hilink: matched 12-ohm rework restores immediate 480 Mbit/s; acceptance pending

.gitea/workflows/build-hilink.yml

@@ -0,0 +1,66 @@
+name: Build HiLink URLLC firmware
+
+on:
+  workflow_dispatch:
+
+jobs:
+  build:
+    runs-on: openipc-builder
+    timeout-minutes: 360
+    env:
+      DEVICE: ssc338q_fpv_openipc-urllc-aio
+      BR2_DL_DIR: /tmp/builder-dl
+
+    steps:
+      - name: Checkout builder branch
+        uses: actions/checkout@v4
+
+      - name: Verify provisioned Buildroot toolchain
+        shell: bash
+        run: |
+          set -eu
+          id
+          missing=0
+          for tool in \
+            bash bc bison ccache cpio curl file flex gawk gcc git gzip make \
+            patch perl python3 rsync sed tar tree unzip wget xz; do
+            if ! command -v "$tool" >/dev/null 2>&1; then
+              echo "::error::Missing runner dependency: $tool"
+              missing=1
+            fi
+          done
+          test "$missing" = 0
+
+      - name: Build exactly the HiLink URLLC profile
+        shell: bash
+        run: |
+          set -euo pipefail
+          export GIT_HASH="$(git rev-parse --short HEAD)"
+          export GIT_BRANCH="$(git branch --show-current)"
+          mkdir -p "$BR2_DL_DIR" /tmp/ccache
+          ln -s /tmp/ccache "$HOME/.ccache"
+
+          if ! bash builder.sh "$DEVICE"; then
+            echo '--- largest files retained in the failed rootfs ---'
+            find openipc/output/target -type f -printf '%s\t%p\n' | \
+              sort -nr | sed -n '1,100p' || true
+            echo '--- rootfs target usage ---'
+            du -sh openipc/output/target 2>/dev/null || true
+            exit 1
+          fi
+
+          mkdir -p dist
+          firmware=$(find openipc/output/images -type f -name 'openipc*nor*.tgz' -print -quit)
+          test -n "$firmware"
+          cp "$firmware" "dist/${DEVICE}-nor.tgz"
+          sha256sum "dist/${DEVICE}-nor.tgz" > "dist/${DEVICE}-nor.tgz.sha256"
+
+          find dist -maxdepth 1 -type f -printf '%f %s bytes\n'
+          cat "dist/${DEVICE}-nor.tgz.sha256"
+
+      - name: Upload firmware artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: hilink-urllc-${{ github.sha }}
+          retention-days: 30
+          path: dist/*

ci/Dockerfile

@@ -0,0 +1,35 @@
+FROM debian:bookworm-slim
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update \
+ && apt-get install -y --no-install-recommends \
+      bash \
+      bc \
+      bison \
+      build-essential \
+      ca-certificates \
+      ccache \
+      cpio \
+      curl \
+      file \
+      flex \
+      gawk \
+      git \
+      gzip \
+      libncurses-dev \
+      make \
+      nodejs \
+      patch \
+      perl \
+      python3 \
+      rsync \
+      sed \
+      tar \
+      tree \
+      unzip \
+      wget \
+      xz-utils \
+ && rm -rf /var/lib/apt/lists/*
+
+WORKDIR /workspace

devices/ssc338q_fpv_openipc-urllc-aio/USB-HS-INVESTIGATION.md

@@ -0,0 +1,481 @@
+# RTL8812EU enumerating at 12 Mbit/s on `Sstar-ehci-1` — investigation record (root cause found; acceptance pending)
+
+Device: `ssc338q_fpv_openipc-urllc-aio` (HiLink URLLC, SSC338Q / infinity6e).
+Radio: Realtek RTL8812EU, USB ID `0bda:a81a`, directly attached to the SSC338Q
+USB 2.0 EHCI port (`Sstar-ehci-1`).
+
+## Fixed observations (treated as inputs, not re-derived here)
+
+- The radio repeatedly enumerated at **12 Mbit/s (full speed)** after USB
+  unbind/rebind cycles (pre-rework symptom; HS since restored — see the
+  series-damping experiment below).
+- The active device tree reports `dpdm_swap = <0>` and
+  `power-enable-pad = <PAD_UNKNOWN>` (0xffff).
+- **Verified on hardware (2026-10, Piotr):** the full `soc:Sstar-ehci-1`
+  platform-driver unbind/bind cycle (step 5 below) was performed over
+  Ethernet, waited out, and `/sys/bus/usb/devices/1-1/speed` still returned
+  `12`. A complete HCD/UTMI re-initialization therefore **does not** restore
+  high-speed negotiation on this board.
+- **Verified on hardware (2026-10, Piotr):** changing the input supply
+  capacity did not improve negotiation. Supply-headroom tuning is ruled out.
+- **Verified on hardware (2026-10, Piotr):** the radio is a custom
+  carrier/module assembly, **not** a drop-in USB dongle: a four-wire host
+  harness/pad connection, two RF pigtails, and visible local regulation on
+  the carrier.
+- **Verified on hardware (2026-10, Piotr):** 5.13 V measured directly at the
+  module input, inside the common 4.75–5.25 V input range. The earlier
+  "3.3 V fed into the 5 V input" hypothesis is therefore ruled out **at
+  module ingress** (upstream of the carrier's local regulation).
+- **Verified on hardware (2026-10, Piotr):** each USB data net was physically
+  traced as `SSC338Q-side -> approximately 100 ohm series resistor ->
+  RTL8812EU-module D+ or D-`; each component measured about 100 ohm across
+  its own endpoints with all power removed. These are **two separate
+  per-line series resistors**, not one 100-ohm differential termination.
+- **Verified on hardware (2026-10, Piotr):** both previously verified 100
+  ohm per-line resistors were **replaced with matched 12 ohm parts**;
+  immediately afterward `/sys/bus/usb/devices/1-1/speed` returned **`480`**.
+  This is direct A/B evidence that the original 100 ohm-per-line network
+  **blocked High-Speed negotiation** on this unit.
+- RF/FEC configuration is not a USB fix and is out of scope for this issue.
+- This document contains no credentials, pairing or RF-access material.
+
+## Conclusion (root cause found; acceptance pending)
+
+Combined with the exact vendor EHCI/UTMI source audit below (which found no
+HiLink-specific software discrepancy in anything this overlay or the shipped
+kernel build controls), the verified on-hardware results above eliminate the
+remaining software-adjacent candidates that are cheap to test:
+
+- **Ruled out:** wifibroadcast/OpenIPC configuration, RF/FEC settings,
+  ordinary userspace timing, a simple USB-device rebind, a full
+  HCD/UTMI re-initialization (done on hardware, no change),
+  input-supply-capacity tuning (done on hardware, no change), and
+  wrong-voltage-at-module-ingress (measured 5.13 V at the input, within the
+  4.75–5.25 V range).
+- **Fault domain where the cause was found:** the USB **high-speed physical
+  path / signal integrity / rework** — D+/D− routing and symmetry across
+  the carrier, harness/pads and intervening components, controlled impedance
+  and stubs, series/ESD/common-mode components on the pair, connector and
+  solder integrity, or PHY-side / device-side silicon-level hardware —
+  exactly the boundary detailed in the hardware section below. Two supply
+  points were ruled out specifically (capacity tuning, ingress voltage);
+  power **quality** downstream of the measured input — supply noise/ripple
+  and the carrier's local regulator output — remains untested and stays
+  inside the open (now margin-focused) fault domain.
+
+Two caveats stay attached to this record: the audited paths never
+characterized the vendor PHY's undocumented analog tuning, and this
+document distinguishes **immediate HS restoration from full acceptance** —
+long-term stability and signal margin are unproven (see the acceptance
+gates below).
+
+**Root cause (proven on this unit):** the traced per-line ~100 ohm series
+resistors were the negotiation blocker. FS signaling at 12 Mbit/s is
+edge-slow and tolerant, while HS chirp/negotiation is amplitude- and
+timing-critical; replacing both 100 ohm parts with matched 12 ohm parts
+restored `480` immediately — a direct A/B result. This proof is scoped to
+**this unit**: the exact SSC338Q PHY/reference-design series value remains
+undocumented in this repository (the commonly seen external USB 2.0
+practice of roughly 15-33 ohm is illustrative, not a requirement), so other
+builds of this carrier should not assume 12 ohm is universally correct.
+
+Operating posture: the **12 ohm parts stay installed** and **no further
+resistance changes** are permitted until all three owner-run acceptance
+gates below are recorded. The **4096 kbit/s** conservative limit remains in
+force until then; one immediate speed read does not justify higher WFB
+settings or any claim about long-term signal margin.
+
+## Audited sources
+
+Audited 2026-10-02. Everything the firmware ships is stock upstream of this
+builder overlay — the per-device delta in this repository carries no USB
+configuration at all. Exact provenance used for the audit:
+
+| Artifact | Source | Ref |
+| --- | --- | --- |
+| Kernel | `github.com/openipc/linux`, branch `sigmastar-infinity6e` | branch tip `97b7fc4e` at audit time, Linux 4.9.84 (the defconfig pins the branch, not the SHA, so later builds may move) |
+| Kernel ref resolution | `OpenIPC/firmware` `general/external.mk` | `OPENIPC_KERNEL := $(OPENIPC_SOC_VENDOR)-$(OPENIPC_SOC_FAMILY)` |
+| Kernel config | `OpenIPC/firmware` `br-ext-chip-sigmastar/board/infinity6e/infinity6e-ssc012b.config` | selected by this device's defconfig (`BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE`); moving master, HEAD `1b0d5e2` at audit time |
+| DTB | `arch/arm/boot/dts/infinity6e-ssc012b-s01a.dtb`, built from the in-tree DTS and **compiled into the kernel Image** (`CONFIG_SS_BUILTIN_DTB=y`, `CONFIG_SS_DTB_NAME="infinity6e-ssc012b-s01a"`) | same kernel ref |
+| WiFi driver | OpenIPC package `rtl88x2eu-openipc` → `github.com/libc0607/rtl88x2eu-20230815` (HEAD) + one cflags patch | `general/package/rtl88x2eu-openipc/rtl88x2eu-openipc.mk` |
+| Builder overlay | this repository, `devices/ssc338q_fpv_openipc-urllc-aio/` | working tree |
+
+The bootloader does not hand the kernel an FDT on this platform: with
+`CONFIG_SS_BUILTIN_DTB=y`, `arch/arm/kernel/devtree.c:281-299` falls back to
+the DTB embedded in the Image and merges the bootloader's ATAGs (memory,
+cmdline) into it. The audited DTS is what the running kernel sees.
+
+### Active DT node (matches the reported runtime state)
+
+`arch/arm/boot/dts/infinity6e.dtsi:818-828`:
+
+```
+Sstar-ehci-1 {
+    compatible = "Sstar-ehci-1";
+    clocks = <&CLK_utmi>;
+    camclk = <CAMCLK_utmi>;          /* compiled out: CONFIG_CAM_CLK is not set */
+    interrupts = <GIC_SPI INT_IRQ_UHC IRQ_TYPE_LEVEL_HIGH>;
+    dpdm_swap=<0>;
+    power-enable-pad = <PAD_UNKNOWN>;
+    status = "ok";
+};
+```
+
+`PAD_UNKNOWN = 0xFFFF` (`drivers/sstar/include/infinity6e/gpio.h:150`).
+The board DTS `infinity6e-ssc012b-s01a.dts` applies **no** USB override, and
+`CONFIG_SS_BUILTIN_UNFDT` is not set, so the kernel Image's builtin DTB is the
+only device tree in play (see the boot path above). This matches the runtime
+facts exactly.
+
+### Kernel config (USB-relevant, `infinity6e-ssc012b.config`)
+
+- `CONFIG_USB_EHCI_HCD=y` built-in; xHCI/OHCI/DWC2/DWC3 disabled; USB 3.0 node
+  unused for this radio.
+- `CONFIG_MP_USB_MSTAR=y` — enables the Sstar patch set in
+  `drivers/usb/host/ehci-hcd.c` and `drivers/usb/core/hub.c`.
+- `# CONFIG_SS_USB_LOWPWR_SUSPEND is not set`; no USB PHY framework drivers
+  (all UTMI handling is inside the Sstar EHCI driver).
+- `CONFIG_USB_ANNOUNCE_NEW_DEVICES=y` — dmesg reports the enumerated speed.
+
+## HS chirp / squelch / reset / PHY-tuning paths (as built)
+
+All tuning is compile-time; there are no runtime knobs in this repo.
+
+1. **Probe-time UTMI init** — `drivers/sstar/usb/host/ehci-mstar.c`,
+   `Titania3_series_start_ehc()` (lines 232-579), called from
+   `ehci_hcd_mstar_drv_probe()` for `soc:Sstar-ehci-1` (call at line 681):
+   - USBC `0x0a`/`0x28` handshake resets the UHC MAC (lines 297-298).
+   - CA (RX calibration) start/poll at UTMI `0x3c` with a "CA Fail" warning if
+     the result reads all-ones or all-zeros (lines 330-339).
+   - Squelch/disconnect level: `UTMI_DISCON_LEVEL_2A = 0x62`
+     (`ehci-mstar.h:310`) written to UTMI `0x2a` (lines 323-328, 396-397).
+   - Chirp source select UTMI `0x15` bit5 (line 387); new-HW chirp overwrite
+     cleared at UTMI `0x40` bit4 (line 394). `ENABLE_NEW_HW_CHRIP_PATCH` is
+     **not** defined, so the chirp-detect-level register UTMI `0x42` keeps its
+     hardware default.
+   - Eye/ TX tuning: `UTMI_EYE_SETTING_2C..2F = 0x10,0x02,0x00,0x81`
+     (`ehci-mstar.h:355-361`) at UTMI `0x2c..0x2f` (lines 406-410).
+   - `ENABLE_HS_CONNECTION_FAIL_INTO_VFALL_ECO` is on (`ehci-mstar.h:152`),
+     USBC `0x11` bit1 (line 453) — the known "HS connection fails into VFALL"
+     mitigation is active.
+   - DP/DM swap: `_USB_UTMI_DPDM_SWAP_P0 = 0` (`ehci-mstar.h:294`) and
+     `dpdm_swap=<0>` in DT (probe lines 674-678 OR the DT value into `flag`)
+     both agree: no swap. UTMI `0x0b` bit5 stays clear.
+   - `_USB_ANALOG_RX_SQUELCH_PATCH = 0` (`ehci-mstar.h:254-258`): the
+     CA-calibration-based squelch adjustment is compiled out.
+2. **Per-port-reset chirp window** — `drivers/usb/core/hub.c`
+   `hub_port_reset()` (lines 3124-3216), the `_USB_HS_CHIRP_PATCH` block, runs
+   on every root-hub port reset for USB 2.0:
+   - Before asserting reset: eye parameters zeroed (UTMI `0x2c..0x2f`) and
+     squelch switched to `0x80` at UTMI `0x2a` (line 3168) — the value the
+     Sstar chirp patch uses inside the reset window to catch a weak device
+     chirp.
+   - After the reset: eye parameters and squelch `0x62` restored, then a
+     UTMI TX/RX software-reset pulse (UTMI `0x06` bits1:0, lines 3207-3212).
+   - The FS/HS verdict comes from the EHCI port status alone. The
+     speed-report cross-check against the UHC `0x84/0x85` registers is
+     guarded by `_USB_SPEED_REPORT_RESET_PATCH`, which is referenced at
+     `hub.c:3007` but **never defined anywhere** — that block is compiled
+     out in this build.
+3. **Full-speed fallback latch** — `hub.c` "bad dev" retry (lines 6113-6165):
+   after repeated failed enumerations the driver sets UHC `0x40` bit7
+   ("force full speed", line 6138, via `hcd->ehc_base`); it is cleared on
+   root-hub reinit when the
+   device disconnects (lines 2353, 5557-5559). A device that enumerates
+   successfully at FS from insertion did not need this latch — the port
+   verdict itself was FS.
+4. **VBUS gating** — `drivers/sstar/usb/host/infinity6e/usb_pad.c`
+   `Enable_USB_VBUS()` (lines 49-106): the DT property is present
+   (`0xffff`), so the fallback default (`PAD_PM_GPIO2`) is not used; the value
+   is truncated to `(unsigned char)0xffff = 255` (line 80). 255 is out of
+   range on this SoC — `GPIO_NR = 127`
+   (`drivers/sstar/include/infinity6e/gpio.h:149`, range-checked in
+   `mhal_pinmux.c:2054`) — so `gpio_request(255)` fails and the function
+   returns early. The probe ignores the return value
+   (`ehci-mstar.c:680`). Net effect: **no kernel-side VBUS gate**; VBUS to
+   the module is board-hardwired. Consistent with the device enumerating at
+   all.
+5. **Clocks** — nothing in Linux consumes `CLK_utmi`/`CAMCLK_utmi` for this
+   controller: the EHCI driver contains no clock/camclk code at all, so the
+   UTMI reference clock state is inherited from the bootloader. There is no
+   in-Linux analog power-cycle; the closest in-kernel equivalent is a full
+   HCD unbind/rebind (below), which re-runs the whole
+   `Titania3_series_start_ehc()` block including CA calibration.
+6. **WiFi driver** — `rtl88x2eu-20230815` `os_dep/linux/usb_intf.c`
+   (lines 637-661) passively records `pusbd->speed` (`USB_SPEED_FULL` →
+   `RTW_USB_SPEED_1_1`). There is no module parameter, retry or force-HS
+   logic in the Realtek driver; at most it *adapts* to the reported speed
+   (e.g. `USB_FULL_SPEED_BULK_SIZE` in `include/usb_ops.h:128-145`). The
+   speed is decided entirely by the host controller/PHY.
+
+## Why no device-specific software discrepancy was found (in this repository)
+
+- This repository's per-device delta for `ssc338q_fpv_openipc-urllc-aio`
+  contains no USB-host configuration anywhere: the defconfig selects
+  packages/flash size only, `load_sigmastar` drives the camera pipeline only,
+  the overlay seeds WiFi/wifibroadcast config, and the exclude list only
+  trims rootfs files.
+- The defconfig is byte-identical to the closest sibling device
+  (`ssc338q_fpv_openipc-mario-aio`), so there is no per-device divergence to
+  correct.
+- Kernel, builtin DTB and kernel config are stock `openipc/linux`
+  `sigmastar-infinity6e` / `OpenIPC/firmware` artifacts; the DT state
+  (`dpdm_swap=0`, `power-enable-pad=0xffff`) matches the reported runtime
+  state, i.e. the firmware built is the firmware audited.
+- The FS fallback mitigations that exist in the kernel (chirp-window squelch
+  `0x80`, VFALL ECO) are compiled in and active for this build; the
+  speed-report cross-check is compiled out (undefined macro), which weakens
+  detection of a mis-reported speed but cannot by itself cause one.
+- Therefore a device-specific **software** correction within this repository
+  is not justified by the evidence. A real fix would be a kernel-side change
+  (openipc/linux driver/DT) or hardware — both outside this overlay's scope.
+
+### Candidate corrections considered and rejected
+
+- `dpdm_swap=<1>`: a swapped D+/D- pair would break full-speed enumeration
+  too (same pair, same polarity); the device enumerates at FS, so polarity is
+  correct. Flipping it would kill enumeration entirely. Rejected.
+- Enable `_USB_ANALOG_RX_SQUELCH_PATCH` or change `UTMI_DISCON_LEVEL_2A` /
+  eye settings: driver-source macro changes in `openipc/linux`, with no
+  in-repo evidence to pick values; the chirp window already uses the most
+  sensitive squelch (`0x80`). Rejected without on-hardware UTMI measurements.
+- `power-enable-pad` → a real pad: VBUS is evidently board-hardwired
+  (device enumerates with the property at `PAD_UNKNOWN`); pointing the gate
+  at a wrong pad risks switching VBUS off. Rejected.
+- WiFi driver module options: none exist that influence enumeration speed
+  (driver is passive). Rejected.
+
+## HiLink D+/D- hardware / rework investigation boundary
+
+Assembly as observed (2026-10, Piotr): the radio is a custom
+carrier/module — not a drop-in dongle — connected to the host by a
+**four-wire harness/pad** connection, with **two RF pigtails** and visible
+**local regulation** on the carrier. The pad assignments have **not** been
+documented yet; nothing below assumes one.
+
+With the software and software-adjacent candidates ruled out (see the
+conclusion above), the remaining fault domain is the USB **high-speed
+physical path / signal integrity / rework**, explicitly outside software
+scope:
+
+- D+/D- pair routing on the HiLink carrier and through the four-wire
+  harness: continuity and symmetry from the SSC338Q pads to the module
+  pads; controlled impedance along the pair; stubs or test points hanging
+  off it; series resistors / ESD protection / common-mode chokes or other
+  intervening components; via, connector/harness and solder joint integrity.
+- HS chirp failure with FS working is the classic marginal-analog signature:
+  the same pair carries FS traffic fine while the HS chirp (a short,
+  amplitude-critical burst at reset) is missed by the host squelch detector.
+
+**Next physical gate (before any rework):**
+
+1. **Macro photographs of both sides** of the carrier/module — not yet
+   reported.
+2. **Identify all four host pads** — determine which are VBUS, GND, D+,
+   D- (the four-wire harness implies the classic set, but the actual
+   assignment must come from tracing, not assumption) — not yet reported in
+   full; the two data nets and their series resistors have been traced (see
+   the fixed observations above).
+3. **Trace D+/D- end to end**, identifying every intervening component —
+   series resistors, ESD arrays, common-mode chokes, vias, connectors,
+   harness wires — and where the pair leaves the board. **Status: performed
+   for both data nets** — each net is `SSC338Q-side -> ~100 ohm series
+   resistor -> module D+/D-`, each resistor measuring ~100 ohm across its
+   own endpoints, de-energized. No other intervening component was reported
+   on the data nets.
+
+**Safety rule for all continuity/ohmmeter work:** only with **all power
+removed and rails discharged** (unplug, then verify the rails are at 0 V
+before touching meter probes to pads). No powered measurements are proposed
+at this stage.
+
+### Series-damping experiment — COMPLETED AND SUCCESSFUL (2026-10, Piotr)
+
+**Result:** instead of the planned parallel-resistor step, Piotr performed a
+direct A/B replacement: **both 100 ohm per-line series resistors were
+replaced with matched 12 ohm parts**, and `/sys/bus/usb/devices/1-1/speed`
+returned **`480`** immediately afterward. This **proves the original 100
+ohm-per-line network blocked High-Speed negotiation** on this unit. The
+proposed parallel route below is **superseded** (never executed) and is kept
+only as the historical rationale for why the series value was the prime
+suspect.
+
+Rationale (historical): if the ~100 ohm per-line series resistors over-damp
+the pair, reducing the effective per-line series resistance into the range
+of common external USB 2.0 practice may let the HS chirp/eye reach the host
+squelch/timing margins again. This was a **bounded, fully reversible**
+framing: the target value was an example chosen from common practice,
+**not** the documented SSC338Q PHY/reference-design requirement, which
+remains undocumented in this repository.
+
+Proposed steps as planned (historical — superseded by the direct
+replacement actually performed; retained for reproducibility of the method):
+
+Pre-flight gate (no soldering before this is done):
+
+1. Confirm the two resistors' **package size** and mark their **exact
+   locations** (photograph before touching anything).
+2. Confirm the workmanship/ESD plan for soldering on the carrier.
+
+Experiment (reversible — nothing is removed, parts are added in parallel):
+
+1. With **all power removed and rails discharged and verified at 0 V**
+   (same rule as above). The work setup itself must not be able to feed
+   voltage onto the unpowered board — including through the soldering
+   iron's supply path — so use an isolated or battery-powered iron or
+   equivalent isolation. Solder **one matched resistor in parallel across
+   each** existing 100 ohm part — **D+ and D- must be treated
+   identically**.
+2. Example value: 33 ohm in parallel with 100 ohm gives an effective
+   (33 x 100) / (33 + 100) = 3300 / 133 = **24.8 ohm per line** (~25 ohm).
+   Any parallel pair follows R_eff = (R1 x R2) / (R1 + R2); keep the same
+   value on both lines.
+3. Inspect under magnification for **bridges, solder balls or damage** to
+   the parts and neighbours; the two lines must look identical.
+4. **Before restoring power**, measure each modified net again (de-energized)
+   and confirm both read the same effective value, within part tolerance.
+5. Restore power **only after inspection** and run a fresh USB enumeration
+   check (`cat /sys/bus/usb/devices/1-1/speed`).
+
+**Acceptance criterion:** actual **480** Mbit/s negotiation. The
+enumeration result is the only judge of this test: no final line impedance
+or eye-quality outcome is assumed without signal-integrity measurement (a
+later diagnostic above). If behaviour regresses in any way or HS is **not**
+achieved, **revert immediately**: remove the parallel parts to restore the
+original ~100 ohm per line, and record what was observed. Until HS is
+actually demonstrated, keep the **4096 kbit/s** operating limit (see the
+conclusion) regardless of this experiment. (That historical condition is
+now met — the current rule for the 4096 kbit/s limit is the acceptance
+gates in the next subsection, not this paragraph.)
+
+### Acceptance gates after the successful rework (outstanding, owner-run)
+
+Immediate HS restoration is **not yet full acceptance**. The 12 ohm parts
+stay installed, and **no further resistance changes** are to be made until
+all three of these gates are recorded on this unit:
+
+1. **Fresh dmesg** shows a new high-speed enumeration for the radio without
+   relevant USB errors.
+2. A **full `soc:Sstar-ehci-1` platform-driver unbind/bind** (step 5 in the
+   on-device section below, over Ethernet/console) still returns `480`.
+3. The **established wifibroadcast baseline operates stably** with no USB
+   disconnect/reset events during operation.
+
+The **4096 kbit/s** conservative limit stays in force until all three pass;
+do not infer higher WFB settings or long-term signal margin from the single
+immediate `480` read. Safety/rework provenance as documented above applies:
+all board work was and remains de-energized work with verified discharged
+rails.
+
+Isolation diagnostics (historical — moot on this unit now that the root
+cause is fixed and HS is restored; retained for future units of this
+carrier or if symptoms return; all of them need rework access — the radio
+is pad-connected, not socketed, so this may mean a temporary rework socket
+or piggyback harness):
+
+- Try a **known-good HS USB device** (any USB 2.0 flash disk) on the same
+  host pads. HS on the disk but not on the radio points at the
+  carrier/module side; FS on both points at the board-side pair.
+- Try the **RTL8812EU carrier on a different known-good HS host** (a PC).
+  HS there isolates the fault to this board's physical path.
+- With suitable equipment, capture the HS chirp amplitude/eye at the host
+  pads against the USB 2.0 electrical limits.
+
+Any board rework (series resistor changes, pair shortening, shielding)
+invalidates prior software observations; re-verify from the on-device
+commands below after any hardware change.
+
+Evidence status: the platform-driver re-probe (step 5 below), the
+input-supply-capacity change, the module-input voltage measurement, the
+per-line series-resistor tracing (de-energized resistance checks), and the
+series-resistor replacement (100 ohm -> matched 12 ohm per line, both data
+nets) were performed on hardware (2026-10, Piotr). The replacement restored
+`480` immediately; the three acceptance gates above are **outstanding**.
+The register-read diagnostics (steps 1-4 below) have not been reported; the
+parallel-resistor variant was never executed.
+
+## On-device verification (read-only diagnostics; step 5 re-probe already completed on hardware)
+
+Run from a root shell on the device over a link that is **not** the USB radio
+(Ethernet or serial console — see the wlan0 warning in step 5). All register
+reads are read-only `devmem` accesses; do **not** write UTMI/USBC/UHC
+registers from userspace (a write can wedge the bus until reboot).
+Steps 1-4 have not been run/reported on the affected board yet and remain
+the cheapest way to capture register-level evidence (CA calibration result,
+squelch value, line state, force-FS latch) alongside the hardware work.
+
+Register addresses (physical; the RIU window maps virtual `0xFD200000` to
+physical `0x1F200000` — `MS_IO_OFFSET 0xDE000000`,
+`drivers/sstar/include/ms_platform.h:24`, plus `registers.h:37-38`). Register
+number `n` sits at byte offset `2*n`, except odd `n` which sits at `2*n - 1`
+(exactly what `hcd_readb` does, `hub.c:116-129`). All reads are byte or
+16-bit reads at these byte addresses.
+
+| Block | Base (physical) | Derived from |
+| --- | --- | --- |
+| UTMI0 | `0x1F284200` | `_MSTAR_UTMI0_BASE = 0xFD200000 + 0x42100*2` (`ehci-mstar-chip.h:37`) |
+| USBC0 | `0x1F284600` | `+ 0x42300*2` (`ehci-mstar-chip.h:39`) |
+| UHC0 (EHCI) | `0x1F284800` | `+ 0x42400*2` (`ehci-mstar-chip.h:40`) |
+
+1. **Current enumerated speed**
+   ```
+   cat /sys/bus/usb/devices/*/speed        # expect 12 (FS symptom) or 480 (HS fixed)
+   dmesg | grep -E 'new (full|high)-speed USB device'
+   ```
+2. **Force-full-speed latch check** (stuck FS from a past failed HS enum)
+   ```
+   devmem 0x1F284880 8                     # UHC+0x40 bit7: 0x00/0x80
+   ```
+   Expected if healthy: bit7 clear. If bit7 is set, a previous enumeration
+   failure latched FS; disconnect/reconnect the module's power (the
+   root-hub reinit on disconnect clears it) and repeat.
+3. **Port / line state** (all UHC0 = EHCI bank, `hcd->ehc_base`; bit
+   semantics as used by the driver: `hub.c:4998` enable=bit2, `urb.c:532`
+   connect=bit0, `message.c:88` csc=bit1, `hub.c:5801-5802` line state)
+   ```
+   devmem 0x1F284860 8                     # UHC+0x30: bit0 connect, bit1 csc, bit2 enable
+   devmem 0x1F284881 8                     # UHC+0x41: bits2:1 line state (odd reg -> 2n-1)
+   devmem 0x1F284908 8                     # UHC+0x84: bit7 of the speed report
+   devmem 0x1F28490A 8                     # UHC+0x85: bits3:0 of the speed report
+   ```
+   Speed-report composition (`hub.c:3007-3030`; the kernel-side cross-check
+   is compiled out — these are raw hardware registers):
+   `spd = (bit7 of UHC+0x84) | ((UHC+0x85 & 0xf) << 1)`; `0x0c` = high
+   speed, `0x06` = full speed.
+4. **UTMI tuning as left by the driver**
+   ```
+   devmem 0x1F284254 8                      # UTMI+0x2a squelch: expect 0x62 idle
+   devmem 0x1F284278 16                     # UTMI+0x3c CA calibration (16-bit)
+   ```
+   `CA_FAIL` signature (as the driver checks it, `ehci-mstar.c:337-339`):
+   the 16-bit value at UTMI+0x78 masked with `0xFFF0` reading `0x0000` or
+   `0xFFF0` — a failed RX calibration suppresses chirp detection and points
+   at power/analog, not software. `dmesg` also prints `WARNING: CA Fail !!`.
+5. **Full PHY re-init (in-kernel equivalent of a power cycle) — COMPLETED,
+   no improvement** (2026-10, Piotr: performed over Ethernet, device still
+   enumerated at 12 Mbit/s). Kept here for reproducibility:
+   ```
+   ls /sys/bus/platform/drivers/Sstar-ehci-1/          # note the device name
+   echo <device> > /sys/bus/platform/drivers/Sstar-ehci-1/unbind
+   echo <device> > /sys/bus/platform/drivers/Sstar-ehci-1/bind
+   ```
+   Safety: `wlan0` on this device is the USB radio itself (`8812eu`,
+   `S40network:6`), so unbinding the EHCI **takes wlan0 down** — run this
+   from Ethernet or a serial console, never over the USB radio's link. The
+   radio disappears and re-enumerates after `bind`; if `wlan0` does not come
+   back on its own, re-run the network init (`/etc/init.d/S40network`
+   restart) rather than poking WiFi config.
+   Rebind re-runs `Titania3_series_start_ehc()` (USBC reset handshake, CA
+   calibration, squelch/eye init) and then re-enumerates the radio. Expected
+   dmesg on HS success: `Sstar-ehci-1 H.W init`, `[USB] init squelch level 0x..`
+   and a `new high-speed USB device number N` line. Re-running steps 1-4
+   afterwards gives the post-init register state. Observed on hardware: the
+   device re-enumerated at full speed again.
+6. **True analog power cycle** — only a full board re-power removes power
+   from the UTMI PHY and the module (VBUS is hardwired; `power-enable-pad`
+   is not driven by Linux). Note this is distinct from the already-tested
+   input-supply-*capacity* change, which alters headroom but was recorded as
+   not improving negotiation. Power-cycle, then repeat steps 1-5 and compare:
+   identical FS results across cold boot, re-probe and replug indicate the
+   condition is stable (analog/hardware), while an occasional HS success
+   would point at marginal timing.

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/init.d/S40network

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+start() {
+    echo "Starting network..."
+    ifup lo
+    modprobe 8812eu rtw_tx_pwr_by_rate=0 rtw_tx_pwr_lmt_enable=0
+}
+
+stop() {
+    ifdown lo
+    ifdown -f wlan0
+    ifdown -f eth0
+}
+
+case "$1" in
+    start|stop) "$1" ;;
+    restart|reload) stop; start ;;
+    *) echo "Usage: $0 {start|stop|restart|reload}"; exit 1 ;;
+esac

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/init.d/S41mgmt-net

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+case "$1" in
+    start)
+        ifdown eth0 2>/dev/null || true
+        ifup eth0
+        sleep 5
+        /usr/bin/mgmt-net --force
+
+        if [ -r /run/mgmt-netd.pid ] &&
+           kill -0 "$(cat /run/mgmt-netd.pid)" 2>/dev/null; then
+            exit 0
+        fi
+
+        (
+            while :; do
+                /usr/bin/mgmt-net
+                sleep 2
+            done
+        ) &
+        echo $! >/run/mgmt-netd.pid
+        ;;
+
+    stop)
+        [ -r /run/mgmt-netd.pid ] &&
+          kill "$(cat /run/mgmt-netd.pid)" 2>/dev/null || true
+        rm -f /run/mgmt-netd.pid /run/mgmt-net.state
+        ;;
+esac

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/init.d/S97link-monitor

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+case "$1" in
+    start)
+        pidof wfb_tx wfb_rx wfb_tun wifilink >/dev/null && exit 0
+        pidof msposd >/dev/null && exit 0
+
+        size=$(curl -s localhost/api/v1/config.json | \
+          jsonfilter -qe "@.video0.size")
+        size="${size:-1280x720}"
+
+        msposd \
+          -b 115200 \
+          -c 8 \
+          -c 6 \
+          -p 500 \
+          -w 1000 \
+          --mspvtx \
+          -r 20 \
+          -m /dev/ttyS2 \
+          -o 127.0.0.1:14551 \
+          -z "$size" \
+          >/tmp/msposd-management.log 2>&1 &
+        ;;
+
+    *)
+        exit 0
+        ;;
+esac

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/init.d/wifibroadcast

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+case "$1" in
+	start)
+		echo "Starting wifibroadcast..."
+		wifibroadcast start
+		;;
+
+	stop)
+		echo "Stopping wifibroadcast..."
+		wifibroadcast stop
+		;;
+
+	*)
+		echo "Usage: $0 {start|stop}"
+		exit 1
+		;;
+esac

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/majestic.yaml

@@ -0,0 +1,81 @@
+system:
+  webPort: 80
+  httpsPort: 443
+  logLevel: info
+isp:
+  antiFlicker: disabled
+  sensorConfig: /etc/sensors/imx415_infinity6e.bin
+  exposure: 5
+  iqServer: false
+image:
+  mirror: false
+  flip: false
+  rotate: 0
+  contrast: 50
+  hue: 50
+  saturation: 50
+  luminance: 50
+video0:
+  enabled: true
+  codec: h264
+  fps: 60
+  bitrate: 4096
+  rcMode: cbr
+  gopSize: 0.2
+  size: 1280x720
+  profile: main
+  sliceUnits: 0
+video1:
+  enabled: false
+  codec: h264
+  size: 704x576
+  fps: 15
+jpeg:
+  enabled: true
+  qfactor: 50
+  fps: 5
+osd:
+  enabled: false
+  font: /usr/share/fonts/truetype/UbuntuMono-Regular.ttf
+  template: '%d.%m.%Y %H:%M:%S'
+  posX: 16
+  posY: 16
+audio:
+  enabled: false
+  volume: 30
+  srate: 8000
+  codec: opus
+  outputEnabled: false
+  outputVolume: 30
+rtsp:
+  enabled: false
+  port: 554
+nightMode:
+  colorToGray: true
+  irCutSingleInvert: false
+  lightMonitor: false
+  lightSensorInvert: false
+motionDetect:
+  enabled: false
+  visualize: false
+  debug: false
+records:
+  enabled: false
+  path: /mnt/mmcblk0p1/%F
+  split: 1
+  maxUsage: 95
+  notime: true
+outgoing:
+  enabled: true
+  naluSize: 1400
+  wfb: true
+  server:
+  substream: false
+watchdog:
+  enabled: true
+  timeout: 300
+hls:
+  enabled: false
+fpv:
+  enabled: true
+  noiseLevel: 1

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/network/interfaces.d/eth0

@@ -0,0 +1,6 @@
+iface eth0 inet static
+    hwaddress ether $(fw_printenv -n ethaddr || echo 00:00:23:34:45:66)
+    address 192.168.0.10
+    netmask 255.255.255.0
+    gateway 192.168.0.1
+    post-up echo "nameserver 1.1.1.1" > /etc/resolv.conf

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/network/interfaces.d/wlan0

@@ -0,0 +1,10 @@
+auto wlan0
+iface wlan0 inet static
+    address 192.168.0.10
+    netmask 255.255.255.0
+    gateway 192.168.0.1
+    pre-up wpa_passphrase "$(fw_printenv -n wlanssid)" "$(fw_printenv -n wlanpass)" > /tmp/wpa_supplicant.conf
+    pre-up sed -i 's/#psk.*/scan_ssid=1/g' /tmp/wpa_supplicant.conf
+    pre-up wpa_supplicant -B -i wlan0 -D nl80211,wext -c /tmp/wpa_supplicant.conf
+    post-up echo "nameserver 1.1.1.1" > /etc/resolv.conf
+    post-down killall -q wpa_supplicant

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/etc/wfb.yaml

@@ -0,0 +1,17 @@
+wireless:
+  txpower: 10
+  channel: 161
+  width: 20
+  mlink: 1500
+broadcast:
+  mcs_index: 2
+  tun_index: 1
+  fec_k: 8
+  fec_n: 12
+  stbc: 0
+  ldpc: 0
+  link_id: 7669206
+telemetry:
+  router: msposd
+  serial: ttyS2
+  osd_fps: 20

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/usr/bin/channels.sh

@@ -0,0 +1,25 @@
+#!/bin/sh
+
+CHANNEL="${1:-}"
+VALUE="${2:-}"
+
+# CH6 is the GX12 WFB knob. Betaflight exposes it as 1000..2000 PWM.
+[ "$CHANNEL" = "6" ] || exit 0
+
+case "$VALUE" in
+  ''|*[!0-9]*) exit 2 ;;
+esac
+
+# First 5% is an explicit OFF detent. Above it WFB starts at 5% and the
+# remaining travel maps continuously to 100%. This is a UI-range guard, not a
+# regulatory EIRP cap.
+if [ "$VALUE" -le 1050 ]; then
+  rm -f /run/wfb-power
+  logger -t channels "CH6=$VALUE -> management"
+  exec /usr/bin/link-mode management
+fi
+
+POWER=$((5 + (VALUE - 1051) * 95 / 949))
+[ "$POWER" -gt 100 ] && POWER=100
+logger -t channels "CH6=$VALUE -> WFB txpower=$POWER"
+exec /usr/bin/wfb-power "$POWER"

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/usr/bin/link-mode

@@ -0,0 +1,65 @@
+#!/bin/sh
+
+LOCK=/run/link-mode.lock
+STATE=/run/link-mode.state
+
+log() {
+    logger -t link-mode "$*"
+}
+
+if ! mkdir "$LOCK" 2>/dev/null; then
+    log "another transition is in progress; ignoring ${1:-}"
+    exit 0
+fi
+
+cleanup() {
+    rmdir "$LOCK" 2>/dev/null || true
+}
+
+trap cleanup EXIT HUP INT TERM
+
+wfb_active() {
+    pidof wfb_tx wfb_rx wfb_tun wifilink >/dev/null
+}
+
+case "${1:-}" in
+    preflight)
+        if wfb_active; then
+            echo wfb >"$STATE"
+            exit 0
+        fi
+
+        log "management -> WFB"
+        ifdown wlan0 >/dev/null 2>&1 || true
+        killall -q wpa_supplicant 2>/dev/null || true
+        ip link set wlan0 up
+
+        if /usr/bin/wifibroadcast start && wfb_active; then
+            echo wfb >"$STATE"
+            log "WFB is active"
+            exit 0
+        fi
+
+        log "WFB start failed"
+        exit 1
+        ;;
+
+    management)
+        if wfb_active; then
+            log "WFB -> management"
+            /usr/bin/wifibroadcast stop
+            killall -q wifilink 2>/dev/null || true
+        fi
+
+        /usr/bin/mgmt-net --force
+        echo management >"$STATE"
+        log "management path restored"
+        /etc/init.d/S97link-monitor start
+        exit 0
+        ;;
+
+    *)
+        echo "Usage: $0 {preflight|management}" >&2
+        exit 2
+        ;;
+esac

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/usr/bin/mgmt-net

@@ -0,0 +1,59 @@
+#!/bin/sh
+
+STATE=/run/mgmt-net.state
+LINK_LOCK=/run/link-mode.lock
+FORCE="${1:-}"
+
+[ -e "$LINK_LOCK" ] && [ "$FORCE" != "--force" ] && exit 0
+
+eth_standby() {
+    ifdown eth0 2>/dev/null || true
+    ifup eth0
+    ip addr flush dev eth0
+}
+
+carrier=0
+if [ -r /sys/class/net/eth0/carrier ]; then
+    carrier=$(cat /sys/class/net/eth0/carrier 2>/dev/null || echo 0)
+fi
+
+if pidof wfb_tx wfb_rx wfb_tun wifilink >/dev/null; then
+    wfb_active=1
+else
+    wfb_active=0
+fi
+
+if [ "$carrier" = "1" ]; then
+    wanted=ethernet
+elif [ "$wfb_active" = "1" ]; then
+    wanted=wfb
+else
+    wanted=wifi
+fi
+
+current=$(cat "$STATE" 2>/dev/null || true)
+[ "$wanted" = "$current" ] && [ "$FORCE" != "--force" ] && exit 0
+
+case "$wanted" in
+    ethernet)
+        [ "$wfb_active" = "0" ] && ifdown wlan0 2>/dev/null || true
+        ifdown eth0 2>/dev/null || true
+        ifup eth0
+        ;;
+
+    wifi)
+        eth_standby
+        ifdown wlan0 2>/dev/null || true
+        ip link set wlan0 down
+        iw dev wlan0 set type managed
+        ip link set wlan0 up
+        ifup wlan0
+        ;;
+
+    wfb)
+        eth_standby
+        ;;
+esac
+
+echo "$wanted" >"$STATE"
+logger -t mgmt-net "active path: $wanted"

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/usr/bin/wfb-power

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+POWER="${1:-}"
+LOCK=/run/wfb-power.lock
+STATE=/run/wfb-power
+
+case "$POWER" in
+  ''|*[!0-9]*) exit 2 ;;
+esac
+[ "$POWER" -ge 5 ] && [ "$POWER" -le 100 ] || exit 2
+
+# The runtime state is tmpfs. Do not rewrite /etc/wfb.yaml while a knob moves.
+printf '%s\n' "$POWER" >"$STATE"
+
+if ! mkdir "$LOCK" 2>/dev/null; then
+  exit 0
+fi
+trap 'rmdir "$LOCK" 2>/dev/null || true' EXIT HUP INT TERM
+
+if pidof wfb_tx wfb_rx wfb_tun wifilink >/dev/null; then
+  # RTL8812EU accepts 0..3150 mBm driver units; map the user-facing 0..100
+  # scalar over that complete hardware-supported range.
+  iw wlan0 set txpower fixed $((POWER * 3150 / 100))
+  logger -t wfb-power "runtime txpower=$POWER"
+  exit 0
+fi
+
+logger -t wfb-power "txpower=$POWER -> WFB preflight"
+/usr/bin/link-mode preflight

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/usr/bin/wifibroadcast

@@ -0,0 +1,202 @@
+#!/bin/sh
+wfb_key=/etc/drone.key
+wfb_cfg=/etc/wfb.yaml
+wfb_dev=wlan0
+
+echo_log() {
+	echo "$1" | logger -s -t wifibroadcast
+}
+
+wfb_yaml() {
+	if [ -e "$1" ]; then
+		while IFS=: read -r key value; do
+			key=$(eval echo "$key")
+			value=$(eval echo "$value")
+			export "$key=$value"
+		done < "$1"
+	fi
+}
+
+load_config() {
+	wfb_yaml /rom"$wfb_cfg"
+	wfb_yaml "$wfb_cfg"
+	if [ -r /run/wfb-power ]; then
+		runtime_txpower=$(cat /run/wfb-power)
+		case "$runtime_txpower" in
+			[5-9]|[1-9][0-9]|100) txpower="$runtime_txpower" ;;
+		esac
+	fi
+	[ ! -e "$wfb_key" ] && wfb_key=/rom"$wfb_key"
+}
+
+load_modules() {
+	for card in $(lsusb | awk '{print $6}' | uniq); do
+		case "$card" in
+			"0bda:8812" | "0bda:881a" | "0b05:17d2" | "2357:0101" | "2604:0012")
+				driver=88XXau
+				;;
+
+			"0bda:a81a")
+				driver=8812eu
+				;;
+
+			"0bda:f72b" | "0bda:b733")
+				driver=8733bu
+				;;
+		esac
+	done
+
+	if [ -z "$driver" ]; then
+		echo_log "Wireless module not detected!"
+		exit 1
+	fi
+
+	echo_log "Detected driver: $driver"
+	[ -e /sys/class/net/"$wfb_dev" ] && return
+	sleep 1
+
+	if [ "$driver" != "88XXau" ]; then
+		opt1="rtw_tx_pwr_by_rate=0"
+		opt2="rtw_tx_pwr_lmt_enable=0"
+	fi
+
+	modprobe "$driver" "$opt1" "$opt2"
+	sleep 3
+
+	if ! ifconfig "$wfb_dev" up; then
+		echo_log "Wireless driver not found!"
+		exit 1
+	fi
+}
+
+load_mlink() {
+	ifconfig "$wfb_dev" mtu "$mlink"
+
+	nalu=$((mlink - 100))
+	if [ "$(cli -g .outgoing.naluSize)" != "$nalu" ]; then
+		cli -s .outgoing.naluSize "$nalu"
+		killall -1 majestic
+	fi
+}
+
+load_interface() {
+	iw "$wfb_dev" set monitor none
+
+	[ "$width" = "40" ] && wfb_width=HT40+ || wfb_width=HT20
+	iw "$wfb_dev" set channel "$channel" "$wfb_width"
+	iw reg set 00
+
+	[ "$driver" = "88XXau" ] && wfb_power=$((txpower * -100)) || wfb_power=$((txpower * 3150 / 100))
+	iw "$wfb_dev" set txpower fixed "$wfb_power"
+}
+
+load_wfb() {
+	wfb_rx -K "$wfb_key" -i "$link_id" -p "$1" -u "$3" "$wfb_dev" &> /dev/null &
+	wfb_tx -K "$wfb_key" -M "$tun_index" -B "$width" -k "$fec_k" -n "$fec_n" \
+		-S "$stbc" -L "$ldpc" -i "$link_id" -p "$2" -u "$4" "$wfb_dev" &> /dev/null &
+}
+
+start_broadcast() {
+	echo_log "Starting wfb_tx"
+	wfb_tx -K "$wfb_key" -M "$mcs_index" -B "$width" -k "$fec_k" -n "$fec_n" -U rtp_local \
+		-S "$stbc" -L "$ldpc" -i "$link_id" -C 8000 "$wfb_dev" &> /dev/null &
+}
+
+start_tunnel() {
+	echo_log "Starting wfb_tun"
+	load_wfb 160 32 5800 5801
+	wfb_tun -a 10.5.0.10/24 > /dev/null &
+}
+
+start_telemetry() {
+	chipset=$(ipcinfo -c)
+	[ "$chipset" = "ssc33x" ] && devmem 0x1F207890 16 0x8
+
+	port_rx=14550
+	port_tx=14551
+
+	echo_log "Starting $router"
+	load_wfb 144 16 "$port_rx" "$port_tx"
+
+	if [ "$router" = "mavfwd" ]; then
+		mavfwd -b 115200 -c 8 -p 100 -a 15 -t -m /dev/"$serial" \
+			-o 127.0.0.1:"$port_tx" -i 127.0.0.1:"$port_rx" > /dev/null &
+	else
+		if [ "$router" = "msposd" ]; then
+			size=$(curl -s localhost/api/v1/config.json | jsonfilter -qe "@.video0.size")
+		fi
+        if ! pidof msposd >/dev/null; then
+		msposd -b 115200 -c 8 -c 6 -p 500 -w 1000 --mspvtx -r "$osd_fps" -m /dev/"$serial" \
+			-o 127.0.0.1:"$port_tx" -z "$size" > /dev/null &
+        fi
+	fi
+}
+
+video_settings() {
+	sensor=$(ipcinfo -s)
+	cli -s .isp.sensorConfig /etc/sensors/"$sensor"_infinity6e.bin
+	cli -s .isp.exposure 5
+	cli -s .video0.fps 60
+	cli -s .video0.size 1280x720
+	cli -s .video0.bitrate 4096
+	cli -s .video0.codec h264
+	cli -s .video0.rcMode cbr
+	cli -s .video0.gopSize 0.2
+	cli -s .outgoing.enabled true
+	cli -s .outgoing.wfb true
+	cli -s .fpv.enabled true
+	cli -s .fpv.noiseLevel 1
+	cli -s .records.split 1
+	cli -s .records.notime true
+}
+
+start() {
+	load_config
+	load_modules
+	load_mlink
+	load_interface
+
+	if [ ! -e /etc/system.ok ]; then
+		video_settings
+		touch /etc/system.ok
+#		killall -1 majestic
+		reboot
+	fi
+
+	stop
+	start_broadcast
+	start_tunnel
+	start_telemetry
+	wifilink 20 &
+}
+
+stop() {
+	for process in wfb_rx wfb_tx wfb_tun mavfwd; do
+		if [ -n "$(pidof $process)" ]; then
+			echo_log "Stopping $process"
+			killall -q "$process"
+		fi
+	done
+}
+
+case "$1" in
+	start|stop)
+		$1
+		;;
+
+	reset)
+		cp -f /rom"$wfb_cfg" "$wfb_cfg"
+		cp -f /rom/etc/majestic.yaml /etc/majestic.yaml
+		video_settings
+		;;
+
+	cli)
+		shift
+		yaml-cli -i "$wfb_cfg" "$@"
+		;;
+
+	*)
+		echo "Usage: $0 {start|stop|reset|cli}"
+		exit 1
+		;;
+esac

devices/ssc338q_fpv_openipc-urllc-aio/general/overlay/usr/share/openipc/customizer.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Set custom upgrade url
+# Set the reproducible Piksar HiLink firmware release channel.
-fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/ssc338q_fpv_openipc-urllc-aio-nor.tgz'
+fw_setenv upgrade 'https://git.piksar.eu/piotr/openipc-builder/releases/download/latest/ssc338q_fpv_openipc-urllc-aio-nor.tgz'
 
 exit 0

devices/ssc338q_fpv_openipc-urllc-aio/general/scripts/excludes/ssc338q_fpv.list

@@ -14,3 +14,8 @@
 /lib/modules/4.9.84/sigmastar/sensor_os04c10_mipi.ko
 /lib/modules/4.9.84/sigmastar/sensor_sc501ai_mipi.ko
 /lib/modules/4.9.84/sigmastar/sensor_sc8235_mipi.ko
+#
+# HiLink's radio is USB 0bda:a81a and loads 8812eu. The legacy 88XXau
+# module targets other adapters and is 1.4 MiB, which exceeds the 8 MiB
+# rootfs budget without serving this fixed hardware profile.
+/lib/modules/4.9.84/extra/88XXau.ko

package/msposd/0001-wifilink-mspvtx-read-only.patch

@@ -0,0 +1,455 @@
+diff --git a/osd.c b/osd.c
+index a8b756e..7e5ca2a 100644
+--- a/osd.c
++++ b/osd.c
+@@ -959,48 +959,37 @@ static void rx_msp_callback(msp_msg_t *msp_message) {
+ 		break;
+ 	}
+ 
+-	case MSP_GET_VTX_CONFIG: {
+-		if (vtxInitDone) {
+-			mspVtxConfigStruct *in_mspVtxConfigStruct = (mspVtxConfigStruct *)msp_message->payload;
+-			uint16_t frequency =
+-				(in_mspVtxConfigStruct->freqMSB << 8) | in_mspVtxConfigStruct->freqLSB;
++	case MSP_SET_VTX_CONFIG:
++		// FC-side desired settings are read-only for this VTX. The next
++		// MSP_VTX_CONFIG reply will re-advertise the actual WFB runtime.
++		break;
+ 
+-			double current_frequency =
+-				read_current_freq_from_interface(read_setting("/etc/wfb.conf", "wlan"));
++	case MSP_GET_VTX_CONFIG: {
++		if (msp_message->size < 15) {
++			break;
++		}
+ 
+-			if (verbose)
+-				printf("mspVTX Band: %i, Channel: %i, wanted Frequency: %u, set "
+-					   "Frequency: %.0f\n",
+-					in_mspVtxConfigStruct->band, in_mspVtxConfigStruct->channel, frequency,
+-					current_frequency);
+-
+-			if (frequency != (uint16_t)current_frequency) {
+-				int channel = 0;
+-				for (int i = 0; i < MAX_ENTRIES; i++) {
+-					if (fc_list[i].frequency == frequency)
+-						channel = fc_list[i].channel;
+-				}
+-				if (channel > 0) {
+-					if (verbose)
+-						printf("mspVTX executing channel change to channel "
+-							   "%d\n",
+-							channel);
+-
+-					set_frequency(read_setting("/etc/wfb.conf", "wlan"), channel);
+-
+-					// store new channel to wfb.conf
+-					char cha_str[32];
+-					sprintf(cha_str, "%i", channel);
+-					write_setting("/etc/wfb.conf", "channel", cha_str);
+-				} else {
+-					printf("Never change to channel 0, we should not reach "
+-						   "here, check "
+-						   "vtx table in your fc\n");
+-				}
+-			}
++		mspVtxConfigStruct *fc_vtx = (mspVtxConfigStruct *)msp_message->payload;
++		bool table_ready = fc_vtx->vtxTableAvailable &&
++			fc_vtx->bands == BAND_COUNT &&
++			fc_vtx->channels == CHANNEL_COUNT &&
++			fc_vtx->powerLevels == NUM_POWER_LEVELS;
++
++		// This is an actual FC reply to our periodic MSP_VTX_CONFIG request.
++		// Keep publishing the true local WFB configuration. If the FC reset or
++		// discarded its table, rebuild it here instead of depending on boot order.
++		if (table_ready) {
++			msp_send_vtx_runtime_config(serial_fd);
+ 		} else {
+-			if (verbose)
+-				printf("vtxInitDone not finished, should never happen\n");
++			msp_set_vtx_config(serial_fd);
++		}
++
++		if (verbose) {
++			uint16_t fc_frequency =
++				(fc_vtx->freqMSB << 8) | fc_vtx->freqLSB;
++			printf("mspVTX: FC %u MHz, table %u/%u/%u; local WFB %d MHz\n",
++				fc_frequency, fc_vtx->bands, fc_vtx->channels, fc_vtx->powerLevels,
++				read_wfb_frequency());
+ 		}
+ 		break;
+ 	}
+diff --git a/osd/msp/msp.c b/osd/msp/msp.c
+index b1a538c..d834780 100644
+--- a/osd/msp/msp.c
++++ b/osd/msp/msp.c
+@@ -5,6 +5,7 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#include <termios.h>
+ #include <unistd.h>
+ 
+ extern bool verbose;
+@@ -33,12 +34,11 @@ uint16_t channelFreqTable[FREQ_TABLE_SIZE] = {
+ 	5925 // WLAN CHANNEL: 132, 140, 144, 153, 161, 169, 177, 185
+ };
+ 
+-uint8_t saPowerLevelsLut[NUM_POWER_LEVELS] = {20, 25, 30, 35, 45, 50, 55, 58};
++uint8_t saPowerLevelsLut[NUM_POWER_LEVELS] = {0, 10, 25, 40, 55, 70, 85, 100};
+ 
+-uint8_t saPowerLevelsLabel[NUM_POWER_LEVELS * POWER_LEVEL_LABEL_LENGTH] = {'2', '0', ' ', '2', '5',
+-	' ', '3', '0', ' ', '3', '5', ' ', '4', '5', ' ', '5', '0', ' ', '5', '5', ' ', '5', '8', ' '};
+-
+-int frequency = 0;
++uint8_t saPowerLevelsLabel[NUM_POWER_LEVELS * POWER_LEVEL_LABEL_LENGTH] = {
++	'0', ' ', ' ', '1', '0', ' ', '2', '5', ' ', '4', '0', ' ',
++	'5', '5', ' ', '7', '0', ' ', '8', '5', ' ', '1', '0', '0'};
+ 
+ uint16_t msp_data_from_msg(uint8_t message_buffer[], msp_msg_t *msg) {
+ 	// return size
+@@ -46,50 +46,103 @@ uint16_t msp_data_from_msg(uint8_t message_buffer[], msp_msg_t *msg) {
+ 	return msg->size + 6;
+ }
+ 
+-void wipeVtxTable(int serial_fd, int band, int channel) {
+-
+-	// lets first wipe all
+-	uint8_t payload[15];
+-	payload[0] = 0;	 // idx LSB
+-	payload[1] = 0;	 // idx MSB
+-	payload[2] = 0;	 // power
+-	payload[3] = 0;	 // pitmode
+-	payload[4] = 0;	 // lowPowerDisarm
+-	payload[5] = 0;	 // pitModeFreq LSB
+-	payload[6] = 0;	 // pitModeFreq MSB
+-	payload[7] = 0;	 // newBand - WLAN Channel
+-	payload[8] = 0;	 // newChannel - 161
+-	payload[9] = 0;	 // newFreq  LSB
+-	payload[10] = 0; // newFreq  MSB
+-	payload[11] = 0; // newBandCount
+-	payload[12] = 0; // newChannelCount
+-	payload[13] = 0; // newPowerCount
+-	payload[14] = 1; // vtxtable should be cleared
++static void write_msp_packet(int serial_fd, const uint8_t *buffer, size_t size) {
++	ssize_t written = write(serial_fd, buffer, size);
++	if (written != (ssize_t)size) {
++		fprintf(stderr, "mspVTX: short serial write (%zd/%zu)\n", written, size);
++		return;
++	}
+ 
+-	uint8_t buffer[256];
++	// Betaflight's MSP parser is also carrying DisplayPort traffic on this
++	// UART. Drain and pace table frames so a cold boot cannot overrun its
++	// receive path before it has processed the preceding configuration frame.
++	tcdrain(serial_fd);
++	usleep(20 * 1000);
++}
+ 
+-	construct_msp_command(buffer, MSP_SET_VTX_CONFIG, payload, sizeof(payload), MSP_OUTBOUND);
+-	write(serial_fd, &buffer, sizeof(buffer));
+-
+-	// now prepare the table
+-	payload[0] = 0;					// idx LSB
+-	payload[1] = 0;					// idx MSB
+-	payload[2] = 7;					// 55, default wfb-ng
+-	payload[3] = 0;					// pitmode
+-	payload[4] = 0;					// lowPowerDisarm
+-	payload[5] = 0;					// pitModeFreq LSB
+-	payload[6] = 0;					// pitModeFreq MSB
+-	payload[7] = band;				// newBand - WLAN Channel
+-	payload[8] = channel;			// newChannel - 161
+-	payload[9] = 0;					// newFreq  LSB
+-	payload[10] = 0;				// newFreq  MSB
+-	payload[11] = BAND_COUNT;		// newBandCount
+-	payload[12] = CHANNEL_COUNT;	// newChannelCount
+-	payload[13] = NUM_POWER_LEVELS; // newPowerCount
+-	payload[14] = 0;				// vtxtable should be cleared
++static bool wfb_runtime_active(void) {
++	return system("pidof wfb_tx wfb_rx wfb_tun wifilink >/dev/null 2>&1") == 0;
++}
++
++static uint8_t power_index_for_txpower(int txpower) {
++	uint8_t best = 0;
++	int smallest_delta = 101;
++
++	for (uint8_t i = 0; i < NUM_POWER_LEVELS; i++) {
++		int delta = abs(txpower - saPowerLevelsLut[i]);
++		if (delta < smallest_delta) {
++			best = i;
++			smallest_delta = delta;
++		}
++	}
++
++	return best + 1;
++}
++
++static int get_wfb_vtx_config(int *band, int *channel, int *configured_frequency,
++	uint8_t *power_index, bool *pit_mode) {
++	*configured_frequency = read_wfb_frequency();
++	if (*configured_frequency < 0) {
++		fprintf(stderr, "mspVTX: cannot read /etc/wfb.yaml channel\n");
++		return -1;
++	}
++
++	int txpower = read_wfb_txpower();
++	if (txpower < 0) {
++		fprintf(stderr, "mspVTX: cannot read /etc/wfb.yaml txpower\n");
++		return -1;
++	}
++	bool active = wfb_runtime_active();
++	*pit_mode = !active;
++	if (!active) {
++		txpower = 0;
++	}
++	*power_index = power_index_for_txpower(txpower);
++
++	*band = 1;
++	*channel = 1;
++	for (int index = 0; index < FREQ_TABLE_SIZE; index++) {
++		if (channelFreqTable[index] == *configured_frequency) {
++			*band = index / CHANNEL_COUNT + 1;
++			*channel = index % CHANNEL_COUNT + 1;
++			return 0;
++		}
++	}
++
++	fprintf(stderr, "mspVTX: %d MHz is absent from the VTX table\n", *configured_frequency);
++	return -1;
++}
++
++static void send_vtx_config(int serial_fd, int band, int channel, int configured_frequency,
++	uint8_t power_index, bool pit_mode, bool clear_table) {
++	uint8_t payload[15] = {
++		configured_frequency & 0xFF,
++		(configured_frequency >> 8) & 0xFF,
++		power_index, // nearest configured 0..100 WFB txpower table entry
++		pit_mode, // management standby is represented as VTX pit mode
++		0, // low power when disarmed
++		0, 0, // pit frequency
++		band,
++		channel,
++		configured_frequency & 0xFF,
++		(configured_frequency >> 8) & 0xFF,
++		BAND_COUNT,
++		CHANNEL_COUNT,
++		NUM_POWER_LEVELS,
++		clear_table ? 1 : 0,
++	};
++	uint8_t buffer[21];
+ 
+ 	construct_msp_command(buffer, MSP_SET_VTX_CONFIG, payload, sizeof(payload), MSP_OUTBOUND);
+-	write(serial_fd, &buffer, sizeof(buffer));
++	write_msp_packet(serial_fd, buffer, sizeof(payload) + 6);
++}
++
++static void wipeVtxTable(int serial_fd, int band, int channel, int configured_frequency,
++	uint8_t power_index, bool pit_mode) {
++	// First tell Betaflight to discard any stale table, then publish the
++	// configured WFB frequency and the table dimensions.
++	send_vtx_config(serial_fd, band, channel, configured_frequency, power_index, pit_mode, true);
++	send_vtx_config(serial_fd, band, channel, configured_frequency, power_index, pit_mode, false);
+ }
+ 
+ void setVtxTableBand(int serial_fd, uint8_t band) {
+@@ -119,7 +172,7 @@ void setVtxTableBand(int serial_fd, uint8_t band) {
+ 	}
+ 
+ 	construct_msp_command(buffer, MSP_SET_VTXTABLE_BAND, payload2, sizeof(payload2), MSP_OUTBOUND);
+-	write(serial_fd, &buffer, sizeof(buffer));
++	write_msp_packet(serial_fd, buffer, sizeof(payload2) + 6);
+ }
+ 
+ void setVtxTablePowerLevel(int serial_fd, uint8_t idx) {
+@@ -139,31 +192,26 @@ void setVtxTablePowerLevel(int serial_fd, uint8_t idx) {
+ 
+ 	construct_msp_command(
+ 		buffer, MSP_SET_VTXTABLE_POWERLEVEL, payload2, sizeof(payload2), MSP_OUTBOUND);
+-	write(serial_fd, &buffer, sizeof(buffer));
++	write_msp_packet(serial_fd, buffer, sizeof(payload2) + 6);
+ }
+ 
+ void msp_set_vtx_config(int serial_fd) {
++	int band;
++	int channel;
++	int configured_frequency;
++	uint8_t power_index;
++	bool pit_mode;
++
++	if (get_wfb_vtx_config(&band, &channel, &configured_frequency, &power_index, &pit_mode) != 0) {
++		return;
++	}
+ 
+-	// mspVTX read current frequency setting
+-	query_interface_for_available_frequencies();
+-
+-	frequency = read_current_freq_from_interface(read_setting("/etc/wfb.conf", "wlan"));
+-
+-	int band = 6;
+-	int channel = 3;
+-	for (int index = 0; index < FREQ_TABLE_SIZE; index++) {
+-		if (channelFreqTable[index] == frequency) {
+-			// Determine band and channel using division and modulo
+-			band = index / 8 + 1;	   // Which band (integer division)
+-			channel = (index % 8) + 1; // Channel within the band (modulo)
+-
+-			if (verbose)
+-				printf("Frequency %d found in band %i, channel %d\n", frequency, band, channel);
+-			break; // Exit after finding the frequency
+-		}
++	if (verbose) {
++		printf("mspVTX table: %d MHz, band %d, channel %d\n",
++			configured_frequency, band, channel);
+ 	}
+ 
+-	wipeVtxTable(serial_fd, band, channel);
++	wipeVtxTable(serial_fd, band, channel, configured_frequency, power_index, pit_mode);
+ 
+ 	for (int i = 1; i <= BAND_COUNT; i++) {
+ 		setVtxTableBand(serial_fd, i);
+@@ -174,6 +222,20 @@ void msp_set_vtx_config(int serial_fd) {
+ 	vtxInitDone = true;
+ }
+ 
++void msp_send_vtx_runtime_config(int serial_fd) {
++	int band;
++	int channel;
++	int configured_frequency;
++	uint8_t power_index;
++	bool pit_mode;
++
++	if (get_wfb_vtx_config(&band, &channel, &configured_frequency, &power_index, &pit_mode) != 0) {
++		return;
++	}
++
++	send_vtx_config(serial_fd, band, channel, configured_frequency, power_index, pit_mode, false);
++}
++
+ msp_error_e construct_msp_command(uint8_t message_buffer[], uint8_t command, uint8_t payload[],
+ 	uint8_t size, msp_direction_e direction) {
+ 	uint8_t checksum;
+diff --git a/osd/msp/msp.h b/osd/msp/msp.h
+index 3e60a31..1fe1c28 100644
+--- a/osd/msp/msp.h
++++ b/osd/msp/msp.h
+@@ -40,10 +40,10 @@
+ 	  // wfb-ng list
+ 
+ #define CHANNEL_COUNT 8
+-#define BAND_COUNT 8
++#define BAND_COUNT 7
+ #define IS_FACTORY_BAND 0
+-#define FREQ_TABLE_SIZE 64
+-#define FREQ_LABEL_SIZE 64
++#define FREQ_TABLE_SIZE 56
++#define FREQ_LABEL_SIZE 56
+ 
+ #define MSP_REBOOT 68 // in message reboot settings
+ 
+@@ -83,3 +83,5 @@ msp_error_e construct_msp_command(uint8_t message_buffer[], uint8_t command, uin
+ 	uint8_t size, msp_direction_e direction);
+ msp_error_e msp_process_data(msp_state_t *msp_state, uint8_t dat);
+ void msp_set_vtx_config(int serial_fd);
++// Advertise the actual local WFB configuration without resetting the FC table.
++void msp_send_vtx_runtime_config(int serial_fd);
+diff --git a/osd/util/interface.c b/osd/util/interface.c
+index 089fdc2..a783431 100644
+--- a/osd/util/interface.c
++++ b/osd/util/interface.c
+@@ -153,3 +153,81 @@ void set_frequency(char *interface, int channel) {
+ 		printf("Failed to set channel on %s\n", interface);
+ 	}
+ }
++
++int read_wfb_frequency(void) {
++	FILE *fp = fopen("/etc/wfb.yaml", "r");
++	char buffer[256];
++	int in_wireless = 0;
++	int channel = -1;
++
++	if (fp == NULL) {
++		return -1;
++	}
++
++	while (fgets(buffer, sizeof(buffer), fp) != NULL) {
++		if (strncmp(buffer, "wireless:", 9) == 0) {
++			in_wireless = 1;
++			continue;
++		}
++
++		if (in_wireless && buffer[0] != ' ' && buffer[0] != '	' &&
++			buffer[0] != '\n') {
++			break;
++		}
++
++		if (in_wireless && sscanf(buffer, " channel: %d", &channel) == 1) {
++			break;
++		}
++	}
++
++	fclose(fp);
++
++	if (channel >= 1 && channel <= 14) {
++		return 2407 + channel * 5;
++	}
++	if (channel > 14 && channel <= 196) {
++		return 5000 + channel * 5;
++	}
++
++	return -1;
++}
++
++int read_wfb_txpower(void) {
++	FILE *fp = fopen("/run/wfb-power", "r");
++	int txpower = -1;
++
++	// CH6 knob state wins while WFB is active; it is intentionally kept in
++	// tmpfs so power changes do not wear the overlay flash.
++	if (fp != NULL) {
++		if (fscanf(fp, "%d", &txpower) == 1 && txpower >= 0 && txpower <= 100) {
++			fclose(fp);
++			return txpower;
++		}
++		fclose(fp);
++	}
++
++	fp = fopen("/etc/wfb.yaml", "r");
++	char buffer[256];
++	int in_wireless = 0;
++
++	if (fp == NULL) {
++		return -1;
++	}
++
++	while (fgets(buffer, sizeof(buffer), fp) != NULL) {
++		if (strncmp(buffer, "wireless:", 9) == 0) {
++			in_wireless = 1;
++			continue;
++		}
++		if (in_wireless && buffer[0] != ' ' && buffer[0] != '	' &&
++			buffer[0] != '\n') {
++			break;
++		}
++		if (in_wireless && sscanf(buffer, " txpower: %d", &txpower) == 1) {
++			break;
++		}
++	}
++
++	fclose(fp);
++	return txpower >= 0 && txpower <= 100 ? txpower : -1;
++}
+diff --git a/osd/util/interface.h b/osd/util/interface.h
+index 983971d..854c9e7 100644
+--- a/osd/util/interface.h
++++ b/osd/util/interface.h
+@@ -22,3 +22,10 @@ int query_interface_for_available_frequencies();
+ void set_frequency(char *interface, int channel);
+ 
+ int read_current_freq_from_interface(char *interface);
++
++// Read WiFiLink/OpenIPC WFB channel from the YAML runtime configuration.
++// Returns the centre frequency in MHz, or -1 when no valid channel is present.
++int read_wfb_frequency(void);
++
++// Read the configured WFB txpower scalar (0..100 convention used by this profile).
++int read_wfb_txpower(void);

package/msposd/msposd.mk

@@ -0,0 +1,58 @@
+################################################################################
+#
+# msposd — pinned upstream plus HiLink WiFiLink mspVTX compatibility patch
+#
+################################################################################
+
+MSPOSD_SITE = $(call github,openipc,msposd,$(MSPOSD_VERSION))
+MSPOSD_VERSION = ad0175ce01c4e09b3eb4223fd683735f9df22715
+MSPOSD_DEPENDENCIES = libevent-openipc
+
+ifeq ($(OPENIPC_SOC_FAMILY),gk7205v200)
+	MSPOSD_FAMILY = goke
+	MSPOSD_OSDRV = $(GOKE_OSDRV_GK7205V200_PKGDIR)
+else ifeq ($(OPENIPC_SOC_FAMILY),hi3516ev200)
+	MSPOSD_FAMILY = hisi
+	MSPOSD_OSDRV = $(HISILICON_OSDRV_HI3516EV200_PKGDIR)
+else ifeq ($(OPENIPC_SOC_FAMILY),infinity6b0)
+	MSPOSD_FAMILY = star6b0
+	MSPOSD_OSDRV = $(SIGMASTAR_OSDRV_INFINITY6B0_PKGDIR)
+else ifeq ($(OPENIPC_SOC_FAMILY),infinity6c)
+	MSPOSD_FAMILY = star6c
+	MSPOSD_OSDRV = $(SIGMASTAR_OSDRV_INFINITY6C_PKGDIR)
+else
+	MSPOSD_FAMILY = star6e
+	MSPOSD_OSDRV = $(SIGMASTAR_OSDRV_INFINITY6E_PKGDIR)
+endif
+
+define MSPOSD_BUILD_CMDS
+	$(MAKE) CC=$(TARGET_CC) TOOLCHAIN=$(STAGING_DIR) DRV=$(MSPOSD_OSDRV)/files/lib $(MSPOSD_FAMILY) OUTPUT=$(@D)/msposd -C $(@D)
+endef
+
+define MSPOSD_INSTALL_TARGET_CMDS
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(@D)/msposd
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(@D)/safeboot.sh
+
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/share/fonts
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/share/fonts $(@D)/fonts/font_inav.png
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/share/fonts $(@D)/fonts/font_inav_hd.png
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/share/fonts $(@D)/fonts/font_btfl.png
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/share/fonts $(@D)/fonts/font_btfl_hd.png
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/share/fonts $(@D)/fonts/font_ardu.png
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/share/fonts $(@D)/fonts/font_ardu_hd.png
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc $(@D)/vtxmenu.ini
+endef
+
+define MSPOSD_INSTALL_LIBRARIES
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib $(MSPOSD_OSDRV)/files/lib/libcam_os_wrapper.so
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib $(MSPOSD_OSDRV)/files/lib/libmi_rgn.so
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib $(MSPOSD_OSDRV)/files/lib/libmi_sys.so
+endef
+
+ifeq ($(OPENIPC_SOC_VENDOR),sigmastar)
+MSPOSD_POST_INSTALL_TARGET_HOOKS += MSPOSD_INSTALL_LIBRARIES
+endif
+
+$(eval $(generic-package))