Files
edgetx-gx12/radio/src/trainer.cpp
T
Raphael CoefficandGitHub 72193eda82 chore: New module/serial API (#3055)
* WiP: new module interface

* WiP: softserial timer DMA

* WiP: setup() and send() in one step

and remove methods specific to internal or external module

* fixes and extra port config

* horus targets

* module ports have moved

* T8 support (only internal module)

* fix nv14

* stupid GCC....

* disable BT

* remove nv14 telem driver

* remove old aux serial driver

* Move module buffers out of pulses.h

* Soft serial fixes and PXX1 support

* Fixed PPM module output

* Fixed CLI

* compilation fixes

* Ported bluetooth and flysky gimbal to new serial driver

* Re-enable soft-serial RX

* fixes and cleanup

* nv14 fixes

* Fix flysky gimbals

* Ghost module

* 16 bytes of RAM

* Remove getByte from module API

* Ghost cleanup

* fix: _half_duplex_input() must be called after usart init

* WiP

* more cleanup

* Remove board specific settings from PXX1 / PXX2 drivers

* A bit of PXX2 header cleanup

* Add support for OVER8 and ONEBIT

* Add some support for inverters (NV14 / EL18)

* Support NV14 power fixes in generic board

* Fix polarity handling

* Fix RX DMA

* Fix mixer not running

* Add soft-serial polarity control

* Quick fix for telemetry polling while module port is changed

* Fix bootloader DEBUG

* Fix MPM telemetry

* Fix pulse start

* DSM2 soft-serial fallback

* DSMP async module restart

* Fix CRSF LUA upstream

* Remove global variable telemetryProtocol

* Use HAL/LL constants

* Fix various issue with AFHDS3 and NV14/EL18 internal module

* Fixed S.PORT unit tests

* fix: update widx after writing at current index

* fix: init error condition

* Fix: possible infinite loop in _find_port()

* Add support for bidir S.PORT init

* Add support for "getLastByte" in HW serial driver

* PXX1: Add support for S.PORT based on IDLE callback

* Fix rebase error

* Fix softserial _rx_fifo_push()

* Add softserial support for waitForTxCompleted()

* Fix MPM flashing (internal / external)

* Fixed external MPM

* Activate RX DMA on internal module

Seems to work with serial passthrough without issues, at least on the L3R PRO.

* Fix softserial DMA on stdlcd F4 targets

* Add softserial support for 32bit timers (mostly TIM2)

* More precise soft-serial

* Fix MPM update using inverters & HW uart

* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input

* Remove useless delays

* Fix flashing external ELRS module

* Added a retry mechanism for FrSky S.PORT update

* Remove useless enableRx()

* External FrSky modules are all flashed via S.PORT

* Remove power management unit update

This was only used on the first batch of X-lite.
2023-02-09 19:44:32 +10:00

157 lines
4.1 KiB
C++

/*
* Copyright (C) EdgeTX
*
* Based on code named
* opentx - https://github.com/opentx/opentx
* th9x - http://code.google.com/p/th9x
* er9x - http://code.google.com/p/er9x
* gruvin9x - http://code.google.com/p/gruvin9x
*
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "opentx.h"
#include "hal/trainer_driver.h"
#include "heartbeat_driver.h"
int16_t ppmInput[MAX_TRAINER_CHANNELS];
uint8_t ppmInputValidityTimer;
uint8_t currentTrainerMode = 0xff;
enum {
TRAINER_NOT_CONNECTED = 0,
TRAINER_CONNECTED,
TRAINER_DISCONNECTED,
TRAINER_RECONNECTED
};
uint8_t trainerStatus = TRAINER_NOT_CONNECTED;
void checkTrainerSignalWarning()
{
enum {
PPM_IN_IS_NOT_USED = 0,
PPM_IN_IS_VALID,
PPM_IN_INVALID
};
static uint8_t ppmInputValidState = PPM_IN_IS_NOT_USED;
if (ppmInputValidityTimer && (ppmInputValidState == PPM_IN_IS_NOT_USED)) {
ppmInputValidState = PPM_IN_IS_VALID;
trainerStatus = TRAINER_CONNECTED;
AUDIO_TRAINER_CONNECTED();
}
else if (!ppmInputValidityTimer && (ppmInputValidState == PPM_IN_IS_VALID)) {
ppmInputValidState = PPM_IN_INVALID;
trainerStatus = TRAINER_DISCONNECTED;
AUDIO_TRAINER_LOST();
}
else if (ppmInputValidityTimer && (ppmInputValidState == PPM_IN_INVALID)) {
ppmInputValidState = PPM_IN_IS_VALID;
trainerStatus = TRAINER_RECONNECTED;
AUDIO_TRAINER_BACK();
}
}
void stopTrainer()
{
switch (currentTrainerMode) {
case TRAINER_MODE_MASTER_TRAINER_JACK:
stop_trainer_capture();
break;
case TRAINER_MODE_SLAVE:
stop_trainer_ppm();
break;
#if defined(SBUS_TRAINER)
case TRAINER_MODE_MASTER_SERIAL:
sbusSetGetByte(nullptr);
break;
#endif
#if defined(TRAINER_MODULE_CPPM)
case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE:
stop_trainer_module_cppm();
break;
#endif
#if defined(TRAINER_MODULE_SBUS)
case TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE:
sbusSetGetByte(nullptr);
stop_trainer_module_sbus();
break;
#endif
}
#if defined(INTMODULE_HEARTBEAT_GPIO) && !defined(SIMU) && \
(defined(TRAINER_MODULE_CPPM) || defined(TRAINER_MODULE_SBUS))
if ((currentTrainerMode == TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE ||
currentTrainerMode == TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE)
&& (isModulePXX2(INTERNAL_MODULE) || isModulePXX1(INTERNAL_MODULE))) {
init_intmodule_heartbeat();
}
#endif
currentTrainerMode = 0xFF;
}
void checkTrainerSettings()
{
uint8_t requiredTrainerMode = g_model.trainerData.mode;
if (requiredTrainerMode != currentTrainerMode) {
if (currentTrainerMode != 0xFF) {
stopTrainer();
}
currentTrainerMode = requiredTrainerMode;
switch (requiredTrainerMode) {
case TRAINER_MODE_MASTER_TRAINER_JACK:
init_trainer_capture();
break;
case TRAINER_MODE_SLAVE:
init_trainer_ppm();
break;
#if defined(SBUS_TRAINER)
case TRAINER_MODE_MASTER_SERIAL:
sbusSetGetByte(sbusAuxGetByte);
break;
#endif
#if defined(TRAINER_MODULE_CPPM)
case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE:
init_trainer_module_cppm();
break;
#endif
#if defined(TRAINER_MODULE_SBUS)
case TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE:
init_trainer_module_sbus();
sbusSetGetByte(trainerModuleSbusGetByte);
break;
#endif
}
#if defined(INTMODULE_HEARTBEAT_GPIO) && !defined(SIMU) && \
(defined(TRAINER_MODULE_CPPM) || defined(TRAINER_MODULE_SBUS))
if (requiredTrainerMode == TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE ||
requiredTrainerMode == TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE) {
stop_intmodule_heartbeat();
}
#endif
}
}