piotr/edgetx-gx12
1
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases Wiki Activity

feat: Updated German translations 🇩🇪 (#2360)

Browse Source 
* Update de.h

* Update de.h

* Update de.h

* Update de.h

* Update de.h
This commit is contained in:
ParkerEde
2022-09-27 13:08:14 +10:00
committed by GitHub
parent 248c160dbf
commit adaecb4a46
1 changed files with 149 additions and 149 deletions
Download Patch File Download Diff File Expand all files Collapse all files
radio/src/translations/de.h
+149 -149
View File
@@ -51,8 +51,8 @@
#define TR_TELEMETRY_PROTOCOLS "FrSky S.PORT","FrSky D","FrSky D (Kabel)","TBS Crossfire","Spektrum","AFHDS2A IBUS","Multi Telemetry"
#define TR_SBUS_INVERSION_VALUES "normal","not inverted"
#define TR_MULTI_TELEMETRY_MODE "Off","On","Off+Aux","On+Aux"
#define TR_MULTI_CUSTOM "Custom"
#define TR_MULTI_TELEMETRY_MODE "Aus","Ein","Aus+Aux","Ein+Aux"
#define TR_MULTI_CUSTOM "Benutzer"
#define TR_VTRIMINC TR("Expo","Exponentiell"),TR("ExFein","Extrafein"),"Fein","Mittel","Grob"
#define TR_VDISPLAYTRIMS "Nein","Kurz","Ja" // Trimmwerte Keine, kurze Anzeigen, Ja
#define TR_VBEEPCOUNTDOWN "Kein","Pieps","Stimme","Haptik"
@@ -269,7 +269,7 @@
#define TR_EXTRA_VSRCRAW "Batt","Time","GPS",TR_RESERVE_VSRCRAW,TR_RESERVE_VSRCRAW,TR_RESERVE_VSRCRAW,TR_RESERVE_VSRCRAW,"Tmr1","Tmr2","Tmr3"
#define TR_VTMRMODES "AUS","EIN","GSs","GS%","GSt"
#define TR_VTRAINER_MASTER_OFF "OFF"
#define TR_VTRAINER_MASTER_OFF "AUS"
#define TR_VTRAINER_MASTER_JACK "Lehrer/Buchse"
#define TR_VTRAINER_SLAVE_JACK "Schüler/Buchse"
#define TR_VTRAINER_MASTER_SBUS_MODULE "Lehrer/SBUS Modul"
@@ -331,8 +331,8 @@
#endif
#define TR_FREE "frei"
#define TR_YES "Yes"
#define TR_NO "No"
#define TR_YES "Ja"
#define TR_NO "Nein"
#define TR_DELETEMODEL "Modell löschen?"
#define TR_COPYINGMODEL "Kopiere Modell"
#define TR_MOVINGMODEL "Schiebe Modell"
@@ -345,7 +345,7 @@
#define TR_INPUTNAME TR("Input", "Input name")
#define TR_EXPONAME TR("Name", "Line name")
#define TR_BITMAP "Modellfoto"
#define TR_NO_PICTURE "No Picture"
#define TR_NO_PICTURE "kein Foto"
#define TR_TIMER "Timer"
#define TR_START "Start"
#define TR_ELIMITS TR("Erw. Limit", "Erw. Wege auf 150%")
@@ -365,7 +365,7 @@
#define TR_MS "ms"
#define TR_FREQUENCY INDENT "Frequency"
#define TR_SWITCH TR("Schalt.", "Schalter")
#define TR_TRIMS "Trims"
#define TR_TRIMS "Trimmer"
#define TR_FADEIN "Langs. Ein"
#define TR_FADEOUT "Langs. Aus"
#define TR_DEFAULT "(Normal)"
@@ -396,7 +396,7 @@
#define TR_FLMODE TR("Phase", "Phasen")
#define TR_MIXWARNING "Warnung"
#define TR_OFF "AUS"
#define TR_ANTENNA "Antenna"
#define TR_ANTENNA "Antenne"
#define TR_NO_INFORMATION TR("No info", "No information")
#define TR_MULTPX "Wirkung"
#define TR_DELAYDOWN "Verz. Dn"
@@ -430,8 +430,8 @@
#define TR_CONTRAST "LCD-Kontrast"
#define TR_ALARMS_LABEL "Alarme"
#define TR_BATTERY_RANGE TR("Akku Bereich", "Akku Spannungsbereich") // Symbol Akku Ladezustand
#define TR_BATTERYCHARGING "Charging..."
#define TR_BATTERYFULL "Battery full"
#define TR_BATTERYCHARGING "Lädt..."
#define TR_BATTERYFULL "Akku voll"
#define TR_BATTERYNONE "None!"
#define TR_BATTERYWARNING TR("Akku Warnung", "Akkuspannungswarnung")
#define TR_INACTIVITYALARM TR("Inaktivität", "Inaktivität nach")
@@ -439,10 +439,10 @@
#define TR_ALARMWARNING TR("Alle Töne aus?", "Alle Töne ganz aus?")
#define TR_RSSI_SHUTDOWN_ALARM TR(INDENT "RSSI-Chk aus?", INDENT "Prüfe RSSI bei Ausschalten")
#define TR_FLYSKY_TELEMETRY TR("FlySky RSSI #", "Use FlySky RSSI value without rescalling")
#define TR_MODEL_STILL_POWERED "Model still powered"
#define TR_USB_STILL_CONNECTED "USB still connected"
#define TR_MODEL_SHUTDOWN "Shutdown ?"
#define TR_PRESS_ENTER_TO_CONFIRM "Press enter to confirm"
#define TR_MODEL_STILL_POWERED "Modell noch aktiv!"
#define TR_USB_STILL_CONNECTED "USB noch verbunden"
#define TR_MODEL_SHUTDOWN "Herunterfahren?"
#define TR_PRESS_ENTER_TO_CONFIRM "Drücke [ENTER] zum Bestätigen"
#define TR_THROTTLE_LABEL "Gas-Kontrolle"
#define TR_THROTTLEREVERSE TR("Gas invers", INDENT "Vollgas hinten?") //Änderung wg TH9x, Taranis
#define TR_MINUTEBEEP TR("Min-Alarm", "Minuten-Alarm")
@@ -457,8 +457,8 @@
#define TR_KEYS_BACKLIGHT "Keys backlight"
#define TR_BLCOLOR "Farbe"
#define TR_SPLASHSCREEN TR("Startbild Ein", "Startbild Anzeigedauer")
#define TR_PWR_ON_DELAY "Pwr On delay"
#define TR_PWR_OFF_DELAY "Pwr Off delay"
#define TR_PWR_ON_DELAY "PWR EIN Verzög."
#define TR_PWR_OFF_DELAY "PWR AUS Verzög."
#define TR_THROTTLE_WARNING TR("Gasalarm", INDENT "Gas Alarm")
#define TR_CUSTOM_THROTTLE_WARNING TR(INDENT INDENT INDENT INDENT "Cust-Pos", INDENT INDENT INDENT INDENT "Custom position?")
#define TR_CUSTOM_THROTTLE_WARNING_VAL TR("Pos. %", "Position %")
@@ -580,37 +580,37 @@
#define TR_MULTI_TELEMETRY "Telemetry"
#define TR_MULTI_VIDFREQ TR(INDENT "Vid. Freq.", INDENT "Video Frequenz")
#define TR_RF_POWER INDENT "RF Power"
#define TR_MULTI_FIXEDID TR("FixedID", "Fixed ID")
#define TR_MULTI_FIXEDID TR("FesteID", "Feste ID")
#define TR_MULTI_OPTION TR(INDENT "Option", INDENT "Optionswert")
#define TR_MULTI_AUTOBIND TR(INDENT "Bind Ch.",INDENT "Bind on channel")
#define TR_DISABLE_CH_MAP TR("No Ch. map", "Disable Ch. map")
#define TR_DISABLE_TELEM TR("No Telem", "Disable Telemetry")
#define TR_MULTI_AUTOBIND TR(INDENT "Bind Ka.",INDENT "Bindung an Kanal")
#define TR_DISABLE_CH_MAP TR("No Ch. map", "Deaktiviere Ch. map")
#define TR_DISABLE_TELEM TR("No Telem", "Deaktiviere Telem.")
#define TR_MULTI_DSM_AUTODTECT TR(INDENT "Autodetect", INDENT "Autodetect format")
#define TR_MULTI_LOWPOWER TR(INDENT "Low power", INDENT "Low power mode")
#define TR_MULTI_LOWPOWER TR(INDENT "Low power", INDENT "reduzierte Leistung")
#define TR_MULTI_LNA_DISABLE INDENT "LNA disable"
#define TR_MODULE_TELEMETRY TR(INDENT "S.Port", INDENT "S.Port link")
#define TR_MODULE_TELEM_ON TR("EIN", "Aktiviert")
#define TR_DISABLE_INTERNAL TR("Disable int. RF", "Disable internal RF")
#define TR_DISABLE_INTERNAL TR("Deaktiv. int. RF", "Deaktiviere int. RF")
#define TR_MODULE_NO_SERIAL_MODE TR("!serial mode", "Not in serial mode")
#define TR_MODULE_NO_INPUT TR("No input", "No serial input")
#define TR_MODULE_NO_TELEMETRY TR3("Keine Telem.", "Keine MULTI_TELEMETRY", "Keine Telemetrie (aktiviere MULTI_TELEMETRY)")
#define TR_MODULE_WAITFORBIND "Bind to load protocol"
#define TR_MODULE_BINDING "Binding"
#define TR_MODULE_UPGRADE_ALERT TR3("Upg. needed", "Module upgrade required", "Modul\nUpdate nötig")
#define TR_MODULE_UPGRADE TR("Upg. advised", "Modulupdate empfohlen")
#define TR_REBIND "Rebinding required"
#define TR_MODULE_NO_TELEMETRY TR3("Keine Telem.", "Keine MULTI_TELEMETRIE", "Keine Telemetrie (aktiviere MULTI_TELEMETRIE)")
#define TR_MODULE_WAITFORBIND "Warten auf Bindung"
#define TR_MODULE_BINDING "Binde"
#define TR_MODULE_UPGRADE_ALERT TR3("Upg. nötig", "Modul Upgrade nötig", "Modul\nUpgrade nötig")
#define TR_MODULE_UPGRADE TR("Upg. empf.", "Modul Upgrade empf.")
#define TR_REBIND "Neu binden nötig"
#define TR_REG_OK "Registration ok"
#define TR_BIND_OK "Bind successful"
#define TR_BIND_OK "Binden erfolgreich"
#define TR_BINDING_CH1_8_TELEM_ON "Ch1-8 Telem AN"
#define TR_BINDING_CH1_8_TELEM_OFF "Ch1-8 Telem AUS"
#define TR_BINDING_CH9_16_TELEM_ON "Ch9-16 Telem AN"
#define TR_BINDING_CH9_16_TELEM_OFF "Ch9-16 Telem AUS"
#define TR_PROTOCOL_INVALID TR("Prot. invalid", "Protocol invalid")
#define TR_MODULE_STATUS TR(INDENT "Status", INDENT "Module Status")
#define TR_PROTOCOL_INVALID TR("Prot. invalid", "Protokoll ungültig")
#define TR_MODULE_STATUS TR(INDENT "Status", INDENT "Modul Status")
#define TR_MODULE_SYNC TR(INDENT "Sync", INDENT "Proto Sync Status")
#define TR_MULTI_SERVOFREQ TR(INDENT "Servo rate", INDENT "Servo update rate")
#define TR_MULTI_MAX_THROW TR("Max. Throw", "Aktiviere max. throw")
#define TR_MULTI_RFCHAN TR("RF Channel", "Select RF channel")
#define TR_MULTI_SERVOFREQ TR(INDENT "Servo Rate", INDENT "Servo Update Rate")
#define TR_MULTI_MAX_THROW TR("Max. Weg", "Aktiviere Max. Weg")
#define TR_MULTI_RFCHAN TR("RF Channel", "Wähle RF Kanal")
#define TR_SYNCMENU "Sync [MENU]"
#define TR_LIMIT INDENT "Grenzen"
#define TR_MINRSSI "Min. RSSI"
@@ -628,23 +628,23 @@
#define TR_VOLTAGE TR(INDENT "Spg", INDENT "Spannungsquelle") //9XR-Pro
#define TR_CURRENT TR(INDENT "Strom", INDENT "Stromquelle")
#define TR_SELECT_MODEL "Modell auswählen"
#define TR_MODELS "Models"
#define TR_SELECT_MODE "Select mode"
#define TR_MODELS "Modelle"
#define TR_SELECT_MODE "Wähle Mode"
#define TR_CREATE_MODEL TR("Neues Modell" , "Neues Modell erstellen")
#define TR_FAVORITE_LABEL "Favorites"
#define TR_NEW_MODEL "New Model"
#define TR_INVALID_MODEL "Invalid Model"
#define TR_EDIT_LABELS "Edit Labels"
#define TR_MOVE_UP "Move Up"
#define TR_MOVE_DOWN "Move Down"
#define TR_FAVORITE_LABEL "Favoriten"
#define TR_NEW_MODEL "Neues Modell"
#define TR_INVALID_MODEL "ungültiges Modell"
#define TR_EDIT_LABELS "Label ändern"
#define TR_MOVE_UP "Verschiebe nach oben"
#define TR_MOVE_DOWN "Verschiebe nach unten"
#define TR_ENTER_LABEL "Enter Label"
#define TR_LABEL "Label"
#define TR_LABELS "Labels"
#define TR_CURRENT_MODEL "Current"
#define TR_NEW "New"
#define TR_NEW_LABEL "New Label"
#define TR_RENAME_LABEL "Rename Label"
#define TR_DELETE_LABEL "Delete Label"
#define TR_CURRENT_MODEL "aktuell"
#define TR_NEW "Neu"
#define TR_NEW_LABEL "Neues Label"
#define TR_RENAME_LABEL "Label umbenennen"
#define TR_DELETE_LABEL "Label löschen"
#define TR_DUPLICATE_MODEL "Kopiere Modell"
#define TR_COPY_MODEL "Kopiere Modell"
#define TR_MOVE_MODEL "Verschiebe Modell"
@@ -654,42 +654,42 @@
#define TR_DELETE_ERROR "Fehler beim\nLöschen"
#define TR_SDCARD_ERROR "SD-Kartenfehler"
#define TR_SDCARD "SD Card"
#define TR_NO_FILES_ON_SD "No files on SD!"
#define TR_NO_FILES_ON_SD "Keine Dateien auf SD!"
#define TR_NO_SDCARD "Keine SD-Karte"
#define TR_WAITING_FOR_RX "Waiting for RX..."
#define TR_WAITING_FOR_TX "Waiting for TX..."
#define TR_WAITING_FOR_MODULE TR("Waiting module", "Waiting for module...")
#define TR_NO_TOOLS "No tools available"
#define TR_WAITING_FOR_RX "Warten auf RX..."
#define TR_WAITING_FOR_TX "Warten auf TX..."
#define TR_WAITING_FOR_MODULE TR("Warten Modul", "Warten auf Modul...")
#define TR_NO_TOOLS "Keine Tools vorhanden"
#define TR_NORMAL "Normal"
#define TR_NOT_INVERTED "Not inv"
#define TR_NOT_CONNECTED "!Connected"
#define TR_CONNECTED "Connected"
#define TR_NOT_CONNECTED "!Verbunden"
#define TR_CONNECTED "Verbunden"
#define TR_FLEX_915 "Flex 915MHz"
#define TR_FLEX_868 "Flex 868MHz"
#define TR_16CH_WITHOUT_TELEMETRY TR("16CH ohne Telem.", "16CH ohne Telemetry")
#define TR_16CH_WITH_TELEMETRY TR("16CH mit Telem.", "16CH mit Telemetry")
#define TR_8CH_WITH_TELEMETRY TR("8CH mit Telem.", "8CH mit Telemetry")
#define TR_16CH_WITHOUT_TELEMETRY TR("16CH ohne Telem.", "16CH ohne Telemetrie")
#define TR_16CH_WITH_TELEMETRY TR("16CH mit Telem.", "16CH mit Telemetrie")
#define TR_8CH_WITH_TELEMETRY TR("8CH mit Telem.", "8CH mit Telemetrie")
#define TR_EXT_ANTENNA "Ext. Antenne"
#define TR_PIN "Pin"
#define TR_UPDATE_RX_OPTIONS "Update RX options?"
#define TR_UPDATE_TX_OPTIONS "Update TX options?"
#define TR_MODULES_RX_VERSION "Module / RX version"
#define TR_MENU_MODULES_RX_VERSION "MODULE / RX VERSION"
#define TR_UPDATE_RX_OPTIONS "Update RX Optionen?"
#define TR_UPDATE_TX_OPTIONS "Update TX Optionen?"
#define TR_MODULES_RX_VERSION "Modul / RX version"
#define TR_MENU_MODULES_RX_VERSION "MODUL / RX VERSION"
#define TR_MENU_FIRM_OPTIONS "FIRMWARE OPTIONEN"
#define TR_IMU "IMU"
#define TR_STICKS_POTS_SLIDERS "Sticks/Pots/Sliders"
#define TR_PWM_STICKS_POTS_SLIDERS "PWM Sticks/Pots/Sliders"
#define TR_RF_PROTOCOL "RF Protocol"
#define TR_MODULE_OPTIONS "Module options"
#define TR_RF_PROTOCOL "RF Protokoll"
#define TR_MODULE_OPTIONS "Modul Optionen"
#define TR_POWER "Power"
#define TR_NO_TX_OPTIONS "No TX options"
#define TR_NO_TX_OPTIONS "keine TX Optionen"
#define TR_RTC_BATT "RTC Batt"
#define TR_POWER_METER_EXT "Power Meter (EXT)"
#define TR_POWER_METER_INT "Power Meter (INT)"
#define TR_SPECTRUM_ANALYSER_EXT "Spectrum (EXT)"
#define TR_SPECTRUM_ANALYSER_INT "Spectrum (INT)"
#define TR_SDCARD_FULL "SD-Karte voll"
#define TR_NEEDS_FILE "NEEDS FILE"
#define TR_NEEDS_FILE "Datei benötigt"
#define TR_EXT_MULTI_SPEC "opentx-inv"
#define TR_INT_MULTI_SPEC "stm-opentx-noinv"
#define TR_INCOMPATIBLE "Nicht kompatibel"
@@ -697,8 +697,8 @@
#define TR_EEPROMWARN "EEPROM"
#define TR_STORAGE_WARNING "SPEICHER"
#define TR_EEPROM_CONVERTING "EEPROM Konvertierung"
#define TR_SDCARD_CONVERSION_REQUIRE "SD card conversion required"
#define TR_CONVERTING "Converting: "
#define TR_SDCARD_CONVERSION_REQUIRE "SD Karte muss konvertiert werden"
#define TR_CONVERTING "konvertiere: "
#define TR_THROTTLE_UPPERCASE "GAS"
#define TR_ALARMSWARN "ALARM"
#define TR_SWITCHWARN "SCHALTER"
@@ -706,9 +706,9 @@
#define TR_TEST_WARNING TR("TESTING", "TEST BUILD")
#define TR_TEST_NOTSAFE "Use for tests only"
#define TR_WRONG_SDCARDVERSION TR("Erw. Version: ","Erwartete Version: ")
#define TR_WARN_RTC_BATTERY_LOW "RTC Battery low"
#define TR_WARN_MULTI_LOWPOWER "Low power mode"
#define TR_BATTERY "BATTERY"
#define TR_WARN_RTC_BATTERY_LOW "RTC Batterie schwach"
#define TR_WARN_MULTI_LOWPOWER "reduzierte Leistung"
#define TR_BATTERY "AKKU"
#define TR_WRONG_PCBREV "Falsche PCB erkannt"
#define TR_EMERGENCY_MODE "NOTFALL MODUS"
#define TR_PCBREV_ERROR "PCB Problem"
@@ -730,7 +730,7 @@
#define TR_V1 "V1"
#define TR_V2 "V2"
#define TR_DURATION "Dauer"
#define TR_DELAY "Verzög."
#define TR_DELAY "Verzögerung"
#define TR_SD_CARD "SD-Karte"
#define TR_SDHC_CARD "SDHC-Karte"
#define TR_NO_SOUNDS_ON_SD "Keine Töne" BREAKSPACE "auf SD"
@@ -772,13 +772,13 @@
#define TR_ASK_OVERWRITE "Möchten Sie überschreiben?"
#define TR_BLUETOOTH "Bluetooth"
#define TR_BLUETOOTH_DISC "Discover"
#define TR_BLUETOOTH_DISC "Suchen"
#define TR_BLUETOOTH_INIT "Init"
#define TR_BLUETOOTH_DIST_ADDR "Dist addr"
#define TR_BLUETOOTH_LOCAL_ADDR "Local addr"
#define TR_BLUETOOTH_PIN_CODE "PIN Code"
#define TR_BLUETOOTH_NODEVICES "No Devices Found"
#define TR_BLUETOOTH_SCANNING "Scanning..."
#define TR_BLUETOOTH_NODEVICES "kein Gerät gefunden"
#define TR_BLUETOOTH_SCANNING "Suche..."
#define TR_BLUETOOTH_BAUDRATE "BT Baudrate"
#if defined(PCBX9E)
#define TR_BLUETOOTH_MODES "---","Aktiviert"
@@ -834,9 +834,9 @@
#define TR_INTERNAL_MODULE TR("Int. module","Internal module")
#define TR_EXTERNAL_MODULE TR("Ext. module","External module")
#define TR_OPENTX_UPGRADE_REQUIRED "OpenTX upgrade nötig"
#define TR_TELEMETRY_DISABLED "Telem. disabled"
#define TR_MORE_OPTIONS_AVAILABLE "More options available"
#define TR_NO_MODULE_INFORMATION "No module information"
#define TR_TELEMETRY_DISABLED "Deaktiviere Telem."
#define TR_MORE_OPTIONS_AVAILABLE "mehr Optionen verfügbar"
#define TR_NO_MODULE_INFORMATION "keine Modul Info"
#define TR_EXTERNALRF "Externes HF-Modul"
#define TR_FAILSAFE TR(INDENT "Failsafe", INDENT "Failsafe Mode")
#define TR_FAILSAFESET "Failsafe setzen"
@@ -854,7 +854,7 @@
#define TR_POWERMETER_FREQ "Freq."
#define TR_MENUTOOLS "TOOLS"
#define TR_TURN_OFF_RECEIVER "Empf. ausschalten"
#define TR_STOPPING "Stopping..."
#define TR_STOPPING "Stoppe..."
#define TR_MENU_SPECTRUM_ANALYSER "SPECTRUM ANALYSER"
#define TR_MENU_POWER_METER "POWER METER"
#define TR_SENSOR "SENSOR"
@@ -869,8 +869,8 @@
#define TR_COPY "Zeile kopieren"
#define TR_MOVE "Zeile verschieben"
#define TR_PASTE "Zeile einfügen"
#define TR_PASTE_AFTER "Paste After"
#define TR_PASTE_BEFORE "Paste Before"
#define TR_PASTE_AFTER "Einfügen danach"
#define TR_PASTE_BEFORE "Einfügen davor"
#define TR_DELETE "Zeile löschen"
#define TR_INSERT "Neue Zeile"
#define TR_RESET_FLIGHT "Reset Flugdaten"
@@ -903,9 +903,9 @@
#define TR_BT_SELECT_DEVICE "Select device"
#define TR_DISCOVER "Discover"
#define TR_BUTTON_INIT BUTTON("Init")
#define TR_WAITING "Waiting..."
#define TR_RECEIVER_DELETE "Delete receiver?"
#define TR_RECEIVER_RESET "Reset receiver?"
#define TR_WAITING "Warte..."
#define TR_RECEIVER_DELETE "Empfänger löschen?"
#define TR_RECEIVER_RESET "Empfänger resetten?"
#define TR_SHARE "Share"
#define TR_BIND "Bind"
#define TR_REGISTER TR("Reg", "Register")
@@ -923,24 +923,24 @@
#define TR_TRAINER "DSC Buchse PPM In/Out"
#define TR_CHANS "Chans"
#define TR_ANTENNAPROBLEM CENTER "TX-Antennenproblem!"
#define TR_MODELIDUSED "ID used in:"
#define TR_MODELIDUNIQUE "ID is unique"
#define TR_MODELIDUSED "ID benutzt in:"
#define TR_MODELIDUNIQUE "ID ist eindeutig"
#define TR_MODULE "Modul-Typ"
#define TR_RX_NAME "Rx Name"
#define TR_TELEMETRY_TYPE TR("Typ", "Telemetrietyp")
#define TR_TELEMETRY_SENSORS "Sensoren"
#define TR_VALUE "Wert"
#define TR_REPEAT "Repeat"
#define TR_ENABLE "Enable"
#define TR_TOPLCDTIMER "Top LCD Timer"
#define TR_REPEAT "Wiederholung"
#define TR_ENABLE "Aktivieren"
#define TR_TOPLCDTIMER "oberer LCD Timer"
#define TR_UNIT "Einheit"
#define TR_TELEMETRY_NEWSENSOR INDENT "Sensor hinzufügen ..."
#define TR_CHANNELRANGE TR(INDENT "Kanäle", INDENT "Ausgangs Kanäle") //wg 9XR-Pro
#define TR_AFHDS3_RX_FREQ TR("RX freq.", "RX frequency")
#define TR_AFHDS3_ONE_TO_ONE_TELEMETRY TR("Unicast/Tel.", "Unicast/Telemetry")
#define TR_AFHDS3_RX_FREQ TR("RX Freq.", "RX Frequenz")
#define TR_AFHDS3_ONE_TO_ONE_TELEMETRY TR("Unicast/Tel.", "Unicast/Telemetrie")
#define TR_AFHDS3_ONE_TO_MANY "Multicast"
#define TR_AFHDS3_ACTUAL_POWER TR("Act. pow", "Actual power")
#define TR_AFHDS3_POWER_SOURCE TR("Power src.", "Power source")
#define TR_AFHDS3_ACTUAL_POWER TR("Tat.Leis", "tatsäch. Leistung")
#define TR_AFHDS3_POWER_SOURCE TR("Stromqu.", "Stromquelle")
#define TR_ANTENNACONFIRM1 "Ant. umschalten"
#if defined(PCBX12S)
#define TR_ANTENNA_MODES "Intern","Frag","Modellspezifisch","Intern + Extern"
@@ -996,11 +996,11 @@
#define TR_CONFIRMRESET TR("Alles löschen? ","ALLE Modelle+Einst. löschen?")
#define TR_TOO_MANY_LUA_SCRIPTS "Zu viele Skripte!"
#define TR_SPORT_UPDATE_POWER_MODE "SP Power"
#define TR_SPORT_UPDATE_POWER_MODES "AUTO","ON"
#define TR_NO_TELEMETRY_SCREENS "No Telemetry Screens"
#define TR_SPORT_UPDATE_POWER_MODES "AUTO","EIN"
#define TR_NO_TELEMETRY_SCREENS "Keine Telemetrie Seiten"
#define TR_TOUCH_PANEL "Touch panel:"
#define TR_FILE_SIZE "File size"
#define TR_FILE_OPEN "Open anyway?"
#define TR_FILE_SIZE "Dateigröße"
#define TR_FILE_OPEN "trotzdem öffnen?"
// Horus and Taranis specific column headers
#define TR_PHASES_HEADERS_NAME "Name "
@@ -1015,21 +1015,21 @@
#define TR_PHASES_HEADERS_FAD_OUT "Langs Aus"
// Horus layouts and widgets
#define TR_FIRST_CHANNEL "First channel"
#define TR_FILL_BACKGROUND "Fill background?"
#define TR_BG_COLOR "BG Color"
#define TR_SLIDERS_TRIMS "Sliders+Trims"
#define TR_SLIDERS "Sliders"
#define TR_FLIGHT_MODE "Flight mode"
#define TR_INVALID_FILE "Invalid File"
#define TR_TIMER_SOURCE "Timer source"
#define TR_SIZE "Size"
#define TR_SHADOW "Shadow"
#define TR_FIRST_CHANNEL "Erster Kanal"
#define TR_FILL_BACKGROUND "Hintergrund füllen?"
#define TR_BG_COLOR "Hintergrundfarbe"
#define TR_SLIDERS_TRIMS "Schieber+Trim"
#define TR_SLIDERS "Schieber"
#define TR_FLIGHT_MODE "Flugphase"
#define TR_INVALID_FILE "ungültige Datei"
#define TR_TIMER_SOURCE "Timer Quelle"
#define TR_SIZE "Größe"
#define TR_SHADOW "Schatten"
#define TR_TEXT "Text"
#define TR_COLOR "Color"
#define TR_MAIN_VIEW_X "Main view X"
#define TR_PANEL1_BACKGROUND "Panel1 background"
#define TR_PANEL2_BACKGROUND "Panel2 background"
#define TR_COLOR "Farbe"
#define TR_MAIN_VIEW_X "Hauptansicht X"
#define TR_PANEL1_BACKGROUND "Panel1 Hintergrund"
#define TR_PANEL2_BACKGROUND "Panel2 Hintergrund"
// Taranis Info Zeile Anzeigen
#define TR_LIMITS_HEADERS_NAME "Name"
@@ -1039,8 +1039,8 @@
#define TR_LIMITS_HEADERS_DIRECTION "Richtung"
#define TR_LIMITS_HEADERS_CURVE "Kurve"
#define TR_LIMITS_HEADERS_PPMCENTER "PPM Mitte"
#define TR_LIMITS_HEADERS_SUBTRIMMODE "Subtrim Mode"
#define TR_INVERTED "Inverted"
#define TR_LIMITS_HEADERS_SUBTRIMMODE "Subtrim Modus"
#define TR_INVERTED "Invertiert"
#define TR_LSW_HEADERS_FUNCTION "Funktion"
#define TR_LSW_HEADERS_V1 "V1"
@@ -1080,11 +1080,11 @@
#define TR_FLASH_ERASE "Flash erase..."
#define TR_FLASH_WRITE "Flash write..."
#define TR_OTA_UPDATE "OTA update..."
#define TR_MODULE_RESET "Module reset..."
#define TR_UNKNOWN_RX "Unknown RX"
#define TR_UNSUPPORTED_RX "Unsupported RX"
#define TR_OTA_UPDATE_ERROR "OTA update error"
#define TR_DEVICE_RESET "Device reset..."
#define TR_MODULE_RESET "Modul reset..."
#define TR_UNKNOWN_RX "unbekannter RX"
#define TR_UNSUPPORTED_RX "nicht unterstützter RX"
#define TR_OTA_UPDATE_ERROR "OTA Update Fehler"
#define TR_DEVICE_RESET "Gerät Reset..."
#define TR_ALTITUDE INDENT "Höhenanzeige"
#define TR_SCALE "Skalieren"
#define TR_VIEW_CHANNELS "Zeige Kanäle"
@@ -1120,19 +1120,19 @@
#define TR_SELECT_WIDGET "Widget auswählen" // grafisches Element
#define TR_REMOVE_WIDGET "Widget löschen"
#define TR_WIDGET_SETTINGS "Widget einstellen"
#define TR_REMOVE_SCREEN "Screen löschen"
#define TR_SETUP_WIDGETS "Setup widgets"
#define TR_USER_INTERFACE "User interface"
#define TR_REMOVE_SCREEN "Seite löschen"
#define TR_SETUP_WIDGETS "Widget einrichten"
#define TR_USER_INTERFACE "Benutzerschnittstelle"
#define TR_THEME "Theme"
#define TR_SETUP "Setup"
#define TR_SETUP "Einrichten"
#define TR_LAYOUT "Layout"
#define TR_ADD_MAIN_VIEW "Ansicht hinzufügen"
#define TR_BACKGROUND_COLOR "Hintergrundfarbe"
#define TR_MAIN_COLOR "Hauptfarbe"
#define TR_BAR2_COLOR "Secondary bar color"
#define TR_BAR1_COLOR "Main bar color"
#define TR_TEXT_COLOR "Text color"
#define TR_TEXT_VIEWER "Text Viewer"
#define TR_BAR2_COLOR "Sekundärfarbe (Bar)"
#define TR_BAR1_COLOR "Hauptfarbe (Bar)"
#define TR_TEXT_COLOR "Textfarbe"
#define TR_TEXT_VIEWER "Text Betrachter"
// ----------------------------- Symbole für Auswahlliste----------
#define TR_MENU_INPUTS STR_CHAR_INPUT "Inputs"
#define TR_MENU_LUA STR_CHAR_LUA "Lua Skripte"
@@ -1314,37 +1314,37 @@
// The following content is Untranslated)
#define TR_USE_THEME_COLOR "Use theme color"
#define TR_USE_THEME_COLOR "Farbe des Themes verwenden"
#define TR_ADD_ALL_TRIMS_TO_SUBTRIMS "Add all Trims to Subtrims"
#define TR_ADD_ALL_TRIMS_TO_SUBTRIMS "Alle Trimmungen übernehmen"
#if LCD_W > LCD_H
#define TR_OPEN_CHANNEL_MONITORS "Open Channel Monitor"
#define TR_OPEN_CHANNEL_MONITORS "Öffne Kanalmonitor"
#else
#define TR_OPEN_CHANNEL_MONITORS "Open Channel Mon."
#define TR_OPEN_CHANNEL_MONITORS "Öffne Kanalmon."
#endif
#define TR_DUPLICATE "Duplicate"
#define TR_ACTIVATE "Set Active"
#define TR_RED "Red"
#define TR_BLUE "Blue"
#define TR_GREEN "Green"
#define TR_COLOR_PICKER "Color Picker"
#define TR_EDIT_THEME_DETAILS "Edit Theme Details"
#define TR_DUPLICATE "Duplizieren"
#define TR_ACTIVATE "Aktivieren"
#define TR_RED "Rot"
#define TR_BLUE "Blau"
#define TR_GREEN "Grün"
#define TR_COLOR_PICKER "Farbauswahl"
#define TR_EDIT_THEME_DETAILS "Theme Details Bearb."
#define TR_AUTHOR "Author"
#define TR_DESCRIPTION "Description"
#define TR_SAVE "Save"
#define TR_CANCEL "Cancel"
#define TR_EDIT_THEME "EDIT THEME"
#define TR_DESCRIPTION "Beschreibung"
#define TR_SAVE "Speichern"
#define TR_CANCEL "Abbruch"
#define TR_EDIT_THEME "THEME Editieren"
#define TR_DETAILS "Details"
#define TR_THEME_EDITOR "THEMES"
// Main menu
#define TR_MAIN_MENU_SELECT_MODEL "Select\nModel"
#define TR_MAIN_MENU_MODEL_NOTES "Model\nNotes"
#define TR_MAIN_MENU_CHANNEL_MONITOR "Channel\nMonitor"
#define TR_MAIN_MENU_MODEL_SETTINGS "Model\nSettings"
#define TR_MAIN_MENU_RADIO_SETTINGS "Radio\nSettings"
#define TR_MAIN_MENU_SCREEN_SETTINGS "Screens\nSettings"
#define TR_MAIN_MENU_RESET_TELEMETRY "Reset\nTelemetry"
#define TR_MAIN_MENU_STATISTICS "Statistics"
#define TR_MAIN_MENU_ABOUT_EDGETX "About\nEdgeTX"
#define TR_MAIN_MENU_SELECT_MODEL "Wähle\nModell"
#define TR_MAIN_MENU_MODEL_NOTES "Modell\nNotizen"
#define TR_MAIN_MENU_CHANNEL_MONITOR "Kanal\nMonitor"
#define TR_MAIN_MENU_MODEL_SETTINGS "Modell\nKonfig."
#define TR_MAIN_MENU_RADIO_SETTINGS "Sender\nKonfig."
#define TR_MAIN_MENU_SCREEN_SETTINGS "Seiten\nKonfig."
#define TR_MAIN_MENU_RESET_TELEMETRY "Reset\nTelemetrie"
#define TR_MAIN_MENU_STATISTICS "Statistiken"
#define TR_MAIN_MENU_ABOUT_EDGETX "Über\nEdgeTX"
// End Main menu