Commit Graph
180 Commits
Author SHA1 Message Date
3djcandMalte Langermann 784bfa7b7a Fix function switch yaml parser 2023-06-25 14:32:39 +02:00
Raphael CoefficandMalte Langermann 2b100e0eb5 refact: ADC, switches and keys
Add "hardware_defs" target to dump hardware defines from hal.h per target

Fixed hal.h definitions for switches & ADC inputs

Tools to generate hardware definitions from current hal.h

generator: add support for EXTx and analog switches

WiP

Add generated header to hardware_defs target

Add support for ADC input direction and index per GPIO port

Incredible: it compiles

Removed StdPeriph ADC driver

Works on QX7

Works on TX16S (VBat missing)

Switch driver using generated switches for stm32 targets

Switch driver with generated switches for simu

Use switch names from switch driver

Fixed single conversion handling

Fixed horus VBat reading

Added switch name

Fix warnings about bitfield offsets and GCC 4.4

This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.

Switches has already been moved to generic driver

Jitter measurement for each sample, not just for oversampled values

Moved periph clock init to the ADC driver

ADC & GPIOs.

Add switchInit() to init pins

Fix NV14 CMake

Fix taranis target

Fix NV14 (again)

Model audio files: use new interface for switch index

Fix X9-lite

Fix simu headers

Fix getSwitchName()

Add support for ADC switches

Fix switch warning YAML

Test only switches which are defined

Conversions tests for QX7 only on QX7

Fix X12S

Fix function switch names

Enable ADC periph clock before initialising channels

NV14: offset inputs for the sticks & fix switches

WiP: get rid of VSRCRAW and some more

Simu shall use normal ADC driver

fix x7

fix nv14

Fix 9x nav

fix 212x64

fix xlite

fix x9e

fix simu lib

fix unit tests

fix x7 tests

PWM stick values should be written directly into adcValues

... just like FlySky sticks.

fix x12s

fix nv14

Add some support for SPI ADC (only unit tests)

Remove `jq` usage

fix generate_yaml.py for newer libclang

fix pot config

fix stick names

Some YAML generator improvements

Max 16 Pots on COLORLCD

Fix some source names

Use 10 bits for switches to prevent overflow

Removed horus constants for switches & ADC inputs

Fix unit tests

Fix curve edit

Fix libsimulator

Fix function switches (tpro)

Refine ADC & analog API

Moved hardware definitions scripts and templates into own dir

cleanup API refine

Fix unit tests

Mixer: apply calibration only on required inputs

Place ADC switches after all other ADC inputs

Fix X12S

Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW

Cleanup redundant generated YAML parsers

Fixes Boxer rebase

Add boxer to generate-hw-defs.sh

Obsolete LUA exports

Add boxer ADC_DIRECTION

Split generate_hw_defs.py into multiple files

Some cleanup (+ LUA switches)

Fix AXIS definitions

Fixed translation strings declarations

Some rebase fixes

Remove some useless StdPeriph drivers

fix: set pin mode to reset state on usart deinit

fix: use canonical names for calibration data

fix: ADC driver does not care about unconfigured inputs

fix X12S ADC

Add support for ADC conversion chaining

Better X12S ADC implem

Moved X12S ADC driver to HAL/LL

Improve ADC driver separation

Fixed taranis & nv14

Moved PWM gimbals to HAL/LL

Removed useless TR_EXTRA_VSRCRAW

Fixed include guards

Small fixes

Renamed control inputs

Moved internal and external module pulse driver def to boards

Move more things to the generic_stm32 board

Remove STR_VMIXTRIMS

Added analog labels

Generate main control names

Misuse labels / short labels for main controls

Backward compatibility: sliders and legacy names

New keys driver

Let's get rid of StdPeriph headers in simu

Add jinja2 to CI workflows

Use `grep` instead of `sed`

chore: add python jinja2 oto msys setup script

Removed more static definitions and use dynamic ones instead

Fixes X9E

Fix x7 nav too

212 switch display

Fix default sliders

Removed NUM_STICKS

212 switch display working nicely

Surface radio 'stick' replacements

fix: switch, trim & rotary pin init

Remove old key drivers

Removed VKEYS

Removed ETX_FOURCC

Fixed SURFACE_NAME

Removed TR_VSWITCHES & TR_TRIMS_SWITCHES

Fix xpot switches

Store calibrated analogs in physical order

Use getSourceString in drawSource

Implement missing YAML read/write

Fix isSourceAvailableInInputs()

Fix isSourceAvailable()

Some surface fixes

Fix CLI debug

Ported colour UI of analog diagnostics to new ADC API

Small fixes

Better input mapping

Minor tpro fixes

Fix trims available

Remove TX mode choice on surface radio

Rename surface controls

Channel order alignement

Fix throttle warning

Fix checkTrims()

Fix pot config casting issue

Fix IS_SWITCH_FS()

Fixed input mapping

Fix fswitch auto-switch

Fixed storing / reading function switches in YAML

Fix enableVBatBridge() / disableVBatBridge()

Fix interesting mode conversion

Fix sources issues

Fix special funnction list

Proper function switch handling

128 GUI improvements

Fix compilation

Boxer cosmetics

128 hardware screen cosmetic

Fix TX12 switches

More switches fixes

Simplify CPU type handling

Fix flash size

Fixed page-up / page-down in libopenui
2023-06-25 14:32:39 +02:00
cb533f4493 fix(AFHDS3): Sync UI with Flysky AFHDS3 module stored settings (#3501)
* Refresh UI module settings when AHFDS3 config is updated.

* Fix scroll order for module options when 'FlySky' module type selected.
Fix simulator crash issues related to FlySky module.

* Fixed UI refresh problems in UI widget ordering fix.

* Refresh config when receiver is connected.

* Disable change of bind time options when receiver is connected.

* Rename methods to better distinguish between buffer fill or actual send.

* Clean and tidy up AFHDS3 state flow.

* Implemented settings sync upon setting changes.

* Added RF power settings for IRM301/FRM303.

* Added RF power sensors for FRM303.

* Fixed config not saved and only FRM303 supports RF power settings.

* Fixed RF power command error.

* Fixed a crash for IRM301.

* Always check if port exists and return nullptr for driver.

* fix: Make Companion preserve settings *as is*

---------

Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2023-06-19 19:00:02 +08:00
philmozandGitHub 5327c890f2 feat: Add options to disable radio and model menu tabs (#3484)
* Add options to disable radio and model menu tabs.
- Update radio and model data structs
- UI for color LCD radios
- Convert existing 'noGlobalFunctions' property.
- Language strings.

* Make 'theme' control specific to color LCD radios.

* Add B&W radio UI.

* Simplify code, reduce compiled code size.
Fix page count display on model select tab.
Fix GVARS for 212x64 radios.

* Collapse timer sections if timer is off.

* Remove 'Use global functions' checkbox from B&W model setup.

* Make preflight checks, throttle and view options sections expand & collapse (default collapsed).

* Fix build.

* Add view options to companion data classes, save and load values in YAML files.
Fix scrolling for radio setup view options.

* Add Companion UI for view option settings.

* Remove 'Mixes' from list of tabs that can be hidden.

* Updated Companion UI from elecpower.

* Use view options flags to enable/disable functionality:
- skip heli mixer logic if heli not enabled
- Remove heli, gvars and telemetry options from source selection if not enabled

* Remove 'flight mode', 'curve' and 'global variable' settings from input & mix editors if option disabled.

* Rename 'View Options' to 'Enabled Features'.
Put GVAR option under Flight Mode and indent text.
Make relationship between FM and GV more obvious.

* Remove global variable option dependency on flight modes.
Hide FM1-FM8 in global variables if flight modes hidden.

* Hide 'Custom Mixer Scripts' in source selection menu popup if disabled.

* Add translation strings for Hebrew language file.

* Fix typo. Add comment for double call to setCurrentTab.
2023-05-22 20:08:16 +10:00
MichaelandGitHub 04359757c4 fix: Update built-in Multi-protocol module protocol lists, single source for firmware and cpn (#3435)
* - Concentrated Multi protocol definitions into a consistent single source. Actually two .h files, one for the protocol list and names, the other for subtypes and capababilites, see comments in .h files as to why

- updated available protocols reflecting 1.3.3.20 (15+ protocols)
- fixed Companion always showing f/s and channel map options in model setup disregarding the protocol capability

* Following @pfeerick's review: changed heaeders and typos

fixed Ubuntu runtime error on assert
fixed change of Multi protocol not triggering writing yaml file

* corrected copy/paste error

* fixed FrSky index juggling

* Updated Multiprotocol database to current MPM project status (ref. MPM Multiprotos.ino)

- changed protocol name FX816 to FX
- added Flysky AFHDS2A options PPM and PPWM SBUS 16ch subtypes "PWM,SB16" and  "PPM,SB16
- added V761 option to select TOPRC
- added FX options "816" and "620"
- added FRSKYR9 option "-- 8ch"

* MPM protocol scan excludes some protocols which are not meant to be selected. For Companion and Simualtor (and for radios if there is no MPM connected) this was handled in different places with outdated information. Harmonized and centralized the handling of non-selectabale protocols into the single source for all companion, Simulator and all gui types.

* More cleanup:

- changed some MPM protocol names to the ones the MPM delivers with MPM protocol scan to harmonize names between CPN/Simulator/radio
- added XN2927DUMP and MOULDKG to the list of excluded MPM protocols just like the MPM does with MPM protocol scan
- added new option value limits and moved definitions to single source
- adapted CPN and radio to use common definitions of option values for all GUI types
- moved distributed MPM (as far as possible) to one coherent place under a single #if defined (MULTIMODULE)
- fixed option value not reset at change of protocol
- some editorial stuff

Note: There is still some work to be done on CPN GUI option values. DSM2 servo rates are hard coded, BAYANG telemetry options are only shown by index and not by text as in radio code, AFHDS2A servo update rate is shown as index too which is to no use for users.

I'll try to fix all this in the next session, but request to get rid of BAYANG telemetry options translations. It is much easier to define a common string list by using untranslated.h

* rebase due to fr.h

* resolve merge conflict with main fr.h

* more cleanup:

- deleted multiple definition of MM_RF_CUSTOM_SELECTED in favor of single source define
- bw radios: change to only allow defined protocols rather than a fixed 127 protocols

* Changes:

- magic sentinel number 0xfe as define
- add 10 NN protocol entries for future use of new MPM protocols not yet defined in ETX (still recommend timely ETX maintenance update if MPM releases new firmware)

* Changes by @elecpower:

- align field labels to radio
- change servo update frequency from combo box to spin box with edit only via up/down arrows to stop invalid values being entered via keyboard. Remove frequency list used to populate combo box as only used by Companion.
- add validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.

* Changes:

- radio: added validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.

* CPN: use sentinel define

* cpn: Sort multi protocols list (courtesy @elecpower)

* fixes #3480

changes:
- moved FrSky subtype defines to MultiProtoDefs.h
- updated bind_button_driver.cpp

* missed replacing one instance of setMultiProtocol()

* changes:

- editorial change
- added multi option to OMP protocol (ref #2713)

* rather go for STR_MULTI_RFTUNE because MPM manual talks about RF tune

* made XN297_DUMP selectable (available with MPM debug fw only)

* corrected merge mistakes
2023-05-22 20:07:29 +10:00
MichaelandGitHub 5db37e2a2b feat: Support for ext. Multiplex MLink JR type module (#3352)
* introducing external MLink module telemetry as module PPM subtype

* implemented fix for sensor discovery display not showing all detected sensors (is in separate PR too)

implemented PPM subtypes in Companion

* add PPM subtype to model printer

finalize subtypes for PPM in Companion

* added logic to try to use HW UART with inverters turned off first (e.g. NV14), then, if not successfull use soft serial inverted (== uninverted data due to HW inverters on PCB)

changed start bit detection IRQ priority from 5 to the previous 0 (also in separate PR)

* extended telemetry timeout to 2s due to slow Mlink RSSI update rate

* changed the "NOTLM" sub-type texts to:

- "No Telem" for 128x64 (this is the max numbers of characters it can take)
- "No Telemetry" everything else including Companion

* Companion:

- lower case 1st charachter on PpmSubTypeStrings to ppmSubTypeStrings
- added telemetry hooks for ppmSubTypeStrings stringx

* simplified serial port initialization for MLink telemetry

* editorial change: corrected obsolete comment
2023-05-16 11:22:47 +10:00
philmozandGitHub 140c700e1e fix(color): 'lastopened' value not loaded on startup if stored hash not up to date (#3521) 2023-05-07 11:09:20 +10:00
philmozandGitHub 6985d3f24b feat(color,cpn): Updates to the model telemetry page, sensor ID consistency (#3401)
* Add 'Show Instance ID' button to telemetry page to show/hide sensor instance number (default is hidden).
Fix issues with page refresh when all sensors deleted.
Select closest sensor when a single sensor is deleted.
On change, only refresh the sensor list instead of the whole page.
The 'showInstanceIds' property is saved to the model file.
Update Companion to save/load 'showInstanceIds' in model YAML file. Add checkbox to telemetry edit page.

* Update all radio specific files.

* Keep focus on 'Discover/Stop' button when searching for new sensors.
Start sensor ID index at 1 to match B&W radios.
Keep focus on changed parameter when editing sensor, don't rebuild entire parameter list on change.

* Display actual 'instance' ID instead of 'instance' + 1.

* Fix incorrect ID when reloading simulator data.

* Fix incorrect ID when reloading simulator data on B&W radios.
2023-04-17 18:44:44 +10:00
f935ce8c2b feat(color): Add layout 4+2B right side 3QRT+1QRT (#3315)
* Add layout 4+2B right side 3QRT+1QRT

* Fix Layout 4+2B LayoutId, length max 9 char

* Maybe this will work?

---------

Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2023-04-10 12:00:59 +10:00
philmozandGitHub 227780d784 feat: Add 'repeat' option to 'Lua Script' special function (#3338)
* Add support for the '1x' repeat option for 'Play Script' special functions.

* Add Companion and B&W radio support.

* Fix B&W radio logic and layout.

* Add translation hooks.
2023-04-10 11:00:50 +10:00
philmozandGitHub 92651429a2 feat(color): Use generic YAML parser to save/load Theme yaml files (#3346)
* Change ThemeFile class to use generic YAML parser instead of hard wired code.
Fix handling of empty input lines in YAML parser.
Increase size of YAML parser variables to handle theme 'info' property length.

* Update comment.

* Fix error.

* Proper fix for blank lines in YAML file.

* Fix YAML blank line handling (attempt 3).

* Ensure theme YAML file is backward compatible.

* Store selected theme in radio settings instead of selectedtheme.txt file.
On start, if radio settings theme is empty, try and load from selectedtheme.txt file.
In Companion, save/load the selected theme in the radio settings YAML file; but no UI to select theme.

* Update selected theme name in radio.yml if the theme name was edited.

* Only save 'selectedTheme' in Companion on color LCD radios.
2023-04-09 13:32:30 +10:00
661657feca feat: New advanced joystick mode on radio, improvements to Companion and Simulator joystick support (#3111)
* Allow switches on the connected radio to control switches in the simulator via the joystick interface.

* Merge configurable radio joystick interface from banyaszg.

* Add two more 'axis' channels to companion.

* Fix 6POS from USB joystick to simulator.

* Reduce data size.

* Fix build error on B&W radios.

* Add 'Companion' button mode to work with the button logic in the Companion app.

* Build Companion joystick setup layout at runtime.
Change #define names for simulator joystick.
Allow 15 axes and 32 buttons.
Initial support for trim sliders.

* Remove custom joystick button type for companion - use 3 buttons per switch in companion to control simulator switch state.

* Fix joystick constructor calls parameters. Connect some radio joystick trims to simulator widgets.

* Restore 'companion' button type to reduce number of buttons needed. Make trims work via buttons in USB joystick.

* Connect joystick trim buttons to simulator widgets.

* Use companion source names for trims.

* Add encode / decode of usb joystick custom settings to Companion.

* Convert to lvgl layouts.
Update language files.

* Fix generated YAML storage files.

* Fix initialisation error when editing button channel. Cleanup code.

* Fix rebase.

* Fix refresh of joystick channel list view after editing an entry.
Companion joystick config window uses two columns.

* Fix vertical joystick inversion bug.
Change stick axis labels.

---------

Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
2023-03-22 10:31:29 +10:00
312a2358dc feat(color): Increase max possible widget screens to 10 (#3073)
* Elevate telemetry screen count from 5 to 10 on color radios.

* Cpn increase max custom screens

* fix(color): Missing Add tab button on max-1
addTab was not called when adding screens dynamically

---------

Co-authored-by: elecpower <neilh713@tpg.com.au>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2023-03-16 17:13:11 +10:00
Malte LangermannandGitHub ae6dc8ea27 fix(yaml): Potential unaligned access when reading/writing switch warning positions (#3232)
It IS unaligned for the X9E
2023-02-22 20:44:32 +10:00
Malte LangermannandGitHub c3516b54c1 fix(yaml): String compare not comparing to full string length (#3215)
The string compare only matched the number of characters found
in the yaml file, so "SLIDER1" matched "SL" on the X9E
2023-02-20 11:01:58 +10:00
Raphael CoefficandGitHub 72193eda82 chore: New module/serial API (#3055)
* WiP: new module interface

* WiP: softserial timer DMA

* WiP: setup() and send() in one step

and remove methods specific to internal or external module

* fixes and extra port config

* horus targets

* module ports have moved

* T8 support (only internal module)

* fix nv14

* stupid GCC....

* disable BT

* remove nv14 telem driver

* remove old aux serial driver

* Move module buffers out of pulses.h

* Soft serial fixes and PXX1 support

* Fixed PPM module output

* Fixed CLI

* compilation fixes

* Ported bluetooth and flysky gimbal to new serial driver

* Re-enable soft-serial RX

* fixes and cleanup

* nv14 fixes

* Fix flysky gimbals

* Ghost module

* 16 bytes of RAM

* Remove getByte from module API

* Ghost cleanup

* fix: _half_duplex_input() must be called after usart init

* WiP

* more cleanup

* Remove board specific settings from PXX1 / PXX2 drivers

* A bit of PXX2 header cleanup

* Add support for OVER8 and ONEBIT

* Add some support for inverters (NV14 / EL18)

* Support NV14 power fixes in generic board

* Fix polarity handling

* Fix RX DMA

* Fix mixer not running

* Add soft-serial polarity control

* Quick fix for telemetry polling while module port is changed

* Fix bootloader DEBUG

* Fix MPM telemetry

* Fix pulse start

* DSM2 soft-serial fallback

* DSMP async module restart

* Fix CRSF LUA upstream

* Remove global variable telemetryProtocol

* Use HAL/LL constants

* Fix various issue with AFHDS3 and NV14/EL18 internal module

* Fixed S.PORT unit tests

* fix: update widx after writing at current index

* fix: init error condition

* Fix: possible infinite loop in _find_port()

* Add support for bidir S.PORT init

* Add support for "getLastByte" in HW serial driver

* PXX1: Add support for S.PORT based on IDLE callback

* Fix rebase error

* Fix softserial _rx_fifo_push()

* Add softserial support for waitForTxCompleted()

* Fix MPM flashing (internal / external)

* Fixed external MPM

* Activate RX DMA on internal module

Seems to work with serial passthrough without issues, at least on the L3R PRO.

* Fix softserial DMA on stdlcd F4 targets

* Add softserial support for 32bit timers (mostly TIM2)

* More precise soft-serial

* Fix MPM update using inverters & HW uart

* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input

* Remove useless delays

* Fix flashing external ELRS module

* Added a retry mechanism for FrSky S.PORT update

* Remove useless enableRx()

* External FrSky modules are all flashed via S.PORT

* Remove power management unit update

This was only used on the first batch of X-lite.
2023-02-09 19:44:32 +10:00
46cc979875 fix: Regenerate yaml, carryTrim => trimSource cleanup (#3121)
PR #2995 didn't take into account the data model storage actually does change when you change a variable name. 
Boxer yaml generation was missed in earlier PR. 

* chore: Run `generate-yaml.sh`

* chore(cpn): carryTrim -> trimSource

* fix(build): Boxer missing from `generate-yaml`

* dodgy attempt to read old carryTrim

* fix: Don't break the byte boundary + reorder

* fix(yaml): indentation for attributes that should not be output

* chore: Regenerate YAML after rebase

---------

Co-authored-by: raphaelcoeffic <raphael.coeffic@frafos.com>
2023-02-05 13:46:02 +10:00
Raphael CoefficandGitHub 57bf180a9b feat(mpm): remove FrSky special treatment madness (#3032) 2023-01-26 11:44:46 +10:00
eshifriandGitHub 8e8e78671a feat: Timer Voice & Haptic option, show elapsed speak time value when countdown (#2711)
* fix "odd" elapsed time announcement

* announce elapsed seconds

* Add support for "Beeps and Haptic" and "Voice and Haptic" for timer countdown.
2023-01-23 20:00:12 +10:00
philmozandGitHub 7dc2f89917 fix(ui,cpn): Error in value conversion when loading LS data (#3026)
* Fix error in value conversion when loading logical switch data from YAML files (for 'Edge' and 'Timer' functions).

* Remove debug print.

* Fix handling of telemetry sensors in Companion.
2023-01-17 14:35:13 +10:00
3djcandGitHub bc8087cbf1 feat: Add Radiomaster Boxer (#2877)
* Radiomaster Boxer

* chore: Add Build system bits

* chore: `EEPROM_VARIANT` no longer used
2022-12-31 16:45:09 +10:00
Raphael CoefficandGitHub f9bac7ba9b chore: Remove support for binary storage format (#2900) 2022-12-23 13:05:57 +10:00
philmozandGitHub 3f08af6120 feat(color): Quick Model Select, keep active model in view when changing labels (#2895)
* Fix rebase merge issue.

* Incorporate solution from @ParkerEde in PR #2626

* Fix selection logic for models.

* Select model on first press.

* Fix quick model selection when using scroll wheel & enter button.
Add setting to enable quick model selection.

* German translation.

* Fix behaviour when 'model quick select' is off to work like existing 2.8 logic.

* Add translations.

* Prioritise active model as selected model when the set of visible models changes.

* Fix selection ordering when using scroll wheel.
Minor code cleanup.
2022-12-23 09:58:49 +10:00
Raphael CoefficandGitHub 06c359f096 feat(ACCESS): Configure AUX serial port as "External module" (#2562)
* Enable RX DMA on external module USART

* feat(ACCESS): configure AUX serial port as "External module" (#2562)

This allows configuring the external access mod on runtime rather than by compilation option.

* fix: fetch external module driver
2022-12-14 18:41:32 +10:00
Raphael CoefficandGitHub 6f494e109c feat(telemetry): extend link quality warnings range (#2251)
* feat(telemetry): extend link quality warnings range

* Set default values to the old legacy FrSky values

* Companion support
2022-10-12 14:28:32 +10:00
CliffandGitHub 5b6fac36c6 fix(color): Move mdls not in models.yml to /Models/Unused (#2397)
* Move models.yml that don't exist into /Models/Unused

* Add sdMove, Translations, move both models.yml

* Comments, break loop, rmv extra bool.

* Show Press_Any_Key on dialog

* Translations

* Always create /Models/UNUSED if models.yml exists.

* Close directories
2022-10-01 11:29:16 +10:00
RistoGitHubNiel Horne (elecpower), Raphael Coeffic (raphaelcoeffic) and Peter Feerick (pfeerick).
9dc4065525 feat: Add support for SpaceMouse mod (6D input knob) (#1853)
Use `-DSPACEMOUSE=YES` CMake option to activate on Horus color targets.
Co-authored-by: Niel Horne (elecpower), Raphael Coeffic (raphaelcoeffic) and Peter Feerick (pfeerick).
2022-09-18 09:23:48 +02:00
CliffandGitHub 333c2828ea fix(color): Limit label lengths, improve lbl display, prevent inv. char (#2287)
* (cpn) Add bullets & length warning

* (fw) Show labels with bullet separators

* (fw) Check all running twice. Remove from here

* (fw) Correct buffer overflow when labels too long

* (fw) Rem bullets in model label string

* (fw, cpn) Labels length

cpn,fw Limit label length
cpn Check correct model on rename length
cpn Focus issues
cpn Add rename,  move up/down.. still has an issue with selection. TODO...
cpn Switch to utf8 encoding
cpn Rename button ;)

* (cpn) Move up down working

re-Fix Checkbox, partially isn't what I thought (not greyed)

* (fw) Add CSV string funcs

Limit length of model edit shorter in portrait mode

* (cpn) Correct Label option showing on B&W

* (fw) Radio filename set but no file exists don't create

* (cpn) Simplify wording

* (fw) Correct debug values

* (fw) Reduce truncation length

* (both) Don't allow special chars in label name

(cpn) Prevent move when at top and bottom
(fw) Remove multiple label length defines
(fw) Shorten truncate length even more

* (fw) Close model_select on new model
2022-09-18 10:47:21 +10:00
Peter Feerick 7a06eb1d96 chore: LiteRadio3 yaml regenerate
Fixes issue where settings were being corrupted due to misalignment
2022-09-09 22:28:59 +10:00
4e49ac68be feat(colorlcd): Special Function to set main screen (#2160)
* Special Function to set main screen (#2135)

* chore: Add new SF to LUA constants list

* Companion support

* Formatting

* get rid of magic number

* Add function to get the number of custom screens

* Change screen numbering from 0-based to 1-based.

* Allow SetScreen custom function for Color LCD only

* add range protection

* cleanup

* yet, range protection once again

* fix: paintSpecialFunctionLine can't alter SF param data

* Fix screen initialization in companion

* move screen switching to the UI

* Trigger view change from guiMain()

* chore: Change "SET" to "Set" for consistency

* fix: Somehow missed extra comma in `TW`

Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
Co-authored-by: Raphael Coeffic <raphael.coeffic@frafos.com>
2022-09-07 21:40:34 +10:00
dlktdrandPeter Feerick 4067c6df07 (fw,cpn) Support commas in labels
Remove more cpn unused code
2022-09-06 21:04:10 +10:00
dlktdrandPeter Feerick 9a481d6837 (fw) Better handling for blank Labels in labels.yml 2022-09-06 21:04:10 +10:00
David PHAM-VANandPeter Feerick c103abb58b Fix 32 bits negative values YAML saving 2022-09-06 19:53:12 +10:00
c8693569b0 feat(color): New label based Model Selector (#1374)
* Model Labels Selector

* Portrait Layout

* Receiver ID Check

* Fix Labels .yml format

* Companion Initial Commit

commit 967ddf3979b4954402fe62c858faba4b7a416bba
Author: dlktdr <cblackburn320@gmail.com>
Date:   Mon Aug 29 01:49:15 2022 -0700

    Fix Labels .yml format

commit 534221cad9e01146c47a9ac1080a655e04f1f6c8
Author: dlktdr <cblackburn320@gmail.com>
Date:   Mon Aug 29 01:20:57 2022 -0700

    Receiver ID Check

commit f32c0939d44e9ae60bc0705a9176354c23fec198
Author: dlktdr <cblackburn320@gmail.com>
Date:   Sun Aug 28 23:13:25 2022 -0700

    Portrait Layout

commit 961181217c7841ff3f21299ac6aa419b810f80e9
Author: dlktdr <cblackburn320@gmail.com>
Date:   Sat Dec 11 16:56:13 2021 -0800

    Model Labels Selector

commit dc99dd40d2
Author: David PHAM-VAN <1387855+DavBfr@users.noreply.github.com>
Date:   Fri Aug 26 03:04:34 2022 -0300

    feat: Allow Lua widget to override built-in widget with same name (#2208)

    * Allow CPP Widgets Override with LUA

    * Reset a widget option it the type differs

commit 4b747caff9
Author: eshifri <46511024+eshifri@users.noreply.github.com>
Date:   Thu Aug 25 19:47:53 2022 -0700

    fix: Write model name into models.yml when duplicating model (#2224)

    * Update model name in the models.yml file (#2214)

    * Fix the length of the name.

commit e97f23a305
Author: eshifri <46511024+eshifri@users.noreply.github.com>
Date:   Wed Aug 24 21:19:52 2022 -0700

    fix(cpn): Fix full path to model notes for Simulator (#2223)

* Correct Highlighted Column

* labels .yml indentation

* Update da.h

New defines translated to Danish

* Update dataconstants.h

Omit warnings due to difference of LEN_MODEL_FILENAME and LEN_MODEL_NAME in modellist.cpp

* Update modelslist.cpp

Wonder if this are the right file in PR #1374 (?), seems a lot are changed to the better in #1374

* Update dataconstants.h

Restore #define for LEN_MODEL_FILENAME to 16

* Rebase, Correct Issues

Delete now deletes instead of select
New model stores correct information
Duplicate save all information in cell
Rework items to use cell over button
Reword function variables

* CMPN: Add context menu

Fix output not functional. Removed Yaml::null at some point :)
Fix some compiler warnings

* CMPN: Compiler warning, replace ,->_ in list

* FW: Various Changes

Change view to a grid
Don't allow comma in label name
Add scroll indicators
Save sort order

Co-authored-by: HThuren <99370924+HThuren@users.noreply.github.com>
2022-09-03 09:01:19 +10:00
e576925bee feat: Reduce risk of corrupt radio.yml (#1481)
* reduce risk of corrupt radio.yml #1412

Adds CRC16 checksum to radio.yml when saved.
Adds save to temporary file, folowed by rename to radio.yml
Adds check on load, with fall-back to temporary file

* Made sure that only the first read block of radio.yml is checked for the 'checksum' value.
Added checksum generation on radio.yml produced by conversion.

* Added namespace.
Github actions triggered build failed on this - compiler difference.

* Fixed typo in code not run locally.

* Made checksum result code a enum class.
Fixed null-poionter dereference bug.

* Added check and handling for radio.yml file not read (will be handled as if checksum failed)
Added evaluation of checksum when radio_new.yml is read.
Added f_unlink() calls before f_rename() to ensure the target filename does not exist.

* Added radio.yml cheksum handling to Simulator/Companion.
Cleaned radio firmware handling of checksum field up to be newline agnostic.

* Added handling of files without checksum.
- Letting files pass the check if no checksum field is present (old files) and the size is realistic (25 bytes)

* Fixed bug causing new conversion from binary if no radio.yml BUT a radio_new.yaml
is present in the filesystem.

Now the conversion is only performed if neither file exsits.

* repair rebase problems

* rerun yaml generator

* fix another rebase problem

* update text in companion to be more meaningful when the radio.yml file has a checksum error
fix wrong error message in trace

* add trigger to check radio config when leavin menu_radio

* fix: add handling for temporary and error yaml radio settings files to simu/simulator/libsimulator

* fix corner cases when comverting non crc-ed files

* chore: Tweak radio data warnings for screen sizes
- Changed the define to be a little shorter
- Added missing define for TW
- Three string lengths to suit 128, 212 and basically colorlcd

Co-authored-by: gagarinlg <malte@langermann.net>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2022-08-31 12:56:17 +10:00
Peter FeerickandPeter Feerick e40e7ccc68 chore: Regenerate yaml 2022-08-20 10:59:50 +10:00
zhaobingandPeter Feerick 0219426b26 Add LR3PRO as an independent target 2022-08-20 10:59:50 +10:00
Raphael CoefficandRaphael Coeffic bb6c6d6e2d WiP PoC AFHDS3 internal module 2022-08-11 12:15:46 +02:00
62692dba6a feat: More rotary encoder options for B&W screens (see #2045)
* First build

* Fix X9

* Update api_general.cpp

* Update translations.h

* clean up translations

* fix: B&W option handling, remove magic numbers, cleanup
- Remove references to invertRotary, change to RotEncDir or similar
- Add compatabilty importing to companion, firmware
- Rename Lua API call
- Move magic numbers to enum
- Improve B&W option handling so it doesn't apply changes while in menu

* chore: yaml regen

* fix: Add missing guards for X9D/X9D+

* fix: Wrong enum name in simu

* fix(cpn): Use correct names for UI elements

* fix: Translations

* fix: Allow `rotEncMode` in all yaml due to x9d var
Of the three X9D variants, the X9D+2019 is the only one that
has a rotary encoder as standard. However, as the base config
file is for the X9D, this meant it wasn't reading or writing the
config value. Rather than add a seperate config file for it for
a single variable, simple to just allow it across all targets.

* fix: Companion string, change colorlcd to `Choice`

Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2022-08-04 20:06:17 +10:00
be7a6a51ab feat: Allow the timer count direction to be selected (#2038)
* timer direction: ellapsed or left

* Add AUDIO announcement support

* Storage for showElapsed

* Translations

* Fix storage

* BW implementation

* Different BW implementation

* Companion support

* Color LCD implementation and rebase to lvgl

* Fix problems found by raphaelcoeffic

* chore: Regenerate the YAML files properly

* fix: Remove unused `TR_SHOW` remnant

* chore: Formatting and cleanup

* fix: Timer dir choice was shown in wrong place
Wrong newline used in ce23b50

* Fix cpn ui triggers, remove unnecessary code and some formatting

* fix(colorlcd): Hide timer dir opt if zero value

Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
2022-08-03 09:22:42 +10:00
Peter FeerickandPeter Feerick 9e23561184 fix: Reset file permissions
Git is stupid and doesn't let you lock them
2022-07-20 13:01:31 +10:00
3djcandPeter Feerick 03426c9afc yaml generate 2022-07-20 13:01:31 +10:00
3djcandPeter Feerick 8c828172e3 Fix conversions 2022-07-20 13:01:31 +10:00
3djcandPeter Feerick 6010eff024 TX12MK2 initial (external issue with MPM) 2022-07-20 13:01:31 +10:00
Peter FeerickandGitHub 7d983f6fa8 chore(yaml): PR#2064 didn't regenerate files (#2133) 2022-07-17 18:59:21 +10:00
Raphael CoefficandRaphael Coeffic 0b8d93ca88 WiP: support for LSM6DSxx 2022-06-25 16:09:04 +02:00
Raphael CoefficandGitHub c2dc4e6c0b YAML: avoid forcing to add parser for non-existing old format v220 (#2068) 2022-06-21 06:45:35 +02:00
rotorman ae265b6f94 Bugfix missing YAML padding. 2022-04-20 19:32:23 +02:00
rotorman b1a3bc834f User controllable serial port power.
Thx to @raphaelcoeffic for numerous tips with YAML.
Tested with TX16S mkII.
2022-04-18 13:19:33 +02:00
d9b51f8ecf feat: Deadzone option for NV14 sticks (#1777)
Imported from open-flysky/Flysky-OpenTX-Test-Branch

* companion: Don't nuke `stickDeadZone` setting

* Implement data storage properly

* Add missing check for NV14 storage struct sizes

* Formatting

* Use one less byte in the packed data struct
Thanks @raphaelcoeffic :)

* Move setting of stickDeadZone default

* Use a Choice combo rather than NumberEdit

* Good riddance magic number

* Also set default stick zone if setting is missing

* Teach tests about `STICK_DEAD_ZONE`

* Tweak choice width

* Cpn NV14 add stick dead zone to hardware and section labels

* Cpn NV14 align default pot names to radio

Co-authored-by: elecpower <neilh713@tpg.com.au>
2022-04-06 10:30:20 +10:00