* introducing external MLink module telemetry as module PPM subtype
* implemented fix for sensor discovery display not showing all detected sensors (is in separate PR too)
implemented PPM subtypes in Companion
* add PPM subtype to model printer
finalize subtypes for PPM in Companion
* added logic to try to use HW UART with inverters turned off first (e.g. NV14), then, if not successfull use soft serial inverted (== uninverted data due to HW inverters on PCB)
changed start bit detection IRQ priority from 5 to the previous 0 (also in separate PR)
* extended telemetry timeout to 2s due to slow Mlink RSSI update rate
* changed the "NOTLM" sub-type texts to:
- "No Telem" for 128x64 (this is the max numbers of characters it can take)
- "No Telemetry" everything else including Companion
* Companion:
- lower case 1st charachter on PpmSubTypeStrings to ppmSubTypeStrings
- added telemetry hooks for ppmSubTypeStrings stringx
* simplified serial port initialization for MLink telemetry
* editorial change: corrected obsolete comment
* Translation for range test
* Translation for range test
* Translation for range test
* Reviewed translations for 9 languages
Reviewed translations for 9 of 11 actively translated languages
* Translations for Chinese and Taiwanese
* Add 'Show Instance ID' button to telemetry page to show/hide sensor instance number (default is hidden).
Fix issues with page refresh when all sensors deleted.
Select closest sensor when a single sensor is deleted.
On change, only refresh the sensor list instead of the whole page.
The 'showInstanceIds' property is saved to the model file.
Update Companion to save/load 'showInstanceIds' in model YAML file. Add checkbox to telemetry edit page.
* Update all radio specific files.
* Keep focus on 'Discover/Stop' button when searching for new sensors.
Start sensor ID index at 1 to match B&W radios.
Keep focus on changed parameter when editing sensor, don't rebuild entire parameter list on change.
* Display actual 'instance' ID instead of 'instance' + 1.
* Fix incorrect ID when reloading simulator data.
* Fix incorrect ID when reloading simulator data on B&W radios.
* Fix the BUG of V0 receiver setting IBUS SBUS; add the setting item of INRM301.
* Fix check failure; remove some unused characters.
* Fix typos and rename variables as well as fix compilation errors.
* add language
* better_debug_name_on_statistics_page
* chore: Translations for Lua related strings
* chore: More translation strings for stats screen
* chore: Padding for STR_MS, STR_BYTES
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* chore: Change Radio setup page headers
* chore: Model Setup page header changes
* Main menu, Model Manager, Model Templates
Including needed translation strings
* Model telemetry sensor edit page
Taking into account sensor value shown in header
* chore: Change "Edit Labels"
Resolves#3014
* fix(b&w): "Rx channel ord" -> "Def chan order"
Resolves#3348
* chore: Update translations
* chore: Change to prefered "Manage Models"
* chore: Cleanup
* chore: Move some colorlcd-only strings
May or may not save some flash memory
* fix: Missed a translation string rename
* Allow switches on the connected radio to control switches in the simulator via the joystick interface.
* Merge configurable radio joystick interface from banyaszg.
* Add two more 'axis' channels to companion.
* Fix 6POS from USB joystick to simulator.
* Reduce data size.
* Fix build error on B&W radios.
* Add 'Companion' button mode to work with the button logic in the Companion app.
* Build Companion joystick setup layout at runtime.
Change #define names for simulator joystick.
Allow 15 axes and 32 buttons.
Initial support for trim sliders.
* Remove custom joystick button type for companion - use 3 buttons per switch in companion to control simulator switch state.
* Fix joystick constructor calls parameters. Connect some radio joystick trims to simulator widgets.
* Restore 'companion' button type to reduce number of buttons needed. Make trims work via buttons in USB joystick.
* Connect joystick trim buttons to simulator widgets.
* Use companion source names for trims.
* Add encode / decode of usb joystick custom settings to Companion.
* Convert to lvgl layouts.
Update language files.
* Fix generated YAML storage files.
* Fix initialisation error when editing button channel. Cleanup code.
* Fix rebase.
* Fix refresh of joystick channel list view after editing an entry.
Companion joystick config window uses two columns.
* Fix vertical joystick inversion bug.
Change stick axis labels.
---------
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
* Add padding to 'Trims' and 'Throttle' setup pages.
* Add padding to pre-flight checks page.
Make button size consistent.
Fit more buttons per row,
Display proper pot and slider names for center beeps.
* Add padding to radio setup pages (Sound, Vario, Haptic, Alarm, Backlight and GPS).
Move backlight inactivity timer to its own line and add a label (requires translation).
* Update translation.
* Hide Backlight controls that are not relevant to the backlight mode selected.
* Update translation.
* Update translation.
* Update translation.
* Update translation.
* Update translation.
* Convert theme select, theme edit and color edit pages to LVGL flex.
Add 'Edit Color' string to language files (requires translations).
Simplify theme edit 'onCancel' logic.
Fix size of buttons in ConfirmDialog for portrait layout.
Truncate item strings in ListBox to fit available space.
Set window background color on Page and TabsGroup classes instead of using 'paint' function.
Replace strncpy and strncat with strAppend - avoid possible unterminated strings and string overrun.
Truncate display of long name and author strings in theme pages.
* Revert code to truncate ListBox entry strings as it causes other issues.
* Adjust layout for theme color editor to fit large hex string size.
* Remove unnecessary copying of the ThemeFile object being edited.
Refresh TabsGroup page background color when theme changes.
* Set selected theme in list on long press as well as short press.
Comment out unused 'title' in ListBox.
* Handle default theme like custom themes on SD card:
- show logo when selecting theme
- support background_WxH.png names for background images
Use f_stat( via isFileAvailable) instead of opening and closing files to check for existence.
* Remove debug print.
* Fix rebase.
* Adds option to align value widget label and value to left, center or right border of the widget zone.
* Cpn sync
* Typofix thx to @Eldenroot
* fix: Add `TW` translation
* fix: Two spaces for indent
---------
Co-authored-by: elecpower <neilh713@tpg.com.au>
* - all telemetry sensor name definitions in one place (untranslated.h)
- all telemetry sensor name definitions follow the naming convention STR_SENSOR_<sensor>
- eliminated one redundant definition
- editorial updates to telemetry protocols code to reflect the naming convention changes
- re-introduced translations in da.h (STR_SENSOR_THROTTLE and STR_SENSOR_SPEED)
- re-introduced translation in it.h (STR_SENSOR_GPSDATETIME)
- re-introduced translation for fr.h ( STR_SENSOR_BATT)
- saved 160 Bytes of flash
* removed obsolete translation
saved 280 byte flash memory in total
* finally removed extern const char STR_MENUTEMPLATES[]; definition
adjusted da.h, fr.h, it.h local sensor name definitions to naming conventions STR_SENSOR_<senosr>
* corrected merge
removed obsolete #ifdef
* some more obsolete ones
* added TW and CN translation for TR_PERIOD and TR_INTERVAL
fixed problem in /radio/src/gui/colorlcd/fullscreen_dialog.cpp preventing builds for CZ, IT and FR languages
* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* Convert theme save and delete dialogs to use ConfirmDialog popup instead of full screen alert.
Add strings for translation.
* Update translations.
* Update translations.
* Update translations.
* CZ translation
* chore: Formatting
* Call 'cancelHandler' if RTN button used to exit ConfirmDialog.
* Possible fix for 'save theme' dialog not working in the theme editor.
* fixes https://github.com/EdgeTX/edgetx/issues/2965
Changes:
- the log period range is now 0.1s to 25.5s
- upon creation of a new SD Logs SF the period is initialized to 1.0s
- text "Value" is changed to "Period" to indicate parameter represents the log period
ToDo:
- translations for "Period" if desired
rebase due to #2992
* changed Period to Interval
Added translations for DA, DE, EN, IT, PL
* added defaults for TR_INTERVAL to language files
* fixed problem with too many leading zeros for intervals less than 1s.
before: 00.5s
after: 0.5s
* added CZ translations for TR_PERIOD and TR_INTERVAL
changed EN TR_FUNC from "Func" to "Function"
* updated TR_FUNC for CZ, DA, IT, JP, PL
updated TR_PERIOD and TR_INTERVAL for JP
* added TR_PERIOD, TR_INTERVAL, TR_FUNC for SE
* implemented TR_SF_SWITCH and logic to change between TR_SWITCH and TR_SF_SWITCH
* 212x64 radios: single source for #define TR_LSW_HEADERS in language files
deleted redundant defines
* changed 128x64 and 212x64 SF SD Logs to same logic as colorlcd with
- minimum log interval 0.1s
- maximum log interval 25.5s
- default log interval 1.0s
TX12_Sim and X9D_Sim tested ok
* migrated functional changes due to PR #2992
* missed updating TW language file
* fix: Always `STR_SF_SWITCH` regardless of SF
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Add translations for "minutes"
* Add missing PLURAL2
* fix grammar
* Next attempt
* include limits.h
* minor cleanup
* Addin some translations for some languages based on inputs
* chore: Remove BREAKSPACE, add ignore flag
And some minor cleanup / formatting
* chore: Revert `TR_USE_VARIABLE_PLURAL`
Use `TR_USE_SINGULAR_IN_PLURAL` properly... thanks @eshifri
Co-authored-by: eshifri <eshifri@hotmail.com>
* Fix rebase merge issue.
* Incorporate solution from @ParkerEde in PR #2626
* Fix selection logic for models.
* Select model on first press.
* Fix quick model selection when using scroll wheel & enter button.
Add setting to enable quick model selection.
* German translation.
* Fix behaviour when 'model quick select' is off to work like existing 2.8 logic.
* Add translations.
* Prioritise active model as selected model when the set of visible models changes.
* Fix selection ordering when using scroll wheel.
Minor code cleanup.
* TR_LEFT_STICK added
* STR_LEFT_STICK added
* Added translation for stick mode
* TR_LEFT_STICK added
* Minor cleanup - removed one commented line of code
* Replaced radio specific define
* Added proper translations from translators
* chore: Whitespace cleanup
* Move models.yml that don't exist into /Models/Unused
* Add sdMove, Translations, move both models.yml
* Comments, break loop, rmv extra bool.
* Show Press_Any_Key on dialog
* Translations
* Always create /Models/UNUSED if models.yml exists.
* Close directories
* fix: Update translation helper for LVGL changes
Also:
- make paths more OS agnostic
- auto-ignore `untranslated.h` since adding to all translations
- flag required parameter as required
* fix: Add more Label related translatable strings
* chore: Italian translations from @robustini
Also some minor formatting tidyup
* chore: Swedish translation from @ulfhedlund
* chore: Danish translation from @HThuren
* Model Labels Selector
* Portrait Layout
* Receiver ID Check
* Fix Labels .yml format
* Companion Initial Commit
commit 967ddf3979b4954402fe62c858faba4b7a416bba
Author: dlktdr <cblackburn320@gmail.com>
Date: Mon Aug 29 01:49:15 2022 -0700
Fix Labels .yml format
commit 534221cad9e01146c47a9ac1080a655e04f1f6c8
Author: dlktdr <cblackburn320@gmail.com>
Date: Mon Aug 29 01:20:57 2022 -0700
Receiver ID Check
commit f32c0939d44e9ae60bc0705a9176354c23fec198
Author: dlktdr <cblackburn320@gmail.com>
Date: Sun Aug 28 23:13:25 2022 -0700
Portrait Layout
commit 961181217c7841ff3f21299ac6aa419b810f80e9
Author: dlktdr <cblackburn320@gmail.com>
Date: Sat Dec 11 16:56:13 2021 -0800
Model Labels Selector
commit dc99dd40d2
Author: David PHAM-VAN <1387855+DavBfr@users.noreply.github.com>
Date: Fri Aug 26 03:04:34 2022 -0300
feat: Allow Lua widget to override built-in widget with same name (#2208)
* Allow CPP Widgets Override with LUA
* Reset a widget option it the type differs
commit 4b747caff9
Author: eshifri <46511024+eshifri@users.noreply.github.com>
Date: Thu Aug 25 19:47:53 2022 -0700
fix: Write model name into models.yml when duplicating model (#2224)
* Update model name in the models.yml file (#2214)
* Fix the length of the name.
commit e97f23a305
Author: eshifri <46511024+eshifri@users.noreply.github.com>
Date: Wed Aug 24 21:19:52 2022 -0700
fix(cpn): Fix full path to model notes for Simulator (#2223)
* Correct Highlighted Column
* labels .yml indentation
* Update da.h
New defines translated to Danish
* Update dataconstants.h
Omit warnings due to difference of LEN_MODEL_FILENAME and LEN_MODEL_NAME in modellist.cpp
* Update modelslist.cpp
Wonder if this are the right file in PR #1374 (?), seems a lot are changed to the better in #1374
* Update dataconstants.h
Restore #define for LEN_MODEL_FILENAME to 16
* Rebase, Correct Issues
Delete now deletes instead of select
New model stores correct information
Duplicate save all information in cell
Rework items to use cell over button
Reword function variables
* CMPN: Add context menu
Fix output not functional. Removed Yaml::null at some point :)
Fix some compiler warnings
* CMPN: Compiler warning, replace ,->_ in list
* FW: Various Changes
Change view to a grid
Don't allow comma in label name
Add scroll indicators
Save sort order
Co-authored-by: HThuren <99370924+HThuren@users.noreply.github.com>
* reduce risk of corrupt radio.yml #1412
Adds CRC16 checksum to radio.yml when saved.
Adds save to temporary file, folowed by rename to radio.yml
Adds check on load, with fall-back to temporary file
* Made sure that only the first read block of radio.yml is checked for the 'checksum' value.
Added checksum generation on radio.yml produced by conversion.
* Added namespace.
Github actions triggered build failed on this - compiler difference.
* Fixed typo in code not run locally.
* Made checksum result code a enum class.
Fixed null-poionter dereference bug.
* Added check and handling for radio.yml file not read (will be handled as if checksum failed)
Added evaluation of checksum when radio_new.yml is read.
Added f_unlink() calls before f_rename() to ensure the target filename does not exist.
* Added radio.yml cheksum handling to Simulator/Companion.
Cleaned radio firmware handling of checksum field up to be newline agnostic.
* Added handling of files without checksum.
- Letting files pass the check if no checksum field is present (old files) and the size is realistic (25 bytes)
* Fixed bug causing new conversion from binary if no radio.yml BUT a radio_new.yaml
is present in the filesystem.
Now the conversion is only performed if neither file exsits.
* repair rebase problems
* rerun yaml generator
* fix another rebase problem
* update text in companion to be more meaningful when the radio.yml file has a checksum error
fix wrong error message in trace
* add trigger to check radio config when leavin menu_radio
* fix: add handling for temporary and error yaml radio settings files to simu/simulator/libsimulator
* fix corner cases when comverting non crc-ed files
* chore: Tweak radio data warnings for screen sizes
- Changed the define to be a little shorter
- Added missing define for TW
- Three string lengths to suit 128, 212 and basically colorlcd
Co-authored-by: gagarinlg <malte@langermann.net>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* First build
* Fix X9
* Update api_general.cpp
* Update translations.h
* clean up translations
* fix: B&W option handling, remove magic numbers, cleanup
- Remove references to invertRotary, change to RotEncDir or similar
- Add compatabilty importing to companion, firmware
- Rename Lua API call
- Move magic numbers to enum
- Improve B&W option handling so it doesn't apply changes while in menu
* chore: yaml regen
* fix: Add missing guards for X9D/X9D+
* fix: Wrong enum name in simu
* fix(cpn): Use correct names for UI elements
* fix: Translations
* fix: Allow `rotEncMode` in all yaml due to x9d var
Of the three X9D variants, the X9D+2019 is the only one that
has a rotary encoder as standard. However, as the base config
file is for the X9D, this meant it wasn't reading or writing the
config value. Rather than add a seperate config file for it for
a single variable, simple to just allow it across all targets.
* fix: Companion string, change colorlcd to `Choice`
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* timer direction: ellapsed or left
* Add AUDIO announcement support
* Storage for showElapsed
* Translations
* Fix storage
* BW implementation
* Different BW implementation
* Companion support
* Color LCD implementation and rebase to lvgl
* Fix problems found by raphaelcoeffic
* chore: Regenerate the YAML files properly
* fix: Remove unused `TR_SHOW` remnant
* chore: Formatting and cleanup
* fix: Timer dir choice was shown in wrong place
Wrong newline used in ce23b50
* Fix cpn ui triggers, remove unnecessary code and some formatting
* fix(colorlcd): Hide timer dir opt if zero value
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
Imported from open-flysky/Flysky-OpenTX-Test-Branch
* companion: Don't nuke `stickDeadZone` setting
* Implement data storage properly
* Add missing check for NV14 storage struct sizes
* Formatting
* Use one less byte in the packed data struct
Thanks @raphaelcoeffic :)
* Move setting of stickDeadZone default
* Use a Choice combo rather than NumberEdit
* Good riddance magic number
* Also set default stick zone if setting is missing
* Teach tests about `STICK_DEAD_ZONE`
* Tweak choice width
* Cpn NV14 add stick dead zone to hardware and section labels
* Cpn NV14 align default pot names to radio
Co-authored-by: elecpower <neilh713@tpg.com.au>
* Jump from mixes/outputs to channel monitor
* remove unnecessary headers
* Add Button names to translations
* jump from any model page to channel monitor
* Use TELEM short press instead of long press.
* Support TXs with pure touch interface
* Change to KEY_MODEL, whitespace cleanup, git eol
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* feat: Add option for rotary encoder direction
Based heavily on opentx/opentx#8852 by @3djc
* companion ui elements
* Cleanup
* Hook up UI, reading setting from yaml
* Teach simulator about rotEncDirection
* Simu and radio default scroll direction correction
Otherwise the "default" would be the opposite to how it has always been
* Remove what will be a confict with fix in #1586
* Wasn't using rotEncDirection consistently
* Zorro RE dir is opp to TX16, TX12, TPro, X9D+2019
* Model templates - select and load after Create Model for color radios
* Model templates - save model as template, only for color radios
* Small fix to drawTextLines(...) to handle consecutive spaces
* Change title of button for empty template folder
* I found out why "no trailing slash = important" in path names!
* Reworked file and path name string manipulation
No longer using chdir, as Lua scripts etc. could be messing with the working dir
Use buffers more and std::string less
* Adjusting the size of buffers
I think that I got it right now. Really hard to figure out the right size constants!
Also added storageDirty(EE_MODEL) after reading the template file and renaming the model
* Added storage checks
* Slight simplification - all template buttons are similar
* Added "Blank Model" button
* Wizard Lua script
If there is a Lua script with the same name as the template file in the folder, then it is run after reading the template.
* replaced fix strings with translations
* additional strings
* replaced wrong german string to english in all but german translations
* fixed spelling
* replace magic number for throttle idle with correct define
* settings for custom throttle warning position
* settings fixed not to break byte-aligment of bit-fields
* evaluate custom throttle warning position
* add requested throttle value to warning text
* comment about field alignment in ModelData struct
* Menu for editing custom throttle warning for 128x64 radios
Tested on RM TX12
* Improoved menu display
* move displayed strings to translation
* translation template added for each language
* support for 212x64 B&W radios
* menu for colorlcd
not tested
* corrected translation entry for TW
* corrected handling of padding bits in ModelData structure
* Companion support for custom throttle warning position
* Rebase catchup
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
