Bertrand Songis
4be6cfccab
[Taranis] Crossfire "Flight mode" telemetry sensor now OK
2016-06-06 21:59:49 +02:00
Bertrand Songis
5767be27b6
[Crossfire] New frame ATTITUDE added
2016-06-04 12:36:37 +02:00
Bertrand Songis
52e59fc85b
SWR now only available in debug screens (not a telemetry sensor)
2016-05-31 20:23:09 +02:00
Bertrand Songis
7908eaa406
[All] Code refactoring
...
- keys beep and haptic refactoring (not anymore audio events)
- trims move/mid/min/max refactoring (trim end splitted to trim min / trim max)
- S6R new alarms
- S6R servos/rx status displayed as a text (not an integer which has no sense)
- Timer countdown configuration
- The splash was not displayed (but the timeout was there) after the first calibration
2016-05-13 14:41:48 +02:00
Damjan Adamic
8cd677d697
Projectkk2glider/issue 3463 negative filtered sensor values ( #3469 ) (ported from master)
...
* Fixes #3463 : negative sensor values were invalid if filter was active for the sensor
* Re #3463 : enable simultaneous use of `offset` and `filter` (was: when `offset` was enabled, the `filter` was always inactive even if enabled)
2016-05-06 22:37:05 +02:00
Bertrand Songis
cd9c17e1f4
Cosmetics
2016-05-06 10:21:32 +02:00
Bertrand Songis
d8736bfe94
[FrSky] Support of old FAS prototypes (different resistors)
2016-04-30 19:33:00 +02:00
Bertrand Songis
bd87028fd5
FrSky S.PORT upstream ( #3426 )
...
FrSky S.PORT upstream
2016-04-29 18:44:25 +02:00
Bertrand Songis
56f59196ea
[9XR-PRO] Compilation fixes and cosmetics
2016-04-28 20:36:42 +02:00
Bertrand Songis
e04dfb7b7e
[Crossfire] There was a NO DATA remaining in the telemetry screens
2016-04-26 23:53:30 +02:00
Bertrand Songis
26e156f9ad
[Crossfire] Telemetry new fields (GPS / Battery)
...
I did a refactoring for the latitude and longitude decoding which should be tested carefully for FrSky S.PORT and D telemetry
There was a double conversion in S.PORT protocol, there are less maths now, and perhaps precision will be better
2016-04-26 19:36:48 +02:00
Bertrand Songis
a0b4053e82
[Crossfire] Now the pulses frame is encoded the same way than other Crossfire frames
2016-04-02 21:05:22 +02:00
Andre Bernet
75977b6b6d
[Horus] Enable SWR warning
2016-04-01 11:48:53 +04:00
Bertrand Songis
f2fb6b20de
Crossfire CRC added
2016-03-28 20:31:42 +02:00
Bertrand Songis
a3c175f537
Crossfire telemetry protocol start
2016-03-28 19:07:28 +02:00
Bertrand Songis
746dc450fa
Telemetry files split
2016-03-28 11:24:55 +02:00
Bertrand Songis
5cb6884ab3
[Horus / Taranis] S.PORT telemetry now uses the DMA. I think the buffer could be reduced, 512bytes seems really big
2016-03-18 21:49:06 +01:00
Bertrand Songis
0341b9ffce
[SPORT] Alarm added when a servo is in overload or a sensor is disconnected
2016-03-10 20:22:26 +01:00
Bertrand Songis
863272bc52
MSVC errors
2016-03-05 08:59:28 +01:00
Bertrand Songis
a7d0816ac7
Merge pull request #3326 from opentx/bsongis/passthrough_sport_to_lua
...
Bsongis/passthrough sport to lua
2016-03-05 00:27:13 +01:00
Bertrand Songis
55f71f053b
myeeprom.h splitted into dataconstants.h and datastructs.h
2016-03-04 23:54:35 +01:00
Bertrand Songis
56fb01a958
Lua telemetryPush function now added
2016-02-28 21:21:48 +01:00
Bertrand Songis
75e1bead3f
S.PORT to Lua telemetry passthrough
...
The Fifo is created with ```telemetryRegister``` and elements (ID + Value) are taken from the Fifo with ```telemetryPop```
Not tested at all. Just for review / discussion
2016-02-28 11:56:54 +01:00
Bertrand Songis
dcf7cd2c65
[RedundancyBus] Fields renamed (not PowerBox anymore)
2016-02-21 10:00:01 +01:00
Bertrand Songis
1c38ccaa12
New menu to configure the user custom screens
2016-01-31 11:35:25 +01:00
Bertrand Songis
c36acc5372
SPORT_FILE_LOG renamed to LOG_TELEMETRY. And logs are now stored in telemetry.log
2016-01-30 12:58:00 +01:00
Bertrand Songis
a42b63ff34
[Horus] Missing telemetry code
2016-01-22 22:14:51 +01:00
Bertrand Songis
97d59cfa56
Copyright script applied to all sources in the radio directory
2015-12-23 19:57:13 +01:00
Bertrand Songis
0f1ccc993e
Include guard script applied to all headers in the radio directory
2015-12-23 19:47:10 +01:00
Bertrand Songis
88841f63ca
Switch to CMake
2015-12-21 23:43:18 +01:00
Bertrand Songis
c819814d94
Merge pull request #3165 from opentx/projectkk2glider/crossfire_port_to_next
...
Projectkk2glider/crossfire port to next
2015-12-20 23:44:10 +01:00
Bertrand Songis and Damjan Adamic
05c29d320c
[Powerbox] 0xOB20 field added. Radio translations
2015-12-20 17:21:34 +01:00
Bertrand Songis and Damjan Adamic
7789fd0b38
[Powerbox sensor] First tests done. It remains the 0x0B20 to add
2015-12-20 17:21:27 +01:00
Bertrand Songis and Damjan Adamic
b00ef6a9b3
[S.PORT] Powerbox fields added
2015-12-20 17:21:16 +01:00
Damjan Adamic
91e80d446a
#2894 - Crossfire (inverted serial) sent on S.PORT pin in the module bay (ported from master f7044a20ec)
...
16 channels sent every 2.5ms now @ 200KBauds with CRC
2015-12-20 17:10:32 +01:00
mikeller
90a62b00f0
Fixed compile error when building simulator.
2015-12-15 19:39:01 +13:00
Michael Keller
d165a22a54
Fixup from merge.
2015-12-15 12:06:16 +13:00
Michael Keller
1f59f04070
Merge branch 'mikeller/invert_serial_rx_next' of https://github.com/mikeller/opentx into mikeller/invert_serial_rx_next
2015-12-15 12:04:03 +13:00
mikeller
01fa6471c7
Graft of serial port inversion option onto 'next'.
2015-12-15 12:03:21 +13:00
mikeller
551ef10d6f
Graft of serial port inversion option onto 'next'.
2015-12-15 02:08:16 +13:00
Damjan Adamic
aa2ca4f729
Fixes #3043 : unit for Air speed sensor set to knots
2015-12-13 20:39:28 +01:00
Damjan Adamic
51b8f9b054
Re #2469 : part1: Menu system renaming of variables and refactoring (ported #3087 from master commits 3186a5d99..94d8b8b0e8d)
2015-11-26 18:29:20 +01:00
Bertrand Songis
791b1173e3
Another couple of functions renamed
...
And nothing else this time!
2015-11-25 21:24:20 +01:00
Bertrand Songis
de733579d5
Merge remote-tracking branch 'origin/next' into Horus
...
# Conflicts:
# companion/src/CMakeLists.txt
# companion/src/firmwares/opentx/opentxinterface.cpp
# companion/src/firmwares/opentx/simulator/CMakeLists.txt
# companion/src/firmwares/opentx/stamp-opentx.h.in
# radio/src/Makefile
# radio/src/cli.cpp
# radio/src/gui/Taranis/helpers.cpp
# radio/src/gui/Taranis/lcd.cpp
# radio/src/gui/Taranis/menu_model_setup.cpp
# radio/src/gui/Taranis/view_main.cpp
# radio/src/lua_api.cpp
# radio/src/main_avr.cpp
# radio/src/myeeprom.h
# radio/src/opentx.cpp
# radio/src/pulses/pxx_arm.cpp
# radio/src/storage/eeprom_conversions.cpp
# radio/src/targets/Horus/adc_driver.cpp
# radio/src/targets/Horus/board_horus.cpp
# radio/src/targets/Horus/board_horus.h
# radio/src/targets/Horus/diskio.cpp
# radio/src/targets/Horus/hal.h
# radio/src/targets/Horus/haptic_driver.cpp
# radio/src/targets/Horus/i2c_driver.cpp
# radio/src/targets/Horus/keys_driver.cpp
# radio/src/targets/Horus/lcd_driver.cpp
# radio/src/targets/Horus/led_driver.cpp
# radio/src/targets/Horus/pulses_driver.cpp
# radio/src/targets/Horus/pwr_driver.c
# radio/src/targets/Horus/sdio_sd.c
# radio/src/targets/Horus/sdio_sd.h
# radio/src/targets/Horus/serial2_driver.cpp
# radio/src/targets/Horus/telemetry_driver.cpp
# radio/src/targets/Horus/usb_conf.h
# radio/src/targets/Horus/usbd_desc.c
# radio/src/targets/Horus/usbd_storage_msd.cpp
2015-11-15 23:08:34 +01:00
Damjan Adamic
454a664d01
Re #3059 : table lookup used for unit conversion, saved some 50 bytes of FLASH
2015-11-12 14:53:00 +01:00
Damjan Adamic
58edcc3af8
Fixes #3059 : added unit conversions from km/h
2015-11-12 13:55:24 +01:00
Damjan Adamic
f854442c79
Fixes #3047 :
...
* negative altitude on top bar was displayed wrong (same bug affected vertical speed)
* add ability to select an altitude sensor with ft unit for top bar
* display actual sensor unit for top bar altitude
2015-11-10 18:01:42 +01:00
Bertrand Songis
ab0272c16c
[Horus] Refactoring continued
2015-10-24 11:27:34 +02:00
Bertrand Songis
c8f77fceec
[Horus] SD Storage started. UI continued.
...
+ Some boyscout work on LCD functions
2015-10-22 07:10:19 +02:00
Damjan Adamic
082ba0893d
Out of bounds protection for telemetryItems[] array access and some code refactoring for telemetry value precision
2015-10-18 12:06:25 +02:00
Bertrand Songis