Install
|
|
|
|
DATE = ${shell sh -c "date +%F:%T" }
|
|
AVRCOMMAND = $(AVRDUDE) $(AVRDEVICE)
|
|
|
|
WRITE_COMMAND = $(AVRCOMMAND) -U flash:w:opentx.hex:i
|
|
ifeq ($(RESTORE_EEPROM), YES)
|
|
BACKUP_EEPROM = YES
|
|
ifeq ($(DOUBLE_WRITE_OK), YES)
|
|
WRITE_COMMAND += -U eeprom:w:$(DATA_DIR)/eeprom-$(DATE).hex:i
|
|
else
|
|
SECOND_WRITE_COMMAND = -U eeprom:w:$(DATA_DIR)/eeprom-$(DATE).hex:i
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(BACKUP_FLASH), YES)
|
|
BACKUP_ARGS += -U eeprom:r:$(DATA_DIR)/eeprom-$(DATE).hex:i $(BACKUPFLASH)
|
|
endif
|
|
ifeq ($(BACKUP_EEPROM), YES)
|
|
BACKUP_ARGS += -U flash:r:$(DATA_DIR)/opentx-$(DATE).hex:i
|
|
endif
|
|
|
|
install: all
|
|
ifdef BACKUP_ARGS
|
|
$(AVRCOMMAND) $(BACKUP_ARGS)
|
|
$(SLEEP) $(DELAY)
|
|
endif
|
|
$(WRITE_COMMAND)
|
|
ifdef SECOND_WRITE_COMMAND
|
|
$(SLEEP) $(DELAY)
|
|
$(SECOND_WRITE_COMMAND)
|
|
endif
|
|
|
|
#### GOOGLE TESTS
|
|
|
|
GTEST_INCDIR = /usr/include/gtest
|
|
GTEST_SRCDIR = /usr/src/gtest/
|
|
|
|
# Where to find user code.
|
|
USER_DIR = ./
|
|
|
|
# All Google Test headers. Usually you shouldn't change this
|
|
# definition.
|
|
GTEST_HEADERS = $(GTEST_INCDIR)/*.h \
|
|
$(GTEST_INCDIR)/internal/*.h
|
|
|
|
# House-keeping build targets.
|
|
|
|
# Builds gtest.a and gtest_main.a.
|
|
|
|
# Usually you shouldn't tweak such internal variables, indicated by a
|
|
# trailing _.
|
|
GTEST_SRCS = $(GTEST_SRCDIR)/src/*.cc $(GTEST_HEADERS)
|
|
|
|
# For simplicity and to avoid depending on Google Test's
|
|
# implementation details, the dependencies specified below are
|
|
# conservative and not optimized. This is fine as Google Test
|
|
# compiles fast and for ordinary users its source rarely changes.
|
|
gtest-all.o : $(GTEST_SRCS)
|
|
$(CXX) $(CPPFLAGS) -I$(GTEST_SRCDIR) -I$(GTEST_INCDIR) -c $(GTEST_SRCDIR)/src/gtest-all.cc
|
|
|
|
# Builds a sample test. A test should link with either gtest.a or
|
|
# gtest_main.a, depending on whether it defines its own main()
|
|
# function.
|
|
|
|
#use all .cpp files from tests/ dir
|
|
GTEST_TESTS_SRCS = $(shell find tests/ -type f -name '*.cpp')
|
|
|
|
gtests: allsimusrc.cpp $(GTEST_TESTS_SRCS) targets/simu/simpgmspace.cpp *.h tests/gtests.h gtest-all.o
|
|
g++ -std=gnu++0x $(CPPFLAGS) $(SIMUCPPFLAGS) allsimusrc.cpp $(LUASRC) $(GTEST_TESTS_SRCS) targets/simu/simpgmspace.cpp ${INCFLAGS} -I$(GTEST_INCDIR) -I/usr/include/qt4 -o gtests -lpthread -MD -DSIMU -lQtCore -lQtGui gtest-all.o -fexceptions
|
|
|