OpenOCD st-link config files now saved on git

radio/src/targets/stlink-v2.cfg

@@ -0,0 +1,9 @@
+#
+# STMicroelectronics ST-LINK/V2 in-circuit debugger/programmer
+#
+
+interface hla
+hla_layout stlink
+hla_device_desc "ST-LINK/V2"
+hla_vid_pid 0x0483 0x3748
+

radio/src/targets/stm32f2x_stlink.cfg

@@ -0,0 +1,20 @@
+#
+# STM32f2x stlink pseudo target
+#
+
+if { [info exists CHIPNAME] == 0 } {
+   set CHIPNAME stm32f2x
+}
+
+if { [info exists CPUTAPID] == 0 } {
+   set CPUTAPID 0x2ba01477
+}
+
+if { [info exists WORKAREASIZE] == 0 } {
+   set WORKAREASIZE 0x10000
+}
+
+source [find stm32_stlink.cfg]
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME

radio/src/targets/stm32f4x_stlink.cfg

@@ -0,0 +1,42 @@
+################################################################################
+##
+## Copyright (C) 2008-2012 The openOCD Project <http://openocd.sourceforge.net>
+##
+## This file is part of openOCD.
+##
+## openOCD is free software; you can redistribute it and/or modify it
+## under the terms of the GNU General Public License as published by the Free
+## Software Foundation; either version 2 of the License, or (at your option)
+## any later version.
+##
+## openOCD is distributed in the hope that it will be useful, but WITHOUT ANY
+## WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+## FOR A PARTICULAR PURPOSE. See the GNU General Public License for more 
+## details.
+##
+## You should have received a copy of the GNU General Public License along with
+## this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+## Place, Suite 330, Boston, MA  02111-1307  USA
+##
+################################################################################
+#
+# STM32f4x stlink pseudo target
+#
+
+if { [info exists CHIPNAME] == 0 } {
+   set CHIPNAME stm32f4x
+}
+
+if { [info exists CPUTAPID] == 0 } {
+   set CPUTAPID 0x2ba01477
+}
+
+if { [info exists WORKAREASIZE] == 0 } {
+   set WORKAREASIZE 0x10000
+}
+
+source [find target/stm32_stlink.cfg]
+
+# stm32f4x family uses stm32f2x driver
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME