Files
edgetx-gx12/radio/src/targets/sky9x/board.h
T

414 lines
11 KiB
C

/*
* Copyright (C) OpenTX
*
* Based on code named
* th9x - http://code.google.com/p/th9x
* er9x - http://code.google.com/p/er9x
* gruvin9x - http://code.google.com/p/gruvin9x
*
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _BOARD_SKY9X_H_
#define _BOARD_SKY9X_H_
#include <inttypes.h>
#include <stdbool.h>
#include <stdio.h>
#include "board_lowlevel.h"
#include "audio_driver.h"
#include "../opentx_constants.h"
extern uint16_t ResetReason;
#define BOOTLOADER_SIZE 0x8000
#define FIRMWARE_SIZE (256*1024)
#define FIRMWARE_ADDRESS 0x00400000
// Board driver
void boardInit();
void boardOff();
// Rotary Encoder driver
void rotaryEncoderInit();
void rotaryEncoderEnd();
#if !defined(REVX) && !defined(PCBAR9X)
#define ROTARY_ENCODER_NAVIGATION
#define REA_DOWN() (!(PIOB->PIO_PDSR & 0x40))
#else
#define REA_DOWN() (0)
#endif
// Keys driver
#define NUM_SWITCHES 7
#define STORAGE_NUM_SWITCHES NUM_SWITCHES
#define NUM_SWITCHES_POSITIONS 9
enum EnumKeys
{
KEY_MENU,
KEY_ENTER=KEY_MENU,
KEY_EXIT,
KEY_DOWN,
KEY_MINUS = KEY_DOWN,
KEY_UP,
KEY_PLUS = KEY_UP,
KEY_RIGHT,
KEY_LEFT,
KEY_COUNT,
KEY_MAX = KEY_COUNT - 1,
TRM_BASE,
TRM_LH_DWN = TRM_BASE,
TRM_LH_UP,
TRM_LV_DWN,
TRM_LV_UP,
TRM_RV_DWN,
TRM_RV_UP,
TRM_RH_DWN,
TRM_RH_UP,
TRM_LAST = TRM_RH_UP,
NUM_KEYS
};
#define IS_SHIFT_KEY(index) (false)
#define IS_SHIFT_PRESSED() (false)
enum EnumSwitches
{
SW_ID0,
SW_ID1,
SW_ID2,
SW_THR,
SW_RUD,
SW_ELE,
SW_AIL,
SW_GEA,
SW_TRN,
};
#define IS_3POS(sw) ((sw) == 0)
#define IS_TOGGLE(sw) ((sw) == SWSRC_TRN)
#define KEYS_GPIO_REG_MENU PIOB->PIO_PDSR
#define KEYS_GPIO_REG_EXIT PIOC->PIO_PDSR
#define KEYS_GPIO_REG_UP PIOC->PIO_PDSR
#define KEYS_GPIO_REG_DOWN PIOC->PIO_PDSR
#define KEYS_GPIO_REG_RIGHT PIOC->PIO_PDSR
#define KEYS_GPIO_REG_LEFT PIOC->PIO_PDSR
#define KEYS_GPIO_PIN_MENU 0x00000020
#define KEYS_GPIO_PIN_EXIT 0x01000000
#define KEYS_GPIO_PIN_UP 0x00000002
#define KEYS_GPIO_PIN_DOWN 0x00000020
#define KEYS_GPIO_PIN_RIGHT 0x00000010
#define KEYS_GPIO_PIN_LEFT 0x00000008
#if defined(REVX)
#define TRIMS_GPIO_REG_LHL PIOB->PIO_PDSR
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_RVU PIOC->PIO_PDSR
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_LHR PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
#define TRIMS_GPIO_REG_RVD PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
#else
#define TRIMS_GPIO_REG_LHL PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_RVU PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
#define TRIMS_GPIO_REG_LHR PIOB->PIO_PDSR
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
#define TRIMS_GPIO_REG_RVD PIOC->PIO_PDSR
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
#endif
#if defined(REVX)
#define TRIMS_GPIO_PIN_LHL 0x00000010
#define TRIMS_GPIO_PIN_LVD 0x01000000
#define TRIMS_GPIO_PIN_RVU 0x00000400
#define TRIMS_GPIO_PIN_RHL 0x00000001
#define TRIMS_GPIO_PIN_LHR 0x00800000
#define TRIMS_GPIO_PIN_LVU 0x10000000
#define TRIMS_GPIO_PIN_RVD 0x00000002
#define TRIMS_GPIO_PIN_RHR 0x00000200
#else
#define TRIMS_GPIO_PIN_LHL 0x00800000
#define TRIMS_GPIO_PIN_LVD 0x01000000
#define TRIMS_GPIO_PIN_RVU 0x00000002
#define TRIMS_GPIO_PIN_RHL 0x00000001
#define TRIMS_GPIO_PIN_LHR 0x00000010
#define TRIMS_GPIO_PIN_LVU 0x10000000
#define TRIMS_GPIO_PIN_RVD 0x00000400
#define TRIMS_GPIO_PIN_RHR 0x00000200
#endif
// LCD driver
#define LCD_W 128
#define LCD_H 64
#define LCD_DEPTH 1
#define LCD_CONTRAST_MIN 10
#define LCD_CONTRAST_MAX 45
#define LCD_CONTRAST_DEFAULT 25
void lcdInit();
void lcdRefresh();
#define lcdRefreshWait()
void lcdSetRefVolt(uint8_t val);
void lcdSetContrast();
// USB driver
void usbMassStorage();
#if !defined(SIMU)
void usbJoystickUpdate();
#endif
#define PIN_ENABLE 0x001
#define PIN_PERIPHERAL 0x000
#define PIN_INPUT 0x002
#define PIN_OUTPUT 0x000
#define PIN_PULLUP 0x004
#define PIN_NO_PULLUP 0x000
#define PIN_PULLDOWN 0x008
#define PIN_NO_PULLDOWN 0x000
#define PIN_PERI_MASK_L 0x010
#define PIN_PERI_MASK_H 0x020
#define PIN_PER_A 0x000
#define PIN_PER_B 0x010
#define PIN_PER_C 0x020
#define PIN_PER_D 0x030
#define PIN_PORT_MASK 0x0C0
#define PIN_PORTA 0x000
#define PIN_PORTB 0x040
#define PIN_PORTC 0x080
#define PIN_LOW 0x000
#define PIN_HIGH 0x100
// Telemetry port
#define SECOND_USART USART0
#define SECOND_ID ID_USART0
#define SECOND_PINS { PINS_USART0 }
void configure_pins( uint32_t pins, uint16_t config );
uint16_t getCurrent();
extern uint16_t Current_analogue;
extern uint16_t Current_max;
extern uint32_t Current_accumulator;
extern uint32_t Current_used;
extern uint16_t sessionTimer;
void calcConsumption();
// Trainer driver
#define SLAVE_MODE() (pwrCheck() == e_power_trainer)
#define TRAINER_CONNECTED() (PIOA->PIO_PDSR & PIO_PA8)
void init_trainer_capture();
void stop_trainer_capture();
// Write Flash driver
#define FLASH_PAGESIZE 256
void flashWrite(uint32_t * address, uint32_t * buffer);
// Keys driver
uint32_t switchState(uint8_t index);
uint32_t readKeys();
uint32_t readTrims();
#define NUM_TRIMS 4
#define NUM_TRIMS_KEYS (NUM_TRIMS * 2)
#define TRIMS_PRESSED() readTrims()
#define KEYS_PRESSED() readKeys()
// Pulses driver
void extmoduleSerialStart(uint32_t baudrate, uint32_t period_half_us, bool inverted);
void extmoduleSendNextFrame();
void module_output_active();
inline void EXTERNAL_MODULE_ON()
{
module_output_active();
}
// SD driver
#if defined(SIMU)
#define sdInit()
#define sdDone()
#else
#define sdPoll10ms()
#if defined(__cplusplus)
extern "C" {
#endif
void init_SDcard();
void sdInit();
void sdDone();
uint32_t sd_card_ready();
uint32_t sdMounted();
#if defined(__cplusplus)
}
#endif
#endif
// WDT driver
#if !defined(WATCHDOG) || defined(SIMU)
#define wdt_enable(x)
#define wdt_reset()
#define IS_RESET_REASON_WATCHDOG() false
#else
#define wdt_enable(x) WDT->WDT_MR = 0x3FFF207F
#define wdt_reset() WDT->WDT_CR = 0xA5000001
#define IS_RESET_REASON_WATCHDOG() ((ResetReason & RSTC_SR_RSTTYP) == (2 << 8))
#endif
// Backlight driver
#define backlightEnable() (PWM->PWM_CH_NUM[0].PWM_CDTY = g_eeGeneral.backlightBright)
#define backlightDisable() (PWM->PWM_CH_NUM[0].PWM_CDTY = 100)
#define isBacklightEnabled() (PWM->PWM_CH_NUM[0].PWM_CDTY != 100)
#define BACKLIGHT_ENABLE() backlightEnable()
#define BACKLIGHT_DISABLE() backlightDisable()
// ADC driver
#define NUM_POTS 3
#define STORAGE_NUM_POTS 3
#define NUM_SLIDERS 0
#define STORAGE_NUM_SLIDERS 0
#define NUM_XPOTS 0
#define NUM_MOUSE_ANALOGS 0
#define STORAGE_NUM_MOUSE_ANALOGS 0
enum Analogs {
STICK1,
STICK2,
STICK3,
STICK4,
POT_FIRST,
POT1 = POT_FIRST,
POT2,
POT3,
POT_LAST = POT3,
TX_VOLTAGE,
TX_CURRENT,
NUM_ANALOGS
};
enum CalibratedAnalogs {
CALIBRATED_STICK1,
CALIBRATED_STICK2,
CALIBRATED_STICK3,
CALIBRATED_STICK4,
CALIBRATED_POT_FIRST,
CALIBRATED_POT1 = CALIBRATED_POT_FIRST,
CALIBRATED_POT2,
CALIBRATED_POT3,
CALIBRATED_POT_LAST = CALIBRATED_POT3,
NUM_CALIBRATED_ANALOGS
};
#define IS_POT(x) ((x)>=POT_FIRST && (x)<=POT_LAST)
#define IS_SLIDER(x) false
#define STICKS_PWM_ENABLED() false
void adcInit();
void adcRead();
uint16_t getAnalogValue(uint8_t index);
void setSticksGain(uint8_t gains);
inline void enableVBatBridge()
{
}
inline void disableVBatBridge()
{
}
// Battery driver
uint16_t getBatteryVoltage(); // returns current battery voltage in 10mV steps
#define BATTERY_MIN 90 // 9V
#define BATTERY_MAX 120 // 12V
#define BATTERY_WARN 90 // 9V
// Buzzer driver
void buzzerSound(uint8_t duration);
void buzzerHeartbeat();
#define BUZZER_HEARTBEAT buzzerHeartbeat
// i2c driver
void i2cCheck();
// Coproc driver
void coprocInit();
void coprocWriteData(uint8_t *data, uint32_t size);
#if defined(__cplusplus)
void coprocReadData(bool onlytemp=false);
#endif
extern int8_t volumeRequired;
#if defined(COPROCESSOR)
struct CoprocData {
uint8_t read;
int8_t valid;
int8_t temp;
int8_t maxtemp;
};
extern CoprocData coprocData;
#endif
// Haptic driver
#define HAPTIC_PWM
void hapticOff();
void hapticOn(uint32_t pwmPercent);
// BlueTooth driver
#if defined(BLUETOOTH)
void btInit();
void bluetoothTask(void * pdata);
void btPushByte(uint8_t data);
#endif
// Power driver
#define TRAINER_PWR
#define SOFT_PWR_CTRL
void pwrInit();
void pwrOff();
void pwrOn();
uint32_t pwrCheck();
bool pwrPressed();
#define UNEXPECTED_SHUTDOWN() (g_eeGeneral.unexpectedShutdown)
// EEPROM driver
#define EEPROM_SIZE (4*1024*1024/8)
#define EEPROM_BLOCK_SIZE (4*1024)
void eepromInit();
uint8_t eepromReadStatus();
uint8_t eepromIsTransferComplete();
void eepromBlockErase(uint32_t address);
void eepromStartRead(uint8_t * buffer, size_t address, size_t size);
void eepromStartWrite(uint8_t * buffer, size_t address, size_t size);
// Debug driver
void debugPutc(const char c);
// Telemetry driver
void telemetryPortInit(uint32_t baudrate, uint8_t mode);
inline void telemetryPortSetDirectionOutput()
{
}
uint32_t telemetryTransmitPending();
void telemetryTransmitBuffer(const uint8_t * buffer, uint32_t size);
void rxPdcUsart( void (*pChProcess)(uint8_t x) );
void sportSendBuffer(const uint8_t * buffer, uint32_t size);
// Second UART driver
void auxSerialTelemetryInit(unsigned int protocol);
void auxSerialPutc(const unsigned char c);
#if defined(__cplusplus)
bool telemetrySecondPortReceive(uint8_t & data);
#endif
extern const uint8_t BootCode[];
#endif // _BOARD_SKY9X_H_