* Implement model note view without menu handler. Use it before pulse starts
* Also at model change. Handle wd reset and start pulses after mixer
* Fix Horus compile
* Fix Horus crash
* Fix coding style issue
* add receiver number check for Horus
* find the first free model ID on LONG ENTER
* use the next free model ID for new models
* improve free model ID support for std LCD as well
* fixed “duplicate model”
* fixed ModelsList::isModelIdUnique()
* added setCustomFailsafe()
* failsafe setup: set all custom channels with ENTER long press
implements #5820
* added “outputs -> failsafe” menu item on horus
* change “Trims >> Subtrims” to “Trims => Subtrims”
* use translated string for “Outputs => Failsafe”
* fixed entered TR_TRIMS2OFFSETS and TR_OUTPUTS2FAILSAFE
When using ZCHARs in Horus texts, there are some artefacts when highlighted.
* added “outputs -> failsafe” menu item on taranis 212x64 LCD
* added “outputs -> failsafe” menu item on taranis 128x64 LCD
* fixed indentation
* Save 128 byte by moving variable to stack
* Make usb mass storage buffer smaller on F2 processors and put into reuseablebuffer
- Lower USB mass storage buffer to 512 bytes per default on F2
targets, makes usb speed slightly slower ~600 kB/s instead ~700 KB/s
in my tests, saving 3584 bytes
- Save another ~300 bytes by putting that buffer into reusableBuffer
* Don't put id into reusuableBuffer
All uses of id can be on the stack as well. Makes no difference for ram usage but makes it safer to reuse reusableBuffer
* Only link cdc serial when needed
We always linked usb cdc even in non debug builds. CDC uses about ~600 byte of RAM for its buffers and structures.
* [firmware][ARM] Adjust some value limits for mix sources and update editing UI for LSs, CFs, & telem. bars:
* Increase timer limits to +/-8:59:59 when used with LSs, CFs, & bars;
* Increase Lua script output limits to +/-30K;
* Trim limits based on extended limit model setting;
* Limit TX voltage to 25.5;
* Limit TX time comparison value to 29:59m;
* Use proper GVar limits (user-configured), display precision, & unit in LSs & telem. bars;
* Display timer values properly with hours (instead of mmm:ss).
* [firmware] getTimerString() would fail with times >= 100min if hours weren't shown.
* Fix builds w/out GVars.
* Switch backlight on when displaying a warning.
This is especially visible on the power off RSSI warning. This will also show the other warnings at start with backlight, even when blocklight is set to always off. But my X9D+ will switch its backlight on after boot once even with backlight on, so backlight=off is not so off as it seems.
* Rework power rssi code a bit
- Cleanup shutdown_confirm code
- allow x9d+ to be compiled as power button too to be able to test these things on the x9d+
- Fix shutoff after 10s in warning dialog on x9d
- Make warning dialog always turn on backlight
* Revert CMakeLists.txt
* [212x64] Main view toggle LS groups 1-32 and 33-64 with +/-/encoder. Closes#5476
* [212x64] Also allow encoder events in channels view for switching channels range (fix for X9E).
* Pad LS range numerals to 2 digits.
* POC for X9, requires -DBINDING_OPTIONS=YES
* There are apparently 4 valid choices
* - make BINDING_OPTIONS part of standard code
- adapt R9M EU LBT dialog to choice on bind
* - remove option from Companion
- cosmetics
* Compilation fixes
* implementing syncing with multi
* Send config command
* Implement setting failsafe for multimodule
* Fix
* Fix last bugs. Multi sync now working as expected.
* Add eww multi protocol
* Show telemetry errors in Debug statistics
This introduces a second debug page on X7 and X9 platform since the original page is almost full.
Also fix the X7 menu navigation to be able to go back and forth
* Fix compile error on platforms without key_page
* avr-gcc bails on missing eolf
* Fix navigation
* Just keep pushing ....
* compile fixes of 9x and use chainMenu
* Fixes
* Align x9 behavior to x7 (for once !)
* Allow total timer reset on both long menu and long enter
* Improve 9x handling
Bertrand Songis