[X9D] EEPROM bug fixes

src/eeprom_avr.cpp

@@ -244,7 +244,9 @@ void EeFsFormat()
   eeFs.mySize   = sizeof(eeFs);
   eeFs.freeList = 0;
   eeFs.bs       = BS;
-  for (blkid_t i=FIRSTBLK; i<BLOCKS-1; i++) EeFsSetLink(i, i+1);
+  for (blkid_t i=FIRSTBLK; i<BLOCKS-1; i++) {
+    EeFsSetLink(i, i+1);
+  }
   EeFsSetLink(BLOCKS-1, 0);
   eeFs.freeList = FIRSTBLK;
   EeFsFlush();
@@ -944,10 +946,14 @@ void eeReadAll()
 
     EeFsFormat();
 
+    MESSAGE(STR_EEPROMWARN, "GENERAL WRITE", NULL, AU_EEPROM_FORMATTING);
+
     theFile.writeRlc(FILE_GENERAL, FILE_TYP_GENERAL, (uint8_t*)&g_eeGeneral, sizeof(EEGeneral), true);
 
     modelDefault(0);
 
+    MESSAGE(STR_EEPROMWARN, "MODEL 0 WRITE", NULL, AU_EEPROM_FORMATTING);
+
     theFile.writeRlc(FILE_MODEL(0), FILE_TYP_MODEL, (uint8_t*)&g_model, sizeof(g_model), true);
   }
   else {

src/open9x.cpp

@@ -2883,8 +2883,8 @@ void perMain()
   else if (TIME_TO_WRITE)
     eeCheck();
 #elif defined(CPUARM)
-  if (TIME_TO_WRITE)
-    eeCheck();
+  /*if (TIME_TO_WRITE)
+    eeCheck();*/
 #else
   if (!eeprom_buffer_size) {
     if (theFile.isWriting())
@@ -3366,7 +3366,7 @@ uint16_t stack_free()
 
 inline void open9xInit(OPEN9X_INIT_ARGS)
 {
-  eeReadAll();
+  // eeReadAll();
 
 #if defined(CPUARM)
   setVolume(g_eeGeneral.speakerVolume);

src/sky9x/board_sky9x.cpp

@@ -372,15 +372,10 @@ extern "C" void PIOC_IRQHandler()
   }
 }
 
-extern "C" void TC2_IRQHandler()
+void interrupt5ms()
 {
-  register uint32_t dummy;
   static uint32_t pre_scale ;             // Used to get 10 Hz counter
 
-  /* Clear status bit to acknowledge interrupt */
-  dummy = TC0->TC_CHANNEL[2].TC_SR;
-  (void) dummy ;          // Discard value - prevents compiler warning
-
   HAPTIC_HEARTBEAT();
   AUDIO_HEARTBEAT();
 
@@ -395,6 +390,17 @@ extern "C" void TC2_IRQHandler()
   }
 }
 
+extern "C" void TC2_IRQHandler()
+{
+  register uint32_t dummy;
+
+  /* Clear status bit to acknowledge interrupt */
+  dummy = TC0->TC_CHANNEL[2].TC_SR;
+  (void) dummy ;          // Discard value - prevents compiler warning
+
+  interrupt5ms();
+}
+
 // Settings for mode register ADC_MR
 // USEQ off - silicon problem, doesn't work
 // TRANSFER = 1

src/x9d/STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/CMSIS/Device/ST/STM32F2xx/Source/Templates/system_stm32f2xx.c

@@ -148,8 +148,9 @@
 
 
 /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */
-#define PLL_M      25
-#define PLL_N      240
+// Gives 60MHz
+#define PLL_M      12
+#define PLL_N      120
 
 /* SYSCLK = PLL_VCO / PLL_P */
 #define PLL_P      2
@@ -185,6 +186,10 @@
   * @{
   */
 
+extern uint32_t Master_frequency ;
+uint32_t Peri1_frequency ;
+uint32_t Peri2_frequency ;
+
 static void SetSysClock(void);
 #ifdef DATA_IN_ExtSRAM
   static void SystemInit_ExtMemCtl(void); 
@@ -400,6 +405,9 @@ static void SetSysClock(void)
          configuration. User can add here some code to deal with this error */
   }
 
+  Master_frequency = 60000000 ;
+  Peri1_frequency = 30000000 ;
+  Peri2_frequency = 15000000 ;
 }
 
 /**

src/x9d/board_x9d.cpp

@@ -38,8 +38,14 @@ uint8_t temperature = 0;          // Raw temp reading
 uint8_t maxTemperature = 0 ;       // Raw temp reading
 volatile uint32_t Tenms ; // TODO to remove everywhere / use a #define
 
+// TODO why not here the Peri1_frequency ... (to avoid modifications in system_stm32f2xx.c)
+uint32_t Master_frequency ;
+extern uint32_t Peri1_frequency ;
+extern uint32_t Peri2_frequency ;
+
 void keysInit();
 void pwrInit();
+void eepromInit(); // TODO check it's not in another include
 
 uint8_t getTemperature()
 {
@@ -63,11 +69,63 @@ void usbMassStorage()
 {
 }
 
+// Starts TIMER at 200Hz, 5mS period
+void init5msTimer()
+{
+  // Timer14
+  RCC->APB1ENR |= RCC_APB1ENR_TIM14EN ;           // Enable clock
+  TIM14->ARR = 4999 ;     // 5mS
+  TIM14->PSC = Peri1_frequency / 1000000 ;                // 1uS from 30MHz
+  TIM14->CCER = 0 ;
+  TIM14->CCMR1 = 0 ;
+  TIM14->EGR = 0 ;
+  TIM14->CR1 = 5 ;
+  TIM14->DIER |= 1 ;
+  NVIC_EnableIRQ(TIM8_TRG_COM_TIM14_IRQn) ;
+}
+
+void stop5msTimer( void )
+{
+  TIM14->CR1 = 0 ;        // stop timer
+  NVIC_DisableIRQ(TIM8_TRG_COM_TIM14_IRQn) ;
+  RCC->APB1ENR &= ~RCC_APB1ENR_TIM14EN ;          // Disable clock
+}
+
+// TODO use the same than board_sky9x.cpp
+void interrupt5ms()
+{
+  static uint32_t pre_scale ;       // Used to get 10 Hz counter
+
+  // HAPTIC_HEARTBEAT();
+  // AUDIO_HEARTBEAT();
+
+  if ( ++pre_scale >= 2 ) {
+    Tenms |= 1 ;                    // 10 mS has passed
+    /* if ( Buzzer_count ) {
+      if ( --Buzzer_count == 0 )
+        buzzer_off() ;
+    } */
+    pre_scale = 0 ;
+    per10ms();
+  }
+}
+
+extern "C" void TIM8_TRG_COM_TIM14_IRQHandler()
+{
+  TIM14->SR &= ~TIM_SR_UIF ;
+  interrupt5ms() ;
+}
+
 #if !defined(SIMU)
 void boardInit()
 {
   pwrInit();
   keysInit();
+  init5msTimer();
+
+  __enable_irq() ;
+
+  eepromInit();
 }
 #endif
 

src/x9d/hal.h

@@ -169,7 +169,7 @@
 // EEPROM and CAT5137
 #define I2C_Speed                       200000
 #define I2C_FLASH_PAGESIZE              64
-#define I2C_EEPROM_ADDRESS              0xA0
+#define I2C_EEPROM_ADDRESS              0xA2
 #define I2C_CAT5137_ADDRESS             0x5C //0101110
 
 // SD card----SPI2

src/x9d/i2c_ee.c

@@ -252,7 +252,19 @@ void I2C_EE_BufferWrite(uint8_t* pBuffer, uint16_t WriteAddr, uint16_t NumByteTo
     /* If NumByteToWrite < I2C_FLASH_PAGESIZE */
     if (NumOfPage == 0) {
       I2C_EE_PageWrite(pBuffer, WriteAddr, NumOfSingle);
+
+      lcd_clear();
+      lcd_putsAtt(100, 10, "WaitStdby", GREY1);
+      lcd_putsAtt(100, 20, "WaitStdby", GREY2);
+      lcd_putsAtt(100, 30, "WaitStdby", 0);
+      lcdRefresh();
+
       I2C_EE_WaitEepromStandbyState();
+
+      lcd_clear();
+      lcd_putsAtt(100, 10, "Fin WaitStdby", GREY2);
+      lcdRefresh();
+
     }
     /* If NumByteToWrite > I2C_FLASH_PAGESIZE */
     else {