* initial version of clickable checklist
* do not display checkboxes for empty lines if checklist is shorter than screen size
* remove checklist exit after completing it
cannot exit menu from menuTextView as level above there is while loop that cannot be stopped from thic place in code
* menu entry to enable and disable interactive checklist
* only when complete interactive checklist is closed
* config updated & not display checkboxes when entered from "View Notes"
* add setup entry for colorlcd
* do not make interactive checkist when loaded from menu
* fix datastruct size after merge
* Companion support for interactive checklist
* mark checklist lines as non-checkable with '=' for B&W radios
* Process only items visible on screen
This is also crucial when it comes to analyse non-checkable items on a checklist, as in this way there is no need to load non-visible items from SD-card
* WIP fix merge problems
* update yaml datastructs
* restore most functionalities for interactive check lists on color LCD radios
currently no automatic line wrapping and you can always exit the checklist, even when it is not fully done
* finalise interactive checklists for color LCD
* fix: rebase/merge issues
* fix: model setup checklist section
* fix: fix 212 model setup
* Re-work of the some of the color lcd checklist code (#3787)
* Move checklist logic to sub-class.
Show model name instead of file name in title, show 'Preflight checks' in title2 for checklist.
Handle long line wrapping of text.
Don't indent lines without checkbox.
Add 'RTN' button when done.
* Code cleanup.
* Simplify code by storing a list of checkboxes instead of scanning LVGL object hierarchy.
* Indent checkboxes to make touch activation easier.
Keep 'RTN' button visible so last checkbox is further from bottom of screen (for touch activation).
'RTN' button is disabled until checklist complete.
* Add checkbox class constructor for preflight checks.
* Fix checkbox size.
---------
Co-authored-by: Piotr Rzeszut <piotrrze@gmail.com>
Co-authored-by: 3djc <lesitewebdejc@hotmail.com>
Co-authored-by: philmoz <philmoz@users.noreply.github.com>
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
* disable timers with mode OFF
* fix isModeOff to reference mode not switch
* update model edit source lists when timer mode changed
* add timer mode test to reset function
* add timer mode test for Set and Reset functions
* change yaml special source TIMERx to Tmrx
(to allow aligning with firmware compile option)
* feat(cpn): External module form factor set in Radio Profile to allow aligning with firmware compile option
* Note tweak
* - Concentrated Multi protocol definitions into a consistent single source. Actually two .h files, one for the protocol list and names, the other for subtypes and capababilites, see comments in .h files as to why
- updated available protocols reflecting 1.3.3.20 (15+ protocols)
- fixed Companion always showing f/s and channel map options in model setup disregarding the protocol capability
* Following @pfeerick's review: changed heaeders and typos
fixed Ubuntu runtime error on assert
fixed change of Multi protocol not triggering writing yaml file
* corrected copy/paste error
* fixed FrSky index juggling
* Updated Multiprotocol database to current MPM project status (ref. MPM Multiprotos.ino)
- changed protocol name FX816 to FX
- added Flysky AFHDS2A options PPM and PPWM SBUS 16ch subtypes "PWM,SB16" and "PPM,SB16
- added V761 option to select TOPRC
- added FX options "816" and "620"
- added FRSKYR9 option "-- 8ch"
* MPM protocol scan excludes some protocols which are not meant to be selected. For Companion and Simualtor (and for radios if there is no MPM connected) this was handled in different places with outdated information. Harmonized and centralized the handling of non-selectabale protocols into the single source for all companion, Simulator and all gui types.
* More cleanup:
- changed some MPM protocol names to the ones the MPM delivers with MPM protocol scan to harmonize names between CPN/Simulator/radio
- added XN2927DUMP and MOULDKG to the list of excluded MPM protocols just like the MPM does with MPM protocol scan
- added new option value limits and moved definitions to single source
- adapted CPN and radio to use common definitions of option values for all GUI types
- moved distributed MPM (as far as possible) to one coherent place under a single #if defined (MULTIMODULE)
- fixed option value not reset at change of protocol
- some editorial stuff
Note: There is still some work to be done on CPN GUI option values. DSM2 servo rates are hard coded, BAYANG telemetry options are only shown by index and not by text as in radio code, AFHDS2A servo update rate is shown as index too which is to no use for users.
I'll try to fix all this in the next session, but request to get rid of BAYANG telemetry options translations. It is much easier to define a common string list by using untranslated.h
* rebase due to fr.h
* resolve merge conflict with main fr.h
* more cleanup:
- deleted multiple definition of MM_RF_CUSTOM_SELECTED in favor of single source define
- bw radios: change to only allow defined protocols rather than a fixed 127 protocols
* Changes:
- magic sentinel number 0xfe as define
- add 10 NN protocol entries for future use of new MPM protocols not yet defined in ETX (still recommend timely ETX maintenance update if MPM releases new firmware)
* Changes by @elecpower:
- align field labels to radio
- change servo update frequency from combo box to spin box with edit only via up/down arrows to stop invalid values being entered via keyboard. Remove frequency list used to populate combo box as only used by Companion.
- add validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.
* Changes:
- radio: added validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.
* CPN: use sentinel define
* cpn: Sort multi protocols list (courtesy @elecpower)
* fixes#3480
changes:
- moved FrSky subtype defines to MultiProtoDefs.h
- updated bind_button_driver.cpp
* missed replacing one instance of setMultiProtocol()
* changes:
- editorial change
- added multi option to OMP protocol (ref #2713)
* rather go for STR_MULTI_RFTUNE because MPM manual talks about RF tune
* made XN297_DUMP selectable (available with MPM debug fw only)
* corrected merge mistakes
* introducing external MLink module telemetry as module PPM subtype
* implemented fix for sensor discovery display not showing all detected sensors (is in separate PR too)
implemented PPM subtypes in Companion
* add PPM subtype to model printer
finalize subtypes for PPM in Companion
* added logic to try to use HW UART with inverters turned off first (e.g. NV14), then, if not successfull use soft serial inverted (== uninverted data due to HW inverters on PCB)
changed start bit detection IRQ priority from 5 to the previous 0 (also in separate PR)
* extended telemetry timeout to 2s due to slow Mlink RSSI update rate
* changed the "NOTLM" sub-type texts to:
- "No Telem" for 128x64 (this is the max numbers of characters it can take)
- "No Telemetry" everything else including Companion
* Companion:
- lower case 1st charachter on PpmSubTypeStrings to ppmSubTypeStrings
- added telemetry hooks for ppmSubTypeStrings stringx
* simplified serial port initialization for MLink telemetry
* editorial change: corrected obsolete comment
* feat: Remove TR# mixsrc when trainer disabled
When trainer mode is not enabled, there is no point
showing the TR# mixer sources. Once you enable a
trainer option, they will become visible again.
* fix: Add missing "Input" check for B&W radios
* fix(cpn): Trainer mode default is off
* chore(cpn): If trainer mode off, hide TR/PPM srcs
* (cpn) Refresh all source lists on change of trainer mode
Co-authored-by: elecpower <neilh713@tpg.com.au>
* timer direction: ellapsed or left
* Add AUDIO announcement support
* Storage for showElapsed
* Translations
* Fix storage
* BW implementation
* Different BW implementation
* Companion support
* Color LCD implementation and rebase to lvgl
* Fix problems found by raphaelcoeffic
* chore: Regenerate the YAML files properly
* fix: Remove unused `TR_SHOW` remnant
* chore: Formatting and cleanup
* fix: Timer dir choice was shown in wrong place
Wrong newline used in ce23b50
* Fix cpn ui triggers, remove unnecessary code and some formatting
* fix(colorlcd): Hide timer dir opt if zero value
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
- fix Companion yaml model read and write
- B&W radios treat bit values the same as color to avoid unnecessary complication for Companion and radio conversions
- B&W radios default is therefore off for all pots and sliders
- B&W radios fix runtime warnings check
- all radios fix to save last pot or slider position when checked and mode AUTO on change of model or power off
- all radios do not display Pots Warning in model setup if no pots or sliders supported
* replace magic number for throttle idle with correct define
* settings for custom throttle warning position
* settings fixed not to break byte-aligment of bit-fields
* evaluate custom throttle warning position
* add requested throttle value to warning text
* comment about field alignment in ModelData struct
* Menu for editing custom throttle warning for 128x64 radios
Tested on RM TX12
* Improoved menu display
* move displayed strings to translation
* translation template added for each language
* support for 212x64 B&W radios
* menu for colorlcd
not tested
* corrected translation entry for TW
* corrected handling of padding bits in ModelData structure
* Companion support for custom throttle warning position
* Rebase catchup
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* ADC Filter - On/off state configurable at the model level
* Updated YAML configuration to match change from ADC Filter feature commit
* Companion changes to support ADC jitter filter to be a model configuration item.
* Renamed jitterFilter field to noJitterFilter.
This better describes the semantic, which is inverted.
* Updated after review
* Re-run generate-yaml
* Changed ADC Jitter filter control on Model to be tri state.
Off, On or use the radio setting
* Adde NOBACKUP() to the added field
* Re-generate yaml_datastructs
* Making the default state to use radio setting/Global value
* Updated after review:
Changing to more consistent naming across firmware and companion.
* Reverted files that was accidently added to the commit.
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* fix: tpro function switch toggle mode
* feat: Function switches now have alway on option
* Companion support for function switch always on
* Fix nasty eeprom error
* Update fs startup item model
* Fix Tpro SWITCH_EXISTS
Co-authored-by: 3djc <lesitewebdejc@hotmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
* Add ability to undo hardware internal module change
* Add internal module protocol check on model edit
* Event driven check and update of all models
* Fix model edit dialog searches
* Add OFF to list of internal modules
* Fix internal module protocol list issue #1382
* Introduce yaml in Companion
* EdgeTX Companion
Replace some OpenTX refs
Data conversion to v220
Update Timers ui to cater for mode field split
* Fix some simulators crashing when started from Companion
* Disable firmware and app update checking and downloads from companion
* Some more rebranding
* Disable manual download actions and another rebrand
* Fix cmake warning
* Fix mode ON conversion gtests and enable switch in model edit
* Stop update message when updates turned off
* OpenTX #8580 Fixes missing negative sign for telemetry sources
* OpenTX #8604 fix curves tooltip colors
* OpenTX #8616 Fix release notes url references
* OpenTX #8548 Align file sync folder references
* OpenTX #8548 Link field once
* OpenTX #8550 Confirmation prompt before write models and settings to radio
* OpenTX #8550 Translate strings
* Title and splash images
* Change DEB package maintainer
* Start NV14
* NV14 continued
* NV14 sim
* Timer countdownStart data conversion and ui fixes
* Fix screen width
* Merge OpenTX PR 8675
* NV14 sim add computer keys and mouse to activate some functions
* Only allow supported protocols for each module on conversion
* Clear mismatched modules on conversion
* Replace colorlcd theme and layout blobs with detailed data structs in companion
* NV14 has 2 topbar zones
* Fix layout init
* Fix layout init again
* Reset to eepromimportexport.h to main branch
* Import/export does not like enum fields
* Model edit add custom screens tab for color and bw telemetry
* Free memory
