TELEMETRY_MOD=14051_SWAPPED
TELEMETRY_MOD=14051 (by gerardv @ forum.turnigy9xr.com) makes USART0 available by reallocating AIL and THR onto pins 14 and 15 of the 14051 multiplexer. TELEMETRY_MOD=14051_SWAPPED is based on TELEMETRY_MOD=14051, but uses USART1 instead of USART0, freeing USART0 for other purposes (debugging, interfacing via AVRISP port). USART1 is freed up by reallocating LVert Trim Dn/Up onto 14051's 12 and 1 pins respectively. Additionally, this commit cleans a few things up: * moves AVR ADC-related code to adc_driver.cpp, * provides #defines to have a convenient way to access either USART0 or USART1 registers depending on static (build-time) configuration * moves code related to this telemetry mod to board_stock * replaces a few magic numbers with enums. Thanks to Bernard Songis for review and suggestions!
This commit is contained in:
@@ -53,9 +53,7 @@ inline void boardInit()
|
||||
DDRK = 0b00000000; PORTK = 0b00000000; // Analogic input (no pull-ups)
|
||||
DDRL = 0b00000000; PORTL = 0b11111111; // 7:TRN_SW 6:EleDR_SW, 5:ESC, 4:MENU 3:Keyb_Left, 2:Keyb_Right, 1:Keyb_Up, 0:Keyb_Down
|
||||
|
||||
ADMUX=ADC_VREF_TYPE;
|
||||
ADCSRA=0x85; // ADC enabled, pre-scaler division=32 (no interrupt, no auto-triggering)
|
||||
ADCSRB=(1<<MUX5);
|
||||
adcInit();
|
||||
|
||||
/**** Set up timer/counter 0 ****/
|
||||
// TCNT0 10ms = 16MHz/1024/156(.25) periodic timer (100ms interval)
|
||||
|
||||
Reference in New Issue
Block a user