* Added OneBit option also to color radios
* Try to work around GH repo owner issue
Original by @raphaelcoeffic in https://github.com/EdgeTX/edgetx/commit/bf4b5d8c0c1e386d5a4852a80d459540bab98ed3
* Add Companion support for radios with external module
* Companion housekeeping - do not display unnecessary hardware section headings
* fix: Rebase cleanup
* fix: LVGL changes
* feat: Move sample mode to a new Ext RF block
Co-authored-by: elecpower <neilh713@tpg.com.au>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Do not list OFF on VCP menu if internal RF module is set to CRSF to allow pass-through flashing.
Set USB-VCP automatically to CLI when CRSF mode is selected for internal module and it was previously OFF. Activate CLI when iCRSF is selected.
* Companion part
Co-authored-by: elecpower <neilh713@tpg.com.au>
Adds USART6/AUX2 support also to Jumper T16 & T18. TX and RX lines are accessible via internal FrSky Bluetooth module pads on the mainboard. The USART6/AUX2 serial port functionality is usable more generic on these radios as well and not limited to Bluetooth only.
E.g. radio GPS is supported after this change (as are further serial port modes).
Only if firmware is explicitly built with -DBLUETOOTH=YES, USART6 will be dedicated to Bluetooth (as is the case also e.g. with TX16S).
* Add PR number to version string
* Testing another way
* Decide according to GitHub ref type how to parse and where to output.
Prioritize EDGETX_VERSION_TAG, if set, else resort to EDGETX_VERSION_SUFFIX, if set.
Adjust also firmware_version and boot_version strings and adjist bootloader title.
* Consider also B/W.
* B&W: omit GIT SHA if tagged, otherwise own line
Omit GIT SHA from version string if a tagged version.
Otherwise, show on own line since is too long for 128x64 B&W displays.
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Show true unscaled and unfiltered analogs for diagnose purpose on the analog diagnose screen.
Tested on physical RM TX16S, not yet tested on B/W targets.
* Changed to decimal display also on B/W targets. Tested now with RM Zorro as well.
* 5 fps refresh rate of the raw analog values. Much nicer to look at.
* Time-changing 3 views for color radios: std., filtered raw with deviation, unfiltered raw.
* Corrected deviation view output to not use old values.
* Changed analogs diagnose page to user navigatable TabsGroup with 3 tabs.
* Added fourth analog diagnose tab to show minimum and maximum values and the range (difference between min and max).
Left touch screen and IMU output tests only on first page (should also move in the future to their respective dedicated pages).
* Use Std. JitterAlpha filtering for Deviation screen to minimize delay, omit filtering for FlySky digital hall gimbals - not necessary, the signal is stable enough.
* 2 analog diagnose pages for 128x64 B/W radios: calibrated analogs and raw values with display output limited to 5 frames-per-second due to visibility reasons.
* Added 2 analogs diagnose pages also for 212x64 display B/W radios.
I was only able to simulate it, not tested on real hardware.
* Support also radios that do not have PageUp/PageDn keys, but only Page key (e.g. X7).
* Better key handling and improved style thx to @pfeerick
New Zorro revision uses internally 3.3V VREG and requires this change to properly sense the battery voltage. Tested on latest revision of physical Zorro.
* Easier inversion code.
* Evaluate define INVERTED_ROTARY_ENCODER instead.
* Make Zorro roller direction more natural and matching also TX16S navigation style.
* Fix building with -DGVARS=NO
* Thx @eshifri for the tip
Better solution
* Don't show GVARS tab if GVARS turned off
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Fix compiler warning
Fix compiler warning about comparing signed with unsigned.
* Fix minor bug
category->size() is unsigned int, not long unsigned int
* Typo
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Fixes DMA2D ConfError
* Check configuration and transfer errors
Check for DMA2D configuration and transfer errors and do not enter the otherwise endless while loop. Thx to @raphaelcoeffic for the tip.
Fixes power-off HardFault during hw-debugging at the end of boardOff(), when power supply to MCU is forced (developer boards, w/o cutting power with pwrOff() ).
