1254 lines
67 KiB
C
1254 lines
67 KiB
C
/*
|
|
* Copyright (C) EdgeTX
|
|
*
|
|
* Based on code named
|
|
* opentx - https://github.com/opentx/opentx
|
|
* th9x - http://code.google.com/p/th9x
|
|
* er9x - http://code.google.com/p/er9x
|
|
* gruvin9x - http://code.google.com/p/gruvin9x
|
|
*
|
|
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
// DE translations author: Helmut Renz
|
|
// German checked 28.08.2019 r158 opentx V2.3.0 für X12S,X10,X9E,X9D+,X9D,QX7 X9Lite,XLite
|
|
|
|
/*
|
|
* Formatting octal codes available in TR_ strings:
|
|
* \037\x -sets LCD x-coord (x value in octal)
|
|
* \036 -newline
|
|
* \035 -horizontal tab (ARM only)
|
|
* \001 to \034 -extended spacing (value * FW/2)
|
|
* \0 -ends current string
|
|
*/
|
|
|
|
#define TR_MIN_PLURAL2 2
|
|
#define TR_MAX_PLURAL2 2
|
|
// For this number of minute in the last decimal place singular form is used in
|
|
// plural
|
|
#define TR_USE_SINGULAR_IN_PLURAL 1
|
|
#define TR_USE_PLURAL2_SPECIAL_CASE 0
|
|
// If the number of minutes is above this value PLURAL2 is used
|
|
#define TR_USE_PLURAL2 INT_MAX
|
|
|
|
#define TR_MINUTE_SINGULAR "minute"
|
|
#define TR_MINUTE_PLURAL1 "minuten"
|
|
#define TR_MINUTE_PLURAL2 "minuten"
|
|
|
|
// NON ZERO TERMINATED STRINGS
|
|
#define TR_OFFON "AUS","EIN"
|
|
#define TR_MMMINV "---","INV"
|
|
#define TR_VBEEPMODE "Stumm","Alarm","NoKey","Alle"
|
|
#define TR_VBLMODE "AUS","Taste","Stks","Beide","EIN"
|
|
#define TR_TRNMODE "AUS",TR("+=","Addiere"),TR(":=","Ersetze")
|
|
#define TR_TRNCHN "CH1","CH2","CH3","CH4"
|
|
#define TR_AUX_SERIAL_MODES "AUS","Telem weiterl.","Telemetrie In","SBUS Eingang","LUA","CLI","GPS","Debug","SpaceMouse","Externes Modul"
|
|
#define TR_SWTYPES "Kein","Taster","2POS","3POS"
|
|
#define TR_POTTYPES "Kein","Poti", TR("Pot o. Ras","Poti mit Raste"),"Schieber",TR("Multipos.","Multipos. Schalter"),"Knüppel X","Knüppel Y","Schalter"
|
|
#define TR_VPERSISTENT "AUS","Flugzeit","Manuell Rück"
|
|
#define TR_COUNTRY_CODES TR("US","Amerika"),TR("JP","Japan"),TR("EU","Europa")
|
|
#define TR_USBMODES "Fragen",TR("Joyst","Joystick"),TR("SDCard","Speicher"),TR("Serial","Seriell")
|
|
#define TR_JACK_MODES "Popup","Audio","Trainer"
|
|
|
|
#define TR_SBUS_INVERSION_VALUES "normal","nicht inv."
|
|
#define TR_MULTI_CUSTOM "Benutzer"
|
|
#define TR_VTRIMINC TR("Expo","Exponentiell"),TR("ExFein","Extrafein"),"Fein","Mittel","Grob"
|
|
#define TR_VDISPLAYTRIMS "Nein","Kurz","Ja" // Trimmwerte Keine, kurze Anzeigen, Ja
|
|
#define TR_VBEEPCOUNTDOWN "Kein", "Pieps", "Stimme", "Haptik", TR("P & H","Pieps & Haptik"), TR("St & H","Stimme & Haptik")
|
|
#define TR_COUNTDOWNVALUES "5s","10s","20s","30s"
|
|
#define TR_VVARIOCENTER "Ton","Ruhe"
|
|
#define TR_CURVE_TYPES "Nur Y","X und Y" // "Standard","Custom"
|
|
|
|
#define TR_ADCFILTERVALUES "Global","Aus","Ein"
|
|
|
|
#define TR_VCURVETYPE "Diff","Expo","Funk","Ind."
|
|
#define TR_VCURVEFUNC "---","x>0","x<0","|x|","f>0","f<0","|f|"
|
|
#define TR_VMLTPX "Addiere","Multipl.","Ersetze"
|
|
#define TR_VMLTPX2 "+=","*=",":="
|
|
|
|
#if LCD_W >= 212
|
|
#define TR_CSWTIMER "Takt" // TIM = Takt = Taktgenerator
|
|
#define TR_CSWSTICKY "SRFF" // Sticky = RS-Flip-Flop
|
|
#define TR_CSWSTAY "Puls" // Edge = einstellbarer Impuls
|
|
#else
|
|
#define TR_CSWTIMER "Takt" // TIM = Takt = Taktgenerator
|
|
#define TR_CSWSTICKY "SRFF" // Sticky = RS-Flip-Flop
|
|
#define TR_CSWSTAY "Puls" // Edge = einstellbarer Impuls
|
|
#endif
|
|
|
|
#define TR_CSWEQUAL "a=x"
|
|
#define TR_VCSWFUNC "---",TR_CSWEQUAL,"a" STR_CHAR_TILDE "x","a>x","a<x","|a|>x","|a|<x","AND","OR","XOR",TR_CSWSTAY,"a=b","a>b","a<b",STR_CHAR_DELTA "≥x","|" STR_CHAR_DELTA "|≥x",TR_CSWTIMER,TR_CSWSTICKY
|
|
|
|
#define TR_SF_TRAINER "Lehrer"
|
|
#define TR_SF_INST_TRIM "Inst. Trim"
|
|
#define TR_SF_RESET "Rücksetz."
|
|
#define TR_SF_SET_TIMER "Setze"
|
|
#define TR_SF_VOLUME "Lautstr."
|
|
#define TR_SF_FAILSAFE "SetFailsafe"
|
|
#define TR_SF_RANGE_CHECK "RangeCheck"
|
|
#define TR_SF_MOD_BIND "ModuleBind"
|
|
#define TR_SF_RGBLEDS "RGB LED"
|
|
|
|
#define TR_SOUND "Spiel Töne"
|
|
#define TR_PLAY_TRACK TR("Ply Trk", "Sag Text")
|
|
#define TR_PLAY_VALUE "Sag Wert"
|
|
#define TR_SF_HAPTIC "Haptik"
|
|
#define TR_SF_PLAY_SCRIPT TR("Lua", "Lua Skript")
|
|
#define TR_SF_BG_MUSIC "StartMusik"
|
|
#define TR_SF_BG_MUSIC_PAUSE "Stop Musik"
|
|
#define TR_SF_LOGS "SD-Aufz."
|
|
#define TR_ADJUST_GVAR "Ändere"
|
|
#define TR_SF_BACKLIGHT "LCD Licht"
|
|
#define TR_SF_VARIO "Vario"
|
|
#define TR_SF_TEST "Test"
|
|
#define TR_SF_SAFETY TR("Übersch.", "Überschreibe")
|
|
|
|
#define TR_SF_SCREENSHOT "Screenshot"
|
|
#define TR_SF_RACING_MODE "RacingMode"
|
|
#define TR_SF_DISABLE_TOUCH "Kein Touch"
|
|
#define TR_SF_DISABLE_AUDIO_AMP "Audio Verst. Aus"
|
|
#define TR_SF_SET_SCREEN "Set Main Screen"
|
|
#define TR_SF_SET_TELEMSCREEN "TelSeite anz"
|
|
#define TR_SF_PUSH_CUST_SWITCH "Push CS"
|
|
#define TR_SF_LCD_TO_VIDEO "LCD to Video"
|
|
|
|
#define TR_FSW_RESET_TELEM TR("Telm","Telemetrie")
|
|
#define TR_FSW_RESET_TRIMS "Trims"
|
|
#define TR_FSW_RESET_TIMERS "Tmr1","Tmr2","Tmr3"
|
|
|
|
|
|
#define TR_VFSWRESET TR_FSW_RESET_TIMERS,"All",TR_FSW_RESET_TELEM,TR_FSW_RESET_TRIMS
|
|
|
|
#define TR_FUNCSOUNDS TR("Bp1","Piep1"),TR("Bp2","Piep2"),TR("Bp3","Piep3"),TR("Wrn1","Warn1"),TR("Wrn2","Warn2"),TR("Chee","Cheep"),TR("Rata","Ratata"),"Tick",TR("Sirn","Siren"),"Ring",TR("SciF","SciFi"),TR("Robt","Robot"),TR("Chrp","Chirp"),"Tada",TR("Crck","Crickt"),TR("Alrm","AlmClk")
|
|
|
|
#define LENGTH_UNIT_IMP "ft"
|
|
#define SPEED_UNIT_IMP "mph"
|
|
#define LENGTH_UNIT_METR "m"
|
|
#define SPEED_UNIT_METR "kmh"
|
|
#define TR_VUNITSSYSTEM TR("Metrik","Metrisch"),TR("Imper.","Imperial")
|
|
#define TR_VTELEMUNIT "-","V","A","mA","kts","m/s","f/s","kmh","mph","m","ft","°C","°F","%","mAh","W","mW","dB","rpm","g","°","rad","ml","fOz","mlm","Hz","ms","us","km","dBm"
|
|
|
|
#define STR_V (STR_VTELEMUNIT[1])
|
|
#define STR_A (STR_VTELEMUNIT[2])
|
|
|
|
#define TR_VTELEMSCREENTYPE "None","Werte","Balken","Script"
|
|
#define TR_GPSFORMAT "GMS","NMEA" // Koordinatenanzeige
|
|
|
|
#define TR_VSWASHTYPE "---","120","120X","140","90"
|
|
|
|
#define TR_STICK_NAMES0 "Sei"
|
|
#define TR_STICK_NAMES1 "Höh"
|
|
#define TR_STICK_NAMES2 "Gas"
|
|
#define TR_STICK_NAMES3 "Que"
|
|
#define TR_SURFACE_NAMES0 "Str"
|
|
#define TR_SURFACE_NAMES1 "Gas"
|
|
|
|
#if defined(PCBNV14)
|
|
#define TR_RFPOWER_AFHDS2 "Default","High"
|
|
#endif
|
|
|
|
#define TR_ROTARY_ENCODERS
|
|
#define TR_ROTENC_SWITCHES
|
|
|
|
#define TR_ON_ONE_SWITCHES "ON","One"
|
|
|
|
#if defined(USE_HATS_AS_KEYS)
|
|
#define TR_HATSMODE "Joystick Modus"
|
|
#define TR_HATSOPT "nur Trimmer","nur Tasten","Umschaltbar","Global"
|
|
#define TR_HATSMODE_TRIMS "Joystick Modus: Trimmer"
|
|
#define TR_HATSMODE_KEYS "Joystick Modus: Tasten"
|
|
#define TR_HATSMODE_KEYS_HELP "Linke Seite:\n"\
|
|
" Rechts = MDL\n"\
|
|
" Oben = SYS\n"\
|
|
" Unten = TELE\n"\
|
|
"\n"\
|
|
"Rechte Seite:\n"\
|
|
" Links = PAGE<\n"\
|
|
" Rechts = PAGE>\n"\
|
|
" Oben = PREV/INC\n"\
|
|
" Unten = NEXT/DEC"
|
|
#endif
|
|
|
|
#if defined(COLORLCD)
|
|
#define TR_ROTARY_ENC_OPT "Normal","Inverted"
|
|
#else
|
|
#define TR_ROTARY_ENC_OPT "Normal","Inverted","V-I H-N","V-I H-A","V-N E-I"
|
|
#endif
|
|
|
|
#if defined(IMU)
|
|
#define TR_IMU_VSRCRAW "TltX","TltY",
|
|
#else
|
|
#define TR_IMU_VSRCRAW
|
|
#endif
|
|
|
|
#if defined(HELI)
|
|
#define TR_CYC_VSRCRAW "CYC1","CYC2","CYC3"
|
|
#else
|
|
#define TR_CYC_VSRCRAW "[C1]","[C2]","[C3]"
|
|
#endif
|
|
|
|
|
|
#define TR_SRC_BATT "Batt"
|
|
#define TR_SRC_TIME "Time"
|
|
#define TR_SRC_GPS "GPS"
|
|
#define TR_SRC_TIMER "Tmr"
|
|
|
|
#define TR_VTMRMODES "AUS","EIN","Strt","GSs","GS%","GSt"
|
|
#define TR_VTRAINER_MASTER_OFF "AUS"
|
|
#define TR_VTRAINER_MASTER_JACK "Lehrer/Buchse"
|
|
#define TR_VTRAINER_SLAVE_JACK "Schüler/Buchse"
|
|
#define TR_VTRAINER_MASTER_SBUS_MODULE "Lehrer/SBUS Modul"
|
|
#define TR_VTRAINER_MASTER_CPPM_MODULE "Lehrer/CPPM Modul"
|
|
#define TR_VTRAINER_MASTER_BATTERY "Lehrer/Serial"
|
|
#define TR_VTRAINER_BLUETOOTH TR("Lehrer/BT","Lehrer/Bluetooth"),TR("Schüler/BT","Schüler/Bluetooth")
|
|
#define TR_VTRAINER_MULTI "Lehrer/Multi"
|
|
#define TR_VTRAINER_CRSF "Lehrer/CRSF"
|
|
#define TR_VFAILSAFE "Kein Failsafe","Halte Pos.","Kanäle","Kein Signal","Empfänger"
|
|
#define TR_VSENSORTYPES "Sensor","Berechnung"
|
|
#define TR_VFORMULAS "Addieren","Mittelwert","Min","Max","Multiplizier","Gesamt","Zelle","Verbrauch","Distanz"
|
|
#define TR_VPREC "0.--","0.0","0.00"
|
|
#define TR_VCELLINDEX "Niedrigst","1. Zelle","2. Zelle","3. Zelle","4. Zelle","5. Zelle","6. Zelle","7. Zelle","8. Zelle","Höchster","Differenz"
|
|
#define TR_SUBTRIMMODES STR_CHAR_DELTA" (center only)","= (symetrical)"
|
|
#define TR_TIMER_DIR TR("Rückw.", "Rückwärts"), TR("Vorwä.", "Vorwärts")
|
|
#define TR_PPMUNIT "0.--","0.0","us"
|
|
|
|
// ZERO TERMINATED STRINGS
|
|
|
|
#if defined(COLORLCD)
|
|
#if defined(BOLD)
|
|
#define TR_FONT_SIZES "STD"
|
|
#else
|
|
#define TR_FONT_SIZES "STD","FETT","XXS","XS","L","XL","XXL"
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(PCBFRSKY)
|
|
#define TR_ENTER "[ENTER]"
|
|
#elif defined(PCBNV14) || defined(PCBPL18)
|
|
#define TR_ENTER "[NEXT]"
|
|
#else
|
|
#define TR_ENTER "[MENU]"
|
|
#endif
|
|
|
|
#if defined(PCBHORUS)
|
|
#define TR_EXIT "RTN"
|
|
#define TR_OK TR_ENTER
|
|
#else
|
|
#define TR_EXIT "EXIT"
|
|
#define TR_OK "\010" "\010" "\010" TR("[OK]", "\010" "\010" "[OK]")
|
|
#endif
|
|
|
|
#if defined(PCBTARANIS)
|
|
#define TR_POPUPS_ENTER_EXIT TR(TR_EXIT "\010" TR_ENTER, TR_EXIT "\010" "\010" "\010" "\010" TR_ENTER)
|
|
|
|
#else
|
|
#define TR_POPUPS_ENTER_EXIT TR_ENTER "\010" TR_EXIT
|
|
#endif
|
|
|
|
#define TR_FREE "frei"
|
|
#define TR_YES "Ja"
|
|
#define TR_NO "Nein"
|
|
#define TR_DELETEMODEL "Modell löschen?"
|
|
#define TR_COPYINGMODEL "Kopiere Modell"
|
|
#define TR_MOVINGMODEL "Schiebe Modell"
|
|
#define TR_LOADINGMODEL "Lade Modell..."
|
|
#define TR_UNLABELEDMODEL "Unlabeled"
|
|
#define TR_NAME "Name"
|
|
#define TR_MODELNAME "Modellname"
|
|
#define TR_PHASENAME "Phase-Name"
|
|
#define TR_MIXNAME "Mix-Name"
|
|
#define TR_INPUTNAME TR("Input", "Inputname")
|
|
#define TR_EXPONAME TR("Name", "Zeilenname")
|
|
#define TR_BITMAP "Modellfoto"
|
|
#define TR_NO_PICTURE "kein Foto"
|
|
#define TR_TIMER "Timer"
|
|
#define TR_START "Start"
|
|
#define TR_ELIMITS TR("Erw. Limit", "Erw. Wege auf 150%")
|
|
#define TR_ETRIMS TR("Erw. Trims", "Erw. Trim auf 100%")
|
|
#define TR_TRIMINC TR("Trimschritt", "Trimmschritte")
|
|
#define TR_DISPLAY_TRIMS TR("Trimmanzeige", "Trimmwerte anzeigen")
|
|
#define TR_TTRACE TR("Gasquelle", "Gas-Timerquelle")
|
|
#define TR_TTRIM TR("Gastrim", "Gas-Leerlauftrim")
|
|
#define TR_TTRIM_SW TR("T-Trim-Sw", "Trim switch")
|
|
#define TR_BEEPCTR TR("MittePieps", "Pieps in Mittelstellung")
|
|
#define TR_USE_GLOBAL_FUNCS TR("Glob. Funkt.", "Globale Funkt verw.")
|
|
#define TR_PROTOCOL TR("Protok.", "Protokoll")
|
|
#define TR_PPMFRAME "PPM-Frame"
|
|
#define TR_REFRESHRATE TR("Refresh", "Refresh Rate")
|
|
#define STR_WARN_BATTVOLTAGE TR("Ausg. ist VBAT: ", "Warnung: Ausg.pegel ist VBAT: ")
|
|
#define TR_WARN_5VOLTS "Warnung: Ausgangspegel ist 5 Volt"
|
|
#define TR_MS "ms"
|
|
#define TR_SWITCH TR("Schalt.", "Schalter")
|
|
#define TR_FUNCTION_SWITCHES "Anpassbare Schalter"
|
|
#define TR_FS_COLOR_LIST "Custom","Off","White","Red","Green","Yellow","Orange","Blue","Pink"
|
|
#define TR_GROUP "Group"
|
|
#define TR_GROUP_ALWAYS_ON "Always on"
|
|
#define TR_FS_ON_COLOR TR("ON:","ON Color")
|
|
#define TR_FS_OFF_COLOR TR("OFF:","OFF Color")
|
|
#define TR_GROUPS "Always on groups"
|
|
#define TR_LAST "Last"
|
|
#define TR_MORE_INFO "More info"
|
|
#define TR_SWITCH_TYPE "Type"
|
|
#define TR_SWITCH_STARTUP "Startup"
|
|
#define TR_SWITCH_GROUP "Group"
|
|
#define TR_FUNCTION_SWITCH_GROUPS "---", TR_SWITCH_GROUP" 1", TR_SWITCH_GROUP" 2", TR_SWITCH_GROUP" 3"
|
|
#define TR_SF_SWITCH "Trigger"
|
|
#define TR_TRIMS "Trimmer"
|
|
#define TR_FADEIN "Langs. Ein"
|
|
#define TR_FADEOUT "Langs. Aus"
|
|
#define TR_DEFAULT "(Normal)"
|
|
#if defined(COLORLCD)
|
|
#define TR_CHECKTRIMS "Prüfe Flugphasen-Trimmung"
|
|
#else
|
|
#define TR_CHECKTRIMS "\006Prüfe\012Trimmung"
|
|
#endif
|
|
#define TR_SWASHTYPE TR("Typ Taumelsch", "Typ Taumelscheibe")
|
|
#define TR_COLLECTIVE TR("Kollekt. Pitch", "Kollekt. Pitch Quelle")
|
|
#define TR_AILERON "Roll Quelle"
|
|
#define TR_ELEVATOR "Nick Quelle"
|
|
#define TR_SWASHRING TR("Ring Begrenz", "Ring Begrenzung")
|
|
#define TR_MODE "Modus"
|
|
#if !NARROW_LAYOUT
|
|
#define TR_LEFT_STICK "Links"
|
|
#else
|
|
#define TR_LEFT_STICK "Li"
|
|
#endif
|
|
#define TR_SUBTYPE "Subtype"
|
|
#define TR_NOFREEEXPO "Expos voll!"
|
|
#define TR_NOFREEMIXER "Mischer voll!"
|
|
#define TR_SOURCE "Quelle"
|
|
#define TR_WEIGHT "Gewicht"
|
|
#define TR_SIDE "Seite"
|
|
#define TR_OFFSET "Offset"
|
|
#define TR_TRIM "Trim"
|
|
#define TR_DREX "DRex"
|
|
#define DREX_CHBOX_OFFSET 30
|
|
#define TR_CURVE "Kurve"
|
|
#define TR_FLMODE TR("Phase", "Phasen")
|
|
#define TR_MIXWARNING "Warnung"
|
|
#define TR_OFF "AUS"
|
|
#define TR_ANTENNA "Antenne"
|
|
#define TR_NO_INFORMATION TR("No info", "No information")
|
|
#define TR_MULTPX "Wirkung"
|
|
#define TR_DELAYDOWN "Verz. Dn"
|
|
#define TR_DELAYUP "Verz. Up"
|
|
#define TR_SLOWDOWN "Langs.Dn"
|
|
#define TR_SLOWUP "Langs.Up"
|
|
#define TR_MIXES "MISCHER"
|
|
#define TR_CV "KV"
|
|
#if defined(PCBNV14) || defined(PCBPL18)
|
|
#define TR_GV "GV"
|
|
#else
|
|
#define TR_GV TR("G", "GV")
|
|
#endif
|
|
#define TR_RANGE TR("Bereich", "Variobereich m/s")
|
|
#define TR_CENTER TR("Mitte", "Variomitte m/s")
|
|
#define TR_ALARM "Alarme"
|
|
#define TR_BLADES TR("Prop", "Prop-Blätter")
|
|
#define TR_SCREEN "Seite: "
|
|
#define TR_SOUND_LABEL "Töne"
|
|
#define TR_LENGTH "Dauer"
|
|
#define TR_BEEP_LENGTH "Beep-Länge"
|
|
#define TR_BEEP_PITCH "Beep-Freq +/-"
|
|
#define TR_HAPTIC_LABEL "Haptik"
|
|
#define TR_STRENGTH "Stärke"
|
|
#define TR_IMU_LABEL "IMU"
|
|
#define TR_IMU_OFFSET "Offset"
|
|
#define TR_IMU_MAX "Max"
|
|
#define TR_CONTRAST "LCD-Kontrast"
|
|
#define TR_ALARMS_LABEL "Alarme"
|
|
#define TR_BATTERY_RANGE TR("Akku Bereich", "Akku Spann. Bereich") // Symbol Akku Ladezustand
|
|
#define TR_BATTERYCHARGING "Lädt..."
|
|
#define TR_BATTERYFULL "Akku voll"
|
|
#define TR_BATTERYNONE "None!"
|
|
#define TR_BATTERYWARNING TR("Akku Warnung", "Akkuspannungswarnung")
|
|
#define TR_INACTIVITYALARM TR("Inaktivität", "Inaktivität nach")
|
|
#define TR_MEMORYWARNING "Speicher voll"
|
|
#define TR_ALARMWARNING TR("Alle Töne aus?", "Alle Töne ganz aus?")
|
|
#define TR_RSSI_SHUTDOWN_ALARM TR("RSSI b. Aussch.", "Prüfe RSSI bei Ausschalten")
|
|
#define TR_FLYSKY_TELEMETRY TR("FlySky RSSI #", "Use FlySky RSSI value without rescalling")
|
|
#define TR_TRAINER_SHUTDOWN_ALARM TR("Trainer b. Aussch.", "Prüfe Trainer bei Ausschalten")
|
|
#define TR_MODEL_STILL_POWERED "Modell noch aktiv!"
|
|
#define TR_TRAINER_STILL_CONNECTED "Schüler noch verbunden"
|
|
#define TR_USB_STILL_CONNECTED "USB noch verbunden"
|
|
#define TR_MODEL_SHUTDOWN "Herunterfahren?"
|
|
#define TR_PRESS_ENTER_TO_CONFIRM "Drücke [ENTER] zum Bestätigen"
|
|
#define TR_THROTTLE_LABEL "Gas-Kontrolle"
|
|
#define TR_THROTTLE_START "Gas Start"
|
|
#define TR_THROTTLEREVERSE TR("Gas invers", "Vollgas hinten?") //Änderung wg TH9x, Taranis
|
|
#define TR_MINUTEBEEP TR("Min-Alarm", "Minuten-Alarm")
|
|
#define TR_BEEPCOUNTDOWN "Countdown"
|
|
#define TR_PERSISTENT TR("Permanent", "Permanent")
|
|
#define TR_BACKLIGHT_LABEL "Bildschirm"
|
|
#define TR_GHOST_MENU_LABEL "GHOST MENU"
|
|
#define TR_STATUS "Status"
|
|
#define TR_BLONBRIGHTNESS "An-Helligkeit"
|
|
#define TR_BLOFFBRIGHTNESS "Aus-Helligkeit"
|
|
#define TR_KEYS_BACKLIGHT "Keys backlight"
|
|
#define TR_BLCOLOR "Farbe"
|
|
#define TR_SPLASHSCREEN TR("Startbild Ein", "Startbild Anzeigedauer")
|
|
#define TR_PLAY_HELLO "Startton abspielen"
|
|
#define TR_PWR_ON_DELAY "PWR EIN Verzög."
|
|
#define TR_PWR_OFF_DELAY "PWR AUS Verzög."
|
|
#define TR_PWR_AUTO_OFF TR("Pwr Auto Off","Power Auto Off")
|
|
#define TR_PWR_ON_OFF_HAPTIC TR("Pwr AN/AUS Haptik","Power AN/AUS Haptik")
|
|
#define TR_THROTTLE_WARNING TR("Gasalarm", "Gas Alarm")
|
|
#define TR_CUSTOM_THROTTLE_WARNING TR("Cust-Pos", "Custom position?")
|
|
#define TR_CUSTOM_THROTTLE_WARNING_VAL TR("Pos. %", "Position %")
|
|
#define TR_SWITCHWARNING TR("Sch. Alarm", "Schalter-Alarm")
|
|
#define TR_POTWARNINGSTATE "Pots & sliders"
|
|
#define TR_POTWARNING TR("Potiwarnung", "Poti-Warnung")
|
|
#define TR_TIMEZONE TR("Zeitzone", "GPS-Zeitzone +/-Std")
|
|
#define TR_ADJUST_RTC TR("GPSzeit setzen", "Uhrzeit per GPS setzen")
|
|
#define TR_GPS "GPS"
|
|
#define TR_DEF_CHAN_ORD TR("Std.Kanal Folge", "Std. Kanal Reihenfolge")
|
|
#define TR_STICKS "Knüppel"
|
|
#define TR_POTS "Potis"
|
|
#define TR_SWITCHES "Schalter"
|
|
#define TR_SWITCHES_DELAY TR("Sw. Mitte Delay", "Schaltermitte Verzögerung") //Schalter Mitten verzögern Anpassung
|
|
#define TR_SLAVE TR("Schüler PPM1-16", "Schüler PPM1-16 als Ausgang")
|
|
#define TR_MODESRC " Modus\003% Quelle"
|
|
#define TR_MULTIPLIER "Multiplik."
|
|
#define TR_CAL "Kal."
|
|
#define TR_VTRIM "Trim - +"
|
|
#define TR_CALIB_DONE "Kalibrierung fertig"
|
|
#if defined(PCBHORUS)
|
|
#define TR_MENUTOSTART "Drücke [Enter] zum Start"
|
|
#define TR_SETMIDPOINT "Knüppel/Schieber zentrieren und [Enter]"
|
|
#define TR_MOVESTICKSPOTS "Bewege Knüppel/Poti/Schieber und drücke [Enter]"
|
|
#elif defined(COLORLCD)
|
|
#define TR_MENUTOSTART TR_ENTER " Zum Start"
|
|
#define TR_SETMIDPOINT "Knüppel/Schieber zentrieren"
|
|
#define TR_MOVESTICKSPOTS "Knüppel/Schieber bewegen"
|
|
#define TR_MENUWHENDONE TR_ENTER " wenn fertig"
|
|
#else
|
|
#define TR_MENUTOSTART TR_ENTER " Zum START"
|
|
#if defined(SURFACE_RADIO)
|
|
#define TR_SETMIDPOINT "SCHIEBER AUF MITTE"
|
|
#define TR_MOVESTICKSPOTS "BEWEGE LENK/GAS/POTI/KNÜPPEL"
|
|
#else
|
|
#define TR_SETMIDPOINT TR("KNÜPPEL AUF MITTE", "ZENTRIERE KNÜPPEL/SCHIEBER")
|
|
#define TR_MOVESTICKSPOTS "BEWEGE KNÜPPEL/SCHIEBER"
|
|
#endif
|
|
#define TR_MENUWHENDONE TR_ENTER " wenn fertig"
|
|
#endif
|
|
#define TR_TXnRX "Tx:\0Rx:"
|
|
#define OFS_RX 4
|
|
#define TR_NODATA "Keine Daten"
|
|
#define TR_US "us"
|
|
#define TR_HZ "Hz"
|
|
#define TR_TMIXMAXMS "Tmix max"
|
|
#define TR_FREE_STACK "Freier Stack"
|
|
#define TR_INT_GPS_LABEL "Internal GPS"
|
|
#define TR_HEARTBEAT_LABEL "Heartbeat"
|
|
#define TR_LUA_SCRIPTS_LABEL "Lua scripts"
|
|
#define TR_FREE_MEM_LABEL "Free mem"
|
|
#define TR_DURATION_MS TR("[D]","Dauer(ms): ")
|
|
#define TR_INTERVAL_MS TR("[I]","Intervall(ms): ")
|
|
#define TR_MEM_USED_SCRIPT "Script(B): "
|
|
#define TR_MEM_USED_WIDGET "Widget(B): "
|
|
#define TR_MEM_USED_EXTRA "Extra(B): "
|
|
#define TR_STACK_MIX "Mix: "
|
|
#define TR_STACK_AUDIO "Audio: "
|
|
#define TR_GPS_FIX_YES "Fix: Yes"
|
|
#define TR_GPS_FIX_NO "Fix: No"
|
|
#define TR_GPS_SATS "Sats: "
|
|
#define TR_GPS_HDOP "Hdop: "
|
|
#define TR_STACK_MENU "Menü: "
|
|
#define TR_TIMER_LABEL "Timer"
|
|
#define TR_THROTTLE_PERCENT_LABEL "Gas %"
|
|
#define TR_BATT_LABEL "Battery"
|
|
#define TR_SESSION "Session"
|
|
#define TR_MENUTORESET TR_ENTER " für Reset"
|
|
#define TR_PPM_TRAINER "TR"
|
|
#define TR_CH "CH"
|
|
#define TR_MODEL "MODELL"
|
|
#if defined(SURFACE_RADIO)
|
|
#define TR_FM "DM"
|
|
#else
|
|
#define TR_FM "FP"
|
|
#endif
|
|
#define TR_EEPROMLOWMEM "EEPROM voll"
|
|
#define TR_THROTTLE_NOT_IDLE "Gas nicht Null!"
|
|
#define TR_ALARMSDISABLED "Alarme ausgeschaltet"
|
|
#define TR_PRESS_ANY_KEY_TO_SKIP "Taste drücken"
|
|
#define TR_PRESSANYKEY "Taste drücken"
|
|
#define TR_BADEEPROMDATA "EEPROM ungültig"
|
|
#define TR_BAD_RADIO_DATA "Fehlende oder fehlerhafte Daten"
|
|
#define TR_RADIO_DATA_RECOVERED TR3("Using backup radio data","Using backup radio settings","Radio settings recovered from backup")
|
|
#define TR_RADIO_DATA_UNRECOVERABLE TR3("Radio settings invalid","Radio settings not valid", "Unable to read valid radio settings")
|
|
#define TR_EEPROMFORMATTING "EEPROM Initialisieren"
|
|
#define TR_STORAGE_FORMAT "Speicher Vorbereiten"
|
|
#define TR_EEPROMOVERFLOW "EEPROM Überlauf"
|
|
#define TR_RADIO_SETUP TR("SENDER-EINSTELLEN", "SENDER-GRUNDEINSTELLUNGEN")
|
|
#define TR_MENUTRAINER TR("LEHRER/SCHÜLER", "LEHRER/SCHÜLER")
|
|
#define TR_MENUSPECIALFUNCS "GLOBALE FUNKTIONEN"
|
|
#define TR_MENUVERSION "VERSION"
|
|
#define TR_MENU_RADIO_SWITCHES TR("Schalter-Test", "Schalter-Test")
|
|
#define TR_MENU_RADIO_ANALOGS "Geber-Test"
|
|
#define TR_MENU_RADIO_ANALOGS_CALIB "CALIBRATED ANALOGS"
|
|
#define TR_MENU_RADIO_ANALOGS_RAWLOWFPS "RAW ANALOGS (5 Hz)"
|
|
#define TR_MENUCALIBRATION TR("KALIB. ANALOG", "KALIBRIERUNG-Analog")
|
|
#define TR_MENU_FSWITCH "ANPASSBARE SCHALTER"
|
|
#if defined(COLORLCD)
|
|
#define TR_TRIMS2OFFSETS "Trims => Subtrims"
|
|
#else
|
|
#define TR_TRIMS2OFFSETS "\006Trims => Subtrims"
|
|
#endif
|
|
#define TR_CHANNELS2FAILSAFE "Channels=>Failsafe"
|
|
#define TR_CHANNEL2FAILSAFE "Channel=>Failsafe"
|
|
#define TR_MENUMODELSEL TR("MODELLE", "MODELL WÄHLEN")
|
|
#define TR_MENU_MODEL_SETUP TR("MODELL-EINSTELLUNG", "MODELL-EINSTELLUNGEN")
|
|
#if defined(SURFACE_RADIO)
|
|
#define TR_MENUFLIGHTMODES "FAHRMODI"
|
|
#define TR_MENUFLIGHTMODE "FAHRMODUS"
|
|
#else
|
|
#define TR_MENUFLIGHTMODE "FLUGPHASE"
|
|
#define TR_MENUFLIGHTMODES "FLUGPHASEN"
|
|
#endif
|
|
#define TR_MENUHELISETUP TR("HELI TS-Mischer", "HELI TS-Mischer CYC1-3")
|
|
#define TR_MENUINPUTS "INPUTS" //"Inputs=Geber"
|
|
#define TR_MENULIMITS "SERVOS" //"AUSGABEN" oder "Servos"
|
|
#define TR_MENUCURVES "KURVEN"
|
|
#define TR_MENUCURVE "KURVE"
|
|
#define TR_MENULOGICALSWITCH "LOGIKSCHALTER"
|
|
#define TR_MENULOGICALSWITCHES "LOGIKSCHALTER"
|
|
#define TR_MENUCUSTOMFUNC TR("SPEZ.-FUNKTIONEN", "SPEZIAL-FUNKTIONEN")
|
|
#define TR_MENUCUSTOMSCRIPTS "LUA-SCRIPTE"
|
|
#define TR_MENUTELEMETRY "TELEMETRIE"
|
|
#define TR_MENUSTAT "STAT"
|
|
#define TR_MENUDEBUG "DEBUG"
|
|
#define TR_MONITOR_CHANNELS1 "KANAL+MISCHER MONITOR 1-8"
|
|
#define TR_MONITOR_CHANNELS2 "KANAL+MISCHER MONITOR 9-16"
|
|
#define TR_MONITOR_CHANNELS3 "KANAL+MISCHER MONITOR 17-24"
|
|
#define TR_MONITOR_CHANNELS4 "KANAL+MISCHER MONITOR 25-32"
|
|
#define TR_MONITOR_SWITCHES "LOGIK SCHALTER MONITOR"
|
|
#define TR_MONITOR_OUTPUT_DESC "Kanäle"
|
|
#define TR_MONITOR_MIXER_DESC "Mischer"
|
|
#define TR_RECEIVER_NUM TR("Empf Nr.", "Empfänger Nummer")
|
|
#define TR_RECEIVER "Empfänger"
|
|
#define TR_MULTI_RFTUNE TR("RF Freq.", "RF Freq. Feintuning")
|
|
#define TR_MULTI_RFPOWER "RF power"
|
|
#define TR_MULTI_WBUS "Output"
|
|
#define TR_MULTI_TELEMETRY "Telemetry"
|
|
#define TR_MULTI_VIDFREQ TR("Vid. Freq.", "Video Frequenz")
|
|
#define TR_RF_POWER "RF Power"
|
|
#define TR_MULTI_FIXEDID TR("FesteID", "Feste ID")
|
|
#define TR_MULTI_OPTION TR("Option", "Optionswert")
|
|
#define TR_MULTI_AUTOBIND TR("Bind Ka.","Bindung an Kanal")
|
|
#define TR_DISABLE_CH_MAP TR("No Ch. map", "Deaktiviere Ch. map")
|
|
#define TR_DISABLE_TELEM TR("No Telem", "Deaktiviere Telem.")
|
|
#define TR_MULTI_LOWPOWER TR("Low power", "reduzierte Leistung")
|
|
#define TR_MULTI_LNA_DISABLE "LNA disable"
|
|
#define TR_MODULE_TELEMETRY TR("S.Port", "S.Port link")
|
|
#define TR_MODULE_TELEM_ON TR("EIN", "Aktiviert")
|
|
#define TR_DISABLE_INTERNAL TR("Deaktiv. int. RF", "Deaktiviere int. RF")
|
|
#define TR_MODULE_NO_SERIAL_MODE TR("!serial mode", "Not in serial mode")
|
|
#define TR_MODULE_NO_INPUT TR("No input", "No serial input")
|
|
#define TR_MODULE_NO_TELEMETRY TR3("Keine Telem.", "Keine MULTI_TELEMETRIE", "Keine Telemetrie (aktiviere MULTI_TELEMETRIE)")
|
|
#define TR_MODULE_WAITFORBIND "Warten auf Bindung"
|
|
#define TR_MODULE_BINDING "Binde"
|
|
#define TR_MODULE_UPGRADE_ALERT TR3("Upg. nötig", "Modul Upgrade nötig", "Modul\nUpgrade nötig")
|
|
#define TR_MODULE_UPGRADE TR("Upg. empf.", "Modul Upgrade empf.")
|
|
#define TR_REBIND "Neu binden nötig"
|
|
#define TR_REG_OK "Registration ok"
|
|
#define TR_BIND_OK "Binden erfolgreich"
|
|
#define TR_BINDING_CH1_8_TELEM_ON "Ch1-8 Telem AN"
|
|
#define TR_BINDING_CH1_8_TELEM_OFF "Ch1-8 Telem AUS"
|
|
#define TR_BINDING_CH9_16_TELEM_ON "Ch9-16 Telem AN"
|
|
#define TR_BINDING_CH9_16_TELEM_OFF "Ch9-16 Telem AUS"
|
|
#define TR_PROTOCOL_INVALID TR("Prot. invalid", "Protokoll ungültig")
|
|
#define TR_MODULE_STATUS TR("Status", "Modul Status")
|
|
#define TR_MODULE_SYNC TR("Sync", "Proto Sync Status")
|
|
#define TR_MULTI_SERVOFREQ TR("Servo Rate", "Servo Update Rate")
|
|
#define TR_MULTI_MAX_THROW TR("Max. Weg", "Aktiviere Max. Weg")
|
|
#define TR_MULTI_RFCHAN TR("RF Channel", "Wähle RF Kanal")
|
|
#define TR_GPS_COORDS_FORMAT TR("GPS-Koord.", "GPS-Koordinaten-Format")
|
|
#define TR_VARIO "Variometer"
|
|
#define TR_PITCH_AT_ZERO "Töne sinken"
|
|
#define TR_PITCH_AT_MAX "Töne steigen"
|
|
#define TR_REPEAT_AT_ZERO "Wiederholrate"
|
|
#define TR_BATT_CALIB TR("AkkuSpgwert", "Akku Kalibrierung")
|
|
#define TR_CURRENT_CALIB "Strom abgl."
|
|
#define TR_VOLTAGE TR("Spg", "Spannungsquelle") //9XR-Pro
|
|
#define TR_SELECT_MODEL "Modell auswählen"
|
|
#define TR_MANAGE_MODELS "MODELL MANAGER"
|
|
#define TR_MODELS "Modelle"
|
|
#define TR_SELECT_MODE "Wähle Mode"
|
|
#define TR_CREATE_MODEL TR("Neues Modell" , "Neues Modell erstellen")
|
|
#define TR_FAVORITE_LABEL "Favoriten"
|
|
#define TR_MODELS_MOVED "Unbenutzte Modelle werden verschoben nach"
|
|
#define TR_NEW_MODEL "Neues Modell"
|
|
#define TR_INVALID_MODEL "ungültiges Modell"
|
|
#define TR_EDIT_LABELS "Label ändern"
|
|
#define TR_LABEL_MODEL "Label zuordnen"
|
|
#define TR_MOVE_UP "Verschiebe nach oben"
|
|
#define TR_MOVE_DOWN "Verschiebe nach unten"
|
|
#define TR_ENTER_LABEL "Enter Label"
|
|
#define TR_LABEL "Label"
|
|
#define TR_LABELS "Labels"
|
|
#define TR_CURRENT_MODEL "aktuell"
|
|
#define TR_ACTIVE "Aktiv"
|
|
#define TR_NEW "Neu"
|
|
#define TR_NEW_LABEL "Neues Label"
|
|
#define TR_RENAME_LABEL "Label umbenennen"
|
|
#define TR_DELETE_LABEL "Label löschen"
|
|
#define TR_DUPLICATE_MODEL "Kopiere Modell"
|
|
#define TR_COPY_MODEL "Kopiere Modell"
|
|
#define TR_MOVE_MODEL "Verschiebe Modell"
|
|
#define TR_BACKUP_MODEL "Modell auf SD-Karte" //9XR-Pro
|
|
#define TR_DELETE_MODEL "Lösche Modell" // TODO merged into DELETEMODEL?
|
|
#define TR_RESTORE_MODEL TR("Modell wiederher.", "Modell wiederherstellen")
|
|
#define TR_DELETE_ERROR "Fehler beim\nLöschen"
|
|
#define TR_SDCARD_ERROR "SD-Kartenfehler"
|
|
#define TR_SDCARD "SD Card"
|
|
#define TR_NO_FILES_ON_SD "Keine Dateien auf SD!"
|
|
#define TR_NO_SDCARD "Keine SD-Karte"
|
|
#define TR_WAITING_FOR_RX "Warten auf RX..."
|
|
#define TR_WAITING_FOR_TX "Warten auf TX..."
|
|
#define TR_WAITING_FOR_MODULE TR("Warten Modul", "Warten auf Modul...")
|
|
#define TR_NO_TOOLS "Keine Tools vorhanden"
|
|
#define TR_NORMAL "Normal"
|
|
#define TR_NOT_INVERTED "Not inv"
|
|
#define TR_NOT_CONNECTED "!Verbunden"
|
|
#define TR_CONNECTED "Verbunden"
|
|
#define TR_FLEX_915 "Flex 915MHz"
|
|
#define TR_FLEX_868 "Flex 868MHz"
|
|
#define TR_16CH_WITHOUT_TELEMETRY TR("16CH ohne Telem.", "16CH ohne Telemetrie")
|
|
#define TR_16CH_WITH_TELEMETRY TR("16CH mit Telem.", "16CH mit Telemetrie")
|
|
#define TR_8CH_WITH_TELEMETRY TR("8CH mit Telem.", "8CH mit Telemetrie")
|
|
#define TR_EXT_ANTENNA "Ext. Antenne"
|
|
#define TR_PIN "Pin"
|
|
#define TR_UPDATE_RX_OPTIONS "Update RX Optionen?"
|
|
#define TR_UPDATE_TX_OPTIONS "Update TX Optionen?"
|
|
#define TR_MODULES_RX_VERSION "Modul / RX version"
|
|
#define TR_SHOW_MIXER_MONITORS "Zeige Mischermonitor"
|
|
#define TR_MENU_MODULES_RX_VERSION "MODUL / RX VERSION"
|
|
#define TR_MENU_FIRM_OPTIONS "FIRMWARE OPTIONEN"
|
|
#define TR_IMU "IMU"
|
|
#define TR_STICKS_POTS_SLIDERS "Knüppel/Poti/Schieber"
|
|
#define TR_PWM_STICKS_POTS_SLIDERS "PWM Knüppel/Poti/Schieber"
|
|
#define TR_RF_PROTOCOL "RF Protokoll"
|
|
#define TR_MODULE_OPTIONS "Modul Optionen"
|
|
#define TR_POWER "Power"
|
|
#define TR_NO_TX_OPTIONS "keine TX Optionen"
|
|
#define TR_RTC_BATT "RTC Batt"
|
|
#define TR_POWER_METER_EXT "Power Meter (EXT)"
|
|
#define TR_POWER_METER_INT "Power Meter (INT)"
|
|
#define TR_SPECTRUM_ANALYSER_EXT "Spectrum (EXT)"
|
|
#define TR_SPECTRUM_ANALYSER_INT "Spectrum (INT)"
|
|
#define TR_SDCARD_FULL "SD-Karte voll"
|
|
#if defined(COLORLCD)
|
|
#define TR_SDCARD_FULL_EXT TR_SDCARD_FULL "\nLogs und Screenshots deaktiviert"
|
|
#else
|
|
#define TR_SDCARD_FULL_EXT TR_SDCARD_FULL "\036Logs und " LCDW_128_LINEBREAK "Screenshots deaktiviert"
|
|
#endif
|
|
#define TR_NEEDS_FILE "Datei benötigt"
|
|
#define TR_EXT_MULTI_SPEC "opentx-inv"
|
|
#define TR_INT_MULTI_SPEC "stm-opentx-noinv"
|
|
#define TR_INCOMPATIBLE "Nicht kompatibel"
|
|
#define TR_WARNING "WARNUNG"
|
|
#define TR_STORAGE_WARNING "SPEICHER"
|
|
#define TR_THROTTLE_UPPERCASE "GAS"
|
|
#define TR_ALARMSWARN "ALARM"
|
|
#define TR_SWITCHWARN "SCHALTER"
|
|
#define TR_FAILSAFEWARN "FAILSAFE"
|
|
#define TR_TEST_WARNING TR("TESTING", "TEST BUILD")
|
|
#define TR_TEST_NOTSAFE "Use for tests only"
|
|
#define TR_WRONG_SDCARDVERSION TR("Erw. Version: ","Erwartete Version: ")
|
|
#define TR_WARN_RTC_BATTERY_LOW "RTC Batterie schwach"
|
|
#define TR_WARN_MULTI_LOWPOWER "reduzierte Leistung"
|
|
#define TR_BATTERY "AKKU"
|
|
#define TR_WRONG_PCBREV "Falsche PCB erkannt"
|
|
#define TR_EMERGENCY_MODE "NOTFALL MODUS"
|
|
#define TR_NO_FAILSAFE TR("Failsafe not set", "Failsafe nicht programmiert")
|
|
#define TR_KEYSTUCK "Taste klemmt" //Key stuck=Taste klemmt
|
|
#define TR_VOLUME "Lautstärke"
|
|
#define TR_LCD "Bildschirm"
|
|
#define TR_BRIGHTNESS "Helligkeit"
|
|
#define TR_CPU_TEMP "CPU-Temp.\016>"
|
|
#define TR_COPROC "CoProz."
|
|
#define TR_COPROC_TEMP "MB Temp. \016>"
|
|
#define TR_TTL_WARNING "Warnung: An den TX/RX Pins dürfen 3.3V nicht überschritten werden!"
|
|
#define TR_FUNC "Funktion"
|
|
#define TR_V1 "V1"
|
|
#define TR_V2 "V2"
|
|
#define TR_DURATION "Dauer"
|
|
#define TR_DELAY "Verzögerung"
|
|
#define TR_SD_CARD "SD-Karte"
|
|
#define TR_SDHC_CARD "SDHC-Karte"
|
|
#define TR_NO_SOUNDS_ON_SD "Keine Töne auf SD"
|
|
#define TR_NO_MODELS_ON_SD "Kein Modelle auf SD"
|
|
#define TR_NO_BITMAPS_ON_SD "Keine Bitmaps auf SD"
|
|
#define TR_NO_SCRIPTS_ON_SD "Keine Skripte auf SD"
|
|
#define TR_SCRIPT_SYNTAX_ERROR TR("Syntaxfehler", "Skript Syntaxfehler")
|
|
#define TR_SCRIPT_PANIC "Skript Panik"
|
|
#define TR_SCRIPT_KILLED "Skript beendet"
|
|
#define TR_SCRIPT_ERROR "Unbekannter Fehler"
|
|
#define TR_PLAY_FILE "Abspielen"
|
|
#define TR_DELETE_FILE "Löschen"
|
|
#define TR_COPY_FILE "Kopieren"
|
|
#define TR_RENAME_FILE "Umbenennen"
|
|
#define TR_ASSIGN_BITMAP "Bitmap zuordnen"
|
|
#define TR_ASSIGN_SPLASH "Als Startbild"
|
|
#define TR_EXECUTE_FILE "Execute"
|
|
#define TR_REMOVED " gelöscht"
|
|
#define TR_SD_INFO "Information"
|
|
#define TR_NA "N/V" //NV=Nicht Verfügbar Kurz-Meldung
|
|
#define TR_HARDWARE TR("Hardware einst. ", "Namen und Hardware einst.")
|
|
#define TR_FORMATTING "Formatierung..."
|
|
#define TR_TEMP_CALIB "Temp. abgl."
|
|
#define TR_TIME "Uhrzeit:"
|
|
#define TR_BAUDRATE "Baudrate"
|
|
#define TR_CRSF_ARMING_MODE "Arm via"
|
|
#define TR_CRSF_ARMING_MODES TR_CH"5", TR_SWITCH
|
|
#define TR_MAXBAUDRATE "Max Baud"
|
|
#define TR_SAMPLE_MODE "Abtastmodus"
|
|
#define TR_SAMPLE_MODES "Normal","OneBit"
|
|
#define TR_LOADING "Wird geladen..."
|
|
#define TR_DELETE_THEME "Theme löschen?"
|
|
#define TR_SAVE_THEME "Theme speichern?"
|
|
#define TR_EDIT_COLOR "Farbe bearbeiten"
|
|
#define TR_NO_THEME_IMAGE "Kein Theme Bild"
|
|
#define TR_BACKLIGHT_TIMER "Inaktivitäts Timeout"
|
|
|
|
#if defined(COLORLCD)
|
|
#define TR_MODEL_QUICK_SELECT "schnelle Modellauswahl"
|
|
#define TR_LABELS_SELECT "Labelauswahl"
|
|
#define TR_LABELS_MATCH "Labelvergleich"
|
|
#define TR_FAV_MATCH "Favoriten vergleichen"
|
|
#define TR_LABELS_SELECT_MODE "Mehrfachauswahl", "Einfachauswahl"
|
|
#define TR_LABELS_MATCH_MODE "Alle", "Beliebig"
|
|
#define TR_FAV_MATCH_MODE "Muss übereinstimmen", "Alternative Übereinstimmung"
|
|
#endif
|
|
|
|
#define TR_SELECT_TEMPLATE_FOLDER "WÄHLE VORLAGENVERZEICHNIS:"
|
|
#define TR_SELECT_TEMPLATE "WÄHLE MODELLVORLAGE:"
|
|
#define TR_NO_TEMPLATES "Es wurden keine Modellvorlagen in diesem Verzeichnis gefunden"
|
|
#define TR_SAVE_TEMPLATE "Als Vorlage speichern"
|
|
#define TR_BLANK_MODEL "Leeres Modell"
|
|
#define TR_BLANK_MODEL_INFO "Erzeuge leeres Modell"
|
|
#define TR_FILE_EXISTS "DATEI EXISTIERT SCHON"
|
|
#define TR_ASK_OVERWRITE "Möchten Sie überschreiben?"
|
|
|
|
#define TR_BLUETOOTH "Bluetooth"
|
|
#define TR_BLUETOOTH_DISC "Suchen"
|
|
#define TR_BLUETOOTH_INIT "Init"
|
|
#define TR_BLUETOOTH_DIST_ADDR "Dist addr"
|
|
#define TR_BLUETOOTH_LOCAL_ADDR "Local addr"
|
|
#define TR_BLUETOOTH_PIN_CODE "PIN Code"
|
|
#define TR_BLUETOOTH_NODEVICES "kein Gerät gefunden"
|
|
#define TR_BLUETOOTH_SCANNING "Suche..."
|
|
#define TR_BLUETOOTH_BAUDRATE "BT Baudrate"
|
|
#if defined(PCBX9E)
|
|
#define TR_BLUETOOTH_MODES "---","Aktiviert"
|
|
#else
|
|
#define TR_BLUETOOTH_MODES "---","Telemetrie","Trainer"
|
|
#endif
|
|
#define TR_SD_INFO_TITLE "SD-INFO"
|
|
#define TR_SD_SPEED "Geschw:"
|
|
#define TR_SD_SECTORS "Sektoren:"
|
|
#define TR_SD_SIZE "Größe:"
|
|
#define TR_TYPE "Typ"
|
|
#define TR_GLOBAL_VARS "Globale Variablen"
|
|
#define TR_GVARS "GLOBALE V."
|
|
#define TR_GLOBAL_VAR "Globale Variable"
|
|
#define TR_MENU_GLOBAL_VARS "GLOBALE VARIABLEN"
|
|
#define TR_OWN "Eigen"
|
|
#define TR_DATE "Datum:"
|
|
#define TR_MONTHS { "Jan", "Feb", "Mar", "Apr", "Mai", "Jun", "Jul", "Aug", "Sep", "Okt", "Nov", "Dez" }
|
|
#define TR_ROTARY_ENCODER "Drehg."
|
|
#define TR_ROTARY_ENC_MODE TR("Drehg. Modus","Drehgeber Modus")
|
|
#define TR_CHANNELS_MONITOR "Kanal-Monitor==>"
|
|
#define TR_MIXERS_MONITOR "==>Mischer Monitor"
|
|
#define TR_PATH_TOO_LONG "Pfad zu Lang"
|
|
#define TR_VIEW_TEXT "Zeige Text"
|
|
#define TR_FLASH_DEVICE TR("Flash Gerät","Flash Gerät")
|
|
#define TR_FLASH_BOOTLOADER TR("Flash bootloader","Flash bootloader")
|
|
#define TR_FLASH_EXTERNAL_DEVICE TR("Flash ext. Gerät","Flash externes Gerät")
|
|
#define TR_FLASH_RECEIVER_OTA "Flash receiver OTA"
|
|
#define TR_FLASH_RECEIVER_BY_EXTERNAL_MODULE_OTA "Flash RX by ext. OTA"
|
|
#define TR_FLASH_RECEIVER_BY_INTERNAL_MODULE_OTA "Flash RX by int. OTA"
|
|
#define TR_FLASH_FLIGHT_CONTROLLER_BY_EXTERNAL_MODULE_OTA "Flash FC by ext. OTA"
|
|
#define TR_FLASH_FLIGHT_CONTROLLER_BY_INTERNAL_MODULE_OTA "Flash FC by int. OTA"
|
|
#define TR_FLASH_BLUETOOTH_MODULE TR("Flash BT module", "Flash Bluetoothmodul")
|
|
#define TR_FLASH_POWER_MANAGEMENT_UNIT TR("Flash pwr mngt unit", "Flash power management unit")
|
|
#define TR_DEVICE_NO_RESPONSE TR("Gerät antwortet nicht", "Gerät antwortet nicht")
|
|
#define TR_DEVICE_FILE_ERROR TR("G.-Dateiproblem", "G.-Dateiproblem")
|
|
#define TR_DEVICE_DATA_REFUSED TR("G.-Daten abg.", "G.-Daten abg.")
|
|
#define TR_DEVICE_WRONG_REQUEST TR("G.-Zugriffsfehler", "G.-Zugriffsfehler")
|
|
#define TR_DEVICE_FILE_REJECTED TR("G.-Datei abg.", "G.-Datei abg.")
|
|
#define TR_DEVICE_FILE_WRONG_SIG TR("G.-Datei Sig.", "G.-Datei Sig.")
|
|
#define TR_CURRENT_VERSION TR("Current vers. ", "Current version: ")
|
|
#define TR_FLASH_INTERNAL_MODULE TR("Flash int. XJT","Flash internes XJT-Modul")
|
|
#define TR_FLASH_INTERNAL_MULTI TR("Flash Int. Multi", "Flash int. Multimodul")
|
|
#define TR_FLASH_EXTERNAL_MODULE TR("Flash ext. mod","Flash ext. Modul")
|
|
#define TR_FLASH_EXTERNAL_MULTI TR("Flash Ext. Multi", "Flash ext. Multimodul")
|
|
#define TR_FLASH_EXTERNAL_ELRS TR("Flash Ext. ELRS", "Flash External ELRS")
|
|
#define TR_FIRMWARE_UPDATE_ERROR TR("FW update Error","Firmware Updatefehler")
|
|
#define TR_FIRMWARE_UPDATE_SUCCESS TR3("Flash successful","Flash successful","Update erfolgreich")
|
|
#define TR_WRITING "Schreibe..."
|
|
#define TR_CONFIRM_FORMAT "Formatieren bestätigen?"
|
|
#define TR_INTERNALRF "Internes HF-Modul"
|
|
#define TR_INTERNAL_MODULE TR("Int. Modul", "Internes Modul")
|
|
#define TR_EXTERNAL_MODULE TR("Ext. Modul", "Externes Modul")
|
|
#define TR_EDGETX_UPGRADE_REQUIRED "EdgeTX upgrade nötig"
|
|
#define TR_TELEMETRY_DISABLED "Deaktiv. Telem." //more chars doesn't fit on QX7
|
|
#define TR_MORE_OPTIONS_AVAILABLE "mehr Optionen verfügbar"
|
|
#define TR_NO_MODULE_INFORMATION "keine Modul Info"
|
|
#define TR_EXTERNALRF "Externes HF-Modul"
|
|
#define TR_FAILSAFE TR("Failsafe", "Failsafe Mode")
|
|
#define TR_FAILSAFESET "Failsafe setzen"
|
|
#define TR_REG_ID TR("Reg. ID", "Registration ID")
|
|
#define TR_OWNER_ID "Owner ID"
|
|
#define TR_HOLD "Hold"
|
|
#define TR_HOLD_UPPERCASE "HOLD"
|
|
#define TR_NONE "None"
|
|
#define TR_NONE_UPPERCASE "NONE"
|
|
#define TR_MENUSENSOR "SENSOR"
|
|
#define TR_POWERMETER_PEAK "Peak"
|
|
#define TR_POWERMETER_POWER "Power"
|
|
#define TR_POWERMETER_ATTN "Attn"
|
|
#define TR_POWERMETER_FREQ "Freq."
|
|
#define TR_MENUTOOLS "TOOLS"
|
|
#define TR_TURN_OFF_RECEIVER "Empf. ausschalten"
|
|
#define TR_STOPPING "Stoppe..."
|
|
#define TR_MENU_SPECTRUM_ANALYSER "SPECTRUM ANALYSER"
|
|
#define TR_MENU_POWER_METER "POWER METER"
|
|
#define TR_SENSOR "SENSOR"
|
|
#define TR_COUNTRY_CODE "Landescode"
|
|
#define TR_USBMODE "USB Modus"
|
|
#define TR_JACK_MODE "Jack Mode"
|
|
#define TR_VOICE_LANGUAGE "Sprachansagen"
|
|
#define TR_UNITS_SYSTEM "Einheiten"
|
|
#define TR_UNITS_PPM "PPM Einheiten"
|
|
#define TR_EDIT "Zeile Editieren"
|
|
#define TR_INSERT_BEFORE "Neue Zeile davor"
|
|
#define TR_INSERT_AFTER "Neue Zeile danach"
|
|
#define TR_COPY "Zeile kopieren"
|
|
#define TR_MOVE "Zeile verschieben"
|
|
#define TR_PASTE "Zeile einfügen"
|
|
#define TR_PASTE_AFTER "Einfügen danach"
|
|
#define TR_PASTE_BEFORE "Einfügen davor"
|
|
#define TR_DELETE "Zeile löschen"
|
|
#define TR_INSERT "Neue Zeile"
|
|
#define TR_RESET_FLIGHT "Reset Flugdaten"
|
|
#define TR_RESET_TIMER1 "Reset Timer1"
|
|
#define TR_RESET_TIMER2 "Reset Timer2"
|
|
#define TR_RESET_TIMER3 "Reset Timer3"
|
|
#define TR_RESET_TELEMETRY "Reset Telemetrie"
|
|
#define TR_STATISTICS "Statistik Timer Gas"
|
|
#define TR_ABOUT_US "Die Programmierer"
|
|
#define TR_USB_JOYSTICK "USB Joystick (HID)"
|
|
#define TR_USB_MASS_STORAGE "USB Speicher (SD)"
|
|
#define TR_USB_SERIAL "USB Seriell (VCP)"
|
|
#define TR_SETUP_SCREENS "Setup Hauptbildschirme"
|
|
#define TR_MONITOR_SCREENS "Monitore Mischer Kanal Logik"
|
|
#define TR_AND_SWITCH "UND Schalt" // UND mit weiterem Schaltern
|
|
#define TR_SF "SF" // Spezial Funktionen
|
|
#define TR_GF "GF" // Globale Funktionen
|
|
#define TR_ANADIAGS_CALIB "analoge Geber Kalibriert"
|
|
#define TR_ANADIAGS_FILTRAWDEV "analoge Geber gefiltert und unbearbeitet mit Abweichungen"
|
|
#define TR_ANADIAGS_UNFILTRAW "analoge Geber ungefiltert und unbearbeitet"
|
|
#define TR_ANADIAGS_MINMAX "Min., Max. und Bereich"
|
|
#define TR_ANADIAGS_MOVE "Move analogs to their extremes!"
|
|
#define TR_SPEAKER "Lautspr"
|
|
#define TR_BUZZER "Summer"
|
|
#define TR_BYTES "Bytes"
|
|
#define TR_MODULE_BIND BUTTON(TR("Bnd","Binden")) //9XR-Pro
|
|
#define TR_MODULE_UNBIND BUTTON("Trennen")
|
|
#define TR_POWERMETER_ATTN_NEEDED "Dämpfungsgl. nötig"
|
|
#define TR_PXX2_SELECT_RX "Wähle RX"
|
|
#define TR_PXX2_DEFAULT "<default>"
|
|
#define TR_BT_SELECT_DEVICE "Wähle Gerät"
|
|
#define TR_DISCOVER "Suche"
|
|
#define TR_BUTTON_INIT BUTTON("Init")
|
|
#define TR_WAITING "Warte..."
|
|
#define TR_RECEIVER_DELETE "Empfänger löschen?"
|
|
#define TR_RECEIVER_RESET "Empfänger resetten?"
|
|
#define TR_SHARE "Share"
|
|
#define TR_BIND "Binden"
|
|
#define TR_REGISTER TR("Reg", "Register")
|
|
#define TR_MODULE_RANGE BUTTON(TR3("Rng", "Reichw", "Reichweite"))
|
|
#define TR_RANGE_TEST "Reichweitentest"
|
|
#define TR_RECEIVER_OPTIONS TR("RX OPTIONEN", "RX OPTIONEN")
|
|
#define TR_RESET_BTN BUTTON("Reset")
|
|
#define TR_DEBUG "Testen"
|
|
#define TR_KEYS_BTN BUTTON(TR("SW","Schalter"))
|
|
#define TR_ANALOGS_BTN BUTTON(TR("Analog","Analoge"))
|
|
#define TR_FS_BTN BUTTON(TR("AnpSchalt", TR_FUNCTION_SWITCHES))
|
|
#define TR_TOUCH_NOTFOUND "Touch hardware not found"
|
|
#define TR_TOUCH_EXIT "Touch screen to exit"
|
|
#define TR_CALIBRATION "Kalibrieren"
|
|
#define TR_SET BUTTON("Set")
|
|
#define TR_TRAINER "Lehrer/Schüler"
|
|
#define TR_CHANS "Chans"
|
|
#define TR_ANTENNAPROBLEM "TX-Antennenproblem!"
|
|
#define TR_MODELIDUSED "ID benutzt in:"
|
|
#define TR_MODELIDUNIQUE "ID ist eindeutig"
|
|
#define TR_MODULE "Modul-Typ"
|
|
#define TR_RX_NAME "Rx Name"
|
|
#define TR_TELEMETRY_TYPE TR("Typ", "Telemetrietyp")
|
|
#define TR_TELEMETRY_SENSORS "Sensoren"
|
|
#define TR_VALUE "Wert"
|
|
#define TR_PERIOD "Periode"
|
|
#define TR_INTERVAL "Intervall"
|
|
#define TR_REPEAT "Wiederholung"
|
|
#define TR_ENABLE "Aktivieren"
|
|
#define TR_DISABLE "Deaktivieren"
|
|
#define TR_TOPLCDTIMER "oberer LCD Timer"
|
|
#define TR_UNIT "Einheit"
|
|
#define TR_TELEMETRY_NEWSENSOR "Sensor hinzufügen ..."
|
|
#define TR_CHANNELRANGE TR("Kanäle", "Ausgangs Kanäle") //wg 9XR-Pro
|
|
#define TR_AFHDS3_RX_FREQ TR("RX Freq.", "RX Frequenz")
|
|
#define TR_AFHDS3_ONE_TO_ONE_TELEMETRY TR("Unicast/Tel.", "Unicast/Telemetrie")
|
|
#define TR_AFHDS3_ONE_TO_MANY "Multicast"
|
|
#define TR_AFHDS3_ACTUAL_POWER TR("Tat.Leis", "tatsäch. Leistung")
|
|
#define TR_AFHDS3_POWER_SOURCE TR("Stromqu.", "Stromquelle")
|
|
#define TR_ANTENNACONFIRM1 "Ant. umschalten"
|
|
#if defined(PCBX12S)
|
|
#define TR_ANTENNA_MODES "Intern","Frag","Modellspezifisch","Intern + Extern"
|
|
#else
|
|
#define TR_ANTENNA_MODES "Intern","Frag","Modellspezifisch","Extern"
|
|
#endif
|
|
#define TR_USE_INTERNAL_ANTENNA TR("Use int. antenna", "Use internal antenna")
|
|
#define TR_USE_EXTERNAL_ANTENNA TR("Use ext. antenna", "Use external antenna")
|
|
#define TR_ANTENNACONFIRM2 TR("Check antenna", "Ist eine externe Antenne installiert?")
|
|
#define TR_MODULE_PROTOCOL_FLEX_WARN_LINE1 "Requires non"
|
|
#define TR_MODULE_PROTOCOL_FCC_WARN_LINE1 "Benötigt FCC"
|
|
#define TR_MODULE_PROTOCOL_EU_WARN_LINE1 "Benötigt EU"
|
|
#define TR_MODULE_PROTOCOL_WARN_LINE2 "certified firmware"
|
|
#define TR_LOWALARM "1.Warnschwelle"
|
|
#define TR_CRITICALALARM "Kritischer Alarm"
|
|
#define TR_DISABLE_ALARM TR("Alarme AUS", "Telemetrie Alarme AUS")
|
|
#define TR_POPUP "Popup"
|
|
#define TR_MIN "Min"
|
|
#define TR_MAX "Max"
|
|
#define TR_CURVE_PRESET "Gerade 0 11 22 33 45"
|
|
#define TR_PRESET "Preset"
|
|
#define TR_MIRROR "Spiegeln"
|
|
#define TR_CLEAR "Löschen"
|
|
#define TR_RESET TR("Servowert reset","Servowerte zurücksetzen")
|
|
#define TR_RESET_SUBMENU TR("Reset Werte ==>", "Reset=>Timer Flug Telem")
|
|
#define TR_COUNT "Punkte"
|
|
#define TR_PT "Pt"
|
|
#define TR_PTS "Pts"
|
|
#define TR_SMOOTH "Runden"
|
|
#define TR_COPY_STICKS_TO_OFS TR("Kop. Knüppel->Subtrim", "Kopiere Knüppel zu Subtrim")
|
|
#define TR_COPY_MIN_MAX_TO_OUTPUTS TR3("Cpy min/max to all", "Kopiere min/max zu allen" , "Kopiere Limits & Mitte auf alle Kanäle")
|
|
#define TR_COPY_TRIMS_TO_OFS TR3("Copy Trim->Subtrim", "Kopiere Trimm zu Subtrim" , "Kopiere Trimmposition auf Subtrim") // "Trim to Subtrim"
|
|
#define TR_INCDEC "Inc/Decrement"
|
|
#define TR_GLOBALVAR "Global Var"
|
|
#define TR_MIXSOURCE "Quelle (%)"
|
|
#define TR_MIXSOURCERAW "Quelle (Wert)"
|
|
#define TR_CONSTANT "Konstant"
|
|
#define TR_PREFLIGHT_POTSLIDER_CHECK "Aus","Ein","Auto"
|
|
#define TR_PREFLIGHT "Vorflug-Checkliste"
|
|
#define TR_CHECKLIST TR("Checkliste", "Checkliste anzeigen")
|
|
#define TR_CHECKLIST_INTERACTIVE TR3("C-Interaktiv", "Interakt. Checkl.", "Interaktive Checkliste")
|
|
#define TR_AUX_SERIAL_MODE "Serieller Port"
|
|
#define TR_AUX2_SERIAL_MODE "Serieller Port 2"
|
|
#define TR_AUX_SERIAL_PORT_POWER "Versorgung"
|
|
#define TR_SCRIPT "Lua-Skript"
|
|
#define TR_INPUTS "Eingaben"
|
|
#define TR_OUTPUTS "Ausgaben"
|
|
#define STR_EEBACKUP TR("EEPROM->SD", "Backup EEPROM->SD-Karte")
|
|
#define STR_FACTORYRESET TR("Werksreset", "Auf Werkseinstellungen")
|
|
#define TR_CONFIRMRESET TR("Alles löschen? ","ALLE Modelle+Einst. löschen?")
|
|
#define TR_TOO_MANY_LUA_SCRIPTS "Zu viele Skripte!"
|
|
#define TR_SPORT_UPDATE_POWER_MODE "SP Power"
|
|
#define TR_SPORT_UPDATE_POWER_MODES "AUTO","EIN"
|
|
#define TR_NO_TELEMETRY_SCREENS "Keine Telemetrie Seiten"
|
|
#define TR_TOUCH_PANEL "Touch panel:"
|
|
#define TR_FILE_SIZE "Dateigröße"
|
|
#define TR_FILE_OPEN "trotzdem öffnen?"
|
|
#define TR_TIMER_MODES {TR_OFFON,TR_START,TR_THROTTLE_LABEL,TR_THROTTLE_PERCENT_LABEL,TR_THROTTLE_START}
|
|
|
|
// Horus and Taranis specific column headers
|
|
#define TR_PHASES_HEADERS_NAME "Name "
|
|
#define TR_PHASES_HEADERS_SW "Schalter"
|
|
#define TR_PHASES_HEADERS_RUD_TRIM "Trim Seite"
|
|
#define TR_PHASES_HEADERS_ELE_TRIM "Trim Höhe"
|
|
#define TR_PHASES_HEADERS_THT_TRIM "Trim Gas"
|
|
#define TR_PHASES_HEADERS_AIL_TRIM "Trim Quer"
|
|
#define TR_PHASES_HEADERS_CH5_TRIM "Trim 5"
|
|
#define TR_PHASES_HEADERS_CH6_TRIM "Trim 6"
|
|
#define TR_PHASES_HEADERS_FAD_IN "Langs Ein"
|
|
#define TR_PHASES_HEADERS_FAD_OUT "Langs Aus"
|
|
|
|
#if defined(COLORLCD)
|
|
// Horus layouts and widgets
|
|
#define TR_FIRST_CHANNEL "Erster Kanal"
|
|
#define TR_FILL_BACKGROUND "Hintergrund füllen?"
|
|
#define TR_BG_COLOR "Hintergrundfarbe"
|
|
#define TR_SLIDERS_TRIMS "Schieber+Trim"
|
|
#define TR_SLIDERS "Schieber"
|
|
#define TR_FLIGHT_MODE "Flugphase"
|
|
#define TR_INVALID_FILE "ungültige Datei"
|
|
#define TR_TIMER_SOURCE "Timer Quelle"
|
|
#define TR_SIZE "Größe"
|
|
#define TR_SHADOW "Schatten"
|
|
#define TR_ALIGNMENT "Ausrichtung"
|
|
#define TR_ALIGN_LABEL "Name ausrichten"
|
|
#define TR_ALIGN_VALUE "Wert ausrichten"
|
|
#define TR_ALIGN_OPTS { "Links", "Mitte", "Rechts" }
|
|
#define TR_TEXT "Text"
|
|
#define TR_COLOR "Farbe"
|
|
#define TR_MAIN_VIEW_X "Hauptansicht XX"
|
|
#define TR_PANEL1_BACKGROUND "Panel1 Hintergrund"
|
|
#define TR_PANEL2_BACKGROUND "Panel2 Hintergrund"
|
|
#define TR_WIDGET_GAUGE "Pegel"
|
|
#define TR_WIDGET_MODELBMP "Modellinfo"
|
|
#define TR_WIDGET_OUTPUTS "Ausgänge"
|
|
#define TR_WIDGET_TEXT "Text"
|
|
#define TR_WIDGET_TIMER "Timer"
|
|
#define TR_WIDGET_VALUE "Wert"
|
|
#endif
|
|
|
|
// Taranis Info Zeile Anzeigen
|
|
#define TR_LIMITS_HEADERS_NAME "Name"
|
|
#define TR_LIMITS_HEADERS_SUBTRIM "Subtrim"
|
|
#define TR_LIMITS_HEADERS_MIN "Min"
|
|
#define TR_LIMITS_HEADERS_MAX "Max"
|
|
#define TR_LIMITS_HEADERS_DIRECTION "Richtung"
|
|
#define TR_LIMITS_HEADERS_CURVE "Kurve"
|
|
#define TR_LIMITS_HEADERS_PPMCENTER "PPM Mitte"
|
|
#define TR_LIMITS_HEADERS_SUBTRIMMODE "Subtrim Modus"
|
|
#define TR_INVERTED "Invertiert"
|
|
|
|
|
|
// Horus footer descriptions
|
|
#define TR_LSW_DESCRIPTIONS { "Vergleich oder Funktion", "Erste Variable", "Zweite Variable/Konstante", "Zweite Variable/Konstante", "Weitere UND Bedingung für Freigabe des Log Schalters", "ON-Zeit des Log Schalters wenn Bedingung ok", "Mindestdauer der Bedingung damit Log Schalter ON geht" }
|
|
|
|
//Taranis About screen
|
|
#define TR_ABOUTUS TR(" Info ", "Info")
|
|
|
|
#define TR_CHR_HOUR 'h' // Stunden
|
|
#define TR_CHR_INPUT 'I' // Values between A-I will work
|
|
|
|
#define TR_BEEP_VOLUME "Beep-Lautst."
|
|
#define TR_WAV_VOLUME "Wav-Lautst."
|
|
#define TR_BG_VOLUME TR("Bgr-Lautst.", "Hintergrund-Lautstärke")
|
|
|
|
#define TR_TOP_BAR "Infozeile"
|
|
#define TR_FLASH_ERASE "Flash erase..."
|
|
#define TR_FLASH_WRITE "Flash write..."
|
|
#define TR_OTA_UPDATE "OTA update..."
|
|
#define TR_MODULE_RESET "Modul reset..."
|
|
#define TR_UNKNOWN_RX "unbekannter RX"
|
|
#define TR_UNSUPPORTED_RX "nicht unterstützter RX"
|
|
#define TR_OTA_UPDATE_ERROR "OTA Update Fehler"
|
|
#define TR_DEVICE_RESET "Gerät Reset..."
|
|
#define TR_ALTITUDE "Höhenanzeige"
|
|
#define TR_SCALE "Skalieren"
|
|
#define TR_VIEW_CHANNELS "Zeige Kanäle"
|
|
#define TR_VIEW_NOTES "Zeige Notizen"
|
|
#define TR_MODEL_SELECT "Modell auswählen"
|
|
#define TR_ID "ID"
|
|
#define TR_PRECISION "Präzision"
|
|
#define TR_RATIO "Umrechnung" //Faktor, Mulitplikator, Teiler 0,1 bis 10,0
|
|
#define TR_FORMULA "Formel"
|
|
#define TR_CELLINDEX "Zellenindex"
|
|
#define TR_LOGS "Log Daten"
|
|
#define TR_OPTIONS "Optionen"
|
|
#define TR_FIRMWARE_OPTIONS "Firmwareoptionen"
|
|
|
|
#define TR_ALTSENSOR "Höhen Sensor"
|
|
#define TR_CELLSENSOR "Zellen Sensor"
|
|
#define TR_GPSSENSOR "GPS Sensor"
|
|
#define TR_CURRENTSENSOR "Sensor"
|
|
#define TR_AUTOOFFSET "Auto Offset"
|
|
#define TR_ONLYPOSITIVE "Nur Positiv"
|
|
#define TR_FILTER "Filter aktiv"
|
|
#define TR_TELEMETRYFULL TR("Telem voll!", "Telemetriezeilen voll!")
|
|
#define TR_IGNORE_INSTANCE TR("No Inst.", "Ignor. Instanzen")
|
|
#define TR_SHOW_INSTANCE_ID "zeige Instanz ID"
|
|
#define TR_DISCOVER_SENSORS "Start Sensorsuche"
|
|
#define TR_STOP_DISCOVER_SENSORS "Stop Sensorsuche"
|
|
#define TR_DELETE_ALL_SENSORS "Lösche alle Sensoren"
|
|
#define TR_CONFIRMDELETE "Wirklich alle " LCDW_128_LINEBREAK "löschen ?"
|
|
#define TR_SELECT_WIDGET "Widget auswählen" // grafisches Element
|
|
#define TR_WIDGET_FULLSCREEN "Vollbild"
|
|
#define TR_REMOVE_WIDGET "Widget löschen"
|
|
#define TR_WIDGET_SETTINGS "Widget einstellen"
|
|
#define TR_REMOVE_SCREEN "Seite löschen"
|
|
#define TR_SETUP_WIDGETS "Widget einrichten"
|
|
#define TR_USER_INTERFACE "Benutzerschnittstelle"
|
|
#define TR_THEME "Theme"
|
|
#define TR_SETUP "Einrichten"
|
|
#define TR_LAYOUT "Layout"
|
|
#define TR_ADD_MAIN_VIEW "Ansicht hinzufügen"
|
|
#define TR_TEXT_COLOR "Textfarbe"
|
|
// ----------------------------- Symbole für Auswahlliste----------
|
|
#define TR_MENU_INPUTS STR_CHAR_INPUT "Inputs"
|
|
#define TR_MENU_LUA STR_CHAR_LUA "Lua Skripte"
|
|
#define TR_MENU_STICKS STR_CHAR_STICK "Knüppel"
|
|
#define TR_MENU_POTS STR_CHAR_POT "Potis"
|
|
#define TR_MENU_MIN STR_CHAR_FUNCTION "MIN"
|
|
#define TR_MENU_MAX STR_CHAR_FUNCTION "MAX"
|
|
#define TR_MENU_HELI STR_CHAR_CYC "Heli-TS CYC1-3"
|
|
#define TR_MENU_TRIMS STR_CHAR_TRIM "Trimmung"
|
|
#define TR_MENU_SWITCHES STR_CHAR_SWITCH "Schalter"
|
|
#define TR_MENU_LOGICAL_SWITCHES STR_CHAR_SWITCH "Log. Schalter"
|
|
#define TR_MENU_TRAINER STR_CHAR_TRAINER "Trainer"
|
|
#define TR_MENU_CHANNELS STR_CHAR_CHANNEL "Kanäle"
|
|
#define TR_MENU_GVARS STR_CHAR_SLIDER "Glob. Vars"
|
|
#define TR_MENU_TELEMETRY STR_CHAR_TELEMETRY "Telemetrie"
|
|
#define TR_MENU_DISPLAY "TELM-SEITEN"
|
|
#define TR_MENU_OTHER "Weitere"
|
|
#define TR_MENU_INVERT "Invertieren<!>"
|
|
#define TR_AUDIO_MUTE TR("Ton Stumm","Geräuschunterdrückung")
|
|
#define TR_JITTER_FILTER "ADC Filter"
|
|
#define TR_DEAD_ZONE "Dead zone"
|
|
#define TR_RTC_CHECK TR("RTC Prüfen", "RTC Spann. prüfen")
|
|
#define TR_AUTH_FAILURE "Auth-Fehler"
|
|
#define TR_RACING_MODE "Racing mode"
|
|
|
|
#define TR_USE_THEME_COLOR "Farbe des Themes verwenden"
|
|
|
|
#define TR_ADD_ALL_TRIMS_TO_SUBTRIMS "Alle Trimmungen übernehmen"
|
|
#if !NARROW_LAYOUT
|
|
#define TR_OPEN_CHANNEL_MONITORS "Öffne Kanalmonitor"
|
|
#else
|
|
#define TR_OPEN_CHANNEL_MONITORS "Öffne Kanalmon."
|
|
#endif
|
|
#define TR_DUPLICATE "Duplizieren"
|
|
#define TR_ACTIVATE "Aktivieren"
|
|
#define TR_RED "Rot"
|
|
#define TR_BLUE "Blau"
|
|
#define TR_GREEN "Grün"
|
|
#define TR_COLOR_PICKER "Farbauswahl"
|
|
#define TR_FIXED "Fixed"
|
|
#define TR_EDIT_THEME_DETAILS "Theme Details Bearb."
|
|
#define TR_THEME_COLOR_DEFAULT "Standard"
|
|
#define TR_THEME_COLOR_PRIMARY1 "Primär1"
|
|
#define TR_THEME_COLOR_PRIMARY2 "Primär2"
|
|
#define TR_THEME_COLOR_PRIMARY3 "Primär3"
|
|
#define TR_THEME_COLOR_SECONDARY1 "Sekundär1"
|
|
#define TR_THEME_COLOR_SECONDARY2 "Sekundär2"
|
|
#define TR_THEME_COLOR_SECONDARY3 "Sekundär3"
|
|
#define TR_THEME_COLOR_FOCUS "Fokus"
|
|
#define TR_THEME_COLOR_EDIT "Edit"
|
|
#define TR_THEME_COLOR_ACTIVE "Aktiv"
|
|
#define TR_THEME_COLOR_WARNING "Warnung"
|
|
#define TR_THEME_COLOR_DISABLED "Deaktiviert"
|
|
#define TR_THEME_COLOR_CUSTOM "Eigene"
|
|
#define TR_THEME_CHECKBOX "Schalter"
|
|
#define TR_THEME_ACTIVE "Aktiv"
|
|
#define TR_THEME_REGULAR "Regulär"
|
|
#define TR_THEME_WARNING "Warnung"
|
|
#define TR_THEME_DISABLED "Inaktiv"
|
|
#define TR_THEME_EDIT "Editieren"
|
|
#define TR_THEME_FOCUS "Fokus"
|
|
#define TR_AUTHOR "Author"
|
|
#define TR_DESCRIPTION "Beschreibung"
|
|
#define TR_SAVE "Speichern"
|
|
#define TR_CANCEL "Abbruch"
|
|
#define TR_EDIT_THEME "THEME Editieren"
|
|
#define TR_DETAILS "Details"
|
|
#define TR_THEME_EDITOR "THEMES"
|
|
|
|
// Main menu
|
|
#define TR_MAIN_MENU_SELECT_MODEL "Wähle\nModell"
|
|
#define TR_MAIN_MENU_MANAGE_MODELS "Modell\nManager"
|
|
#define TR_MAIN_MENU_MODEL_NOTES "Modell\nNotizen"
|
|
#define TR_MAIN_MENU_CHANNEL_MONITOR "Kanal\nMonitor"
|
|
#define TR_MAIN_MENU_MODEL_SETTINGS "Modell\nKonfig."
|
|
#define TR_MAIN_MENU_RADIO_SETTINGS "Sender\nKonfig."
|
|
#define TR_MAIN_MENU_SCREEN_SETTINGS "Seiten\nKonfig."
|
|
#define TR_MAIN_MENU_RESET_TELEMETRY "Reset\nTelemetrie"
|
|
#define TR_MAIN_MENU_STATISTICS "Statistiken"
|
|
#define TR_MAIN_MENU_ABOUT_EDGETX "Über\nEdgeTX"
|
|
// End Main menu
|
|
|
|
// Voice in native language
|
|
#define TR_VOICE_ENGLISH "Englisch"
|
|
#define TR_VOICE_CHINESE "Chinesisch"
|
|
#define TR_VOICE_CZECH "Tschechisch"
|
|
#define TR_VOICE_DANISH "Dänisch"
|
|
#define TR_VOICE_DEUTSCH "Deutsch"
|
|
#define TR_VOICE_DUTCH "Holländisch"
|
|
#define TR_VOICE_ESPANOL "Spanisch"
|
|
#define TR_VOICE_FRANCAIS "Französisch"
|
|
#define TR_VOICE_HUNGARIAN "Ungarisch"
|
|
#define TR_VOICE_ITALIANO "Italienisch"
|
|
#define TR_VOICE_POLISH "Polnisch"
|
|
#define TR_VOICE_PORTUGUES "Portugiesisch"
|
|
#define TR_VOICE_RUSSIAN "Russisch"
|
|
#define TR_VOICE_SLOVAK "Slowenisch"
|
|
#define TR_VOICE_SWEDISH "Schwedisch"
|
|
#define TR_VOICE_TAIWANESE "Taiwanese"
|
|
#define TR_VOICE_JAPANESE "Japanisch"
|
|
#define TR_VOICE_HEBREW "Hebräisch"
|
|
#define TR_VOICE_UKRAINIAN "Ukrainisch"
|
|
#define TR_VOICE_KOREAN "Koreanisch"
|
|
|
|
#define TR_USBJOYSTICK_LABEL "USB Joystick"
|
|
#define TR_USBJOYSTICK_EXTMODE "Modus"
|
|
#define TR_VUSBJOYSTICK_EXTMODE "Klassisch","Erweitert"
|
|
#define TR_USBJOYSTICK_SETTINGS "Kanal Einstellungen"
|
|
#define TR_USBJOYSTICK_IF_MODE TR("If.Modus","Interface Modus")
|
|
#define TR_VUSBJOYSTICK_IF_MODE "Joystick","Gamepad","MultiAchsen"
|
|
#define TR_USBJOYSTICK_CH_MODE "Modus"
|
|
#define TR_VUSBJOYSTICK_CH_MODE "Kein","Tasten","Achse","Sim"
|
|
#define TR_VUSBJOYSTICK_CH_MODE_S "-","B","A","S"
|
|
#define TR_USBJOYSTICK_CH_BTNMODE "Tasten Modus"
|
|
#define TR_VUSBJOYSTICK_CH_BTNMODE "Normal","Puls","SWEmu","Delta","Companion"
|
|
#define TR_VUSBJOYSTICK_CH_BTNMODE_S TR("Norm","Normal"),TR("Puls","Puls"),TR("SWEm","SWEmul"),TR("Delt","Delta"),TR("CPN","Companion")
|
|
#define TR_USBJOYSTICK_CH_SWPOS "Positionen"
|
|
#define TR_VUSBJOYSTICK_CH_SWPOS "Drücken","2POS","3POS","4POS","5POS","6POS","7POS","8POS"
|
|
#define TR_USBJOYSTICK_CH_AXIS "Achse"
|
|
#define TR_VUSBJOYSTICK_CH_AXIS "X","Y","Z","rotX","rotY","rotZ","Schieber","Dial","Rad"
|
|
#define TR_USBJOYSTICK_CH_SIM "Sim Achse"
|
|
#define TR_VUSBJOYSTICK_CH_SIM "Quer","Höhe","Seite","Gas","Beschl.","Bremsen","Lenkung","Dpad"
|
|
#define TR_USBJOYSTICK_CH_INVERSION "Invers"
|
|
#define TR_USBJOYSTICK_CH_BTNNUM "Tastennr."
|
|
#define TR_USBJOYSTICK_BTN_COLLISION "!Tastennr. Kollision!"
|
|
#define TR_USBJOYSTICK_AXIS_COLLISION "!Achsen Kollision!"
|
|
#define TR_USBJOYSTICK_CIRC_COUTOUT TR("Circ. cut", "Circular cutout")
|
|
#define TR_VUSBJOYSTICK_CIRC_COUTOUT "kein","X-Y, Z-rX","X-Y, rX-rY","X-Y, Z-rZ"
|
|
#define TR_USBJOYSTICK_APPLY_CHANGES "Änd. übernehmen"
|
|
|
|
#define TR_DIGITAL_SERVO "Servo333HZ"
|
|
#define TR_ANALOG_SERVO "Servo 50HZ"
|
|
#define TR_SIGNAL_OUTPUT "Signal Ausgang"
|
|
#define TR_SERIAL_BUS "Serialbus"
|
|
#define TR_SYNC "Sync"
|
|
|
|
#define TR_ENABLED_FEATURES "Menüpunkte"
|
|
#define TR_RADIO_MENU_TABS "Sender Menüpunkte"
|
|
#define TR_MODEL_MENU_TABS "Modell Menüpunkte"
|
|
|
|
#define TR_SELECT_MENU_ALL "Alle"
|
|
#define TR_SELECT_MENU_CLR "Löschen"
|
|
#define TR_SELECT_MENU_INV "Invertiert"
|
|
|
|
#define TR_SORT_ORDERS "Name A-Z","Name Z-A","Wenig benutzt","Meist benutzt"
|
|
#define TR_SORT_MODELS_BY "Modelle sortieren nach"
|
|
#define TR_CREATE_NEW "Erstelle"
|
|
|
|
#define TR_MIX_SLOW_PREC TR("Langs. Vorlauf", "Langs. Vor-/Rücklauf")
|
|
#define TR_MIX_DELAY_PREC TR("Delay prec", "Delay up/dn prec")
|
|
|
|
#define TR_THEME_EXISTS "Ein Theme-Verzeichnis mit demselben Namen existiert bereits"
|
|
|
|
#define TR_DATE_TIME_WIDGET "Datum & Uhrzeit"
|
|
#define TR_RADIO_INFO_WIDGET "Fernst. Info"
|
|
#define TR_LOW_BATT_COLOR "Farbe Akku fast leer"
|
|
#define TR_MID_BATT_COLOR "Farbe Akku mittel"
|
|
#define TR_HIGH_BATT_COLOR "Farbe Akku voll"
|
|
|
|
#define TR_WIDGET_SIZE "Widget Größe"
|
|
|
|
#define TR_DEL_DIR_NOT_EMPTY "Directory must be empty before deletion"
|