310 lines
13 KiB
C++
310 lines
13 KiB
C++
/*
|
|
* Copyright (C) OpenTX
|
|
*
|
|
* Based on code named
|
|
* th9x - http://code.google.com/p/th9x
|
|
* er9x - http://code.google.com/p/er9x
|
|
* gruvin9x - http://code.google.com/p/gruvin9x
|
|
*
|
|
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "opentx.h"
|
|
|
|
void extmoduleSendNextFrame();
|
|
|
|
void extmoduleStop()
|
|
{
|
|
EXTERNAL_MODULE_OFF();
|
|
|
|
NVIC_DisableIRQ(EXTMODULE_DMA_IRQn);
|
|
NVIC_DisableIRQ(EXTMODULE_TIMER_IRQn);
|
|
|
|
EXTMODULE_DMA_STREAM->CR &= ~DMA_SxCR_EN; // Disable DMA
|
|
EXTMODULE_TIMER->DIER &= ~(TIM_DIER_CC2IE | TIM_DIER_UDE);
|
|
EXTMODULE_TIMER->CR1 &= ~TIM_CR1_CEN;
|
|
}
|
|
|
|
void extmoduleNoneStart()
|
|
{
|
|
EXTERNAL_MODULE_OFF();
|
|
|
|
GPIO_PinAFConfig(EXTMODULE_PPM_GPIO, EXTMODULE_PPM_GPIO_PinSource, 0);
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Pin = EXTMODULE_PPM_GPIO_PIN;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|
GPIO_Init(EXTMODULE_PPM_GPIO, &GPIO_InitStructure);
|
|
GPIO_SetBits(EXTMODULE_PPM_GPIO, EXTMODULE_PPM_GPIO_PIN); // Set high
|
|
|
|
EXTMODULE_TIMER->CR1 &= ~TIM_CR1_CEN;
|
|
EXTMODULE_TIMER->PSC = EXTMODULE_TIMER_FREQ / 2000000 - 1; // 0.5uS (2Mhz)
|
|
EXTMODULE_TIMER->ARR = 36000; // 18mS
|
|
EXTMODULE_TIMER->CCR2 = 32000; // Update time
|
|
EXTMODULE_TIMER->EGR = 1; // Restart
|
|
EXTMODULE_TIMER->SR &= ~TIM_SR_CC2IF;
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_CC2IE; // Enable this interrupt
|
|
EXTMODULE_TIMER->CR1 |= TIM_CR1_CEN;
|
|
|
|
NVIC_EnableIRQ(EXTMODULE_TIMER_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_TIMER_IRQn, 7);
|
|
}
|
|
|
|
void extmodulePpmStart()
|
|
{
|
|
EXTERNAL_MODULE_ON();
|
|
|
|
GPIO_PinAFConfig(EXTMODULE_PPM_GPIO, EXTMODULE_PPM_GPIO_PinSource, EXTMODULE_PPM_GPIO_AF);
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Pin = EXTMODULE_PPM_GPIO_PIN;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|
GPIO_Init(EXTMODULE_PPM_GPIO, &GPIO_InitStructure);
|
|
|
|
// PPM generation principle:
|
|
//
|
|
// Hardware timer in PWM mode is used for PPM generation
|
|
// Output is OFF if CNT<CCR1(delay) and ON if bigger
|
|
// CCR1 register defines duration of pulse length and is constant
|
|
// AAR register defines duration of each pulse, it is
|
|
// updated after every pulse in Update interrupt handler.
|
|
// CCR2 register defines duration of no pulses (time between two pulse trains)
|
|
// it is calculated every round to have PPM period constant.
|
|
// CC2 interrupt is then used to setup new PPM values for the
|
|
// next PPM pulses train.
|
|
|
|
EXTMODULE_TIMER->CR1 &= ~TIM_CR1_CEN; // Stop timer
|
|
EXTMODULE_TIMER->PSC = EXTMODULE_TIMER_FREQ / 2000000 - 1; // 0.5uS (2Mhz)
|
|
EXTMODULE_TIMER->ARR = 45000;
|
|
#if defined(PCBX10) || PCBREV >= 13
|
|
EXTMODULE_TIMER->CCMR2 = TIM_CCMR2_OC3M_1 | TIM_CCMR2_OC3M_2; // PWM mode 1
|
|
EXTMODULE_TIMER->BDTR = TIM_BDTR_MOE;
|
|
EXTMODULE_TIMER->EGR = 1; // Reloads register values now
|
|
EXTMODULE_TIMER->DIER = TIM_DIER_UDE; // Update DMA request
|
|
EXTMODULE_TIMER->CR1 = TIM_CR1_CEN; // Start timer
|
|
#else
|
|
EXTMODULE_TIMER->CCR1 = GET_PPM_DELAY(EXTERNAL_MODULE)*2;
|
|
EXTMODULE_TIMER->CCER = TIM_CCER_CC1E | (GET_PPM_POLARITY(EXTERNAL_MODULE) ? TIM_CCER_CC1P : 0);
|
|
EXTMODULE_TIMER->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0; // Force O/P high
|
|
EXTMODULE_TIMER->EGR = 1; // Reloads register values now
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_UDE; // Update DMA request
|
|
EXTMODULE_TIMER->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC2PE; // PWM mode 1
|
|
EXTMODULE_TIMER->CR1 |= TIM_CR1_CEN; // Start timer
|
|
#endif
|
|
|
|
extmoduleSendNextFrame();
|
|
|
|
NVIC_EnableIRQ(EXTMODULE_DMA_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_DMA_IRQn, 7);
|
|
NVIC_EnableIRQ(EXTMODULE_TIMER_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_TIMER_IRQn, 7);
|
|
}
|
|
|
|
void extmodulePxxStart()
|
|
{
|
|
EXTERNAL_MODULE_ON();
|
|
|
|
GPIO_PinAFConfig(EXTMODULE_PPM_GPIO, EXTMODULE_PPM_GPIO_PinSource, EXTMODULE_PPM_GPIO_AF);
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Pin = EXTMODULE_PPM_GPIO_PIN;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|
GPIO_Init(EXTMODULE_PPM_GPIO, &GPIO_InitStructure);
|
|
|
|
EXTMODULE_TIMER->CR1 &= ~TIM_CR1_CEN;
|
|
EXTMODULE_TIMER->PSC = EXTMODULE_TIMER_FREQ / 2000000 - 1; // 0.5uS (2Mhz)
|
|
EXTMODULE_TIMER->ARR = 18000;
|
|
|
|
#if defined(PCBX10) || PCBREV >= 13
|
|
EXTMODULE_TIMER->CCER = TIM_CCER_CC3E | TIM_CCER_CC3NE;
|
|
EXTMODULE_TIMER->BDTR = TIM_BDTR_MOE; // Enable outputs
|
|
EXTMODULE_TIMER->CCR3 = 18;
|
|
EXTMODULE_TIMER->CCMR2 = TIM_CCMR2_OC3M_2 | TIM_CCMR2_OC3M_0; // Force O/P high
|
|
EXTMODULE_TIMER->EGR = 1; // Restart
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_UDE; // Enable DMA on update
|
|
EXTMODULE_TIMER->CCMR2 = TIM_CCMR2_OC3M_1 | TIM_CCMR2_OC3M_2;
|
|
EXTMODULE_TIMER->CR1 |= TIM_CR1_CEN;
|
|
#else
|
|
EXTMODULE_TIMER->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P | TIM_CCER_CC1NE | TIM_CCER_CC1NP; // TIM_CCER_CC1E | TIM_CCER_CC1P;
|
|
EXTMODULE_TIMER->BDTR = TIM_BDTR_MOE; // Enable outputs
|
|
EXTMODULE_TIMER->CCR1 = 18;
|
|
EXTMODULE_TIMER->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0; // Force O/P high
|
|
EXTMODULE_TIMER->EGR = 1; // Restart
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_UDE; // Enable DMA on update
|
|
EXTMODULE_TIMER->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2;
|
|
EXTMODULE_TIMER->CR1 |= TIM_CR1_CEN;
|
|
#endif
|
|
|
|
extmoduleSendNextFrame();
|
|
|
|
NVIC_EnableIRQ(EXTMODULE_DMA_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_DMA_IRQn, 7);
|
|
NVIC_EnableIRQ(EXTMODULE_TIMER_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_TIMER_IRQn, 7);
|
|
}
|
|
|
|
#if defined(DSM2)
|
|
void extmoduleDsm2Start()
|
|
{
|
|
EXTERNAL_MODULE_ON();
|
|
|
|
GPIO_PinAFConfig(EXTMODULE_PPM_GPIO, EXTMODULE_PPM_GPIO_PinSource, EXTMODULE_PPM_GPIO_AF);
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Pin = EXTMODULE_PPM_GPIO_PIN;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|
GPIO_Init(EXTMODULE_PPM_GPIO, &GPIO_InitStructure);
|
|
|
|
EXTMODULE_TIMER->CR1 &= ~TIM_CR1_CEN;
|
|
EXTMODULE_TIMER->PSC = EXTMODULE_TIMER_FREQ / 2000000 - 1; // 0.5uS (2Mhz)
|
|
EXTMODULE_TIMER->ARR = 44000; // 22mS
|
|
|
|
#if defined(PCBX10) || PCBREV >= 13
|
|
EXTMODULE_TIMER->CCER = TIM_CCER_CC3E | TIM_CCER_CC3P;
|
|
EXTMODULE_TIMER->BDTR = TIM_BDTR_MOE; // Enable outputs
|
|
EXTMODULE_TIMER->CCR3 = 0;
|
|
EXTMODULE_TIMER->CCMR2 = TIM_CCMR2_OC3M_2 | TIM_CCMR2_OC3M_0; // Force O/P high
|
|
EXTMODULE_TIMER->EGR = 1; // Restart
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_UDE; // Enable DMA on update
|
|
EXTMODULE_TIMER->CCMR2 = TIM_CCMR2_OC3M_1 | TIM_CCMR2_OC3M_0;
|
|
EXTMODULE_TIMER->CR1 |= TIM_CR1_CEN;
|
|
#else
|
|
EXTMODULE_TIMER->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P;
|
|
EXTMODULE_TIMER->BDTR = TIM_BDTR_MOE; // Enable outputs
|
|
EXTMODULE_TIMER->CCR1 = 0;
|
|
EXTMODULE_TIMER->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0; // Force O/P high
|
|
EXTMODULE_TIMER->EGR = 1; // Restart
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_UDE; // Enable DMA on update
|
|
EXTMODULE_TIMER->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0;
|
|
EXTMODULE_TIMER->CR1 |= TIM_CR1_CEN;
|
|
#endif
|
|
|
|
extmoduleSendNextFrame();
|
|
|
|
NVIC_EnableIRQ(EXTMODULE_DMA_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_DMA_IRQn, 7);
|
|
NVIC_EnableIRQ(EXTMODULE_TIMER_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_TIMER_IRQn, 7);
|
|
}
|
|
#endif
|
|
|
|
void extmoduleCrossfireStart()
|
|
{
|
|
EXTERNAL_MODULE_ON();
|
|
|
|
GPIO_PinAFConfig(EXTMODULE_PPM_GPIO, EXTMODULE_PPM_GPIO_PinSource, 0);
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Pin = EXTMODULE_PPM_GPIO_PIN;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|
GPIO_Init(EXTMODULE_PPM_GPIO, &GPIO_InitStructure);
|
|
GPIO_SetBits(EXTMODULE_PPM_GPIO, EXTMODULE_PPM_GPIO_PIN); // Set high
|
|
|
|
EXTMODULE_TIMER->CR1 &= ~TIM_CR1_CEN;
|
|
EXTMODULE_TIMER->PSC = EXTMODULE_TIMER_FREQ / 2000000 - 1; // 0.5uS (2Mhz)
|
|
EXTMODULE_TIMER->ARR = (2000 * CROSSFIRE_FRAME_PERIOD);
|
|
EXTMODULE_TIMER->CCR2 = (2000 * CROSSFIRE_FRAME_PERIOD) - 1000;
|
|
EXTMODULE_TIMER->EGR = 1; // Restart
|
|
EXTMODULE_TIMER->SR &= ~TIM_SR_CC2IF;
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_CC2IE; // Enable this interrupt
|
|
EXTMODULE_TIMER->CR1 |= TIM_CR1_CEN;
|
|
|
|
NVIC_EnableIRQ(EXTMODULE_TIMER_IRQn);
|
|
NVIC_SetPriority(EXTMODULE_TIMER_IRQn, 7);
|
|
}
|
|
|
|
void extmoduleSendNextFrame()
|
|
{
|
|
if (s_current_protocol[EXTERNAL_MODULE] == PROTO_PPM) {
|
|
#if defined(PCBX10) || PCBREV >= 13
|
|
EXTMODULE_TIMER->CCR3 = GET_PPM_DELAY(EXTERNAL_MODULE)*2;
|
|
EXTMODULE_TIMER->CCER = TIM_CCER_CC3E | (GET_PPM_POLARITY(EXTERNAL_MODULE) ? TIM_CCER_CC3P : 0);
|
|
EXTMODULE_TIMER->CCR2 = *(modulePulsesData[EXTERNAL_MODULE].ppm.ptr - 1) - 4000; // 2mS in advance
|
|
EXTMODULE_DMA_STREAM->CR &= ~DMA_SxCR_EN; // Disable DMA
|
|
EXTMODULE_DMA_STREAM->CR |= EXTMODULE_DMA_CHANNEL | DMA_SxCR_DIR_0 | DMA_SxCR_MINC | DMA_SxCR_PSIZE_0 | DMA_SxCR_MSIZE_0 | DMA_SxCR_PL_0 | DMA_SxCR_PL_1;
|
|
#else
|
|
EXTMODULE_TIMER->CCR1 = GET_PPM_DELAY(EXTERNAL_MODULE)*2;
|
|
EXTMODULE_TIMER->CCER = TIM_CCER_CC1E | (GET_PPM_POLARITY(EXTERNAL_MODULE) ? TIM_CCER_CC1P : 0);
|
|
EXTMODULE_TIMER->CCR2 = *(modulePulsesData[EXTERNAL_MODULE].ppm.ptr - 1) - 4000; // 2mS in advance
|
|
EXTMODULE_DMA_STREAM->CR &= ~DMA_SxCR_EN; // Disable DMA
|
|
EXTMODULE_DMA_STREAM->CR |= EXTMODULE_DMA_CHANNEL | DMA_SxCR_DIR_0 | DMA_SxCR_MINC | DMA_SxCR_PSIZE_1 | DMA_SxCR_MSIZE_1 | DMA_SxCR_PL_0 | DMA_SxCR_PL_1;
|
|
#endif
|
|
EXTMODULE_DMA_STREAM->PAR = CONVERT_PTR_UINT(&EXTMODULE_TIMER->ARR);
|
|
EXTMODULE_DMA_STREAM->M0AR = CONVERT_PTR_UINT(modulePulsesData[EXTERNAL_MODULE].ppm.pulses);
|
|
EXTMODULE_DMA_STREAM->NDTR = modulePulsesData[EXTERNAL_MODULE].ppm.ptr - modulePulsesData[EXTERNAL_MODULE].ppm.pulses;
|
|
EXTMODULE_DMA_STREAM->CR |= DMA_SxCR_EN | DMA_SxCR_TCIE; // Enable DMA
|
|
}
|
|
else if (s_current_protocol[EXTERNAL_MODULE] == PROTO_PXX) {
|
|
EXTMODULE_TIMER->CCR2 = *(modulePulsesData[EXTERNAL_MODULE].pxx.ptr - 1) - 4000; // 2mS in advance
|
|
EXTMODULE_DMA_STREAM->CR &= ~DMA_SxCR_EN; // Disable DMA
|
|
#if defined(PCBX10) || PCBREV >= 13
|
|
EXTMODULE_DMA_STREAM->CR |= EXTMODULE_DMA_CHANNEL | DMA_SxCR_DIR_0 | DMA_SxCR_MINC | DMA_SxCR_PSIZE_0 | DMA_SxCR_MSIZE_0 | DMA_SxCR_PL_0 | DMA_SxCR_PL_1;
|
|
#else
|
|
EXTMODULE_DMA_STREAM->CR |= EXTMODULE_DMA_CHANNEL | DMA_SxCR_DIR_0 | DMA_SxCR_MINC | DMA_SxCR_PSIZE_1 | DMA_SxCR_MSIZE_1 | DMA_SxCR_PL_0 | DMA_SxCR_PL_1;
|
|
#endif
|
|
EXTMODULE_DMA_STREAM->PAR = CONVERT_PTR_UINT(&EXTMODULE_TIMER->ARR);
|
|
EXTMODULE_DMA_STREAM->M0AR = CONVERT_PTR_UINT(modulePulsesData[EXTERNAL_MODULE].pxx.pulses);
|
|
EXTMODULE_DMA_STREAM->NDTR = modulePulsesData[EXTERNAL_MODULE].pxx.ptr - modulePulsesData[EXTERNAL_MODULE].pxx.pulses;
|
|
EXTMODULE_DMA_STREAM->CR |= DMA_SxCR_EN | DMA_SxCR_TCIE; // Enable DMA
|
|
}
|
|
else if (IS_DSM2_PROTOCOL(s_current_protocol[EXTERNAL_MODULE]) || IS_MULTIMODULE_PROTOCOL(s_current_protocol[EXTERNAL_MODULE])) {
|
|
EXTMODULE_TIMER->CCR2 = *(modulePulsesData[EXTERNAL_MODULE].dsm2.ptr - 1) - 4000; // 2mS in advance
|
|
EXTMODULE_DMA_STREAM->CR &= ~DMA_SxCR_EN; // Disable DMA
|
|
#if defined(PCBX10) || PCBREV >= 13
|
|
EXTMODULE_DMA_STREAM->CR |= EXTMODULE_DMA_CHANNEL | DMA_SxCR_DIR_0 | DMA_SxCR_MINC | DMA_SxCR_PSIZE_0 | DMA_SxCR_MSIZE_0 | DMA_SxCR_PL_0 | DMA_SxCR_PL_1;
|
|
#else
|
|
EXTMODULE_DMA_STREAM->CR |= EXTMODULE_DMA_CHANNEL | DMA_SxCR_DIR_0 | DMA_SxCR_MINC | DMA_SxCR_PSIZE_1 | DMA_SxCR_MSIZE_1 | DMA_SxCR_PL_0 | DMA_SxCR_PL_1;
|
|
#endif
|
|
EXTMODULE_DMA_STREAM->PAR = CONVERT_PTR_UINT(&EXTMODULE_TIMER->ARR);
|
|
EXTMODULE_DMA_STREAM->M0AR = CONVERT_PTR_UINT(modulePulsesData[EXTERNAL_MODULE].dsm2.pulses);
|
|
EXTMODULE_DMA_STREAM->NDTR = modulePulsesData[EXTERNAL_MODULE].dsm2.ptr - modulePulsesData[EXTERNAL_MODULE].dsm2.pulses;
|
|
EXTMODULE_DMA_STREAM->CR |= DMA_SxCR_EN | DMA_SxCR_TCIE; // Enable DMA
|
|
}
|
|
else {
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_CC2IE;
|
|
}
|
|
}
|
|
|
|
extern "C" void EXTMODULE_DMA_IRQHandler()
|
|
{
|
|
if (!DMA_GetITStatus(EXTMODULE_DMA_STREAM, EXTMODULE_DMA_FLAG_TC))
|
|
return;
|
|
|
|
DMA_ClearITPendingBit(EXTMODULE_DMA_STREAM, EXTMODULE_DMA_FLAG_TC);
|
|
|
|
EXTMODULE_TIMER->SR &= ~TIM_SR_CC2IF; // Clear flag
|
|
EXTMODULE_TIMER->DIER |= TIM_DIER_CC2IE; // Enable this interrupt
|
|
}
|
|
|
|
extern "C" void EXTMODULE_TIMER_IRQHandler()
|
|
{
|
|
EXTMODULE_TIMER->DIER &= ~TIM_DIER_CC2IE; // Stop this interrupt
|
|
EXTMODULE_TIMER->SR &= ~TIM_SR_CC2IF;
|
|
setupPulses(EXTERNAL_MODULE);
|
|
extmoduleSendNextFrame();
|
|
}
|