piotr/edgetx-gx12
1
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases Wiki Activity

Makefile typos from #1644

Browse Source
This commit is contained in:
bsongis
2014-09-15 12:23:12 +02:00
parent 141e8322ec
commit c751e3e4cd
1 changed files with 14 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files
radio/src/Makefile
+14 -14
View File
@@ -69,7 +69,7 @@ FAI = NO
# the latests deliveries for Turnigy 9x transmitters (since 2 years now, 2014) do not stop sending if no pulses are generated.
# This fact totally breaks the nice throttle and switch warning concept, because even we prevent sending pulses the
# transmitter modul ignores this, and continous to send the last value or 0 at beginning. And 0 means in the middle of throttle -> 50%.
# transmitter module ignores this, and continues to send the last value or 0 at beginning. And 0 means in the middle of throttle -> 50%.
# To cope with this situation, we need a new concept how to handle throttle and switch warnings.
# if you have a 0 value (50% ) for throttle, while throttle warning is active, you should activate this switch
# Values = YES, NO
@@ -126,7 +126,7 @@ CORRECT_NEGATIVE_VALUES = YES
ARITHMETIC_OVERFLOW_CHECK = NO
# increases resolution for throttle statistics and throttle counting, in very rare cases.
# this will be only true if an output channel is used for throttle calculation, and this chanenel has changed limits, e.g. -90% to +80%
# this will be only true if an output channel is used for throttle calculation, and this channel has changed limits, e.g. -90% to +80%
# if you use standard limits for throttle or directly the throttle stick you do not need to bother about this option
# not valid for ARM based transmitters like Taranis, They do not have this rounding issue at all
# Values = YES, NO
@@ -161,7 +161,7 @@ FONT = STD
# Values = YES, NO
PPM_CENTER_ADJUSTABLE = NO
# PPM symetrical limits
# PPM symmetrical limits
# Values = YES, NO
PPM_LIMITS_SYMETRICAL = NO
@@ -247,7 +247,7 @@ EEPROM_PROGRESS_BAR = NO
# Activates the DEBUG Mode (all boards)
# On G9X V4 board, when VOICE=NO:
# PORTH:7 --> Transistion LOW to HIGH = start of setupPulses(). Transistion HIGH to LOW = end of setupPulses().
# PORTH:7 --> Transition LOW to HIGH = start of setupPulses(). Transition HIGH to LOW = end of setupPulses().
# PORTH:6 --> LOW->HIGH = start of mixer calcs. HIGH->LOW, end of mixer calcs.
# Values = YES, NO
DEBUG = NO
@@ -282,11 +282,11 @@ MENUS_LOCK = NO
# MASSSTORAGE: The TX will appear as a drive
USB = JOYSTICK
# Channel monitor display behaviour
# Channel monitor display behavior
# Values = NO, YES
# YES - hide the fact that channel is inverted in limits tab
# and show inverted channel value with oposite sign
# NO - normal behaviour, show real channel values
# and show inverted channel value with opposite sign
# NO - normal behavior, show real channel values
CHANNELS_MONITOR_INV_HIDE = NO
# Use newlib-nano
@@ -1349,7 +1349,7 @@ else
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O ihex opentx.elf opentx.hex
$(OBJCOPY) -O ihex opentx.elf opentx.hex
endif
%.bin: %.elf
@@ -1439,12 +1439,12 @@ AVRCOMMAND = $(AVRDUDE) $(AVRDEVICE)
WRITE_COMMAND = $(AVRCOMMAND) -U flash:w:opentx.hex:i
ifeq ($(RESTORE_EEPROM), YES)
BACKUP_EEPROM = YES
ifeq ($(DOUBLE_WRITE_OK), YES)
WRITE_COMMAND += -U eeprom:w:$(DATA_DIR)/eeprom-$(DATE).hex:i
else
SECOND_WRITE_COMMAND = -U eeprom:w:$(DATA_DIR)/eeprom-$(DATE).hex:i
endif
BACKUP_EEPROM = YES
ifeq ($(DOUBLE_WRITE_OK), YES)
WRITE_COMMAND += -U eeprom:w:$(DATA_DIR)/eeprom-$(DATE).hex:i
else
SECOND_WRITE_COMMAND = -U eeprom:w:$(DATA_DIR)/eeprom-$(DATE).hex:i
endif
endif
ifeq ($(BACKUP_FLASH), YES)