* Refresh UI module settings when AHFDS3 config is updated.
* Fix scroll order for module options when 'FlySky' module type selected.
Fix simulator crash issues related to FlySky module.
* Fixed UI refresh problems in UI widget ordering fix.
* Refresh config when receiver is connected.
* Disable change of bind time options when receiver is connected.
* Rename methods to better distinguish between buffer fill or actual send.
* Clean and tidy up AFHDS3 state flow.
* Implemented settings sync upon setting changes.
* Added RF power settings for IRM301/FRM303.
* Added RF power sensors for FRM303.
* Fixed config not saved and only FRM303 supports RF power settings.
* Fixed RF power command error.
* Fixed a crash for IRM301.
* Always check if port exists and return nullptr for driver.
* fix: Make Companion preserve settings *as is*
---------
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Fix the bug that some sensor values are displayed incorrectly
* Fix typos
* Fixed some units problem.
* Unit of SNR should be db and not dbm.
* Fixed Alt scaling in NV14.
* Fixed the temperature and voltage error of the FRM303 module.
* Fixed temperature data error.
---------
Co-authored-by: Richard Li <richard.li@ces.hk>
* Fix scroll order for module options when 'FlySky' module type selected.
Fix simulator crash issues related to FlySky module.
* Fix more simulator crashes
* Fix configurable external module port
* Added FRM303 support for TX16S via AUX1 mod, i.e. direct connect AUX1 TX/RX to PPM/Heartbeat pins.
---------
Co-authored-by: raphaelcoeffic <raphael.coeffic@frafos.com>
* Fix the BUG of V0 receiver setting IBUS SBUS; add the setting item of INRM301.
* Fix check failure; remove some unused characters.
* Fix typos and rename variables as well as fix compilation errors.
* add language
* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* Enable RX DMA on external module USART
* feat(ACCESS): configure AUX serial port as "External module" (#2562)
This allows configuring the external access mod on runtime rather than by compilation option.
* fix: fetch external module driver
* Get config after switching model ID
* Remember set model ID and change it on the fly
* Add AFHDS3 options
* Fix compiler warning
* Fix box sizing
* Apply model config before editing options
