piotr
41552b4797
Build Ground Station / build (push) Successful in 37s
Drive two independent visual layers per display target from one shared video presence signal: the fullscreen fallback/menu canvas below video and a transparent, input-transparent OSD overlay above video, reserved as the future flight OSD rendering surface. WFB and video decode stay out of the UI process; pilot video keeps rendering priority.
63 lines
2.6 KiB
Markdown
63 lines
2.6 KiB
Markdown
# Ground Station
|
|
|
|
Orange Pi Zero 3W supervisor and kiosk display for the custom OpenIPC/WFB ground station.
|
|
|
|
## Components
|
|
|
|
The ARM64 artifact intentionally contains two executables:
|
|
|
|
- `groundstation-linux-arm64` — the long-running root supervisor. It owns the GX12 UART, logging, RC state, video lifecycle, and starts the display process.
|
|
- `groundstation-display-linux-arm64` — the unprivileged X11 kiosk renderer. It runs as `orangepi` on `DISPLAY=:0`; the supervisor owns it during normal use.
|
|
|
|
Current capabilities:
|
|
|
|
- receives framed GX12 RC channel data at 115200 8N1;
|
|
- validates protocol version, frame length and CRC-16;
|
|
- logs channel changes instead of every frame;
|
|
- starts/stops `fpv-video` from the configured CH6 power/lifecycle control;
|
|
- starts an independent kiosk display before video, tolerates temporary X11 downtime without restarting the supervisor, and stops deterministically on shutdown;
|
|
- keeps the fullscreen fallback/menu canvas below `fpv-video`, showing `Brak połączenia WFB` only while video is absent;
|
|
- maps a transparent, input-transparent OSD overlay above `fpv-video` as the reserved flight OSD rendering surface: it never presents pixels over the video or intercepts its input.
|
|
|
|
Future MIPI/touch targets use their own templates rather than sharing one global layout. The flight OSD will render on the existing transparent layer above video, preserving the pilot stream's priority.
|
|
|
|
## Installation on Orange Pi
|
|
|
|
Extract the artifact and install **both** files:
|
|
|
|
```bash
|
|
sudo install -m 0755 groundstation-linux-arm64 /usr/local/bin/groundstation
|
|
sudo install -m 0755 groundstation-display-linux-arm64 /usr/local/bin/groundstation-display
|
|
sudo systemctl restart groundstation
|
|
```
|
|
|
|
Check logs:
|
|
|
|
```bash
|
|
systemctl status groundstation --no-pager
|
|
journalctl -u groundstation -b --no-pager -n 80
|
|
```
|
|
|
|
Do not run `groundstation-display` by hand during normal operation. It needs the X11 user/session environment and is managed by the supervisor. For isolated renderer debugging it supports:
|
|
|
|
```bash
|
|
groundstation-display -target x11
|
|
```
|
|
|
|
## Configuration
|
|
|
|
The service reads `/etc/groundstation/config.yml`. For the verified permanent GX12 connection, use:
|
|
|
|
```yaml
|
|
serial:
|
|
path: /dev/ttyS2
|
|
```
|
|
|
|
`/dev/ttyS0` is the Orange Pi boot/debug UART and must not be used for the permanently connected GX12.
|
|
|
|
## Runtime dependencies
|
|
|
|
- X11 session on `:0` owned by `orangepi`; the kiosk waits for X11 and reconnects after display-manager restarts;
|
|
- `wmctrl` for the fullscreen/stacking kiosk window states; without it the kiosk windows map as normal windows and the condition is logged;
|
|
- `runuser` from util-linux for the unprivileged kiosk launch.
|