Add t31_lite_zte-k545 device profile (ZTE K545, SC4336, ATBM6012B Wi-Fi) (#151)

A clone of the in-tree t31_lite_zte-k540 with the K545's own deltas: gpio-motors driven by ptz_control/ptz_gpio rather than the older motors package, majestic IR-cut, backlight and speaker pins, and the same SD-card detect patch (GPIO_PB(18) is pin 50). It reuses K540's atbm603x-t31-zte-k540 wlandev profile, which is already upstream in firmware's shared adapter table. Built green on CI, narrowed to this device. Two points left open with the author, both inherited from K540 rather than introduced here: the defconfig declares an 8M flash while the README row says NOR_16M, which caps the rootfs partition at 5120KB instead of 8192KB; and the device ships no t31_lite.list, as K540 does not either.
2026-09-11 20:27:47 +03:00
parent 3bd11b95cc
commit 4a96c82eb4
4 changed files with 135 additions and 0 deletions
@@ -102,6 +102,7 @@ Xiaomi MJSXJ03HL         T31N         JXQ03P    RTL8189FS_SDIO   NOR_16M   done
 Xiaomi MJSXJ05HL         T31L         GC2053    ATBM6031_SDIO    NOR_16M   preparation
 YuanCam DGK-423403       HI3518EV300  JXH62     RTL8188FU_USB    NOR_8M    research
 ZTE K540                 T31X         SC4336    ATBM6012B_USB    NOR_16M   done
+ZTE K545                 T31X         SC4336    ATBM6012B_USB    NOR_16M   done
 4G Camera XG521 V1.2     GK7202V300   GC1054    EC800E-CN_USB    NOR_8M    done
 XM IPG-G3-WR             GK7202V300   JXH63     ATBM60321S_USB   NOR_8M    done
 ```
@@ -0,0 +1,71 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_xburst=y
+# BR2_MIPS_SOFT_FLOAT is not set
+BR2_MIPS_FP32_MODE_32=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/$(OPENIPC_TOOLCHAIN).tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="mipsel-openipc-linux-musl"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/$(OPENIPC_KERNEL).tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/t31.generic.config"
+BR2_LINUX_KERNEL_LZMA=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+# BR2_PACKAGE_WIREGUARD_LINUX_COMPAT is not set
+# BR2_PACKAGE_WIREGUARD_TOOLS is not set
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="ingenic"
+BR2_OPENIPC_SOC_MODEL="t31"
+BR2_OPENIPC_SOC_FAMILY="t31"
+BR2_OPENIPC_SNS_MODEL="sc4336"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+BR2_PACKAGE_ATBM60XX=y
+BR2_PACKAGE_ATBM60XX_MODEL_603X=y
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_INGENIC_OSDRV_T31=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+# BR2_PACKAGE_MOTORS is not set
+BR2_PACKAGE_GPIO_MOTORS=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+# BR2_PACKAGE_QUIRC_OPENIPC=y
+# BR2_PACKAGE_VTUND_OPENIPC is not set
+BR2_PACKAGE_YAML_CLI=y
@@ -0,0 +1,50 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t31_lite_zte-k545-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .nightMode.irCutPin1 57
+cli -s .nightMode.irCutPin2 58
+cli -s .nightMode.colorToGray true
+cli -s .nightMode.backlightPin 11
+cli -s .video0.codec h264
+cli -s .audio.speakerPin 64
+cli -s .audio.speakerPinInvert true
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev atbm603x-t31-zte-k540
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set ptz motor pins
+#
+fw_setenv ptz_control gpio
+fw_setenv ptz_gpio '49 63 62 61 59 52 53 54'
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 64M
+fw_setenv rmem 64M@0x4000000
+#
+# Status LEDs (active low: 0 = on, 1 = off):
+#   Blue:  GPIO 10
+#   Red:   GPIO 16
+#   Green: GPIO 17
+#
+# Example to turn on green LED on boot:
+#   echo 17 > /sys/class/gpio/export 2>/dev/null
+#   echo out > /sys/class/gpio/gpio17/direction 2>/dev/null
+#   echo 0 > /sys/class/gpio/gpio17/value 2>/dev/null
+#
+exit 0
@@ -0,0 +1,13 @@
+diff --git a/arch/mips/xburst/soc-t31/chip-t31/isvp/Swan/board.h b/arch/mips/xburst/soc-t31/chip-t31/isvp/Swan/board.h
+index d9058e1271..b53c252c64 100644
+--- a/arch/mips/xburst/soc-t31/chip-t31/isvp/Swan/board.h
+++ b/arch/mips/xburst/soc-t31/chip-t31/isvp/Swan/board.h
+@@ -32,7 +32,7 @@
+ /* ****************************GPIO MMC START******************************** */
+ #define GPIO_MMC_RST_N			-1
+ #define GPIO_MMC_RST_N_LEVEL	LOW_ENABLE
+-#define GPIO_MMC_CD_N			GPIO_PB(27)
+#define GPIO_MMC_CD_N			GPIO_PB(18)
+ #define GPIO_MMC_CD_N_LEVEL		LOW_ENABLE
+ #define GPIO_MMC_PWR			-1
+ #define GPIO_MMC_PWR_LEVEL		HIGH_ENABLE