212 lines
9.1 KiB
C
212 lines
9.1 KiB
C
#ifndef _HAL_
|
|
#define _HAL_
|
|
|
|
/*
|
|
* GPIOS
|
|
*/
|
|
|
|
#define RCC_AHB1Periph_GPIOBUTTON (RCC_AHB1Periph_GPIOA|RCC_AHB1Periph_GPIOB|RCC_AHB1Periph_GPIOC|RCC_AHB1Periph_GPIOD|RCC_AHB1Periph_GPIOE)
|
|
|
|
// Keys
|
|
#define PIN_BUTTON_PLUS GPIO_Pin_10 //SW3 PE.10
|
|
#define PIN_BUTTON_MINUS GPIO_Pin_11 //SW1 PE.12
|
|
#define PIN_BUTTON_ENTER GPIO_Pin_12 //SW2 PE.11
|
|
#define PIN_BUTTON_MENU GPIO_Pin_7 //SW4 PD.07
|
|
#define PIN_BUTTON_PAGE GPIO_Pin_3 //SW6 PD.02
|
|
#define PIN_BUTTON_EXIT GPIO_Pin_2 //SW5 PD.03
|
|
|
|
// Trims
|
|
#define PIN_TRIM_RV_DN GPIO_Pin_3 //PC.03
|
|
#define PIN_TRIM_RV_UP GPIO_Pin_2 //PC.02
|
|
#define PIN_TRIM_RH_L GPIO_Pin_1 //PC.01
|
|
#define PIN_TRIM_RH_R GPIO_Pin_13 //PC.13
|
|
#define PIN_TRIM_LH_R GPIO_Pin_4 //PE.04
|
|
#define PIN_TRIM_LH_L GPIO_Pin_3 //PE.03
|
|
#define PIN_TRIM_LV_DN GPIO_Pin_6 //PE.06
|
|
#define PIN_TRIM_LV_UP GPIO_Pin_5 //PE.05
|
|
|
|
// Switchs
|
|
#define PIN_SW_F GPIO_Pin_14 //PE.14
|
|
#define PIN_SW_E_L GPIO_Pin_3 //PB.03
|
|
#define PIN_SW_E_H GPIO_Pin_4 //PB.04
|
|
#define PIN_SW_B_H GPIO_Pin_5 //PB.05
|
|
#define PIN_SW_B_L GPIO_Pin_6 //PB.06
|
|
#define PIN_SW_A_H GPIO_Pin_7 //PB.07
|
|
#define PIN_SW_A_L GPIO_Pin_2 //PE.02
|
|
#define PIN_SW_G_L GPIO_Pin_0 //PB.00
|
|
#define PIN_SW_G_H GPIO_Pin_5 //PA.05
|
|
#define PIN_SW_C_L GPIO_Pin_7 //PE.07
|
|
#define PIN_SW_C_H GPIO_Pin_1 //PB.01
|
|
#define PIN_SW_D_H GPIO_Pin_9 //PE.09
|
|
#define PIN_SW_D_L GPIO_Pin_8 //PE.08
|
|
#define PIN_SW_H GPIO_Pin_13 //PE.13
|
|
|
|
// ADC
|
|
#define PIN_STK_J1 GPIO_Pin_0 //PA.00
|
|
#define PIN_STK_J2 GPIO_Pin_1 //PA.01
|
|
#define PIN_STK_J3 GPIO_Pin_2 //PA.02
|
|
#define PIN_STK_J4 GPIO_Pin_3 //PA.03
|
|
#define PIN_SLD_J1 GPIO_Pin_4 //PC.04
|
|
#define PIN_SLD_J2 GPIO_Pin_5 //PC.05
|
|
#define PIN_FLP_J1 GPIO_Pin_6 //PA.06
|
|
#define PIN_FLP_J2 GPIO_Pin_7 //PA.07
|
|
#define PIN_MVOLT GPIO_Pin_0 //PC.00
|
|
#define RCC_AHB1Periph_GPIOADC RCC_AHB1Periph_GPIOA | RCC_AHB1Periph_GPIOC
|
|
|
|
// DAC
|
|
#define PIN_AUDIO_DAC GPIO_Pin_4 //PA.04
|
|
|
|
// Power_OFF Delay and LED
|
|
#define PIN_PWR_LED GPIO_Pin_6 //PC.06
|
|
#define PIN_PWR_STATUS GPIO_Pin_1 //PD.01
|
|
#define PIN_MCU_PWR GPIO_Pin_0 //PD.00
|
|
#define RCC_AHB1Periph_GPIOPWR RCC_AHB1Periph_GPIOC | RCC_AHB1Periph_GPIOD
|
|
#define GPIOPWRLED GPIOC
|
|
#define GPIOPWR GPIOD
|
|
|
|
// Smart-Port
|
|
#define PIN_SPORT_ON GPIO_Pin_4 //PD.04
|
|
#define PIN_SPORT_TX GPIO_Pin_5 //PD.05
|
|
#define PIN_SPORT_RX GPIO_Pin_6 //PD.06
|
|
|
|
// Trainer Port
|
|
#define PIN_TR_PPM_IN GPIO_Pin_5 //PC.08
|
|
#define PIN_TR_PPM_OUT GPIO_Pin_9 //PC.09
|
|
|
|
// TODO merge these constants
|
|
#define PIN_PER_3 0x030
|
|
// #define PIN_OS2 0x0000
|
|
#define PIN_OS25 0x2000
|
|
// #define PIN_OS50 0x4000
|
|
// #define PIN_OS100 0x6000
|
|
|
|
// Cppm
|
|
#define RCC_AHB1Periph_GPIOCPPM RCC_AHB1Periph_GPIOA
|
|
#define PIN_CPPM_OUT GPIO_Pin_8 //PA.08
|
|
#define GPIOCPPM GPIOA
|
|
#define GPIO_PinSource_CPPM GPIO_PinSource8
|
|
|
|
// Heart Beat
|
|
#define PIN_HEART_BEAT GPIO_Pin_7 //PC.07
|
|
|
|
// Debug UART
|
|
#define RCC_AHB1Periph_GPIO_UART RCC_AHB1Periph_GPIOB
|
|
#define RCC_APB1Periph_UART_DEBUG RCC_APB1Periph_USART3
|
|
#define GPIO_UART GPIOB
|
|
#define GPIO_PIN_UART_TX GPIO_Pin_10 //PB.10
|
|
#define GPIO_PIN_UART_RX GPIO_Pin_11 //PB.11
|
|
#define GPIO_PinSource_UART_TX GPIO_PinSource10
|
|
#define GPIO_PinSource_UART_RX GPIO_PinSource11
|
|
#define GPIO_AF_UART GPIO_AF_USART3
|
|
#define UART_DEBUG USART3
|
|
|
|
// USB_OTG
|
|
#define PIN_FS_VBUS GPIO_Pin_9 //PA.09
|
|
#define PIN_FS_ID GPIO_Pin_10 //PA.10
|
|
#define PIN_FS_DM GPIO_Pin_11 //PA.11
|
|
#define PIN_FS_DP GPIO_Pin_12 //PA.12
|
|
|
|
// BackLight PB8
|
|
#define RCC_AHB1Periph_GPIOBL RCC_AHB1Periph_GPIOB
|
|
#define GPIO_Pin_BL GPIO_Pin_8 //PB.08
|
|
#define GPIOBL GPIOB
|
|
#define GPIO_PinSource_BL GPIO_PinSource8
|
|
|
|
// LCD GPIOD 10-14
|
|
#define RCC_AHB1Periph_LCD RCC_AHB1Periph_GPIOD
|
|
#define GPIO_LCD GPIOD
|
|
#define PIN_LCD_MOSI GPIO_Pin_10 //PD.10
|
|
#define PIN_LCD_CLK GPIO_Pin_11 //PD.11
|
|
#define PIN_LCD_NCS GPIO_Pin_14 //PD.14
|
|
#define PIN_LCD_A0 GPIO_Pin_13 //PD.13
|
|
#define PIN_LCD_RST //GPIO_Pin_12 //pd12 test //RESET occurs when powered up,but should delay before initialize
|
|
|
|
// Audio - I2S3
|
|
#define CODEC_I2S SPI3
|
|
#define CODEC_I2S_CLK RCC_APB1Periph_SPI3
|
|
#define CODEC_I2S_GPIO_AF GPIO_AF_SPI3
|
|
#define CODEC_I2S_IRQ SPI3_IRQn
|
|
#define CODEC_I2S_GPIO_CLOCK (RCC_AHB1Periph_GPIOA | RCC_AHB1Periph_GPIOC )//| RCC_AHB1Periph_GPIOE)
|
|
#define CODEC_I2S_WS_PIN GPIO_Pin_15 //PA.15
|
|
#define CODEC_I2S_SCK_PIN GPIO_Pin_10 //PC.10
|
|
#define CODEC_I2S_SD_PIN GPIO_Pin_12 //PC.12
|
|
#define CODEC_I2S_MCK_PIN GPIO_Pin_6 //DISABLED
|
|
#define CODEC_I2S_WS_PINSRC GPIO_PinSource15
|
|
#define CODEC_I2S_SCK_PINSRC GPIO_PinSource10
|
|
#define CODEC_I2S_SD_PINSRC GPIO_PinSource12
|
|
#define CODEC_I2S_MCK_PINSRC GPIO_PinSource6
|
|
#define CODEC_I2S_GPIO GPIOC
|
|
#define CODEC_I2S_MCK_GPIO GPIOC
|
|
#define CODEC_I2S_WS_GPIO GPIOA
|
|
#define CODEC_I2S_MUTE GPIO_Pin_11 //PC.11
|
|
//#define CODEC_I2S_FLT GPIO_Pin_ //IIR/FIR
|
|
//#define CODEC_I2S_MODE GPIO_Pin_ //Connect to GND=I2S_STANDARD
|
|
|
|
// Eeprom 5137
|
|
#define I2C_EE_GPIO GPIOE
|
|
#define I2C_EE_WP_GPIO GPIOB
|
|
#define I2C_EE_GPIO_CLK RCC_AHB1Periph_GPIOB | RCC_AHB1Periph_GPIOE
|
|
#define I2C_EE_SCL GPIO_Pin_1 //PE1
|
|
#define I2C_EE_SDA GPIO_Pin_0 //PE0
|
|
#define I2C_EE_WP GPIO_Pin_9 //PB9
|
|
|
|
// SD - SPI2
|
|
#define SPI_SD SPI2
|
|
#define GPIO_AF_SD GPIO_AF_SPI2
|
|
#define RCC_AHB1Periph_GPIO_CS RCC_AHB1Periph_GPIOB
|
|
#define GPIO_SPI_SD GPIOB
|
|
#define GPIO_Pin_SPI_SD_CS GPIO_Pin_12 //PB.12
|
|
#define GPIO_Pin_SPI_SD_SCK GPIO_Pin_13 //PB.13
|
|
#define GPIO_Pin_SPI_SD_MISO GPIO_Pin_14 //PB.14
|
|
#define GPIO_Pin_SPI_SD_MOSI GPIO_Pin_15 //PB.15
|
|
#define GPIO_PinSource_CS GPIO_PinSource12
|
|
#define GPIO_PinSource_SCK GPIO_PinSource13
|
|
#define GPIO_PinSource_MISO GPIO_PinSource14
|
|
#define GPIO_PinSource_MOSI GPIO_PinSource15
|
|
#define RCC_APBPeriphClockCmd_SPI_SD RCC_APB1PeriphClockCmd
|
|
#define RCC_APBPeriph_SPI_SD RCC_APB1Periph_SPI2
|
|
#define RCC_AHBxPeriph_GPIO_WP RCC_AHB1Periph_GPIOD
|
|
#define RCC_AHBxPeriph_GPIO_CP RCC_AHB1Periph_GPIOD
|
|
#define GPIO_Mode_WP GPIO_Mode_OUT//lock?
|
|
#define GPIO_Mode_CP GPIO_Mode_IN //
|
|
#define GPIO_Pin_WP GPIO_Pin_8 //PD.08
|
|
#define GPIO_Pin_CP GPIO_Pin_9 //PD.09
|
|
#define GPIO_CTL_SD GPIOD
|
|
|
|
// Audio----I2S3-----SPI3
|
|
#define CODEC_MCLK_DISABLED
|
|
#define CODEC_USE_INT
|
|
//#define CODEC_USE_DMA
|
|
#define AudioFreq I2S_AudioFreq_44k
|
|
|
|
// EEPROM and CAT5137
|
|
#define I2C_Speed 200000
|
|
#define I2C_FLASH_PAGESIZE 64
|
|
#define I2C_EEPROM_ADDRESS 0xA2
|
|
#define I2C_CAT5137_ADDRESS 0x5C //0101110
|
|
|
|
// SD card----SPI2
|
|
// demo uses a command line option to define this (see Makefile):
|
|
// #define STM32_SD_USE_DMA
|
|
#ifdef STM32_SD_USE_DMA
|
|
// #warning "Information only: using DMA"
|
|
#pragma message "*** Using DMA ***"
|
|
#endif
|
|
|
|
/* set to 1 to provide a disk_ioctrl function even if not needed by the FatFs */
|
|
#define STM32_SD_DISK_IOCTRL_FORCE (0)
|
|
#define CARD_SUPPLY_SWITCHABLE (0) // power on not depend any IO
|
|
#define SOCKET_WP_CONNECTED (0)
|
|
#define SOCKET_CP_CONNECTED (0)
|
|
|
|
#define SPI_BaudRatePrescaler_SPI_SD SPI_BaudRatePrescaler_2 // - for SPI2 and full-speed APB1: 30MHz/2 =15MHZ < 20MHZ
|
|
|
|
// Selectable
|
|
// DMA
|
|
#define DMA_Channel_SPI_SD_RX DMA1_Channel2
|
|
#define DMA_Channel_SPI_SD_TX DMA1_Channel3
|
|
#define DMA_FLAG_SPI_SD_TC_RX DMA1_FLAG_TC2
|
|
#define DMA_FLAG_SPI_SD_TC_TX DMA1_FLAG_TC3
|
|
|
|
#endif
|