* WiP: new module interface * WiP: softserial timer DMA * WiP: setup() and send() in one step and remove methods specific to internal or external module * fixes and extra port config * horus targets * module ports have moved * T8 support (only internal module) * fix nv14 * stupid GCC.... * disable BT * remove nv14 telem driver * remove old aux serial driver * Move module buffers out of pulses.h * Soft serial fixes and PXX1 support * Fixed PPM module output * Fixed CLI * compilation fixes * Ported bluetooth and flysky gimbal to new serial driver * Re-enable soft-serial RX * fixes and cleanup * nv14 fixes * Fix flysky gimbals * Ghost module * 16 bytes of RAM * Remove getByte from module API * Ghost cleanup * fix: _half_duplex_input() must be called after usart init * WiP * more cleanup * Remove board specific settings from PXX1 / PXX2 drivers * A bit of PXX2 header cleanup * Add support for OVER8 and ONEBIT * Add some support for inverters (NV14 / EL18) * Support NV14 power fixes in generic board * Fix polarity handling * Fix RX DMA * Fix mixer not running * Add soft-serial polarity control * Quick fix for telemetry polling while module port is changed * Fix bootloader DEBUG * Fix MPM telemetry * Fix pulse start * DSM2 soft-serial fallback * DSMP async module restart * Fix CRSF LUA upstream * Remove global variable telemetryProtocol * Use HAL/LL constants * Fix various issue with AFHDS3 and NV14/EL18 internal module * Fixed S.PORT unit tests * fix: update widx after writing at current index * fix: init error condition * Fix: possible infinite loop in _find_port() * Add support for bidir S.PORT init * Add support for "getLastByte" in HW serial driver * PXX1: Add support for S.PORT based on IDLE callback * Fix rebase error * Fix softserial _rx_fifo_push() * Add softserial support for waitForTxCompleted() * Fix MPM flashing (internal / external) * Fixed external MPM * Activate RX DMA on internal module Seems to work with serial passthrough without issues, at least on the L3R PRO. * Fix softserial DMA on stdlcd F4 targets * Add softserial support for 32bit timers (mostly TIM2) * More precise soft-serial * Fix MPM update using inverters & HW uart * Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input * Remove useless delays * Fix flashing external ELRS module * Added a retry mechanism for FrSky S.PORT update * Remove useless enableRx() * External FrSky modules are all flashed via S.PORT * Remove power management unit update This was only used on the first batch of X-lite.
191 lines
5.0 KiB
C++
191 lines
5.0 KiB
C++
/*
|
|
* Copyright (C) EdgeTX
|
|
*
|
|
* Based on code named
|
|
* opentx - https://github.com/opentx/opentx
|
|
* th9x - http://code.google.com/p/th9x
|
|
* er9x - http://code.google.com/p/er9x
|
|
* gruvin9x - http://code.google.com/p/gruvin9x
|
|
*
|
|
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "flysky_gimbal_driver.h"
|
|
#include "stm32_serial_driver.h"
|
|
#include "delays_driver.h"
|
|
|
|
#include "hal.h"
|
|
#include "crc.h"
|
|
|
|
#include <string.h>
|
|
|
|
static const stm32_usart_t fsUSART = {
|
|
.USARTx = FLYSKY_HALL_SERIAL_USART,
|
|
.GPIOx = FLYSKY_HALL_SERIAL_GPIO,
|
|
.GPIO_Pin = FLYSKY_HALL_SERIAL_RX_GPIO_PIN,
|
|
.IRQn = FLYSKY_HALL_SERIAL_USART_IRQn,
|
|
.IRQ_Prio = 6,
|
|
.txDMA = nullptr,
|
|
.txDMA_Stream = 0,
|
|
.txDMA_Channel = 0,
|
|
.rxDMA = FLYSKY_HALL_SERIAL_DMA,
|
|
.rxDMA_Stream = FLYSKY_HALL_DMA_Stream_RX,
|
|
.rxDMA_Channel = FLYSKY_HALL_DMA_Channel,
|
|
};
|
|
|
|
DEFINE_STM32_SERIAL_PORT(FSGimbal, fsUSART, HALLSTICK_BUFF_SIZE, 0);
|
|
|
|
static STRUCT_HALL HallProtocol = { 0 };
|
|
|
|
signed short hall_raw_values[FLYSKY_HALL_CHANNEL_COUNT];
|
|
unsigned short hall_adc_values[FLYSKY_HALL_CHANNEL_COUNT];
|
|
|
|
static void* _fs_usart_ctx = nullptr;
|
|
|
|
uint16_t get_flysky_hall_adc_value(uint8_t ch)
|
|
{
|
|
if (ch >= FLYSKY_HALL_CHANNEL_COUNT) {
|
|
return 0;
|
|
}
|
|
|
|
return 2 * FLYSKY_OFFSET_VALUE - hall_adc_values[ch];
|
|
}
|
|
|
|
static int _fs_get_byte(uint8_t* data)
|
|
{
|
|
return STM32SerialDriver.getByte(_fs_usart_ctx, data);
|
|
}
|
|
|
|
static void _fs_parse(STRUCT_HALL *hallBuffer, unsigned char ch)
|
|
{
|
|
switch (hallBuffer->status) {
|
|
case GET_START:
|
|
if (FLYSKY_HALL_PROTOLO_HEAD == ch) {
|
|
hallBuffer->head = FLYSKY_HALL_PROTOLO_HEAD;
|
|
hallBuffer->status = GET_ID;
|
|
hallBuffer->msg_OK = 0;
|
|
}
|
|
break;
|
|
|
|
case GET_ID:
|
|
hallBuffer->hallID.ID = ch;
|
|
hallBuffer->status = GET_LENGTH;
|
|
break;
|
|
|
|
case GET_LENGTH:
|
|
hallBuffer->length = ch;
|
|
hallBuffer->dataIndex = 0;
|
|
hallBuffer->status = GET_DATA;
|
|
if (0 == hallBuffer->length) {
|
|
hallBuffer->status = GET_CHECKSUM;
|
|
hallBuffer->checkSum = 0;
|
|
}
|
|
break;
|
|
|
|
case GET_DATA:
|
|
hallBuffer->data[hallBuffer->dataIndex++] = ch;
|
|
if (hallBuffer->dataIndex >= hallBuffer->length) {
|
|
hallBuffer->checkSum = 0;
|
|
hallBuffer->dataIndex = 0;
|
|
hallBuffer->status = GET_STATE;
|
|
}
|
|
break;
|
|
|
|
case GET_STATE:
|
|
hallBuffer->checkSum = 0;
|
|
hallBuffer->dataIndex = 0;
|
|
hallBuffer->status = GET_CHECKSUM;
|
|
// fall through!
|
|
|
|
case GET_CHECKSUM:
|
|
hallBuffer->checkSum |= ch << ((hallBuffer->dataIndex++) * 8);
|
|
if (hallBuffer->dataIndex >= 2) {
|
|
hallBuffer->dataIndex = 0;
|
|
hallBuffer->status = CHECKSUM;
|
|
// fall through!
|
|
} else {
|
|
break;
|
|
}
|
|
|
|
case CHECKSUM:
|
|
if (hallBuffer->checkSum ==
|
|
crc16(CRC_1021, &hallBuffer->head, hallBuffer->length + 3, 0xffff)) {
|
|
hallBuffer->msg_OK = 1;
|
|
}
|
|
hallBuffer->status = GET_START;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static volatile bool _fs_gimbal_detected;
|
|
|
|
static void flysky_gimbal_loop()
|
|
{
|
|
uint8_t byte;
|
|
|
|
while(_fs_get_byte(&byte))
|
|
{
|
|
HallProtocol.index++;
|
|
|
|
_fs_parse(&HallProtocol, byte);
|
|
if ( HallProtocol.msg_OK )
|
|
{
|
|
HallProtocol.msg_OK = 0;
|
|
HallProtocol.stickState = HallProtocol.data[HallProtocol.length - 1];
|
|
|
|
switch ( HallProtocol.hallID.hall_Id.receiverID )
|
|
{
|
|
case TRANSFER_DIR_TXMCU:
|
|
if(HallProtocol.hallID.hall_Id.packetID == FLYSKY_HALL_RESP_TYPE_VALUES) {
|
|
memcpy(hall_raw_values, HallProtocol.data, sizeof(hall_raw_values));
|
|
for ( uint8_t channel = 0; channel < 4; channel++ )
|
|
{
|
|
hall_adc_values[channel] = FLYSKY_OFFSET_VALUE + hall_raw_values[channel];
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
_fs_gimbal_detected = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void flysky_gimbal_deinit()
|
|
{
|
|
STM32SerialDriver.deinit(_fs_usart_ctx);
|
|
}
|
|
|
|
bool flysky_gimbal_init()
|
|
{
|
|
etx_serial_init cfg = {
|
|
.baudrate = FLYSKY_HALL_BAUDRATE,
|
|
.encoding = ETX_Encoding_8N1,
|
|
.direction = ETX_Dir_RX,
|
|
.polarity = ETX_Pol_Normal,
|
|
};
|
|
|
|
_fs_gimbal_detected = false;
|
|
_fs_usart_ctx = STM32SerialDriver.init(REF_STM32_SERIAL_PORT(FSGimbal), &cfg);
|
|
STM32SerialDriver.setIdleCb(_fs_usart_ctx, flysky_gimbal_loop);
|
|
|
|
// Wait 70ms for FlySky gimbals to respond. According to LA trace, minimally 23ms is required
|
|
for (uint8_t i = 0; i < 70; i++) {
|
|
delay_ms(1);
|
|
if (_fs_gimbal_detected) {
|
|
return true;
|
|
}
|
|
}
|
|
|
|
flysky_gimbal_deinit();
|
|
return false;
|
|
}
|