Commit Graph
1463 Commits
Author SHA1 Message Date
Peter FeerickandGitHub c4e221fb5a fix(b&w): Bootloader "USB Connected" alignment (#3716)
* fix: Bootloader "USB Connected" alignment
Fixup from #2946

* fix: Different for colorlcd and b&w

* fix: Lets do this properly
Thanks @3djc for the hint to go to bed 😆

* fix: trim `edgetx-` in smaller b&w screens
2023-06-26 19:05:58 +10:00
3djcandMalte Langermann a2d845d6b1 Fix DEBUG compile 2023-06-25 14:32:39 +02:00
Raphael CoefficandMalte Langermann 2b100e0eb5 refact: ADC, switches and keys
Add "hardware_defs" target to dump hardware defines from hal.h per target

Fixed hal.h definitions for switches & ADC inputs

Tools to generate hardware definitions from current hal.h

generator: add support for EXTx and analog switches

WiP

Add generated header to hardware_defs target

Add support for ADC input direction and index per GPIO port

Incredible: it compiles

Removed StdPeriph ADC driver

Works on QX7

Works on TX16S (VBat missing)

Switch driver using generated switches for stm32 targets

Switch driver with generated switches for simu

Use switch names from switch driver

Fixed single conversion handling

Fixed horus VBat reading

Added switch name

Fix warnings about bitfield offsets and GCC 4.4

This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.

Switches has already been moved to generic driver

Jitter measurement for each sample, not just for oversampled values

Moved periph clock init to the ADC driver

ADC & GPIOs.

Add switchInit() to init pins

Fix NV14 CMake

Fix taranis target

Fix NV14 (again)

Model audio files: use new interface for switch index

Fix X9-lite

Fix simu headers

Fix getSwitchName()

Add support for ADC switches

Fix switch warning YAML

Test only switches which are defined

Conversions tests for QX7 only on QX7

Fix X12S

Fix function switch names

Enable ADC periph clock before initialising channels

NV14: offset inputs for the sticks & fix switches

WiP: get rid of VSRCRAW and some more

Simu shall use normal ADC driver

fix x7

fix nv14

Fix 9x nav

fix 212x64

fix xlite

fix x9e

fix simu lib

fix unit tests

fix x7 tests

PWM stick values should be written directly into adcValues

... just like FlySky sticks.

fix x12s

fix nv14

Add some support for SPI ADC (only unit tests)

Remove `jq` usage

fix generate_yaml.py for newer libclang

fix pot config

fix stick names

Some YAML generator improvements

Max 16 Pots on COLORLCD

Fix some source names

Use 10 bits for switches to prevent overflow

Removed horus constants for switches & ADC inputs

Fix unit tests

Fix curve edit

Fix libsimulator

Fix function switches (tpro)

Refine ADC & analog API

Moved hardware definitions scripts and templates into own dir

cleanup API refine

Fix unit tests

Mixer: apply calibration only on required inputs

Place ADC switches after all other ADC inputs

Fix X12S

Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW

Cleanup redundant generated YAML parsers

Fixes Boxer rebase

Add boxer to generate-hw-defs.sh

Obsolete LUA exports

Add boxer ADC_DIRECTION

Split generate_hw_defs.py into multiple files

Some cleanup (+ LUA switches)

Fix AXIS definitions

Fixed translation strings declarations

Some rebase fixes

Remove some useless StdPeriph drivers

fix: set pin mode to reset state on usart deinit

fix: use canonical names for calibration data

fix: ADC driver does not care about unconfigured inputs

fix X12S ADC

Add support for ADC conversion chaining

Better X12S ADC implem

Moved X12S ADC driver to HAL/LL

Improve ADC driver separation

Fixed taranis & nv14

Moved PWM gimbals to HAL/LL

Removed useless TR_EXTRA_VSRCRAW

Fixed include guards

Small fixes

Renamed control inputs

Moved internal and external module pulse driver def to boards

Move more things to the generic_stm32 board

Remove STR_VMIXTRIMS

Added analog labels

Generate main control names

Misuse labels / short labels for main controls

Backward compatibility: sliders and legacy names

New keys driver

Let's get rid of StdPeriph headers in simu

Add jinja2 to CI workflows

Use `grep` instead of `sed`

chore: add python jinja2 oto msys setup script

Removed more static definitions and use dynamic ones instead

Fixes X9E

Fix x7 nav too

212 switch display

Fix default sliders

Removed NUM_STICKS

212 switch display working nicely

Surface radio 'stick' replacements

fix: switch, trim & rotary pin init

Remove old key drivers

Removed VKEYS

Removed ETX_FOURCC

Fixed SURFACE_NAME

Removed TR_VSWITCHES & TR_TRIMS_SWITCHES

Fix xpot switches

Store calibrated analogs in physical order

Use getSourceString in drawSource

Implement missing YAML read/write

Fix isSourceAvailableInInputs()

Fix isSourceAvailable()

Some surface fixes

Fix CLI debug

Ported colour UI of analog diagnostics to new ADC API

Small fixes

Better input mapping

Minor tpro fixes

Fix trims available

Remove TX mode choice on surface radio

Rename surface controls

Channel order alignement

Fix throttle warning

Fix checkTrims()

Fix pot config casting issue

Fix IS_SWITCH_FS()

Fixed input mapping

Fix fswitch auto-switch

Fixed storing / reading function switches in YAML

Fix enableVBatBridge() / disableVBatBridge()

Fix interesting mode conversion

Fix sources issues

Fix special funnction list

Proper function switch handling

128 GUI improvements

Fix compilation

Boxer cosmetics

128 hardware screen cosmetic

Fix TX12 switches

More switches fixes

Simplify CPU type handling

Fix flash size

Fixed page-up / page-down in libopenui
2023-06-25 14:32:39 +02:00
cb533f4493 fix(AFHDS3): Sync UI with Flysky AFHDS3 module stored settings (#3501)
* Refresh UI module settings when AHFDS3 config is updated.

* Fix scroll order for module options when 'FlySky' module type selected.
Fix simulator crash issues related to FlySky module.

* Fixed UI refresh problems in UI widget ordering fix.

* Refresh config when receiver is connected.

* Disable change of bind time options when receiver is connected.

* Rename methods to better distinguish between buffer fill or actual send.

* Clean and tidy up AFHDS3 state flow.

* Implemented settings sync upon setting changes.

* Added RF power settings for IRM301/FRM303.

* Added RF power sensors for FRM303.

* Fixed config not saved and only FRM303 supports RF power settings.

* Fixed RF power command error.

* Fixed a crash for IRM301.

* Always check if port exists and return nullptr for driver.

* fix: Make Companion preserve settings *as is*

---------

Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2023-06-19 19:00:02 +08:00
ulfhedlundandGitHub c8059403b9 chore(translation): Theme color constants (#3664)
* translated_theme_text

* translated theme text

* translated theme text

* translated theme text

* translated theme text

Changes to allow direct use of translation strings for all theme text, as per code from @philmoz

* Some minor changes

* Proper translations for CZ,DA,DE,FR,HE,IT,JP,PL

* Translations for CN,TW

* Minor correction
2023-06-17 14:05:16 +10:00
68061346fa chore: Translation catchup (#3619)
* chore: `DE` Enabled features translation

* chore: Qt Linguist updater, skip SE due to #3456

Updating 'companion/src/translations/companion_pt.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 1 translation(s)
    Same-text heuristic provided 5 translation(s)

Updating 'companion/src/translations/companion_zh_TW.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 3 translation(s)
    Same-text heuristic provided 27 translation(s)

Updating 'companion/src/translations/companion_pl.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 3 translation(s)
    Same-text heuristic provided 32 translation(s)

Updating 'companion/src/translations/companion_ru.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 2 translation(s)
    Same-text heuristic provided 42 translation(s)

Updating 'companion/src/translations/companion_de.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 3 translation(s)
    Same-text heuristic provided 36 translation(s)

Updating 'companion/src/translations/companion_nl.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries

Updating 'companion/src/translations/companion_da.ts'...
    Found 2960 source text(s) (36 new and 2924 already existing)
    Removed 13 obsolete entries
    Same-text heuristic provided 21 translation(s)

Updating 'companion/src/translations/companion_sv.ts'...
    Found 2960 source text(s) (46 new and 2914 already existing)
    Removed 18 obsolete entries
    Number heuristic provided 1 translation(s)
    Same-text heuristic provided 24 translation(s)

Updating 'companion/src/translations/companion_cs.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Same-text heuristic provided 21 translation(s)

Updating 'companion/src/translations/companion_fi.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 3 translation(s)
    Same-text heuristic provided 21 translation(s)

Updating 'companion/src/translations/companion_he.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries

Updating 'companion/src/translations/companion_zh_CN.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 3 translation(s)
    Same-text heuristic provided 20 translation(s)

Updating 'companion/src/translations/companion_ja.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 3 translation(s)
    Same-text heuristic provided 25 translation(s)

Updating 'companion/src/translations/companion_es.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Same-text heuristic provided 22 translation(s)

Updating 'companion/src/translations/companion_en.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries

Updating 'companion/src/translations/companion_fr.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Same-text heuristic provided 19 translation(s)

Updating 'companion/src/translations/companion_it.ts'...
    Found 2960 source text(s) (168 new and 2792 already existing)
    Removed 63 obsolete entries
    Number heuristic provided 3 translation(s)
    Same-text heuristic provided 21 translation(s)

* IT and DE updates

* Translation catchup (Swedish) (#3626)

* Translation catchup #3619

* Translation catchup #3619

* Additional translations for #3619

* Minor changes for PR #3619

* fix: Change back to TR_ENABLED_FEATURES

---------

Co-authored-by: Peter Feerick <peter.feerick@gmail.com>

* FR Translations

* CZ Translations

* DE and IT updates

* Update IT

* PL Updates

* PL update

* Hebrew translations (#3638)

* translation-catchup HE

* TR_SHOW_INSTANCE_ID translation from Offer

* CN/TW translations

* Update JP

* Update CN/TW

* Update DA
2023-06-09 10:43:23 +10:00
Peter Feerick 892d2b183b fix: Missing "None" for Polish TR_POTTYPES
Resolves #3633
2023-05-30 19:27:31 +10:00
Frankie ArzuandGitHub be1a20f595 fix (telemetry): DSM Telemetry fixes for ESC sensor, Binary GPS, RX Battery Sensor Capacity meter (#3615)
* #3368 DSM Telemetry Fixes

1. Expand constants for telemetry frame SIDs and optimize flow of processing of sensors (less CPU work)
2. Add Binary GPS
3. Add Dual Battery Sensor monitor
4. Fix bad math on some ESC sensors
5. Fix problem where ESC RPM sensor was changed from "Erpm" to "EscR".. fix it back to "Erpm" for compatibility with 2.8.x

* #3368 DSM Telemetry Fixes

1. Split long if-then-else code into more granular function.
2. fix ESC VBEC (BEC voltage)
3. Improve testing function
2023-05-27 17:55:26 +10:00
philmozandGitHub 5327c890f2 feat: Add options to disable radio and model menu tabs (#3484)
* Add options to disable radio and model menu tabs.
- Update radio and model data structs
- UI for color LCD radios
- Convert existing 'noGlobalFunctions' property.
- Language strings.

* Make 'theme' control specific to color LCD radios.

* Add B&W radio UI.

* Simplify code, reduce compiled code size.
Fix page count display on model select tab.
Fix GVARS for 212x64 radios.

* Collapse timer sections if timer is off.

* Remove 'Use global functions' checkbox from B&W model setup.

* Make preflight checks, throttle and view options sections expand & collapse (default collapsed).

* Fix build.

* Add view options to companion data classes, save and load values in YAML files.
Fix scrolling for radio setup view options.

* Add Companion UI for view option settings.

* Remove 'Mixes' from list of tabs that can be hidden.

* Updated Companion UI from elecpower.

* Use view options flags to enable/disable functionality:
- skip heli mixer logic if heli not enabled
- Remove heli, gvars and telemetry options from source selection if not enabled

* Remove 'flight mode', 'curve' and 'global variable' settings from input & mix editors if option disabled.

* Rename 'View Options' to 'Enabled Features'.
Put GVAR option under Flight Mode and indent text.
Make relationship between FM and GV more obvious.

* Remove global variable option dependency on flight modes.
Hide FM1-FM8 in global variables if flight modes hidden.

* Hide 'Custom Mixer Scripts' in source selection menu popup if disabled.

* Add translation strings for Hebrew language file.

* Fix typo. Add comment for double call to setCurrentTab.
2023-05-22 20:08:16 +10:00
MichaelandGitHub 04359757c4 fix: Update built-in Multi-protocol module protocol lists, single source for firmware and cpn (#3435)
* - Concentrated Multi protocol definitions into a consistent single source. Actually two .h files, one for the protocol list and names, the other for subtypes and capababilites, see comments in .h files as to why

- updated available protocols reflecting 1.3.3.20 (15+ protocols)
- fixed Companion always showing f/s and channel map options in model setup disregarding the protocol capability

* Following @pfeerick's review: changed heaeders and typos

fixed Ubuntu runtime error on assert
fixed change of Multi protocol not triggering writing yaml file

* corrected copy/paste error

* fixed FrSky index juggling

* Updated Multiprotocol database to current MPM project status (ref. MPM Multiprotos.ino)

- changed protocol name FX816 to FX
- added Flysky AFHDS2A options PPM and PPWM SBUS 16ch subtypes "PWM,SB16" and  "PPM,SB16
- added V761 option to select TOPRC
- added FX options "816" and "620"
- added FRSKYR9 option "-- 8ch"

* MPM protocol scan excludes some protocols which are not meant to be selected. For Companion and Simualtor (and for radios if there is no MPM connected) this was handled in different places with outdated information. Harmonized and centralized the handling of non-selectabale protocols into the single source for all companion, Simulator and all gui types.

* More cleanup:

- changed some MPM protocol names to the ones the MPM delivers with MPM protocol scan to harmonize names between CPN/Simulator/radio
- added XN2927DUMP and MOULDKG to the list of excluded MPM protocols just like the MPM does with MPM protocol scan
- added new option value limits and moved definitions to single source
- adapted CPN and radio to use common definitions of option values for all GUI types
- moved distributed MPM (as far as possible) to one coherent place under a single #if defined (MULTIMODULE)
- fixed option value not reset at change of protocol
- some editorial stuff

Note: There is still some work to be done on CPN GUI option values. DSM2 servo rates are hard coded, BAYANG telemetry options are only shown by index and not by text as in radio code, AFHDS2A servo update rate is shown as index too which is to no use for users.

I'll try to fix all this in the next session, but request to get rid of BAYANG telemetry options translations. It is much easier to define a common string list by using untranslated.h

* rebase due to fr.h

* resolve merge conflict with main fr.h

* more cleanup:

- deleted multiple definition of MM_RF_CUSTOM_SELECTED in favor of single source define
- bw radios: change to only allow defined protocols rather than a fixed 127 protocols

* Changes:

- magic sentinel number 0xfe as define
- add 10 NN protocol entries for future use of new MPM protocols not yet defined in ETX (still recommend timely ETX maintenance update if MPM releases new firmware)

* Changes by @elecpower:

- align field labels to radio
- change servo update frequency from combo box to spin box with edit only via up/down arrows to stop invalid values being entered via keyboard. Remove frequency list used to populate combo box as only used by Companion.
- add validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.

* Changes:

- radio: added validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.

* CPN: use sentinel define

* cpn: Sort multi protocols list (courtesy @elecpower)

* fixes #3480

changes:
- moved FrSky subtype defines to MultiProtoDefs.h
- updated bind_button_driver.cpp

* missed replacing one instance of setMultiProtocol()

* changes:

- editorial change
- added multi option to OMP protocol (ref #2713)

* rather go for STR_MULTI_RFTUNE because MPM manual talks about RF tune

* made XN297_DUMP selectable (available with MPM debug fw only)

* corrected merge mistakes
2023-05-22 20:07:29 +10:00
RistoandGitHub f8814a072e feat(ui): rephrased to "Missing or bad radio data" (#3589)
* feat(ui): rephrased to "Missing or bad radio data"
Less daunting label if \RADIO folder on SD card is non-existent.
Thx to jan-kozak-oc, robustini, ToshihiroMakuuchi, Pat6874, HThuren, Eldenroot, ulfhedlund and zyren for translations.
2023-05-17 13:20:41 +02:00
MichaelandGitHub fd7d359695 fix: RX stat labelling dependent on telemetry protocol (#3523)
* RX stat (formerly known as "RSSI") labeling dependent on protocol (RSSI/dbm, Rqly/%, Sgnl/-)  used for range check, multi rf tuning and low/critical warning settings pages

* chore: Bump libopenui

* removed define that was supposed to be for testing only

function getRxStatLabels(): wasting flash as inline, no need to be inlined

* removed inline on getRxStatLabels() - step 2
2023-05-17 11:17:35 +10:00
MichaelandGitHub 5db37e2a2b feat: Support for ext. Multiplex MLink JR type module (#3352)
* introducing external MLink module telemetry as module PPM subtype

* implemented fix for sensor discovery display not showing all detected sensors (is in separate PR too)

implemented PPM subtypes in Companion

* add PPM subtype to model printer

finalize subtypes for PPM in Companion

* added logic to try to use HW UART with inverters turned off first (e.g. NV14), then, if not successfull use soft serial inverted (== uninverted data due to HW inverters on PCB)

changed start bit detection IRQ priority from 5 to the previous 0 (also in separate PR)

* extended telemetry timeout to 2s due to slow Mlink RSSI update rate

* changed the "NOTLM" sub-type texts to:

- "No Telem" for 128x64 (this is the max numbers of characters it can take)
- "No Telemetry" everything else including Companion

* Companion:

- lower case 1st charachter on PpmSubTypeStrings to ppmSubTypeStrings
- added telemetry hooks for ppmSubTypeStrings stringx

* simplified serial port initialization for MLink telemetry

* editorial change: corrected obsolete comment
2023-05-16 11:22:47 +10:00
ulfhedlundandGitHub e603581105 chore: Translation of "Range Test" (#3584)
* Translation for range test

* Translation for range test

* Translation for range test

* Reviewed translations for 9 languages

Reviewed translations for 9 of 11 actively translated languages

* Translations for Chinese and Taiwanese
2023-05-14 16:28:27 +10:00
Stav RavivandGitHub dd64aaef2e feat: Hebrew radio translation 🇮🇱 (#3506)
* Hebrew radio translation 🇮🇱

* chore: loop in alphabetical order

* Replace Arial with Arimo

* Add "he" to companion settings
2023-05-14 13:36:53 +10:00
HThurenandGitHub bd14c83b6a chore(translation): Danish updates 🇩🇰 (#3581)
* Comp + radio - DA update

* change da to da_DA
2023-05-13 17:58:56 +10:00
Offer ShmuelyandGitHub e9750a6f91 feat: Support selection of Hebrew audio pack (#3511)
* support hebrew audio selection

* support hebrew audio selection

* support hebrew audio selection

* support hebrew audio selection

* support hebrew audio selection
2023-05-11 10:40:53 +10:00
0ef4199632 chore: Review IT translations 🇮🇹 (#3505)
* Review IT
Signed-off-by: Pancronos <pancronos@gmail.com>

* chore: Fix most of space/tab indentation

* chore: Update attributions

---------

Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2023-05-11 10:34:15 +10:00
PatrickandGitHub 449d20997e chore: Update French translations 🇫🇷 (#3461)
* Update fr.h

continuation of the translation...
It's not over yet!

* chore: More updates

* Update fr.h

* Update fr.h

* chore: Minor corrections
2023-05-11 10:33:21 +10:00
philmozandGitHub 5da43df4e4 fix: Debug key names for Boxer (#3536) 2023-05-05 19:49:53 +10:00
3djcandGitHub f5c1a93f87 fix: Formatting the SD card on radio when running is a bad idea (#3549)
Plus we need the flash memory space for some targets!
2023-05-02 09:30:27 +10:00
philmozandGitHub 62a40f1c47 fix: Announce timer value as hours and minutes when played from SF (#3293) 2023-04-19 21:59:08 +10:00
philmozandGitHub 6985d3f24b feat(color,cpn): Updates to the model telemetry page, sensor ID consistency (#3401)
* Add 'Show Instance ID' button to telemetry page to show/hide sensor instance number (default is hidden).
Fix issues with page refresh when all sensors deleted.
Select closest sensor when a single sensor is deleted.
On change, only refresh the sensor list instead of the whole page.
The 'showInstanceIds' property is saved to the model file.
Update Companion to save/load 'showInstanceIds' in model YAML file. Add checkbox to telemetry edit page.

* Update all radio specific files.

* Keep focus on 'Discover/Stop' button when searching for new sensors.
Start sensor ID index at 1 to match B&W radios.
Keep focus on changed parameter when editing sensor, don't rebuild entire parameter list on change.

* Display actual 'instance' ID instead of 'instance' + 1.

* Fix incorrect ID when reloading simulator data.

* Fix incorrect ID when reloading simulator data on B&W radios.
2023-04-17 18:44:44 +10:00
Marco RobustiniandGitHub 7bf6dbba0f chore(translation): Update Italian translations(#3485)
Joystick and servos section translation
2023-04-17 18:19:34 +10:00
Peter Feerick ddf6222d6b chore(afhds3): UI cosmetics and formatting
Post #3443 cleanup
2023-04-13 20:40:58 +10:00
Xy2019andGitHub 02e804f55c fix(afhds3): Unable to set SBUS, IBUS display issue, indiv channel PWM freq (#3443)
* Fix the BUG of V0 receiver setting IBUS SBUS; add the setting item of INRM301.

* Fix check failure; remove some unused characters.

* Fix typos and rename variables as well as fix compilation errors.

* add language
2023-04-13 19:36:43 +10:00
PatrickandGitHub 745c465bed chore(translation): Updates to French translations 🇫🇷 (#3447) 2023-04-10 12:58:13 +10:00
HThurenandGitHub 07af9306e9 fix(translation): Typo in Danish translation (#3420) 2023-04-01 11:25:27 +10:00
1f82724a95 feat(color): Better debug names on statistics page (#3245)
* better_debug_name_on_statistics_page

* chore: Translations for Lua related strings

* chore: More translation strings for stats screen

* chore: Padding for STR_MS, STR_BYTES

---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2023-03-30 12:12:45 +10:00
HThurenandGitHub 97d812a7df chore(translation): DA radio and companion updates (#3416)
* Compaion changes

* minor DA changes for radio

* minor DA changes for radio

* minor DA changes for companion

* minor DA changes for radio
2023-03-30 11:44:53 +10:00
ulfhedlundandGitHub 1aa28a6295 chore: Swedish Companion and radio translation updates (#3397) 2023-03-24 11:08:57 +10:00
Peter FeerickandGitHub 335c0a3a0a chore(colorlcd): Page header unification and other cosmetics (#3326)
* chore: Change Radio setup page headers

* chore: Model Setup page header changes

* Main menu, Model Manager, Model Templates
Including needed translation strings

* Model telemetry sensor edit page
Taking into account sensor value shown in header

* chore: Change "Edit Labels"
Resolves #3014

* fix(b&w): "Rx channel ord" -> "Def chan order"
Resolves #3348

* chore: Update translations

* chore: Change to prefered "Manage Models"

* chore: Cleanup

* chore: Move some colorlcd-only strings
May or may not save some flash memory

* fix: Missed a translation string rename
2023-03-23 11:53:27 +10:00
661657feca feat: New advanced joystick mode on radio, improvements to Companion and Simulator joystick support (#3111)
* Allow switches on the connected radio to control switches in the simulator via the joystick interface.

* Merge configurable radio joystick interface from banyaszg.

* Add two more 'axis' channels to companion.

* Fix 6POS from USB joystick to simulator.

* Reduce data size.

* Fix build error on B&W radios.

* Add 'Companion' button mode to work with the button logic in the Companion app.

* Build Companion joystick setup layout at runtime.
Change #define names for simulator joystick.
Allow 15 axes and 32 buttons.
Initial support for trim sliders.

* Remove custom joystick button type for companion - use 3 buttons per switch in companion to control simulator switch state.

* Fix joystick constructor calls parameters. Connect some radio joystick trims to simulator widgets.

* Restore 'companion' button type to reduce number of buttons needed. Make trims work via buttons in USB joystick.

* Connect joystick trim buttons to simulator widgets.

* Use companion source names for trims.

* Add encode / decode of usb joystick custom settings to Companion.

* Convert to lvgl layouts.
Update language files.

* Fix generated YAML storage files.

* Fix initialisation error when editing button channel. Cleanup code.

* Fix rebase.

* Fix refresh of joystick channel list view after editing an entry.
Companion joystick config window uses two columns.

* Fix vertical joystick inversion bug.
Change stick axis labels.

---------

Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
2023-03-22 10:31:29 +10:00
RistoandGitHub 150f341a23 fix(color): Main view numbering (#3357)
* fix(ui): Main view numbering #3073

* Fix max last tab focus.
2023-03-17 10:27:47 +10:00
816a823727 feat: Add support for Japanese voice language 🇯🇵 (#3261)
* Created tts_jp.cpp and added "TR_VOICE_JAPANESE" to the *.h file.

* Commented out once because the build did not work

* fix: Define `JP` as a TTS language,
- Fixes the undefined reference to `jpLanguagePack` error
- put things in alphabetical order as the comment suggests it should be

* chore: Add `JP` to Companion voice language list

---------

Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
2023-03-16 21:33:58 +10:00
3djcandGitHub e3d8158d50 fix(b&w): Trainer mode strings for BW screens (#3354)
* Fix trainer mode translations for BW screens

* fix: Errant comma
2023-03-14 20:35:56 +10:00
philmozandGitHub 805b848ea6 fix(color): Adjust page padding for several setup pages, backlight page tweaks (#3291)
* Add padding to 'Trims' and 'Throttle' setup pages.

* Add padding to pre-flight checks page.
Make button size consistent.
Fit more buttons per row,
Display proper pot and slider names for center beeps.

* Add padding to radio setup pages (Sound, Vario, Haptic, Alarm, Backlight and GPS).
Move backlight inactivity timer to its own line and add a label (requires translation).

* Update translation.

* Hide Backlight controls that are not relevant to the backlight mode selected.

* Update translation.

* Update translation.

* Update translation.

* Update translation.

* Update translation.
2023-03-13 11:11:33 +10:00
ulfhedlundandGitHub a416548ecc chore: Translated curve types (#3319)
* Added translation of curve types

Added translation string STR_VCURVETYPE

* Added STR_VCURVETYPE

* Added translation of curve types

* Added translation of curve types

* Added translation of curve type

Added 
#define TR_VCURVETYPE  "Diff","Expo","Func","Cstm" 
for translations of curve types

* DA translated

* CN translated

* TW translated

* IT translated

* Update da.h

* DE translated

* FR translated

* CZ translated

* chore: Remove trailing whitespace
2023-03-08 11:53:14 +10:00
ulfhedlundandGitHub da428b4e57 chore: Translate pots slider warnings (#3281)
* Add files via upload

* Add files via upload

* Add files via upload

* Add files via upload

* Add files via upload

* Add files via upload

* Translations for pot/slider check

* Translation for pot/slider check

* Add files via upload

* Updated da.h

* Updated de.h

* Update cz.h

* Update cn.h

* Update en.h

* Update es.h

* Update fi.h

* Update fr.h

* Update it.h

* Update jp.h

* Update nl.h

* Update pl.h

* Update pt.h

* Update tw.h

* Added translation for JP

* Update cn.h

* Translation for TW

* Update se.h

* TR_PREFLIGHT_POTSLIDER_CHECK translated for PL
2023-03-07 12:39:06 +10:00
philmozandGitHub 54d0222c53 chore(color): LVGL update, translation strings for theme file carousel (#3278)
* Use StaticText instead of 'paint' function for 'loading' message in theme file carousel,
Add message strings to translation files.

* Update translation.

* Update translation.

* Update translation.

* Update translation.

* Update translation.

* Update translation.

* Update translation.
2023-03-07 11:58:06 +10:00
EldenrootandGitHub 3720633365 fix: Wrong case used for units of time (#3314)
* Update cz.h

* Update cn.h

* Update da.h

* Update de.h

* Update en.h

* Update es.h

* Update fi.h

* Update fr.h

* Update it.h

* Update jp.h

* Update nl.h

* Update pl.h

* Update pt.h

* Update se.h
2023-03-07 11:12:48 +10:00
HThurenandGitHub d927a8d687 feat: Bootloader translated from EN to native language (#2946)
* Basic change

* Other languages

* Minor correction

* IT translated

* Minor correction

* Fix enable / disable in ascii only

* Fix enable / disable in ascii only

* Update cn.h

Fix enable / disable at nv14 bootloader

* Update cz.h

Fix enable / disable at nv14 bootloader

* Update de.h

Fix enable / disable at nv14 bootloader

* Update es.h

Fix enable / disable at nv14 bootloader

* Update fi.h

Fix enable / disable at nv14 bootloader

* Update fr.h

Fix enable / disable at nv14 bootloader

* Update it.h

Fix enable / disable at nv14 bootloader

* Update jp.h

Fix enable / disable at nv14 bootloader

* Update nl.h

Fix enable / disable at nv14 bootloader

* Update se.h

Fix enable / disable at nv14 bootloader
Only use of Ascii in bootloader

* Update pt.h

Fix enable / disable at nv14 bootloader

* Update de.h

Fix enable / disable at nv14 bootloader

* Update pl.h

Fix enable / disable at nv14 bootloader

* Update tw.h

Fix enable / disable at nv14 bootloader
Only use of Ascii in bootloader
2023-02-27 21:50:12 +10:00
philmozandGitHub ad46f1ca42 fix(translation): Missing comma in FR translation (#3270) 2023-02-27 14:28:34 +10:00
philmozandGitHub f81e140cf3 fix(color): LVGLify themes page and fix several possible string handling issues (#3135)
* Convert theme select, theme edit and color edit pages to LVGL flex.
Add 'Edit Color' string to language files (requires translations).
Simplify theme edit 'onCancel' logic.
Fix size of buttons in ConfirmDialog for portrait layout.
Truncate item strings in ListBox to fit available space.
Set window background color on Page and TabsGroup classes instead of using 'paint' function.
Replace strncpy and strncat with strAppend - avoid possible unterminated strings and string overrun.
Truncate display of long name and author strings in theme pages.

* Revert code to truncate ListBox entry strings as it causes other issues.

* Adjust layout for theme color editor to fit large hex string size.

* Remove unnecessary copying of the ThemeFile object being edited.
Refresh TabsGroup page background color when theme changes.

* Set selected theme in list on long press as well as short press.
Comment out unused 'title' in ListBox.

* Handle default theme like custom themes on SD card:
- show logo when selecting theme
- support background_WxH.png names for background images
Use f_stat( via isFileAvailable) instead of opening and closing files to check for existence.

* Remove debug print.

* Fix rebase.
2023-02-27 11:40:02 +10:00
97c57cf9ee feat(colorlcd): Value widget text alignment options (#3080)
* Adds option to align value widget label and value to left, center or right border of the widget zone.

* Cpn sync

* Typofix thx to @Eldenroot

* fix: Add `TW` translation

* fix: Two spaces for indent

---------

Co-authored-by: elecpower <neilh713@tpg.com.au>
2023-02-20 14:57:58 +10:00
HThurenandGitHub 27bf42d038 chore(translation): Updates to Danish - telemetri plot 🇩🇰 (#3166) 2023-02-15 16:24:38 +10:00
ulfhedlundandGitHub 205342b9b4 chore(translation): Swedish translation updates 🇸🇪 (#3194)
* A few additions and minor changes

* Minor changes

* Added timer string for PR #3173

* Missing save and delete theme

Added missing strings for Save theme and Delete theme
2023-02-15 13:03:16 +10:00
Raphael CoefficandGitHub 5f17156036 fix(b&w): Missing STRT timer labels (#3173) 2023-02-14 12:05:39 +10:00
philmozandGitHub 00c38511cb feat(colorlcd): Improve trainer page layout, use Add/Replace instead of +=/:= (#3104)
* Adjust trainer setup layout to better use space and avoid scrolling.

* Adjust padding for landscape layout.

* Change text for trainer mode to 'Add' and 'Replace' instead of '+=' and ':='. Adjust layout to fit. Copy translations from TR_VMLTPX strings.
2023-02-13 20:30:52 +10:00
MichaelandGitHub 2470cedf38 chore: Remove obsolete language defines, single source for telemetry sensor names (#3119)
* - all telemetry sensor name definitions in one place (untranslated.h)

- all telemetry sensor name definitions follow the naming convention STR_SENSOR_<sensor>
- eliminated one redundant definition
- editorial updates to telemetry protocols code to reflect the naming convention changes
- re-introduced translations in da.h (STR_SENSOR_THROTTLE and STR_SENSOR_SPEED)
- re-introduced translation in it.h (STR_SENSOR_GPSDATETIME)
- re-introduced translation for fr.h ( STR_SENSOR_BATT)
- saved 160 Bytes of flash

* removed obsolete translation

saved 280 byte flash memory in total

* finally removed extern const char STR_MENUTEMPLATES[]; definition

adjusted da.h, fr.h, it.h local sensor name definitions to naming conventions STR_SENSOR_<senosr>

* corrected merge

removed obsolete #ifdef

* some more obsolete ones

* added TW and CN translation for TR_PERIOD and TR_INTERVAL

fixed problem in /radio/src/gui/colorlcd/fullscreen_dialog.cpp preventing builds for CZ, IT and FR languages
2023-02-10 19:49:41 +10:00