[X9D] Backlight support on simu

src/eeprom_arm.cpp

@@ -66,7 +66,7 @@ struct t_file_entry File_system[MAX_MODELS+1] ;
 char ModelNames[MAX_MODELS][sizeof(g_model.name)] ;		// Allow for general
 
 // TODO check everything here
-uint8_t	Eeprom32_process_state ;
+uint8_t	Eeprom32_process_state = E32_IDLE;
 uint8_t	Eeprom32_state_after_erase ;
 uint8_t	Eeprom32_write_pending ;
 uint8_t Eeprom32_file_index ;
@@ -449,8 +449,18 @@ void ee32LoadModelName(uint8_t id, char *buf, uint8_t len)
   }
 }
 
+void fill_file_index()
+{
+  for (uint32_t i = 0 ; i < MAX_MODELS + 1 ; i += 1 )
+  {
+    File_system[i].block_no = get_current_block_number( i * 2, &File_system[i].size, &File_system[i].sequence_no ) ;
+  }
+}
+
 void eeReadAll()
 {
+  fill_file_index() ;
+
   if (!eeLoadGeneral() )
   {
     generalDefault();
@@ -677,14 +687,6 @@ void ee32_process()
   }
 }
 
-void fill_file_index()
-{
-  for (uint32_t i = 0 ; i < MAX_MODELS + 1 ; i += 1 )
-  {
-    File_system[i].block_no = get_current_block_number( i * 2, &File_system[i].size, &File_system[i].sequence_no ) ;
-  }
-}
-
 void ee32_read_model_names()
 {
   for (uint32_t i=0; i<MAX_MODELS; i++)
@@ -693,15 +695,6 @@ void ee32_read_model_names()
   }
 }
 
-void eeprom_init()
-{
-#ifndef SIMU
-  init_spi();
-#endif
-  fill_file_index() ;
-  Eeprom32_process_state = E32_IDLE ;
-}
-
 #if defined(SDCARD)
 const pm_char * eeBackupModel(uint8_t i_fileSrc)
 {

src/eeprom_arm.h

@@ -44,7 +44,6 @@ extern uint8_t *Eeprom32_source_address ;
 extern uint8_t Eeprom32_file_index ;
 extern uint32_t Eeprom32_data_size ;
 
-extern void eeprom_init( void ) ;
 extern void end_spi(); // TODO not public
 extern void ee32_process( void ) ;
 extern bool eeLoadGeneral( void ) ;

src/simpgmspace.cpp

@@ -318,10 +318,6 @@ void *main_thread(void *)
     g_menuStack[0] = menuMainView;
     g_menuStack[1] = menuModelSelect;
 
-#if defined(CPUARM)
-    eeprom_init();
-#endif
-
     eeReadAll(); //load general setup and selected model
 
     if (g_eeGeneral.backlightMode != e_backlight_mode_off) backlightOn(); // on Tx start turn the light on

src/simpgmspace.h

@@ -345,8 +345,9 @@ void eeprom_read_block (void *pointer_ram,
 
 #if defined(PCBX9D) || defined(PCBACT)
 inline void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) { }
-#define GPIO_SetBits(...)
-#define GPIO_ResetBits(...)
+#define GPIO_SetBits(GPIOx, pin) GPIOx->BSRRL |= pin
+#define GPIO_ResetBits(GPIOx, pin) GPIOx->BSRRL &= ~pin
+#define GPIO_IsSet(GPIOx, pin) (GPIOx->BSRRL & pin)
 #define RCC_AHB1PeriphClockCmd(...)
 #define GPIO_ReadInputDataBit(...) true
 #endif

src/sky9x/board_sky9x.cpp

@@ -686,7 +686,7 @@ void boardInit()
 
   codecsInit();
 
-  eeprom_init();
+  eepromInit();
 
   init_rotary_encoder();
 

src/sky9x/eeprom_driver.cpp

@@ -194,7 +194,7 @@ uint32_t eeprom_read_status()
 // MOSI PA13 (peripheral A)
 // SCK  PA14 (peripheral A)
 // Set clock to 3 MHz, AT25 device is rated to 70MHz, 18MHz would be better
-void init_spi()
+void eepromInit()
 {
   register Spi *spiptr ;
   register uint32_t timer ;

src/x9d/Macro_define.h

@@ -1,27 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Macro_define.h 
-  * @author  X9D Application Team
-  * @Hardware version V0.2
-  * @date    11-July-2012
-  * @brief   This file provides Macro defines for testing or working.
-  * *
-  ******************************************************************************
-*/
-#ifndef _Macro_Define_H_
-#define _Macro_Define_H_
-#include "stm32f2xx.h"
-
-#define assert(x)	do{ if(!(x)) while(1);}while(0);
-
-#define	udelay(x)	do{	uint32_t temp;	temp=((x+0)<<3);	while(--temp);}while(0)	
-#define delayUsec(x)	udelay(x)
-
-#define LCD_TEST
-#define AUDIO_TEST
-//#define I2C_TEST
-//#define ADC_TEST
-
-
-
-#endif

src/x9d/board_x9d.h

@@ -109,6 +109,9 @@ uint32_t check_soft_power();
 #define setBacklight(xx)
 #define __BACKLIGHT_ON    GPIO_SetBits(GPIOB, GPIO_Pin_BL)
 #define __BACKLIGHT_OFF   GPIO_ResetBits(GPIOB, GPIO_Pin_BL)
-#define IS_BACKLIGHT_ON() (GPIOB & GPIO_Pin_BL)
+#define IS_BACKLIGHT_ON() GPIO_IsSet(GPIOB, GPIO_Pin_BL)
+
+#define udelay(x)       do { uint32_t temp; temp=((x+0)<<3); while(--temp); } while (0)
+#define delayUsec(x)    udelay(x)
 
 #endif

src/x9d/eeprom_driver.cpp

@@ -33,8 +33,11 @@
 
 #include "../open9x.h"
 
-void init_spi()
+void eepromInit()
 {
+#if !defined(SIMU)
+  I2C_EE_Init();
+#endif
 }
 
 void eeprom_write_enable()

src/x9d/i2c_ee.c

@@ -10,10 +10,7 @@
   ******************************************************************************
 */
 
-/* Includes ------------------------------------------------------------------*/
-#include "i2c_ee.h"
-#include "hal.h"
-#include "Macro_define.h" 
+#include "../open9x.h"
 
 uint16_t EEPROM_ADDRESS;
 
@@ -136,11 +133,11 @@ void I2C_SEND_DATA(char SendByte)
   while (i--) {
     SCL_L;
     I2C_delay();
-    if (SendByte&0x80)
+    if (SendByte & 0x80)
       SDA_H;
     else
       SDA_L;
-    SendByte<<=1;
+    SendByte <<= 1;
     I2C_delay();
     SCL_H;
     I2C_delay();