* Support new r9m firmwares
* More future proof, thx Kilrah
* (significant) typo
* Companion part
* Make support a compilation option
* Fix compilation for normal users
* Warning popup for usability tests
* Better implementation
* All sizes
* Cosmetics
* Flex is EU+/AU+ only
* [Companion] Handle "flexr9m" option in module settings UI (to match radio UI, including warning msg); Move some "toString" functions out of ModelPrinter into ModuleData/Multiprotocols; "Future-proof" available R9M power options based on "stdr9m" fw option; Fix missing "Hitec" MM protocol name; Fix printing of R9M-EU power level in ModelPrinter.
* Cosmetics
* Rename R9M flex option
* Move failsafe further back to prevent nav oddity
* Implement model note view without menu handler. Use it before pulse starts
* Also at model change. Handle wd reset and start pulses after mixer
* Fix Horus compile
* Fix Horus crash
* Fix coding style issue
* add receiver number check for Horus
* find the first free model ID on LONG ENTER
* use the next free model ID for new models
* improve free model ID support for std LCD as well
* fixed “duplicate model”
* fixed ModelsList::isModelIdUnique()
* added setCustomFailsafe()
* failsafe setup: set all custom channels with ENTER long press
implements #5820
* added “outputs -> failsafe” menu item on horus
* change “Trims >> Subtrims” to “Trims => Subtrims”
* use translated string for “Outputs => Failsafe”
* fixed entered TR_TRIMS2OFFSETS and TR_OUTPUTS2FAILSAFE
When using ZCHARs in Horus texts, there are some artefacts when highlighted.
* added “outputs -> failsafe” menu item on taranis 212x64 LCD
* added “outputs -> failsafe” menu item on taranis 128x64 LCD
* fixed indentation
* Save 128 byte by moving variable to stack
* Make usb mass storage buffer smaller on F2 processors and put into reuseablebuffer
- Lower USB mass storage buffer to 512 bytes per default on F2
targets, makes usb speed slightly slower ~600 kB/s instead ~700 KB/s
in my tests, saving 3584 bytes
- Save another ~300 bytes by putting that buffer into reusableBuffer
* Don't put id into reusuableBuffer
All uses of id can be on the stack as well. Makes no difference for ram usage but makes it safer to reuse reusableBuffer
* Only link cdc serial when needed
We always linked usb cdc even in non debug builds. CDC uses about ~600 byte of RAM for its buffers and structures.
* [firmware][ARM] Adjust some value limits for mix sources and update editing UI for LSs, CFs, & telem. bars:
* Increase timer limits to +/-8:59:59 when used with LSs, CFs, & bars;
* Increase Lua script output limits to +/-30K;
* Trim limits based on extended limit model setting;
* Limit TX voltage to 25.5;
* Limit TX time comparison value to 29:59m;
* Use proper GVar limits (user-configured), display precision, & unit in LSs & telem. bars;
* Display timer values properly with hours (instead of mmm:ss).
* [firmware] getTimerString() would fail with times >= 100min if hours weren't shown.
* Fix builds w/out GVars.
* Switch backlight on when displaying a warning.
This is especially visible on the power off RSSI warning. This will also show the other warnings at start with backlight, even when blocklight is set to always off. But my X9D+ will switch its backlight on after boot once even with backlight on, so backlight=off is not so off as it seems.
* Rework power rssi code a bit
- Cleanup shutdown_confirm code
- allow x9d+ to be compiled as power button too to be able to test these things on the x9d+
- Fix shutoff after 10s in warning dialog on x9d
- Make warning dialog always turn on backlight
* Revert CMakeLists.txt