[X9D] Soft switch not working. I remove the code for the moment.

src/x9d/hal.h

@@ -168,7 +168,7 @@
 
 // EEPROM and CAT5137
 #define I2C_Speed                       200000
-#define I2C_FLASH_PAGESIZE              (64)
+#define I2C_FLASH_PAGESIZE              64
 #define I2C_EEPROM_ADDRESS              0xA0
 #define I2C_CAT5137_ADDRESS             0x5C //0101110
 

src/x9d/pwr_driver.cpp

@@ -41,9 +41,12 @@ void soft_power_off()
 
 uint32_t check_soft_power()
 {
-  if (GPIO_ReadInputDataBit(GPIOPWR,PIN_PWR_STATUS) == Bit_RESET)
+#if 0
+  // TODO doesn't work :(
+  if (GPIO_ReadInputDataBit(GPIOPWR, PIN_PWR_STATUS) == Bit_RESET)
     return e_power_off;
   else
+#endif
     return e_power_on;
 }
 

src/x9d/stm32_flash.ld

@@ -3,8 +3,8 @@
 **
 **  File        : stm32_flash.ld
 **
-**  Abstract    : Linker script for STM32F207IG Device with
-**                1MByte FLASH, 128KByte SRAM
+**  Abstract    : Linker script for STM32F205 Device with
+**                0.5MByte FLASH, 128KByte SRAM
 **
 **                Set heap size, stack size and stack location according
 **                to application requirements.
@@ -42,7 +42,7 @@ _Min_Stack_Size = 0x200; /* required amount of stack */
 /* Specify the memory areas */
 MEMORY
 {
-  FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 1024K
+  FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 512K
   RAM (xrw)       : ORIGIN = 0x20000000, LENGTH = 128K
   MEMORY_B1 (rx)  : ORIGIN = 0x60000000, LENGTH = 0K
 }
@@ -51,17 +51,12 @@ MEMORY
 SECTIONS
 {
   /* The startup code goes first into FLASH */
-  .isr_vector :
-  {
-    . = ALIGN(4);
-    KEEP(*(.isr_vector)) /* Startup code */
-    . = ALIGN(4);
-  } >FLASH
 
   /* The program code and other data goes into FLASH */
   .text :
   {
     . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
     *(.text)           /* .text sections (code) */
     *(.text*)          /* .text* sections (code) */
     *(.rodata)         /* .rodata sections (constants, strings, etc.) */