466 lines
18 KiB
C
466 lines
18 KiB
C
/*
|
|
* Copyright (C) EdgeTX
|
|
*
|
|
* Based on code named
|
|
* opentx - https://github.com/opentx/opentx
|
|
* th9x - http://code.google.com/p/th9x
|
|
* er9x - http://code.google.com/p/er9x
|
|
* gruvin9x - http://code.google.com/p/gruvin9x
|
|
*
|
|
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
|
|
/*
|
|
|
|
STM32H750
|
|
|
|
SDMMC uses own DMA controler
|
|
|
|
DMA1
|
|
Stream0: LED_STRIP_TIMER_DMA_STREAM
|
|
Stream1: INTMODULE_DMA_STREAM
|
|
Stream2: FLYSKY_HALL_DMA_Stream_RX (FLYSKY_GIMBAL) / PDM_CAPTURE_DMA_STREAM (!FLYSKY_GIMBAL)
|
|
Stream3: TELEMETRY_DMA_Stream_RX
|
|
Stream4: I2S_DMA_Stream
|
|
Stream5: INTMODULE_RX_DMA_STREAM
|
|
Stream6: AUX2_SERIAL_DMA_RX_STREAM
|
|
Stream7: TELEMETRY_DMA_Stream_TX
|
|
|
|
DMA2
|
|
Stream0: ADC_EXT_DMA_STREAM (do not move)
|
|
Stream1: AUX_SERIAL_DMA_TX_STREAM
|
|
Stream2: AUX_SERIAL_DMA_RX_STREAM
|
|
Stream3: EXTMODULE_TIMER_DMA_STREAM
|
|
Stream4: ADC_DMA_STREAM (do not move)
|
|
Stream5: EXTMODULE_USART_RX_DMA_STREAM
|
|
Stream6: EXTMODULE_USART_TX_DMA_STREAM
|
|
Stream7: AUX2_SERIAL_DMA_TX_STREAM
|
|
|
|
TIM1: BACKLIGHT_TIMER
|
|
TIM2: LED_STRIP_TIMER
|
|
TIM3: HAPTIC_GPIO_TIMER
|
|
TIM4:
|
|
TIM5: EXTMODULE_TIMER
|
|
TIM7:
|
|
TIM8: TRAINER_TIMER
|
|
TIM12: MIXER_SCHEDULER_TIMER
|
|
TIM14: MS_TIMER
|
|
TIM15:
|
|
TIM16:
|
|
TIM17: ROTARY_ENCODER_TIMER
|
|
|
|
SAI1_Block_A: PDM_CLOCK (1 MHz bit-clock output on SAI1_CK1 / PE5, !FLYSKY_GIMBAL only)
|
|
*/
|
|
|
|
#ifndef _HAL_H_
|
|
#define _HAL_H_
|
|
|
|
#define CPU_FREQ 480000000
|
|
|
|
#define PERI1_FREQUENCY 120000000
|
|
#define PERI2_FREQUENCY 120000000
|
|
#define TIMER_MULT_APB1 2
|
|
#define TIMER_MULT_APB2 2
|
|
|
|
// Expanders
|
|
#define IO_INT_GPIO GPIO_PIN(GPIOD, 3)
|
|
#define IO_RESET_GPIO GPIO_PIN(GPIOG, 10)
|
|
#if !defined(USE_EXTI3_IRQ)
|
|
#define USE_EXTI3_IRQ
|
|
#define EXTI3_IRQ_Priority 9
|
|
#endif
|
|
|
|
// ADC
|
|
#define ADC_VREF_PREC2 330
|
|
|
|
#define USE_EXTI9_5_IRQ // used for I2C port extender interrupt
|
|
#define EXTI9_5_IRQ_Priority 5
|
|
|
|
// Power
|
|
#define PWR_SWITCH_GPIO GPIO_PIN(GPIOA, 4)
|
|
#define PWR_ON_GPIO GPIO_PIN(GPIOH, 12)
|
|
|
|
// Chargers (USB and wireless)
|
|
#define UCHARGER_GPIO GPIO_PIN(GPIOD, 11)
|
|
#define UCHARGER_EN_GPIO GPIO_PIN(GPIOB, 12)
|
|
|
|
// TODO! Check IOLL1 to PI.01 connectivity!
|
|
|
|
// S.Port update connector
|
|
#define HAS_SPORT_UPDATE_CONNECTOR() (false)
|
|
|
|
// Telemetry
|
|
#define TELEMETRY_SET_INPUT 0
|
|
#define TELEMETRY_TX_GPIO GPIO_PIN(GPIOA, 9)
|
|
#define TELEMETRY_RX_GPIO GPIO_UNDEF
|
|
#define TELEMETRY_USART USART1
|
|
#define TELEMETRY_USART_IRQn USART1_IRQn
|
|
#define TELEMETRY_DMA DMA1
|
|
#define TELEMETRY_DMA_Stream_TX LL_DMA_STREAM_7
|
|
#define TELEMETRY_DMA_Channel_TX LL_DMAMUX1_REQ_USART1_TX
|
|
#define TELEMETRY_DMA_TX_Stream_IRQ DMA1_Stream7_IRQn
|
|
#define TELEMETRY_DMA_TX_IRQHandler DMA1_Stream7_IRQHandler
|
|
#define TELEMETRY_DMA_Stream_RX LL_DMA_STREAM_3
|
|
#define TELEMETRY_DMA_Channel_RX LL_DMAMUX1_REQ_USART1_RX
|
|
#define TELEMETRY_USART_IRQHandler USART1_IRQHandler
|
|
|
|
// Software IRQ (Prio 5 -> FreeRTOS compatible)
|
|
#define TELEMETRY_USE_CUSTOM_EXTI
|
|
#define CUSTOM_EXTI_IRQ_NAME ETH_WKUP_IRQ
|
|
#define ETH_WKUP_IRQ_Priority 5
|
|
#define CUSTOM_EXTI_IRQ_LINE 86
|
|
#define TELEMETRY_RX_FRAME_EXTI_LINE CUSTOM_EXTI_IRQ_LINE
|
|
|
|
// USB
|
|
#define USB_GPIO GPIOA
|
|
#define USB_GPIO_VBUS GPIO_PIN(GPIOH, 5)
|
|
#define USB_GPIO_DM GPIO_PIN(GPIOA, 11)
|
|
#define USB_GPIO_DP GPIO_PIN(GPIOA, 12)
|
|
#define USB_GPIO_AF GPIO_AF10
|
|
|
|
// LCD
|
|
#define LCD_SPI_CS_GPIO GPIOA
|
|
#define LCD_SPI_CS_GPIO_PIN LL_GPIO_PIN_7
|
|
#define LCD_SPI_SCK_GPIO GPIOB
|
|
#define LCD_SPI_SCK_GPIO_PIN LL_GPIO_PIN_0
|
|
#define LCD_SPI_MOSI_GPIO GPIOI
|
|
#define LCD_SPI_MOSI_GPIO_PIN LL_GPIO_PIN_9
|
|
|
|
#define LTDC_IRQ_PRIO 4
|
|
#define DMA_SCREEN_IRQ_PRIO 6
|
|
|
|
#define LCD_RESET_GPIO GPIOJ
|
|
#define LCD_RESET_GPIO_PIN LL_GPIO_PIN_12
|
|
|
|
#define LCD_TE_GPIO GPIOI
|
|
#define LCD_TE_GPIO_PIN LL_GPIO_PIN_4
|
|
|
|
// Backlight
|
|
#define BACKLIGHT_GPIO GPIO_PIN(GPIOA, 10) // TIM1_CH3
|
|
#define BACKLIGHT_TIMER TIM1
|
|
#define BACKLIGHT_TIMER_CHANNEL LL_TIM_CHANNEL_CH3
|
|
#define BACKLIGHT_GPIO_AF GPIO_AF1
|
|
#define BACKLIGHT_TIMER_FREQ (PERI1_FREQUENCY * TIMER_MULT_APB1)
|
|
|
|
// QSPI Flash
|
|
#define QSPI_CLK_GPIO GPIO_PIN(GPIOF, 10)
|
|
#define QSPI_CLK_GPIO_AF GPIO_AF9
|
|
#define QSPI_CS_GPIO GPIO_PIN(GPIOG, 6)
|
|
#define QSPI_CS_GPIO_AF GPIO_AF10
|
|
#define QSPI_MISO_GPIO GPIO_PIN(GPIOF, 9)
|
|
#define QSPI_MISO_GPIO_AF GPIO_AF10
|
|
#define QSPI_MOSI_GPIO GPIO_PIN(GPIOF, 8)
|
|
#define QSPI_MOSI_GPIO_AF GPIO_AF10
|
|
#define QSPI_WP_GPIO GPIO_PIN(GPIOF, 7)
|
|
#define QSPI_WP_GPIO_AF GPIO_AF9
|
|
#define QSPI_HOLD_GPIO GPIO_PIN(GPIOF, 6)
|
|
#define QSPI_HOLD_GPIO_AF GPIO_AF9
|
|
#define QSPI_FLASH_SIZE 0x1000000
|
|
|
|
|
|
// SD
|
|
#define SD_SDIO SDMMC1
|
|
#define SD_SDIO_CLK_DIV(fq) (HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC) / (2 * fq))
|
|
#define SD_SDIO_TRANSFER_CLK_DIV SD_SDIO_CLK_DIV(24000000) // Hz
|
|
|
|
#define SD2_PRESENT_GPIO GPIO_PIN(GPIOH, 8) // PH.08
|
|
#define SD2_SDIO SDMMC2
|
|
#define SD2_SDIO_PIN_D0 GPIO_PIN(GPIOB, 14)
|
|
#define SD2_SDIO_AF_D0 GPIO_AF9
|
|
#define SD2_SDIO_PIN_D1 GPIO_PIN(GPIOB, 15)
|
|
#define SD2_SDIO_AF_D1 GPIO_AF9
|
|
#define SD2_SDIO_PIN_D2 GPIO_PIN(GPIOG, 11)
|
|
#define SD2_SDIO_AF_D2 GPIO_AF10
|
|
#define SD2_SDIO_PIN_D3 GPIO_PIN(GPIOB, 4)
|
|
#define SD2_SDIO_AF_D3 GPIO_AF9
|
|
#define SD2_SDIO_PIN_CLK GPIO_PIN(GPIOD, 6)
|
|
#define SD2_SDIO_AF_CLK GPIO_AF11
|
|
#define SD2_SDIO_PIN_CMD GPIO_PIN(GPIOD, 7)
|
|
#define SD2_SDIO_AF_CMD GPIO_AF11
|
|
#define SD2_SDIO_TRANSFER_CLK_DIV SD_SDIO_CLK_DIV(24000000) // Hz
|
|
|
|
#define STORAGE_USE_SDIO
|
|
|
|
|
|
// AUDIO
|
|
#define AUDIO_I2C I2C_Bus_1
|
|
#define AUDIO_SPI SPI2
|
|
#define AUDIO_RESET_PIN GPIO_PIN(GPIOH, 10)
|
|
#define AUDIO_HP_DETECT_PIN GPIO_PIN(GPIOA, 5)
|
|
#define I2S_DMA DMA1
|
|
#define I2S_DMA_Stream LL_DMA_STREAM_4
|
|
#define I2S_DMA_Stream_Request LL_DMAMUX1_REQ_SPI2_TX
|
|
#define I2S_DMA_Stream_IRQn DMA1_Stream4_IRQn
|
|
#define I2S_DMA_Stream_IRQHandler DMA1_Stream4_IRQHandler
|
|
|
|
// MEMS PDM microphone — not available when FLYSKY_GIMBAL is enabled
|
|
#if !defined(FLYSKY_GIMBAL)
|
|
#define PDM_CLOCK GPIO_PIN(GPIOE, 5)
|
|
#define PDM_CLOCK_GPIO_AF LL_GPIO_AF_6
|
|
#define PDM_SAI_BLOCK SAI1_Block_A
|
|
#define PDM_SAI_KER_FREQ 48000000 // PLL1Q (see system_clock.c)
|
|
#define PDM_CLOCK_FREQ 1600000 // 1.6 MHz → MCKDIV=30, R=100 → 16 kHz PCM direct
|
|
#define PDM_DATA GPIO_PIN(GPIOE, 4)
|
|
#define PDM_DATA_GPIO_PORT GPIOE
|
|
#define PDM_DATA_GPIO_PIN 4
|
|
#define PDM_DATA_IDR_MASK (1U << PDM_DATA_GPIO_PIN)
|
|
#define PDM_CAPTURE_DMA DMA1
|
|
#define PDM_CAPTURE_DMA_STREAM LL_DMA_STREAM_2
|
|
#define PDM_CAPTURE_DMA_REQUEST LL_DMAMUX1_REQ_TIM15_UP
|
|
#define PDM_CAPTURE_TIMER TIM15
|
|
#define PDM_CAPTURE_TIMER_FREQ (PERI2_FREQUENCY * TIMER_MULT_APB2)
|
|
#endif
|
|
|
|
|
|
// I2C Bus
|
|
#define I2C_B1 I2C4
|
|
#define I2C_B1_SDA_GPIO GPIO_PIN(GPIOD, 13) // PD.13
|
|
#define I2C_B1_SCL_GPIO GPIO_PIN(GPIOD, 12) // PD.12
|
|
#define I2C_B1_GPIO_AF LL_GPIO_AF_4
|
|
#define I2C_B1_CLK_RATE 400000
|
|
|
|
// Haptic: TIM3_CH2
|
|
#define HAPTIC_PWM
|
|
#define HAPTIC_GPIO GPIO_PIN(GPIOC, 7)
|
|
#define HAPTIC_GPIO_TIMER TIM3
|
|
#define HAPTIC_GPIO_AF GPIO_AF2
|
|
#define HAPTIC_TIMER_OUTPUT_ENABLE TIM_CCER_CC2E | TIM_CCER_CC2NE;
|
|
#define HAPTIC_TIMER_MODE TIM_CCMR1_OC2M_1 | TIM_CCMR1_OC2M_2 | TIM_CCMR1_OC2PE
|
|
#define HAPTIC_TIMER_COMPARE_VALUE HAPTIC_GPIO_TIMER->CCR2
|
|
|
|
// LED Strip
|
|
#define LED_STRIP_LENGTH 26 // 6POS + 2 rings of 10
|
|
#define BLING_LED_STRIP_START 6
|
|
#define BLING_LED_STRIP_LENGTH 20
|
|
#define CFS_LED_STRIP_START 0
|
|
#define CFS_LED_STRIP_LENGTH 6
|
|
#define CFS_LEDS_PER_SWITCH 1
|
|
#define LED_STRIP_GPIO GPIO_PIN(GPIOA, 0) // PA.00 / TIM2_CH1
|
|
#define LED_STRIP_GPIO_AF LL_GPIO_AF_1 // TIM1/2/16/17
|
|
#define LED_STRIP_TIMER TIM2
|
|
#define LED_STRIP_TIMER_FREQ (PERI1_FREQUENCY * TIMER_MULT_APB1)
|
|
#define LED_STRIP_TIMER_CHANNEL LL_TIM_CHANNEL_CH1
|
|
#define LED_STRIP_TIMER_DMA DMA1
|
|
#define LED_STRIP_TIMER_DMA_CHANNEL LL_DMAMUX1_REQ_TIM2_UP
|
|
#define LED_STRIP_TIMER_DMA_STREAM LL_DMA_STREAM_0
|
|
#define LED_STRIP_TIMER_DMA_IRQn DMA1_Stream0_IRQn
|
|
#define LED_STRIP_TIMER_DMA_IRQHandler DMA1_Stream0_IRQHandler
|
|
#define LED_STRIP_REFRESH_PERIOD 50 //ms
|
|
|
|
#define STATUS_LEDS
|
|
#define GPIO_LED_GPIO_ON gpio_set
|
|
#define GPIO_LED_GPIO_OFF gpio_clear
|
|
#define LED_RED_GPIO GPIO_PIN(GPIOI, 8) // PI.08
|
|
#define LED_GREEN_GPIO GPIO_PIN(GPIOI, 11) // PI.11
|
|
#define LED_BLUE_GPIO GPIO_PIN(GPIOI, 10) // PI.10
|
|
|
|
// Internal Module
|
|
#define INTMODULE_PWR_GPIO GPIO_PIN(GPIOB, 13) // PB.13
|
|
#define INTMODULE_BOOTCMD_GPIO GPIO_PIN(GPIOH, 9) // PH.09
|
|
#define INTMODULE_BOOTCMD_DEFAULT 0
|
|
#define INTMODULE_TX_GPIO GPIO_PIN(GPIOG, 14)
|
|
#define INTMODULE_RX_GPIO GPIO_PIN(GPIOG, 9)
|
|
#define INTMODULE_USART USART6
|
|
#define INTMODULE_GPIO_AF LL_GPIO_AF_7
|
|
#define INTMODULE_USART_IRQn USART6_IRQn
|
|
#define INTMODULE_USART_IRQHandler USART6_IRQHandler
|
|
#define INTMODULE_DMA DMA1
|
|
#define INTMODULE_DMA_STREAM LL_DMA_STREAM_1
|
|
#define INTMODULE_DMA_STREAM_IRQ DMA1_Stream1_IRQn
|
|
#define INTMODULE_DMA_FLAG_TC DMA_FLAG_TCIF1
|
|
#define INTMODULE_DMA_CHANNEL LL_DMAMUX1_REQ_USART6_TX
|
|
#define INTMODULE_RX_DMA DMA1
|
|
#define INTMODULE_RX_DMA_STREAM LL_DMA_STREAM_5
|
|
#define INTMODULE_RX_DMA_CHANNEL LL_DMAMUX1_REQ_USART6_RX
|
|
#define INTMODULE_RX_DMA_Stream_IRQn DMA1_Stream5_IRQn
|
|
#define INTMODULE_RX_DMA_Stream_IRQHandler DMA1_Stream5_IRQHandler
|
|
|
|
// External Module
|
|
#define EXTMODULE
|
|
#define EXTMODULE_PULSES
|
|
#define EXTMODULE_PWR_GPIO GPIO_PIN(GPIOD, 4) // PD.04
|
|
#define EXTMODULE_TX_GPIO GPIO_PIN(GPIOA, 2) // TIM2_CH3, TIM5_CH3,TIM15_CH1,
|
|
#define EXTMODULE_RX_GPIO GPIO_PIN(GPIOA, 3)
|
|
#define EXTMODULE_TX_GPIO_AF LL_GPIO_AF_3 // TIM5_CH3
|
|
#define EXTMODULE_TIMER TIM5
|
|
#define EXTMODULE_TIMER_32BITS
|
|
#define EXTMODULE_TIMER_Channel LL_TIM_CHANNEL_CH3
|
|
#define EXTMODULE_TIMER_IRQn TIM5_IRQn
|
|
#define EXTMODULE_TIMER_IRQHandler TIM5_IRQHandler
|
|
#define EXTMODULE_TIMER_FREQ (PERI2_FREQUENCY * TIMER_MULT_APB2)
|
|
#define EXTMODULE_TIMER_TX_GPIO_AF LL_GPIO_AF_2
|
|
|
|
|
|
//USART
|
|
#define EXTMODULE_USART USART2
|
|
#define EXTMODULE_USART_TX_DMA DMA2
|
|
#define EXTMODULE_USART_TX_DMA_CHANNEL LL_DMAMUX1_REQ_USART2_TX
|
|
#define EXTMODULE_USART_TX_DMA_STREAM LL_DMA_STREAM_6
|
|
#define EXTMODULE_USART_RX_DMA_CHANNEL LL_DMAMUX1_REQ_USART2_RX
|
|
#define EXTMODULE_USART_RX_DMA_STREAM LL_DMA_STREAM_5
|
|
#define EXTMODULE_USART_IRQHandler USART2_IRQHandler
|
|
#define EXTMODULE_USART_IRQn USART2_IRQn
|
|
|
|
//TIMER
|
|
#define EXTMODULE_TIMER_DMA_CHANNEL LL_DMAMUX1_REQ_TIM5_UP
|
|
#define EXTMODULE_TIMER_DMA DMA2
|
|
#define EXTMODULE_TIMER_DMA_STREAM LL_DMA_STREAM_6
|
|
#define EXTMODULE_TIMER_DMA_STREAM_IRQn DMA2_Stream6_IRQn
|
|
#define EXTMODULE_TIMER_DMA_IRQHandler DMA2_Stream6_IRQHandler
|
|
|
|
// Trainer Port
|
|
#define TRAINER_RCC_AHB1Periph (RCC_AHB1Periph_GPIOA)
|
|
|
|
#define TRAINER_IN_GPIO GPIO_PIN(GPIOI, 6)
|
|
#define TRAINER_IN_TIMER_Channel LL_TIM_CHANNEL_CH2
|
|
|
|
#define TRAINER_OUT_GPIO GPIO_PIN(GPIOI, 5)
|
|
#define TRAINER_OUT_TIMER_Channel LL_TIM_CHANNEL_CH1
|
|
|
|
#define TRAINER_TIMER TIM8
|
|
#define TRAINER_TIMER_IRQn TIM8_CC_IRQn
|
|
#define TRAINER_TIMER_IRQHandler TIM8_CC_IRQHandler
|
|
#define TRAINER_GPIO_AF LL_GPIO_AF_3
|
|
#define TRAINER_TIMER_FREQ (PERI2_FREQUENCY * TIMER_MULT_APB2)
|
|
|
|
#define TRAINER_DETECT_GPIO GPIO_PIN(GPIOH, 4)
|
|
|
|
// AUX ports
|
|
#define AUX_SERIAL_TX_GPIO GPIO_PIN(GPIOB, 6) // PB.06
|
|
#define AUX_SERIAL_RX_GPIO GPIO_PIN(GPIOB, 5) // PB.05
|
|
#define AUX_SERIAL_USART UART5
|
|
#define AUX_SERIAL_USART_IRQHandler UART5_IRQHandler
|
|
#define AUX_SERIAL_USART_IRQn UART5_IRQn
|
|
#define AUX_SERIAL_DMA_TX DMA2
|
|
#define AUX_SERIAL_DMA_TX_STREAM LL_DMA_STREAM_1
|
|
#define AUX_SERIAL_DMA_TX_CHANNEL LL_DMAMUX1_REQ_UART5_TX
|
|
#define AUX_SERIAL_DMA_RX DMA2
|
|
#define AUX_SERIAL_DMA_RX_STREAM LL_DMA_STREAM_2
|
|
#define AUX_SERIAL_DMA_RX_CHANNEL LL_DMAMUX1_REQ_UART5_RX
|
|
#define AUX_SERIAL_PWR_GPIO GPIO_PIN(GPIOB, 7) // PB.07
|
|
|
|
#define AUX2_SERIAL_TX_GPIO GPIO_PIN(GPIOB, 10) // PB.10
|
|
#define AUX2_SERIAL_RX_GPIO GPIO_PIN(GPIOB, 11) // PB.11
|
|
#define AUX2_SERIAL_USART USART3
|
|
#define AUX2_SERIAL_USART_IRQHandler USART3_IRQHandler
|
|
#define AUX2_SERIAL_USART_IRQn USART3_IRQn
|
|
#define AUX2_SERIAL_DMA_TX DMA2
|
|
#define AUX2_SERIAL_DMA_TX_STREAM LL_DMA_STREAM_7
|
|
#define AUX2_SERIAL_DMA_TX_CHANNEL LL_DMAMUX1_REQ_USART3_TX
|
|
#define AUX2_SERIAL_DMA_RX DMA1
|
|
#define AUX2_SERIAL_DMA_RX_STREAM LL_DMA_STREAM_6
|
|
#define AUX2_SERIAL_DMA_RX_CHANNEL LL_DMAMUX1_REQ_USART3_RX
|
|
#define AUX2_SERIAL_PWR_GPIO GPIO_PIN(GPIOC, 13) // PC.13
|
|
|
|
#if defined(BLUETOOTH)
|
|
// Bluetooth
|
|
#define STORAGE_BLUETOOTH
|
|
#define BT_USART UART4
|
|
#define BT_USART_IRQn UART4_IRQn
|
|
#define BT_TX_GPIO GPIO_PIN(GPIOB, 9)
|
|
#define BT_RX_GPIO GPIO_PIN(GPIOB, 8)
|
|
#define BT_EN_GPIO GPIO_PIN(GPIOH, 11)
|
|
#elif defined(KCX_BTAUDIO)
|
|
#define BTAUDIO_LINKED_GPIO GPIO_PIN(GPIOH, 11)
|
|
#define BTAUDIO_CONNECT_GPIO GPIO_PIN(GPIOB, 9)
|
|
#endif
|
|
|
|
#if defined(FLYSKY_GIMBAL)
|
|
// FlySky Hall Sticks
|
|
#define FLYSKY_HALL_SERIAL_USART UART4
|
|
#define FLYSKY_HALL_SERIAL_TX_GPIO GPIO_PIN(GPIOB, 9)
|
|
#define FLYSKY_HALL_SERIAL_RX_GPIO GPIO_PIN(GPIOB, 8)
|
|
#define FLYSKY_HALL_SERIAL_USART_IRQn UART4_IRQn
|
|
#define FLYSKY_HALL_SERIAL_DMA DMA1
|
|
#define FLYSKY_HALL_DMA_Stream_RX LL_DMA_STREAM_2
|
|
#define FLYSKY_HALL_DMA_Channel LL_DMAMUX1_REQ_UART4_RX
|
|
#endif
|
|
|
|
// Touch
|
|
#define TOUCH_I2C_BUS I2C_Bus_1
|
|
#define TOUCH_INT_GPIO GPIO_PIN(GPIOE, 2) // PE.02
|
|
#define TOUCH_RST_GPIO GPIO_PIN(GPIOJ, 13) // PJ.13
|
|
|
|
// TOUCH_INT_EXTI IRQ
|
|
#if !defined(USE_EXTI2_IRQ)
|
|
#define USE_EXTI2_IRQ
|
|
#define EXTI2_IRQ_Priority 9
|
|
#endif
|
|
|
|
// IMU
|
|
#define IMU_I2C_BUS I2C_Bus_1
|
|
#define IMU_INT_GPIO GPIO_PIN(GPIOG, 13) // PG.13
|
|
|
|
// IMU_INT_EXTI IRQ
|
|
#if !defined(USE_EXTI15_10_IRQ)
|
|
#define USE_EXTI15_10_IRQ
|
|
#define EXTI15_10_IRQ_Priority 6
|
|
#endif
|
|
|
|
|
|
//ROTARY emulation for trims as buttons
|
|
#define ROTARY_ENCODER_NAVIGATION
|
|
// Rotary Encoder
|
|
#define ROTARY_ENCODER_INVERTED
|
|
#define ROTARY_ENCODER_GPIO_A GPIOI
|
|
#define ROTARY_ENCODER_GPIO_PIN_A LL_GPIO_PIN_7
|
|
#define ROTARY_ENCODER_GPIO_B GPIOJ
|
|
#define ROTARY_ENCODER_GPIO_PIN_B LL_GPIO_PIN_8
|
|
#define ROTARY_ENCODER_POSITION() (((ROTARY_ENCODER_GPIO_A->IDR >> 7) & 0x01)|((ROTARY_ENCODER_GPIO_B->IDR >> 7) & 0x02))
|
|
#define ROTARY_ENCODER_EXTI_LINE1 LL_EXTI_LINE_7
|
|
#define ROTARY_ENCODER_EXTI_LINE2 LL_EXTI_LINE_8
|
|
#if !defined(USE_EXTI7_IRQ)
|
|
#define USE_EXTI7_IRQ
|
|
#define EXTI7_IRQ_Priority 5
|
|
#endif
|
|
#if !defined(USE_EXTI8_IRQ)
|
|
#define USE_EXTI8_IRQ
|
|
#define EXTI8_IRQ_Priority 5
|
|
#endif
|
|
#define ROTARY_ENCODER_EXTI_PORT_A LL_SYSCFG_EXTI_PORTI
|
|
#define ROTARY_ENCODER_EXTI_PORT_B LL_SYSCFG_EXTI_PORTJ
|
|
#define ROTARY_ENCODER_EXTI_SYS_LINE1 LL_SYSCFG_EXTI_LINE7
|
|
#define ROTARY_ENCODER_EXTI_SYS_LINE2 LL_SYSCFG_EXTI_LINE8
|
|
#define ROTARY_ENCODER_TIMER TIM17
|
|
#define ROTARY_ENCODER_TIMER_IRQn TIM17_IRQn
|
|
#define ROTARY_ENCODER_TIMER_IRQHandler TIM17_IRQHandler
|
|
|
|
// Millisecond timer
|
|
#define MS_TIMER TIM14
|
|
#define MS_TIMER_IRQn TIM8_TRG_COM_TIM14_IRQn
|
|
#define MS_TIMER_IRQHandler TIM8_TRG_COM_TIM14_IRQHandler
|
|
|
|
// Mixer scheduler timer
|
|
#define MIXER_SCHEDULER_TIMER TIM12
|
|
#define MIXER_SCHEDULER_TIMER_FREQ (PERI1_FREQUENCY * TIMER_MULT_APB1)
|
|
#define MIXER_SCHEDULER_TIMER_IRQn TIM8_BRK_TIM12_IRQn
|
|
#define MIXER_SCHEDULER_TIMER_IRQHandler TIM8_BRK_TIM12_IRQHandler
|
|
|
|
#define LANDSCAPE_LCD true
|
|
#define PORTRAIT_LCD false
|
|
#define LANDSCAPE_LCD_SML false
|
|
#define LANDSCAPE_LCD_STD true
|
|
#define LANDSCAPE_LCD_LRG false
|
|
|
|
#define LCD_W 480
|
|
#define LCD_H 320
|
|
|
|
#define LCD_PHYS_W LCD_H
|
|
#define LCD_PHYS_H LCD_W
|
|
|
|
#define LCD_DEPTH 16
|
|
|
|
#define LSE_DRIVE_STRENGTH RCC_LSEDRIVE_HIGH
|
|
|
|
#endif // _HAL_H_
|