Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* chore(lua): revert useless c light function change
This change was part of the eLua LTR patches (based on 5.1), whereby this feature was already integrated in Lua 5.2.
* feat(lua): port of NodeMCU Lua53 read-only tables
# Conflicts:
# radio/src/lua/CMakeLists.txt
# radio/src/lua/api_general.cpp
* fix(nv14): missing SDRAM definition
* fix: l_mathop
* fix: use float functions in drawPower()
* fix: ltable resize
* fix: correct name is "bit32"
* fix: first Lua context must be closed last
As the lookup cache is attached to that one
* Revert to Lua using double
* Ensure byte-code compatibility
* Fix possible compatibility issue with `lua_typename`/`luaL_typename`
* Fix Bitmap symbol table
* Re-add table lib for COLORLCD
Added support for:
- T16 radio
- internal multi-protocol module.
- flashing internal and external multi-protocol modules.
Many thx to:
- goebish, for the hardware support.
- qba667, for the original patches for the internal multi-protocol support (UI and serial com).
* [build][CMake] Use `find_package(Git)` to confirm existence before trying to use git for version stamp; Use friendlier detection of grep executable on Windows; Use "del" on Windows instead of "rm".
* [build][Windows] Include dirent and msinttypes headers in source tree.
* Remove grep dependency for lua exports generation
* Sneaky pythons hiding in code.
* [build] Change `git_id` macro to skip check if no git directory is present, also now fails gracefully; Fix `today` macro on Windows; Report git revision; Make sure QtSvg module is found.
* [Windows][MinGW] Update some WIN32 macro checks in source code to be MSVC-specific (not needed for GCC-based builds).
* [build] CMakeLists updates:
Adjust for Windows MinGW builds: now fully compatible with Qt5.5+ and MinGW-w64 toolchain (included in Qt installs);
Add option to specify path to required libraries/includes (instead of hard-coding `c:\programs`);
Add package check for Python and use found executable name;
Remove custom FindSdl package handler in favor of stock (and improved) CMake one (still works with Windows);
Do not force SIMU_AUDIO and LUA_COMPILER in SIMU builds (leave it up to user);
Add SIMU_LUA_COMPILER option specifically for SIMU builds (default = ON);
* [build][Windows] Rewrite/Fix Windows Companion `install` target, with two options:
a) just copy supporting Qt and c++ DLLs to build folder so programs can be quickly be run from there (this is default and similar to the old behavior);
b) full installation to CMAKE_INSTALL_PREFIX path, including all binaries, supporting DLLs, language files, and OTx utilities.
Option b) can be selected with new WIN_DO_FULL_INSTALL parameter;
Also cleans up the Linux install a bit and consolidates the OS X parts;
* [simulator][Windows] Add option to build Windows simulator with system console/terminal enabled (both standalone and when launched from Companion). Mostly useful for debug as it gives output messages much sooner in the startup process than the current debug console. Also helpful because you don't have to open it manually on every launch, and it remembers last window position and size. Possible candidate for a user-selectable runtime option in the future.
* [Windows] Fix MSVC build issues.
* [build] More build fixes:
Use a customized FindSDL.cmake script again due to bugs and deficiencies in the official version (based on script from CMake v3.7);
Fixes missing SDL DLL error in NSIS installer);
Use string for Timers option (checkbox in GUI is confusing);
Remove an unused variable.
* [simu][Windows] Fix f_getcwd() cutting off too many characters (fixes SD browser interactions).
