Files
edgetx-gx12/src/sky9x/board_sky9x.h
T
2013-01-16 20:53:43 +00:00

196 lines
6.0 KiB
C

/*
* Authors (alphabetical order)
* - Andre Bernet <bernet.andre@gmail.com>
* - Bertrand Songis <bsongis@gmail.com>
* - Bryan J. Rentoul (Gruvin) <gruvin@gmail.com>
* - Cameron Weeks <th9xer@gmail.com>
* - Erez Raviv
* - Jean-Pierre Parisy
* - Karl Szmutny <shadow@privy.de>
* - Michael Blandford
* - Michal Hlavinka
* - Pat Mackenzie
* - Philip Moss
* - Rob Thomson
* - Romolo Manfredini <romolo.manfredini@gmail.com>
* - Thomas Husterer
*
* open9x is based on code named
* gruvin9x by Bryan J. Rentoul: http://code.google.com/p/gruvin9x/,
* er9x by Erez Raviv: http://code.google.com/p/er9x/,
* and the original (and ongoing) project by
* Thomas Husterer, th9x: http://code.google.com/p/th9x/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef board_sky9x_h
#define board_sky9x_h
#include <stdio.h>
#include "board.h"
#include "audio_driver.h"
extern "C" {
extern void init_SDcard();
extern void sdInit();
}
#if defined(REVA)
#define GPIO_BUTTON_MENU PIOB->PIO_PDSR
#define GPIO_BUTTON_EXIT PIOA->PIO_PDSR
#define GPIO_BUTTON_UP PIOC->PIO_PDSR
#define GPIO_BUTTON_DOWN PIOC->PIO_PDSR
#define GPIO_BUTTON_RIGHT PIOC->PIO_PDSR
#define GPIO_BUTTON_LEFT PIOC->PIO_PDSR
#define PIN_BUTTON_MENU 0x00000040
#define PIN_BUTTON_EXIT 0x80000000
#define PIN_BUTTON_UP 0x00000004
#define PIN_BUTTON_DOWN 0x00000008
#define PIN_BUTTON_RIGHT 0x00000010
#define PIN_BUTTON_LEFT 0x00000020
#else
#define GPIO_BUTTON_MENU PIOB->PIO_PDSR
#define GPIO_BUTTON_EXIT PIOC->PIO_PDSR
#define GPIO_BUTTON_UP PIOC->PIO_PDSR
#define GPIO_BUTTON_DOWN PIOC->PIO_PDSR
#define GPIO_BUTTON_RIGHT PIOC->PIO_PDSR
#define GPIO_BUTTON_LEFT PIOC->PIO_PDSR
#define PIN_BUTTON_MENU 0x00000020
#define PIN_BUTTON_EXIT 0x01000000
#define PIN_BUTTON_UP 0x00000002
#define PIN_BUTTON_DOWN 0x00000020
#define PIN_BUTTON_RIGHT 0x00000010
#define PIN_BUTTON_LEFT 0x00000008
#endif
#define sdPoll10ms()
void usbMassStorage();
#define PIN_ENABLE 0x001
#define PIN_PERIPHERAL 0x000
#define PIN_INPUT 0x002
#define PIN_OUTPUT 0x000
#define PIN_PULLUP 0x004
#define PIN_NO_PULLUP 0x000
#define PIN_PULLDOWN 0x008
#define PIN_NO_PULLDOWN 0x000
#define PIN_PERI_MASK_L 0x010
#define PIN_PERI_MASK_H 0x020
#define PIN_PER_A 0x000
#define PIN_PER_B 0x010
#define PIN_PER_C 0x020
#define PIN_PER_D 0x030
#define PIN_PORT_MASK 0x0C0
#define PIN_PORTA 0x000
#define PIN_PORTB 0x040
#define PIN_PORTC 0x080
#define PIN_LOW 0x000
#define PIN_HIGH 0x100
void configure_pins( uint32_t pins, uint16_t config );
uint16_t getCurrent();
extern uint8_t temperature ; // Raw temp reading
extern uint8_t maxTemperature ; // Raw temp reading
uint8_t getTemperature();
#define strcpy_P strcpy
#define strcat_P strcat
extern uint32_t readKeys();
#define KEYS_PRESSED() (~readKeys())
#define DBLKEYS_PRESSED_RGT_LFT(i) ((in & (0x20 + 0x40)) == (0x20 + 0x40))
#define DBLKEYS_PRESSED_UP_DWN(i) ((in & (0x10 + 0x08)) == (0x10 + 0x08))
#define DBLKEYS_PRESSED_RGT_UP(i) ((in & (0x20 + 0x10)) == (0x20 + 0x10))
#define DBLKEYS_PRESSED_LFT_DWN(i) ((in & (0x40 + 0x08)) == (0x40 + 0x08))
#if !defined(REVA)
extern uint16_t Current_analogue;
extern uint16_t Current_max;
extern uint32_t Current_accumulator;
extern uint32_t Current_used;
extern uint16_t sessionTimer;
#endif
#if defined(REVC)
#define BOOTLOADER_REQUEST() (usbPlugged())
#else
#define BOOTLOADER_REQUEST() (pwrCheck() == e_power_usb)
#endif
#define SLAVE_MODE() (pwrCheck() == e_power_trainer)
#define JACK_PPM_OUT() PIOC->PIO_PDR = PIO_PC22
#define JACK_PPM_IN() PIOC->PIO_PER = PIO_PC22
void setSticksGain(uint8_t gains);
// WDT driver
#if !defined(SIMU)
#define wdt_disable()
#define wdt_enable(x) WDT->WDT_MR = 0x3FFF217F;
#define wdt_reset() WDT->WDT_CR = 0xA5000001
#endif
// Backlight driver
#define setBacklight(xx) PWM->PWM_CH_NUM[0].PWM_CDTYUPD = xx
#define __BACKLIGHT_ON (PWM->PWM_CH_NUM[0].PWM_CDTY = g_eeGeneral.backlightBright)
#define __BACKLIGHT_OFF (PWM->PWM_CH_NUM[0].PWM_CDTY = 100)
#define IS_BACKLIGHT_ON() (PWM->PWM_CH_NUM[0].PWM_CDTY != 100)
// ADC driver
void adcInit();
void adcRead(void);
extern uint16_t Analog_values[];
// Buzzer driver
void buzzerSound(uint8_t duration);
void buzzerHeartbeat();
#define BUZZER_HEARTBEAT buzzerHeartbeat
// Coproc driver
void coprocInit();
void coprocWriteData(uint8_t *data, uint32_t size);
void coprocReadData(bool onlytemp=false);
void coprocCheck();
extern int8_t coprocVolumeRequired;
extern uint8_t coprocVolumeReadPending;
extern uint8_t Coproc_read;
extern int8_t Coproc_valid;
extern int8_t Coproc_temp;
extern int8_t Coproc_maxtemp;
// Haptic driver
void hapticOff(void) ;
void hapticOn(uint32_t pwmPercent);
// BlueTooth driver
#if defined(BLUETOOTH)
void btInit();
void btTask(void* pdata);
void btPushByte(uint8_t data);
#endif
// Power driver
void pwrInit();
void pwrOff();
uint32_t pwrCheck();
// EEPROM driver
void eepromInit();
// Rotary Encoder driver
void rotencInit();
void rotencEnd();
#endif