Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* Add options to disable radio and model menu tabs.
- Update radio and model data structs
- UI for color LCD radios
- Convert existing 'noGlobalFunctions' property.
- Language strings.
* Make 'theme' control specific to color LCD radios.
* Add B&W radio UI.
* Simplify code, reduce compiled code size.
Fix page count display on model select tab.
Fix GVARS for 212x64 radios.
* Collapse timer sections if timer is off.
* Remove 'Use global functions' checkbox from B&W model setup.
* Make preflight checks, throttle and view options sections expand & collapse (default collapsed).
* Fix build.
* Add view options to companion data classes, save and load values in YAML files.
Fix scrolling for radio setup view options.
* Add Companion UI for view option settings.
* Remove 'Mixes' from list of tabs that can be hidden.
* Updated Companion UI from elecpower.
* Use view options flags to enable/disable functionality:
- skip heli mixer logic if heli not enabled
- Remove heli, gvars and telemetry options from source selection if not enabled
* Remove 'flight mode', 'curve' and 'global variable' settings from input & mix editors if option disabled.
* Rename 'View Options' to 'Enabled Features'.
Put GVAR option under Flight Mode and indent text.
Make relationship between FM and GV more obvious.
* Remove global variable option dependency on flight modes.
Hide FM1-FM8 in global variables if flight modes hidden.
* Hide 'Custom Mixer Scripts' in source selection menu popup if disabled.
* Add translation strings for Hebrew language file.
* Fix typo. Add comment for double call to setCurrentTab.
* Show the 'Press any key to skip' message on alerts that currently have no message.
* Show action button on storage format warning also
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Allow switches on the connected radio to control switches in the simulator via the joystick interface.
* Merge configurable radio joystick interface from banyaszg.
* Add two more 'axis' channels to companion.
* Fix 6POS from USB joystick to simulator.
* Reduce data size.
* Fix build error on B&W radios.
* Add 'Companion' button mode to work with the button logic in the Companion app.
* Build Companion joystick setup layout at runtime.
Change #define names for simulator joystick.
Allow 15 axes and 32 buttons.
Initial support for trim sliders.
* Remove custom joystick button type for companion - use 3 buttons per switch in companion to control simulator switch state.
* Fix joystick constructor calls parameters. Connect some radio joystick trims to simulator widgets.
* Restore 'companion' button type to reduce number of buttons needed. Make trims work via buttons in USB joystick.
* Connect joystick trim buttons to simulator widgets.
* Use companion source names for trims.
* Add encode / decode of usb joystick custom settings to Companion.
* Convert to lvgl layouts.
Update language files.
* Fix generated YAML storage files.
* Fix initialisation error when editing button channel. Cleanup code.
* Fix rebase.
* Fix refresh of joystick channel list view after editing an entry.
Companion joystick config window uses two columns.
* Fix vertical joystick inversion bug.
Change stick axis labels.
---------
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
* chore(pc): convert simu/simulator/companion to use SDL2
* switch companion builds to SDL2 - OSX is not converted
the linux change is done a bit hacky, it should be done by updating the EdgeTX docker container
* update build system setup scripts
* add compatibility for old and new SDL2 cmake integration
* fix windows installer
* fix simulator audio on windows by using DirectSound vie SDL2
* fix windows audio with SDL2
enable simu for windows builds
* remove workflow changes for linux builds, this needs to be fixed in the build environment
* fix OSX build, thx @pafleraf
* fix windows audio for companion and simulator with SDL2
* select SDL2 branch of the build-docker environment
* Revert "select SDL2 branch of the build-docker environment"
This reverts commit da801609d78e1aed513ad7d9d8ab3ebded2900b9.
* fix tests with SDL2
* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* Moved getFieldInfo and getValue up right after related functions
* Modified getValue to return a valid status, so Lua can see if it got zero because of invalid source id
* Added new getSourceValue Lua function per Issue #781
Also added alias getSourceInfo for getFieldInfo
* Updated according to comment https://github.com/EdgeTX/edgetx/pull/2175#issuecomment-1245605114
* Replaced isFresh() by !isOld() as requested in https://github.com/EdgeTX/edgetx/pull/2316#issuecomment-1246759370
* Clean up `lua_pushtablenil` - tables cannot hold nil values
* Changed isFresh() to !isOld() ... AGAIN
* Return both `!isOld()` and `isFresh()`
* Return nil for all values if the item does not exist
* Return 0 instead of pushing three nil values
* Update documentation
Use `-DSPACEMOUSE=YES` CMake option to activate on Horus color targets.
Co-authored-by: Niel Horne (elecpower), Raphael Coeffic (raphaelcoeffic) and Peter Feerick (pfeerick).
* First build
* Fix X9
* Update api_general.cpp
* Update translations.h
* clean up translations
* fix: B&W option handling, remove magic numbers, cleanup
- Remove references to invertRotary, change to RotEncDir or similar
- Add compatabilty importing to companion, firmware
- Rename Lua API call
- Move magic numbers to enum
- Improve B&W option handling so it doesn't apply changes while in menu
* chore: yaml regen
* fix: Add missing guards for X9D/X9D+
* fix: Wrong enum name in simu
* fix(cpn): Use correct names for UI elements
* fix: Translations
* fix: Allow `rotEncMode` in all yaml due to x9d var
Of the three X9D variants, the X9D+2019 is the only one that
has a rotary encoder as standard. However, as the base config
file is for the X9D, this meant it wasn't reading or writing the
config value. Rather than add a seperate config file for it for
a single variable, simple to just allow it across all targets.
* fix: Companion string, change colorlcd to `Choice`
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* feat: Add option for rotary encoder direction
Based heavily on opentx/opentx#8852 by @3djc
* companion ui elements
* Cleanup
* Hook up UI, reading setting from yaml
* Teach simulator about rotEncDirection
* Simu and radio default scroll direction correction
Otherwise the "default" would be the opposite to how it has always been
* Remove what will be a confict with fix in #1586
* Wasn't using rotEncDirection consistently
* Zorro RE dir is opp to TX16, TX12, TPro, X9D+2019
* Warn on connected model (#1466)
* Make it so not confirming aborts model change
* add delay before accepting disconnected telemtry
* Add power off delay
* Remove whitespace + time unit in name
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Show true unscaled and unfiltered analogs for diagnose purpose on the analog diagnose screen.
Tested on physical RM TX16S, not yet tested on B/W targets.
* Changed to decimal display also on B/W targets. Tested now with RM Zorro as well.
* 5 fps refresh rate of the raw analog values. Much nicer to look at.
* Time-changing 3 views for color radios: std., filtered raw with deviation, unfiltered raw.
* Corrected deviation view output to not use old values.
* Changed analogs diagnose page to user navigatable TabsGroup with 3 tabs.
* Added fourth analog diagnose tab to show minimum and maximum values and the range (difference between min and max).
Left touch screen and IMU output tests only on first page (should also move in the future to their respective dedicated pages).
* Use Std. JitterAlpha filtering for Deviation screen to minimize delay, omit filtering for FlySky digital hall gimbals - not necessary, the signal is stable enough.
* 2 analog diagnose pages for 128x64 B/W radios: calibrated analogs and raw values with display output limited to 5 frames-per-second due to visibility reasons.
* Added 2 analogs diagnose pages also for 212x64 display B/W radios.
I was only able to simulate it, not tested on real hardware.
* Support also radios that do not have PageUp/PageDn keys, but only Page key (e.g. X7).
* Better key handling and improved style thx to @pfeerick
[Lua] Add setStickySwitch and getLogicalSwitchValue (#1056)
* Adds setStickySwitch to set the value of a stick logical switch
* Adds getLogicalSwitchValue to get the value of a logical switch by index
* added a new special function to disable the touch screen
* Bump libopenui
* Don't try to disable touch if no hardware touch
* Disable processing of SF if no touch hardware
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
This has the added benefit of precision increase and also avoiding unnecessary computation. Needed to change to uint32_t, as the jitter removal computation would otherwise go over the 16-bit range. As 16-bit computation can be left for "normal" sticks, added a special define just for FLYSKY_HALL_STICKS.
In addition this PR changes back the radio analogs diagnose page second column also for FlySky digital hall sticks to show +/- 100 again, as now with first and second column we already cover all internal ranges used.
Tested on RM TX16S with FlySky digital hall sticks.