#!/bin/sh # KC110 pad-pinmux: chip7/8 GPIOs used by pan motor + IR-cut + IR-LED # need function=0x1 (per vendor hn_config.sh comments "GPIO8_0", "GPIO8_1"). # OpenIPC kernel pinctrl leaves them at default (0x0 = alternate peripheral) # which makes PL061 GPIODATA writes succeed silently — pad never toggles. # Stock-OpenIPC builds (and prior boot residue) can also leave wrong state # across soft-reboot, so we force-write here regardless of current value. start() { # pan motor coils B/C/D (chip7 pin 2/3/4) + IR-LED (chip7 pin 7) devmem 0x200f00e8 32 0x1 devmem 0x200f00ec 32 0x1 devmem 0x200f00f0 32 0x1 devmem 0x200f00fc 32 0x1 # IR-cut solenoid (chip8 pin 0) + pan motor coil A (chip8 pin 1) devmem 0x200f0100 32 0x1 devmem 0x200f0104 32 0x1 } case "$1" in start|"") start ;; stop) ;; restart|reload) start ;; *) echo "usage: $0 {start|stop|restart}"; exit 1 ;; esac exit 0