Files
edgetx-gx12/src/stock/board_stock.h
T
2013-01-23 17:40:37 +00:00

97 lines
3.4 KiB
C

/*
* Authors (alphabetical order)
* - Andre Bernet <bernet.andre@gmail.com>
* - Bertrand Songis <bsongis@gmail.com>
* - Bryan J. Rentoul (Gruvin) <gruvin@gmail.com>
* - Cameron Weeks <th9xer@gmail.com>
* - Erez Raviv
* - Jean-Pierre Parisy
* - Karl Szmutny <shadow@privy.de>
* - Michael Blandford
* - Michal Hlavinka
* - Pat Mackenzie
* - Philip Moss
* - Rob Thomson
* - Romolo Manfredini <romolo.manfredini@gmail.com>
* - Thomas Husterer
*
* open9x is based on code named
* gruvin9x by Bryan J. Rentoul: http://code.google.com/p/gruvin9x/,
* er9x by Erez Raviv: http://code.google.com/p/er9x/,
* and the original (and ongoing) project by
* Thomas Husterer, th9x: http://code.google.com/p/th9x/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef board_stock_h
#define board_stock_h
#define GPIO_BUTTON_MENU pinb
#define GPIO_BUTTON_EXIT pinb
#define GPIO_BUTTON_RIGHT pinb
#define GPIO_BUTTON_LEFT pinb
#define GPIO_BUTTON_UP pinb
#define GPIO_BUTTON_DOWN pinb
#define PIN_BUTTON_MENU (1<<INP_B_KEY_MEN)
#define PIN_BUTTON_EXIT (1<<INP_B_KEY_EXT)
#define PIN_BUTTON_UP (1<<INP_B_KEY_UP)
#define PIN_BUTTON_DOWN (1<<INP_B_KEY_DWN)
#define PIN_BUTTON_RIGHT (1<<INP_B_KEY_RGT)
#define PIN_BUTTON_LEFT (1<<INP_B_KEY_LFT)
#define GPIO_TRIM_LH_L pind
#define GPIO_TRIM_LV_DN pind
#define GPIO_TRIM_RV_UP pind
#define GPIO_TRIM_RH_L pind
#define GPIO_TRIM_LH_R pind
#define GPIO_TRIM_LV_UP pind
#define GPIO_TRIM_RV_DN pind
#define GPIO_TRIM_RH_R pind
#define PIN_TRIM_LH_L (1<<INP_D_TRM_LH_DWN)
#define PIN_TRIM_LV_DN (1<<INP_D_TRM_LV_DWN)
#define PIN_TRIM_RV_UP (1<<INP_D_TRM_RV_UP)
#define PIN_TRIM_RH_L (1<<INP_D_TRM_RH_DWN)
#define PIN_TRIM_LH_R (1<<INP_D_TRM_LH_UP)
#define PIN_TRIM_LV_UP (1<<INP_D_TRM_LV_UP)
#define PIN_TRIM_RV_DN (1<<INP_D_TRM_RV_DWN)
#define PIN_TRIM_RH_R (1<<INP_D_TRM_RH_UP)
#define TIMER_16KHZ_VECT TIMER0_OVF_vect
#define COUNTER_16KHZ TCNT0
#define TIMER_10MS_VECT TIMER0_COMP_vect
#define PAUSE_10MS_INTERRUPT() TIMSK &= ~(1<<OCIE0)
#define RESUME_10MS_INTERRUPT() TIMSK |= (1<<OCIE0)
#define PAUSE_PULSES_INTERRUPT() TIMSK &= ~(1<<OCIE1A);
#define RESUME_PULSES_INTERRUPT() TIMSK |= (1<<OCIE1A)
#define PAUSE_PPMIN_INTERRUPT() ETIMSK &= ~(1<<TICIE3)
#define RESUME_PPMIN_INTERRUPT() ETIMSK |= (1<<TICIE3)
bool checkSlaveMode();
#define SLAVE_MODE() checkSlaveMode()
#define JACK_PPM_OUT() PORTG &= ~(1<<OUT_G_SIM_CTL)
#define JACK_PPM_IN() PORTG |= (1<<OUT_G_SIM_CTL)
#if defined(SP22)
#define __BACKLIGHT_ON PORTB &= ~(1 << OUT_B_LIGHT)
#define __BACKLIGHT_OFF PORTB |= (1 << OUT_B_LIGHT)
#define IS_BACKLIGHT_ON() (~PORTB & (1<<OUT_B_LIGHT))
#else
#define __BACKLIGHT_ON PORTB |= (1 << OUT_B_LIGHT)
#define __BACKLIGHT_OFF PORTB &= ~(1 << OUT_B_LIGHT)
#define IS_BACKLIGHT_ON() (PORTB & (1<<OUT_B_LIGHT))
#endif
#endif