Commit Graph
106 Commits
Author SHA1 Message Date
bsongis cb073fa549 Audio system on ersky9x ... another rewrite
Some flash saved on stock
GPS calculations flash saving (around 100bytes, needs to be tested)
2012-07-06 13:09:29 +00:00
bsongis 3cb83df6cd 6 bytes saved in flash (pulled from er9x) 2012-07-05 10:31:26 +00:00
bsongis d08c172860 Don't increase stock flash! 2012-07-02 17:18:38 +00:00
rob@marotori.com 6636bf90c8 Update to enable different sound event for trim centres, and trim end points. 2012-07-02 16:55:06 +00:00
bsongis 85f7a85f98 BOLD = YES / NO option
Because this option costs around 400bytes
2012-07-01 20:42:04 +00:00
romolo.manfredini@gmail.com b541cb5c3a fix companion9x compilation errors 2012-06-30 00:09:40 +00:00
bsongis eb61944c0a Tx Low Battery sound was a simple error 2012-06-29 19:58:51 +00:00
bsongis 0da5214a11 Some TODOs removed 2012-06-29 19:23:42 +00:00
bsongis 6b6c945f59 Bold introduced in many menus
PlayTrack for ersky9x
Volume for ersky9x
Names for Mixes and Expos
2012-06-29 17:17:48 +00:00
bsongis f6a8ff9f2a SD File Manager 2012-06-24 08:17:42 +00:00
bsongis fa667dbc78 SD File Manager 2012-06-23 19:44:53 +00:00
bsongis 777f48121b CooCox on ARM
New option THR_TRACE to save flash and RAM on Stock board
DMA used for SD-Card
CMD16 command added for block length = 512 bytes
2012-06-19 22:49:48 +00:00
bsongis d8f6b5b643 Simu compilation 2012-06-19 09:50:40 +00:00
bsongis 342b643661 mixer_interrupt branch merged to trunk
timers on stock board should be more accurate
2012-06-18 13:38:31 +00:00
bsongis 963b07439b Some cleaning was needed. FatFs now shared between gruvin9x and ersky9x boards. 2012-06-18 10:01:59 +00:00
bsongis c715aa2557 SD card support on ersky9x board
Little animation at Tx start
Backlight support for simu
Mixes slow down / up now go 2 times faster
2012-06-17 21:01:07 +00:00
bsongis 75acac5f4c SD-CARD work on the ersky9x board 2012-06-08 15:25:03 +00:00
bsongis 82fe7c61b1 SOMO-14D work for the gruvin9x board 2012-06-06 10:06:36 +00:00
bsongis 249e6f2e63 Flash saving. SD card work (for gruvin9x / ersky9x boards) 2012-05-29 17:06:40 +00:00
bsongis 181ced12fc Simu compilation error 2012-05-25 14:59:31 +00:00
bsongis 925d661640 New warning screens 2012-05-23 20:15:12 +00:00
bsongis 8a62c195d2 In MODEL SETUP screen the 2nd column is shifted to the right by one char 2012-05-21 18:46:42 +00:00
bsongis 02f135a596 Switches warning rewritten
NODATA alarm removed
2012-05-19 17:16:43 +00:00
bsongis 1272f34ccb Cosmetics 2012-05-17 20:04:08 +00:00
bsongis 22562a2d60 Better averaging of voltage. Uses 1 byte RAM more, 70bytes flash less. 2012-05-17 19:48:08 +00:00
bsongis 45bdef6b3a TrmR / TrmE / TrmT / TrmA sources added to mixers and custom switches
The choice for Trim in mixers will be: OFF / ON / Rud / Ele / Thr / Ail
EEPROM formatted on ARM when invalid EEPROM
No EEPROM format when ARM board USB powered
2012-05-15 21:00:57 +00:00
bsongis ab2c65b9f2 SD card for ARM board (first part) 2012-05-14 17:36:18 +00:00
bsongis 3e4677f0b8 Warnings removed 2012-05-14 06:33:52 +00:00
bsongis 2bb11cd2eb MODELSEL menu now accepts trimming at a normal speed 2012-05-11 17:11:41 +00:00
bsongis 1b2eda66d3 Switch movement detection function added 2012-05-06 17:39:58 +00:00
bsongis 65c6dddf98 Fix for companion9x 2012-05-03 19:45:27 +00:00
bsongis 9c8c447f54 Fix for companion9x 2012-05-03 17:37:02 +00:00
bsongis 6e201bc4b6 Some Haptic corrections 2012-05-03 17:19:06 +00:00
bsongis 6afc680d93 Split Haptic from Audio
Vario from Max added
Tests needed on all boards!
2012-05-03 09:19:20 +00:00
bsongis 0aa0f96346 r632 continued. Still needs tests. 2012-04-27 08:12:56 +00:00
bsongis 30be30212c Merge of ARM branch 2012-04-26 14:43:52 +00:00
bsongis 29700853fd Compilation issue on companion9x 2012-04-20 18:24:55 +00:00
bsongis d3f6d6ea4d Compilation issue on companion9x 2012-04-20 18:22:34 +00:00
bsongis 9bc18d1888 400bytes flash saved in GeneralMenus + ModelMenus
On V4.1 board both Rotary Encoder may be used for navigation
TX/RX RSSI set to 0 when no telemetry received since too long
2012-04-20 17:03:16 +00:00
bsongis 9deddaaecd Small corrections 2012-04-20 06:16:22 +00:00
bsongis 1d2de3d3e0 Massive revert of the trunk to return to the last known stable version. I would like a new release soon. 2012-04-18 08:24:33 +00:00
bsongis c3ddf66058 Small flash saving in General Menus (60bytes)
Backlight brightness now supported on ARM
SD card archive function continued
Simu backlight support for v4
2012-04-18 06:00:03 +00:00
bsongis fe9afeb6a2 Haptic function by Rob should now be finished. SD card Model archive function. 2012-04-16 17:35:54 +00:00
bsongis 4d07444bc4 New Makefile option to display the limits in us 2012-04-16 09:32:18 +00:00
bsongis abd4de973b Makefile option renamed (EXTRA_ROTARY_ENCODERS)
Fixed a bug with option EXTRA_ROTARY_ENCODERS: mixes shifted after REb
30 models when open9x / gruvin9x board
LIMITS min and max range fixed
2012-04-15 22:34:39 +00:00
bsongis d5b386d5db New compile option FLIGHT_PHASES added. Enabled by default of course. 2012-04-14 18:30:18 +00:00
bsongis 6bc2ddc3d4 Issue 19 solved
Revert the last Haptic changes (was unfinished, no more spare time during the week-end, sorry!)
Revert my last modification on main views (offset not displayed in Bar Graphs, I was wrong)
PPM Center now configurable for each servo
No mean on the Batt voltage when in the calibration menu to have a faster response when calibrating
SD card Backup / Restore Models feature started
Some french translations fixed
2012-04-14 11:32:40 +00:00
rob@marotori.com f7b1754257 Major patch to split haptic and audio queues into separate systems.
Patch is testing and working on the sky9xboard and the stock board.  I dont have a gruvin board to test on.

Currently only events that trigger haptic alerts are WARNING1-3 and TRIM MIDDLE.  

Next step is for bertrand to use the hooks to enable a per alert option to choose enable haptic.

Also... translations are added but the menu file does not use the translation yet - as I have not got my head round how this works!
2012-04-13 12:22:04 +00:00
bsongis b87f321cae Offsets should not be taken into account in Bars / Values in the Main Views (idea from Cam, thanks!) 2012-04-12 06:50:01 +00:00
bsongis 80d36a783f Slave mode was always enable (ersky9x board) 2012-04-10 22:45:55 +00:00