* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* fixes https://github.com/EdgeTX/edgetx/issues/2965
Changes:
- the log period range is now 0.1s to 25.5s
- upon creation of a new SD Logs SF the period is initialized to 1.0s
- text "Value" is changed to "Period" to indicate parameter represents the log period
ToDo:
- translations for "Period" if desired
rebase due to #2992
* changed Period to Interval
Added translations for DA, DE, EN, IT, PL
* added defaults for TR_INTERVAL to language files
* fixed problem with too many leading zeros for intervals less than 1s.
before: 00.5s
after: 0.5s
* added CZ translations for TR_PERIOD and TR_INTERVAL
changed EN TR_FUNC from "Func" to "Function"
* updated TR_FUNC for CZ, DA, IT, JP, PL
updated TR_PERIOD and TR_INTERVAL for JP
* added TR_PERIOD, TR_INTERVAL, TR_FUNC for SE
* implemented TR_SF_SWITCH and logic to change between TR_SWITCH and TR_SF_SWITCH
* 212x64 radios: single source for #define TR_LSW_HEADERS in language files
deleted redundant defines
* changed 128x64 and 212x64 SF SD Logs to same logic as colorlcd with
- minimum log interval 0.1s
- maximum log interval 25.5s
- default log interval 1.0s
TX12_Sim and X9D_Sim tested ok
* migrated functional changes due to PR #2992
* missed updating TW language file
* fix: Always `STR_SF_SWITCH` regardless of SF
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* first commit for FrSky 8s Lipo Sensor
FLVS Advanced transfers up to 8 cell voltages for Cels sensor
* correcting mistake made transferring local change to PR
* complementary extension of Companion telemetry simulator to enable simulation of 8 cells
* change to allow selection of cells 7 and 8 in calculated sensor with formula Cell
* (cpn) Add bin and yml conversions and basic semantic version helper
Co-authored-by: elecpower <neilh713@tpg.com.au>
* chore: Remove "OFF" from protocol lists
* Fix subType setting for X9D+2019
* fix: Chan start and count for ISRM, dup type set
Channel start and count wasn't being updated for ISRM.
Also remove duplicate modulke type setting, which was the
cause of an earlier bug that was worked around on 128x64
* fix(colorlcd): Shorter ACCST opts string crash
* chore: Formatting only
Co-authored-by: Raphael Coeffic <raphael.coeffic@frafos.com>
* First build
* Fix X9
* Update api_general.cpp
* Update translations.h
* clean up translations
* fix: B&W option handling, remove magic numbers, cleanup
- Remove references to invertRotary, change to RotEncDir or similar
- Add compatabilty importing to companion, firmware
- Rename Lua API call
- Move magic numbers to enum
- Improve B&W option handling so it doesn't apply changes while in menu
* chore: yaml regen
* fix: Add missing guards for X9D/X9D+
* fix: Wrong enum name in simu
* fix(cpn): Use correct names for UI elements
* fix: Translations
* fix: Allow `rotEncMode` in all yaml due to x9d var
Of the three X9D variants, the X9D+2019 is the only one that
has a rotary encoder as standard. However, as the base config
file is for the X9D, this meant it wasn't reading or writing the
config value. Rather than add a seperate config file for it for
a single variable, simple to just allow it across all targets.
* fix: Companion string, change colorlcd to `Choice`
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* timer direction: ellapsed or left
* Add AUDIO announcement support
* Storage for showElapsed
* Translations
* Fix storage
* BW implementation
* Different BW implementation
* Companion support
* Color LCD implementation and rebase to lvgl
* Fix problems found by raphaelcoeffic
* chore: Regenerate the YAML files properly
* fix: Remove unused `TR_SHOW` remnant
* chore: Formatting and cleanup
* fix: Timer dir choice was shown in wrong place
Wrong newline used in ce23b50
* Fix cpn ui triggers, remove unnecessary code and some formatting
* fix(colorlcd): Hide timer dir opt if zero value
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
- fix Companion yaml model read and write
- B&W radios treat bit values the same as color to avoid unnecessary complication for Companion and radio conversions
- B&W radios default is therefore off for all pots and sliders
- B&W radios fix runtime warnings check
- all radios fix to save last pot or slider position when checked and mode AUTO on change of model or power off
- all radios do not display Pots Warning in model setup if no pots or sliders supported
* fix: Prevent potential wordsplitting of variables
* chore: Remove need for separate cpn 32bit script
* Build script tag/branch/PR auto-detection
* Teach companion about VERSION_TAG
* Update some constant names
* Only one companion build script
* Actually use `VERSION_SUFFIX` in about screen 🤦
* Add space
* Remove line that was only for testing 32bit build
* Remove hyphen between win and bits
* Show codename in Settings -> Version
* cpn: Only show codename on tagged versions
* Update about screen also
* Double quotes around codename on colorlcd
* Update copyright year
* About screen should use VERSION_TAG when set
* feat: Add option for rotary encoder direction
Based heavily on opentx/opentx#8852 by @3djc
* companion ui elements
* Cleanup
* Hook up UI, reading setting from yaml
* Teach simulator about rotEncDirection
* Simu and radio default scroll direction correction
Otherwise the "default" would be the opposite to how it has always been
* Remove what will be a confict with fix in #1586
* Wasn't using rotEncDirection consistently
* Zorro RE dir is opp to TX16, TX12, TPro, X9D+2019
* replace magic number for throttle idle with correct define
* settings for custom throttle warning position
* settings fixed not to break byte-aligment of bit-fields
* evaluate custom throttle warning position
* add requested throttle value to warning text
* comment about field alignment in ModelData struct
* Menu for editing custom throttle warning for 128x64 radios
Tested on RM TX12
* Improoved menu display
* move displayed strings to translation
* translation template added for each language
* support for 212x64 B&W radios
* menu for colorlcd
not tested
* corrected translation entry for TW
* corrected handling of padding bits in ModelData structure
* Companion support for custom throttle warning position
* Rebase catchup
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
