The first camera with working autofocus on HiSilicon: the customizer
enables majestic's contrast AF engine (widgetii/majestic#522), which
reads the ISP's BE AF zone statistics and drives this board's XM zoom
block over the same UART the pad uses, serialised by the same lock.
The engine defaults to off everywhere — a lens without a focus motor
must not grow an /autofocus endpoint — so enabling it in the profile
of the board it was proven on is the whole change; port and speed
defaults already match. The WebUI grows an AF button and books a
settle-gated pass after each zoom step (majestic-webui#265).
Verified end to end on the lab unit: from total blur to a tack-sharp
frame, fv 30 -> 5126 against a 5606 peak in 21s.
XiongMai's 85H50AI: hi3516ev300 + imx335 with a motorized zoom/focus
module whose MCU shares /dev/ttyAMA0 with the serial console at 115200,
speaking the XM near-Pelco protocol (majestic-webui's btzoom-xm).
Proven on a lab unit driven end to end through the WebUI
(majestic-webui#227).
The defconfig is a byte-copy of firmware's hi3516ev300_lite_defconfig.
customizer.sh (first boot) sets sensor imx335, the upgrade URL, and the
PTZ trio — ptz_control pelco-xm, ptz_port /dev/ttyAMA0, ptz_caps
'zoom focus' (majestic-webui#261) — and deletes the getty line from
/etc/inittab: the MCU owns the console UART. The edit lands in the
overlay and heals itself (an upgrade that wipes the overlay wipes
/etc/custom.ok too, so the script re-runs). S01printk quiets runtime
kernel messages that would drip onto the PTZ wire. The required
hi3516ev300_lite excludes list prunes every non-imx335 sensor blob,
generated from the live lite image so no entry is stale on arrival.