Some DSM2 modules take longer than others to power up. Thus, sending a
single BIND packet is not sufficient in some cases. I have implemented
here an approimately 4 second period (after power-up) during which
time the trainer swtich can activate BIND mode.
This is in fact not strictly needed, since the DSM module will by
itself reject bind packets after a short time. (I have confirmed this
again with my DSM2 module today.) However, we like to be sure, so the
limited time window for BIND activation remains.
The word "BIND" also now appears as confirmation in upper-right of
the main view, whenever bind packets are being sent to the DSM module.
(I did not consider it important to add this "BIND" word to the
language files. Please feel free to do so though, if warranted.)
Gruvin.
RSSI Tx and Rx before A1 and A2
Rotary Encoder on ersky9x board
A Mix may be defined in many Phases (idea from Romolo, thanks!)
Differential is now a Curve (private Curve of a Mix)
Issue 56 fixed (native stick as Mix input)
EEPROM saving (LimitData structure)
Issue 79 fixed (Audio Queue)
Trims now working in ersky9x simu
Issue 63 fixed (InstantTrim, Trims2Ofs to double check before release)
Issue 68 fixed (better names for vario sources)
[gruvin] 2 digits for voltage calibration
The choice for Trim in mixers will be: OFF / ON / Rud / Ele / Thr / Ail
EEPROM formatted on ARM when invalid EEPROM
No EEPROM format when ARM board USB powered
Scrollbar on the Outputs Main Screen
4 screens for Outputs Main Screen on ARM board
Virtual Switches Main Screen redesigned
Saves 200bytes flash on stock board!
SD card archive function continued (doesn't delete the model until function finished)
Alternate view for outputs in Main Views (Bars and Numbers)
GPS speed was badly displayed (ap instead of bp)
Revert the last Haptic changes (was unfinished, no more spare time during the week-end, sorry!)
Revert my last modification on main views (offset not displayed in Bar Graphs, I was wrong)
PPM Center now configurable for each servo
No mean on the Batt voltage when in the calibration menu to have a faster response when calibrating
SD card Backup / Restore Models feature started
Some french translations fixed
Condensed display of Mixers lines in MIXER menu (by Max)
MOD_EXTRA_ROTARY_ENCODERS added (by Max): on v4.1 it adds the support of an extension board for 3 more rotary encoders
TH% not inverted when throttle stick inverted
Rotary Encoders as Mixer Sources on v4 board
Pulses on ersky9x board port
Telemetry on ersky9x board port
InstantTrim should work also in Telemetry View
Trims2Offsets function ok with Flight Phases
New Makefile option EEPROM_PROGRESS_BAR
Many flash savings ...
bsongis