Imported from open-flysky/Flysky-OpenTX-Test-Branch
* companion: Don't nuke `stickDeadZone` setting
* Implement data storage properly
* Add missing check for NV14 storage struct sizes
* Formatting
* Use one less byte in the packed data struct
Thanks @raphaelcoeffic :)
* Move setting of stickDeadZone default
* Use a Choice combo rather than NumberEdit
* Good riddance magic number
* Also set default stick zone if setting is missing
* Teach tests about `STICK_DEAD_ZONE`
* Tweak choice width
* Cpn NV14 add stick dead zone to hardware and section labels
* Cpn NV14 align default pot names to radio
Co-authored-by: elecpower <neilh713@tpg.com.au>
* Allow trainer modes OFF and Master-Multi for all radios
* Change Trainer mode Off to the standard OFF
* fix: German for Trainer OFF, Master and Slave
* Added CN/TW translation and reduced TW text size
Added CN/TW translation and reduced TW text size.
Because the TW text causes the firmware to exceed the flash size, reduce the text size.
* Modify the STM32 BOR level on TX16S to avoid system failure in extreme cases
Modify the STM32 BOR level on TX16S to avoid system failure in extreme cases.
* Update cn.h.txt
* Update tw.h.txt
* Jump from mixes/outputs to channel monitor
* remove unnecessary headers
* Add Button names to translations
* jump from any model page to channel monitor
* Use TELEM short press instead of long press.
* Support TXs with pure touch interface
* Change to KEY_MODEL, whitespace cleanup, git eol
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* feat: Add option for rotary encoder direction
Based heavily on opentx/opentx#8852 by @3djc
* companion ui elements
* Cleanup
* Hook up UI, reading setting from yaml
* Teach simulator about rotEncDirection
* Simu and radio default scroll direction correction
Otherwise the "default" would be the opposite to how it has always been
* Remove what will be a confict with fix in #1586
* Wasn't using rotEncDirection consistently
* Zorro RE dir is opp to TX16, TX12, TPro, X9D+2019
* transferred respective OpenTX updates to HoTT telemetry
* integrated LUA function flushAudio from OpenTx
* sensor names moved to “untranslated.h”
reverted *.h.txt to original mainline content
removed leading "Z" in sensor name defines
* Model templates - select and load after Create Model for color radios
* Model templates - save model as template, only for color radios
* Small fix to drawTextLines(...) to handle consecutive spaces
* Change title of button for empty template folder
* I found out why "no trailing slash = important" in path names!
* Reworked file and path name string manipulation
No longer using chdir, as Lua scripts etc. could be messing with the working dir
Use buffers more and std::string less
* Adjusting the size of buffers
I think that I got it right now. Really hard to figure out the right size constants!
Also added storageDirty(EE_MODEL) after reading the template file and renaming the model
* Added storage checks
* Slight simplification - all template buttons are similar
* Added "Blank Model" button
* Wizard Lua script
If there is a Lua script with the same name as the template file in the folder, then it is run after reading the template.
* replaced fix strings with translations
* additional strings
* replaced wrong german string to english in all but german translations
* fixed spelling
* replace magic number for throttle idle with correct define
* settings for custom throttle warning position
* settings fixed not to break byte-aligment of bit-fields
* evaluate custom throttle warning position
* add requested throttle value to warning text
* comment about field alignment in ModelData struct
* Menu for editing custom throttle warning for 128x64 radios
Tested on RM TX12
* Improoved menu display
* move displayed strings to translation
* translation template added for each language
* support for 212x64 B&W radios
* menu for colorlcd
not tested
* corrected translation entry for TW
* corrected handling of padding bits in ModelData structure
* Companion support for custom throttle warning position
* Rebase catchup
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* ADC Filter - On/off state configurable at the model level
* Updated YAML configuration to match change from ADC Filter feature commit
* Companion changes to support ADC jitter filter to be a model configuration item.
* Renamed jitterFilter field to noJitterFilter.
This better describes the semantic, which is inverted.
* Updated after review
* Re-run generate-yaml
* Changed ADC Jitter filter control on Model to be tri state.
Off, On or use the radio setting
* Adde NOBACKUP() to the added field
* Re-generate yaml_datastructs
* Making the default state to use radio setting/Global value
* Updated after review:
Changing to more consistent naming across firmware and companion.
* Reverted files that was accidently added to the commit.
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Show true unscaled and unfiltered analogs for diagnose purpose on the analog diagnose screen.
Tested on physical RM TX16S, not yet tested on B/W targets.
* Changed to decimal display also on B/W targets. Tested now with RM Zorro as well.
* 5 fps refresh rate of the raw analog values. Much nicer to look at.
* Time-changing 3 views for color radios: std., filtered raw with deviation, unfiltered raw.
* Corrected deviation view output to not use old values.
* Changed analogs diagnose page to user navigatable TabsGroup with 3 tabs.
* Added fourth analog diagnose tab to show minimum and maximum values and the range (difference between min and max).
Left touch screen and IMU output tests only on first page (should also move in the future to their respective dedicated pages).
* Use Std. JitterAlpha filtering for Deviation screen to minimize delay, omit filtering for FlySky digital hall gimbals - not necessary, the signal is stable enough.
* 2 analog diagnose pages for 128x64 B/W radios: calibrated analogs and raw values with display output limited to 5 frames-per-second due to visibility reasons.
* Added 2 analogs diagnose pages also for 212x64 display B/W radios.
I was only able to simulate it, not tested on real hardware.
* Support also radios that do not have PageUp/PageDn keys, but only Page key (e.g. X7).
* Better key handling and improved style thx to @pfeerick
* Resolve a problem in font generation when y_offset is negative.
* Change to use full dynamic detection of special chars, generalized for all languages including cjk.
* Isolated colorlcd and bwlcd translation encoding method.
* Fixed the cz char mapping.
* Only cz requires subset lowercase handling.
Rebase and modify #1263 and resubmit
Added new translations for the popup main menu
Added new translations for theme
Fixed wrong translations
@richardclli Please check
* partial implementation of 354
* implemented screen refresh and test update
* chaged add to move...after much discussion
* change move to add
Co-authored-by: kkoenig1@optonline.com <kkoenig1@optonline.com>
* Add theme editor
- added theme editing support to radio
- color editing controls
- split screen into browser and editor
- removed dead code from coloreditor,
- new radio theme editing icon
* Resolve compile error & merge cleanup
* 1. fix exit key press in ThemeEditor. It was not exiting screen
2. added ability to touch PageButton() on ColorEditPage()
Co-authored-by: kkoenig1@optonline.com <kkoenig1@optonline.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Make img buf only size of img not whole widget
* Don't draw buffer if there's no image
* If there's no image, draw model name
* Add some options, draw model name if img not set
Add options for text colour, size, fill enable and colour
* Use valid values for defaults
* Get right colours
* Add concept of a 'friendly name to widgets'
Allows for separation of internal and user visible names
* Use new theme constants
* Use right version of libopenui
* `displayName` instead of `friendlyName`
* Allow using theme colour or custom for name
* added a new special function to disable the touch screen
* Bump libopenui
* Don't try to disable touch if no hardware touch
* Disable processing of SF if no touch hardware
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* add range and high power to MV14
* remove spaces
* fix compilation
* compilation fix 2
* Whitespace cleanup and placate git
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* consolidated all color fixes and screen enhancements into one new branch
* Bump libopenui
* enhanced telementry sensor display
* fix discover and add sensor buttons on NV14.
* changed quick menu to not use theme colors as per JimB. Fixed telemetry buttons for NV14
* fix colors on trainer page
* Merge cleanup
* Update libopenui
Co-authored-by: kkoenig1@optonline.com <kkoenig1@optonline.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>