hi3516ev200: add GARUS GSL-5030X-30AP-NM device profile (SC2315E, 8M NOR, Ethernet only)
Device profile for GARUS GSL-5030X-30AP-NM on PCB BLK16EV2-4339P-38X38: Hi3516EV200, 8 MiB SPI NOR, wired Ethernet, fixed lens, no radio. Sensor path is SC2315E-compatible MIPI at 1920x1080. The stock firmware's 2304x1296 "3M" mode is an output scaling path; no native 3MP sensor mode was confirmed, so the profile keeps the proven 1080p mode. The physical die is unidentified — XM documentation points at SC4239H, which has no OpenIPC driver path — so the README row carries SC2315E? deliberately. Day/night uses GPIO15 as the hardware status input with a bistable IR-cut filter on GPIO8/GPIO9. GPIO15 needs its EV200 pinmux reasserted on every boot, so that read-modify-write lives in muxes.sh, which S30customizer runs each boot, rather than in the once-only customizer.sh. transitionDelayMs is 150, measured on this camera: an immediate transition showed a purple cast while the filter was still moving. The exclude list prunes 33 of the 34 sensor drivers the Hi3516EV200 packages install, leaving libsns_sc2315e.so, and keeps iq/imx307.ini so the default.ini symlink still resolves. Codec and fps are left unset because h264 at 20 fps are already the shipped majestic defaults for this SoC and variant. Built, flashed and booted on hardware: 1080p video and RTSP, H.264 and H.265, Ethernet, microphone capture and speaker output, and automatic day/night switching with IR-cut operation.
This commit is contained in:
@@ -30,6 +30,7 @@ Cootli CAMV0103 GK7202V300 SC223A SSV6355_USB NOR_8M in pr
|
||||
CP Plus CP-UNC-TA21L2C GK7205V200 SC223A - NOR_16M video-ok, ir-cut-no, audio-no
|
||||
Emax Wyvern Link SSC338Q IMX415 NOR_16M done
|
||||
Foscam X5 SSC337DE GC4653 RTL8188FU_USB NOR_16M done
|
||||
GARUS GSL-5030X-30AP-NM HI3516EV200 SC2315E? - NOR_8M done
|
||||
G.Craftsman GCA50 T31ZX GC4653 - NOR_16M done
|
||||
EC37-T11 T20L SC2232 RTL8188FU_USB MOR_16M in progress
|
||||
H3C TC2101 SSC337 JXQ03 RTL8188FU_USB NOR_16M done
|
||||
|
||||
Reference in New Issue
Block a user