2. basic scroll support
3. Basic layer support (still pretty broken), multiple screen support
4. Preliminary impelemntation of TextEdit using lvgl.
5. Preliminary implementation of StaticText using lvgl.
6. Preliminary implementation of TextButton using lvgl.
- fix Companion yaml model read and write
- B&W radios treat bit values the same as color to avoid unnecessary complication for Companion and radio conversions
- B&W radios default is therefore off for all pots and sliders
- B&W radios fix runtime warnings check
- all radios fix to save last pot or slider position when checked and mode AUTO on change of model or power off
- all radios do not display Pots Warning in model setup if no pots or sliders supported
* Do not list OFF on VCP menu if internal RF module is set to CRSF to allow pass-through flashing.
Set USB-VCP automatically to CLI when CRSF mode is selected for internal module and it was previously OFF. Activate CLI when iCRSF is selected.
* Companion part
Co-authored-by: elecpower <neilh713@tpg.com.au>
* Update model_setup.cpp
Adds R9M Flex (ACCST, non ACCESS) Power option GUI menu item, which is currently missing.
* Update model_setup.cpp
* R9M Flex power option menu for colorlcd
Adds power selection menu for R9M Flex (ACCST, pre 2019) on colorlcd radios. Tested working on a tx16s.
https://github.com/EdgeTX/edgetx/issues/1187
* Just test for FCC variants
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* fix: Prevent potential wordsplitting of variables
* chore: Remove need for separate cpn 32bit script
* Build script tag/branch/PR auto-detection
* Teach companion about VERSION_TAG
* Update some constant names
* Only one companion build script
* Actually use `VERSION_SUFFIX` in about screen 🤦
* Add space
* Remove line that was only for testing 32bit build
* Remove hyphen between win and bits
* Show codename in Settings -> Version
* cpn: Only show codename on tagged versions
* Update about screen also
* Double quotes around codename on colorlcd
* Update copyright year
* About screen should use VERSION_TAG when set
Adds USART6/AUX2 support also to Jumper T16 & T18. TX and RX lines are accessible via internal FrSky Bluetooth module pads on the mainboard. The USART6/AUX2 serial port functionality is usable more generic on these radios as well and not limited to Bluetooth only.
E.g. radio GPS is supported after this change (as are further serial port modes).
Only if firmware is explicitly built with -DBLUETOOTH=YES, USART6 will be dedicated to Bluetooth (as is the case also e.g. with TX16S).
* fix: Only define SUFFIX if PR or BRANCH build
Also, only define `VERSION_TAG` if VERSION_TAG exists.
* fix: Omit GIT SHA for colorlcd also if a tagged build
* Add PR number to version string
* Testing another way
* Decide according to GitHub ref type how to parse and where to output.
Prioritize EDGETX_VERSION_TAG, if set, else resort to EDGETX_VERSION_SUFFIX, if set.
Adjust also firmware_version and boot_version strings and adjist bootloader title.
* Consider also B/W.
* B&W: omit GIT SHA if tagged, otherwise own line
Omit GIT SHA from version string if a tagged version.
Otherwise, show on own line since is too long for 128x64 B&W displays.
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
CMake: Use ExternalProject_Add() to split by toolchain
Splits targets between native and cross-compiled targets, provides a cleaner solution to problems raised by compiling for example on Apple silicon, and better managing dependencies by allowing for object libraries in a cleaner way.
Imported from open-flysky/Flysky-OpenTX-Test-Branch
* companion: Don't nuke `stickDeadZone` setting
* Implement data storage properly
* Add missing check for NV14 storage struct sizes
* Formatting
* Use one less byte in the packed data struct
Thanks @raphaelcoeffic :)
* Move setting of stickDeadZone default
* Use a Choice combo rather than NumberEdit
* Good riddance magic number
* Also set default stick zone if setting is missing
* Teach tests about `STICK_DEAD_ZONE`
* Tweak choice width
* Cpn NV14 add stick dead zone to hardware and section labels
* Cpn NV14 align default pot names to radio
Co-authored-by: elecpower <neilh713@tpg.com.au>
* Allow trainer modes OFF and Master-Multi for all radios
* Change Trainer mode Off to the standard OFF
* fix: German for Trainer OFF, Master and Slave
