ArthurKobaandGitHub
a93762ee27
Device profile for GARUS GSL-5030X-30AP-NM on PCB BLK16EV2-4339P-38X38: Hi3516EV200, 8 MiB SPI NOR, wired Ethernet, fixed lens, no radio. Sensor path is SC2315E-compatible MIPI at 1920x1080. The stock firmware's 2304x1296 "3M" mode is an output scaling path; no native 3MP sensor mode was confirmed, so the profile keeps the proven 1080p mode. The physical die is unidentified — XM documentation points at SC4239H, which has no OpenIPC driver path — so the README row carries SC2315E? deliberately. Day/night uses GPIO15 as the hardware status input with a bistable IR-cut filter on GPIO8/GPIO9. GPIO15 needs its EV200 pinmux reasserted on every boot, so that read-modify-write lives in muxes.sh, which S30customizer runs each boot, rather than in the once-only customizer.sh. transitionDelayMs is 150, measured on this camera: an immediate transition showed a purple cast while the filter was still moving. The exclude list prunes 33 of the 34 sensor drivers the Hi3516EV200 packages install, leaving libsns_sc2315e.so, and keeps iq/imx307.ini so the default.ini symlink still resolves. Codec and fps are left unset because h264 at 20 fps are already the shipped majestic defaults for this SoC and variant. Built, flashed and booted on hardware: 1080p video and RTSP, H.264 and H.265, Ethernet, microphone capture and speaker output, and automatic day/night switching with IR-cut operation.
3 lines
117 B
Plaintext
3 lines
117 B
Plaintext
# GARUS GSL-5030X-30AP-NM has no removable storage.
|
|
# Override the common vfat/exfat module list; load nothing here.
|