Files
edgetx-gx12/radio/src/targets/taranis/board_taranis.h
T

369 lines
13 KiB
C

/*
* Authors (alphabetical order)
* - Andre Bernet <bernet.andre@gmail.com>
* - Andreas Weitl
* - Bertrand Songis <bsongis@gmail.com>
* - Bryan J. Rentoul (Gruvin) <gruvin@gmail.com>
* - Cameron Weeks <th9xer@gmail.com>
* - Erez Raviv
* - Gabriel Birkus
* - Jean-Pierre Parisy
* - Karl Szmutny
* - Michael Blandford
* - Michal Hlavinka
* - Pat Mackenzie
* - Philip Moss
* - Rob Thomson
* - Romolo Manfredini <romolo.manfredini@gmail.com>
* - Thomas Husterer
*
* opentx is based on code named
* gruvin9x by Bryan J. Rentoul: http://code.google.com/p/gruvin9x/,
* er9x by Erez Raviv: http://code.google.com/p/er9x/,
* and the original (and ongoing) project by
* Thomas Husterer, th9x: http://code.google.com/p/th9x/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef _BOARD_TARANIS_H_
#define _BOARD_TARANIS_H_
#include "stddef.h"
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
#if defined(REV9E)
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_rcc.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_gpio.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_adc.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_spi.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_i2c.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_rtc.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_pwr.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dma.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_usart.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_flash.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dbgmcu.h"
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/STM32F4xx_StdPeriph_Driver/inc/misc.h"
#else
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_rcc.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_gpio.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_adc.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_spi.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_i2c.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_rtc.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_pwr.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_dma.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_usart.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_flash.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/stm32f2xx_dbgmcu.h"
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/misc.h"
#endif
#if !defined(SIMU)
#include "STM32_USB-Host-Device_Lib_V2.1.0/Libraries/STM32_USB_Device_Library/Class/msc/inc/usbd_msc_core.h"
#include "STM32_USB-Host-Device_Lib_V2.1.0/Libraries/STM32_USB_Device_Library/Class/hid/inc/usbd_hid_core.h"
#include "STM32_USB-Host-Device_Lib_V2.1.0/Libraries/STM32_USB_Device_Library/Core/inc/usbd_usr.h"
#include "usbd_desc.h"
#include "usb_conf.h"
#include "usbd_conf.h"
#endif
#include "hal.h"
#include "aspi.h"
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
#define FLASHSIZE 0x80000
#define BOOTLOADER_SIZE 0x8000
#define FIRMWARE_ADDRESS 0x08000000
#if defined(REV9E)
#define PERI1_FREQUENCY 42000000
#define PERI2_FREQUENCY 84000000
#else
#define PERI1_FREQUENCY 30000000
#define PERI2_FREQUENCY 60000000
#endif
#define TIMER_MULT_APB1 2
#define TIMER_MULT_APB2 2
#define PIN_MODE_MASK 0x0003
#define PIN_INPUT 0x0000
#define PIN_OUTPUT 0x0001
#define PIN_PERIPHERAL 0x0002
#define PIN_ANALOG 0x0003
#define PIN_PULL_MASK 0x000C
#define PIN_PULLUP 0x0004
#define PIN_PORT_MASK 0x0700
#define PIN_PORTA 0x0000
#define PIN_PORTB 0x0100
#define PIN_PORTC 0x0200
#define PIN_PORTD 0x0300
#define PIN_PORTE 0x0400
#define PIN_PORTF 0x0500
#define PIN_PERI_MASK 0x00F0
#define PIN_PER_1 0x0010
#define PIN_PER_2 0x0020
#define PIN_PER_3 0x0030
#define PIN_PER_5 0x0050
#define PIN_PER_6 0x0060
#define PIN_PER_8 0x0080
#define PIN_SPEED_MASK 0x6000
#define PIN_OS25 0x2000
#define PIN_OS50 0x4000
#define PIN_OS100 0x6000
void configure_pins( uint32_t pins, uint16_t config );
#define strcpy_P strcpy
#define strcat_P strcat
extern uint16_t sessionTimer;
#define SLAVE_MODE() (g_model.trainerMode == TRAINER_MODE_SLAVE)
#define TRAINER_CONNECTED() (GPIO_ReadInputDataBit(TRAINER_GPIO_DETECT, TRAINER_GPIO_PIN_DETECT) == Bit_RESET)
#ifdef __cplusplus
extern "C" {
#endif
void delaysInit(void);
void delay_01us(uint16_t nb);
#ifdef __cplusplus
}
#endif
// SD driver
#if !defined(SIMU) || defined(SIMU_DISKIO)
uint32_t sdIsHC(void);
uint32_t sdGetSpeed(void);
#define SD_IS_HC() (sdIsHC())
#define SD_GET_SPEED() (sdGetSpeed())
#define SD_GET_FREE_BLOCKNR() (sdGetFreeSectors())
#else
#define SD_IS_HC() (0)
#define SD_GET_SPEED() (0)
#endif
#if defined(SIMU)
#define sdInit()
#define sdDone()
#else
void sdInit(void);
void sdDone(void);
void sdPoll10ms(void);
#define sdMountPoll()
uint32_t sdMounted(void);
#define SD_CARD_PRESENT() (~SD_GPIO_PRESENT->IDR & SD_GPIO_PIN_PRESENT)
#endif
// Flash Write driver
#define FLASH_PAGESIZE 256
void unlockFlash(void);
void lockFlash(void);
void writeFlash(uint32_t * address, uint32_t * buffer);
uint32_t isFirmwareStart(const void * buffer);
uint32_t isBootloaderStart(const void * buffer);
// Pulses driver
#define INTERNAL_MODULE_ON() GPIO_SetBits(INTMODULE_GPIO_PWR, INTMODULE_GPIO_PIN_PWR)
#define INTERNAL_MODULE_OFF() GPIO_ResetBits(INTMODULE_GPIO_PWR, INTMODULE_GPIO_PIN_PWR)
#define EXTERNAL_MODULE_ON() GPIO_SetBits(EXTMODULE_GPIO_PWR, EXTMODULE_GPIO_PIN_PWR)
#define EXTERNAL_MODULE_OFF() GPIO_ResetBits(EXTMODULE_GPIO_PWR, EXTMODULE_GPIO_PIN_PWR)
#define IS_INTERNAL_MODULE_ON() (GPIO_ReadInputDataBit(INTMODULE_GPIO_PWR, INTMODULE_GPIO_PIN_PWR) == Bit_SET)
#define IS_EXTERNAL_MODULE_ON() (GPIO_ReadInputDataBit(EXTMODULE_GPIO_PWR, EXTMODULE_GPIO_PIN_PWR) == Bit_SET)
void init_no_pulses(uint32_t port);
void disable_no_pulses(uint32_t port);
void init_ppm( uint32_t module_index );
void disable_ppm( uint32_t module_index );
void set_external_ppm_parameters(uint32_t idleTime, uint32_t delay, uint32_t positive);
#if defined(TARANIS_INTERNAL_PPM)
void set_internal_ppm_parameters(uint32_t idleTime, uint32_t delay, uint32_t positive);
#endif
void init_pxx( uint32_t module_index );
void disable_pxx( uint32_t module_index );
void init_dsm2( uint32_t module_index );
void disable_dsm2( uint32_t module_index );
// Trainer driver
void init_trainer_ppm(void);
void stop_trainer_ppm(void);
void init_trainer_capture(void);
void stop_trainer_capture(void);
void init_cppm_on_heartbeat_capture(void);
void stop_cppm_on_heartbeat_capture(void);
void init_sbus_on_heartbeat_capture(void);
void stop_sbus_on_heartbeat_capture(void);
void set_trainer_ppm_parameters(uint32_t idleTime, uint32_t delay, uint32_t positive);
// Keys driver
void keysInit(void);
uint32_t readKeys(void);
uint32_t readTrims(void);
#define TRIMS_PRESSED() (readTrims())
#define KEYS_PRESSED() (readKeys())
#if defined(REV9E)
// Rotary Encoder driver
void rotencInit(void);
void rotencEnd(void);
void checkRotaryEncoder(void);
#endif
// WDT driver
#if !defined(SIMU)
#define wdt_disable()
void watchdogInit(unsigned int duration);
#define wdt_enable(x) watchdogInit(1500)
#define wdt_reset() IWDG->KR = 0xAAAA
#define WAS_RESET_BY_WATCHDOG() (RCC->CSR & (RCC_CSR_WDGRSTF | RCC_CSR_WWDGRSTF))
#define WAS_RESET_BY_SOFTWARE() (RCC->CSR & RCC_CSR_SFTRSTF)
#endif
// ADC driver
void adcInit(void);
void adcRead(void);
inline uint16_t getAnalogValue(uint32_t value);
#define BATT_SCALE 150
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
// Power driver
void pwrInit(void);
uint32_t pwrCheck(void);
void pwrOn(void);
void pwrOff(void);
#if defined(REV9E)
uint32_t pwrPressed(void);
uint32_t pwrPressedDuration(void);
#endif
#define UNEXPECTED_SHUTDOWN() (g_eeGeneral.unexpectedShutdown)
// Backlight driver
void backlightInit(void);
#if defined(REVPLUS)
void turnBacklightOn(uint8_t level, uint8_t color);
void turnBacklightOff(void);
#define setBacklight(xx) turnBacklightOn(xx, g_eeGeneral.backlightColor)
#define backlightEnable() turnBacklightOn(g_eeGeneral.backlightBright, g_eeGeneral.backlightColor)
#define backlightDisable() turnBacklightOff()
#define isBacklightEnable() ((BACKLIGHT_TIMER->CCR4 != 0) || (BACKLIGHT_TIMER->CCR2 != 0))
#else
#define setBacklight(xx) BACKLIGHT_TIMER->CCR1 = 100-xx
#define backlightEnable() BACKLIGHT_TIMER->CCR1 = 100-g_eeGeneral.backlightBright
#define backlightDisable() BACKLIGHT_TIMER->CCR1 = 0
#define isBacklightEnable() (BACKLIGHT_TIMER->CCR1 != 0)
#endif
// USB driver
int usbPlugged(void);
void usbInit(void);
void usbStart(void);
#if defined(USB_JOYSTICK)
void usbStop(void);
#endif
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
// I2C driver: EEPROM + Audio Volume
void i2cInit(void);
void eepromReadBlock(uint8_t * buffer, uint16_t address, uint16_t size);
void eepromWriteBlock(uint8_t * buffer, uint16_t address, uint16_t size);
// Debug driver
void debugPutc(const char c);
// Telemetry driver
void telemetryPortInit(uint32_t baudrate);
void sportSendBuffer(uint8_t *buffer, uint32_t count);
// Audio driver
void audioInit(void) ;
void audioEnd(void) ;
void dacStart(void);
void dacStop(void);
void setSampleRate(uint32_t frequency);
extern const int8_t volumeScale[];
#define VOLUME_LEVEL_MAX 23
#define VOLUME_LEVEL_DEF 12
void setVolume(uint8_t volume);
// Haptic driver
void hapticInit(void);
void hapticOff(void);
#if defined(REVPLUS)
void hapticOn(uint32_t pwmPercent);
#else
void hapticOn(void);
#endif
// SERIAL_USART driver
#define DEBUG_BAUDRATE 115200
void uart3Init(unsigned int mode, unsigned int protocol);
void uart3Putc(const char c);
#define telemetrySecondPortInit(protocol) uart3Init(UART_MODE_TELEMETRY, protocol)
void uart3SbusInit(void);
void uart3Stop(void);
// BT driver
#define BLUETOOTH_DEFAULT_BAUDRATE 115200
#define BLUETOOTH_FACTORY_BAUDRATE 9600
uint8_t bluetoothReady(void);
void bluetoothInit(uint32_t baudrate);
void bluetoothWrite(const void * buffer, int len);
void bluetoothWriteString(const char * str);
int bluetoothRead(void * buffer, int len);
void bluetoothWakeup(void);
// LCD driver
void lcdInit(void);
void lcdOff(void);
// Top LCD driver
#if defined(REV9E)
void topLcdInit(void);
void topLcdOff(void);
void topLcdRefreshStart(void);
void topLcdRefreshEnd(void);
void setTopFirstTimer(int32_t value);
void setTopSecondTimer(uint32_t value);
void setTopRssi(uint32_t rssi);
void setTopBatteryState(uint32_t state);
void setTopBatteryValue(uint32_t volts);
#endif
#define USART_FLAG_ERRORS (USART_FLAG_ORE | USART_FLAG_NE | USART_FLAG_FE | USART_FLAG_PE)
#if defined(USB_JOYSTICK) && !defined(SIMU)
void usbJoystickUpdate(void);
#endif
void checkTrainerSettings(void);
#endif