Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* chore(pc): convert simu/simulator/companion to use SDL2
* switch companion builds to SDL2 - OSX is not converted
the linux change is done a bit hacky, it should be done by updating the EdgeTX docker container
* update build system setup scripts
* add compatibility for old and new SDL2 cmake integration
* fix windows installer
* fix simulator audio on windows by using DirectSound vie SDL2
* fix windows audio with SDL2
enable simu for windows builds
* remove workflow changes for linux builds, this needs to be fixed in the build environment
* fix OSX build, thx @pafleraf
* fix windows audio for companion and simulator with SDL2
* select SDL2 branch of the build-docker environment
* Revert "select SDL2 branch of the build-docker environment"
This reverts commit da801609d78e1aed513ad7d9d8ab3ebded2900b9.
* fix tests with SDL2
* CMake cleanup and simplifications
* Position Independent Code is need for radiolib_native
* Some more cleanup & repair
* Fix SIMU_SRC scope issue
* fix: avoid warnings due to assembler statements from StdPeriph on arm64 native
* Introduce yaml in Companion
* EdgeTX Companion
Replace some OpenTX refs
Data conversion to v220
Update Timers ui to cater for mode field split
* Fix some simulators crashing when started from Companion
* Disable firmware and app update checking and downloads from companion
* Some more rebranding
* Disable manual download actions and another rebrand
* Fix cmake warning
* Fix mode ON conversion gtests and enable switch in model edit
* Stop update message when updates turned off
* OpenTX #8580 Fixes missing negative sign for telemetry sources
* OpenTX #8604 fix curves tooltip colors
* OpenTX #8616 Fix release notes url references
* OpenTX #8548 Align file sync folder references
* OpenTX #8548 Link field once
* OpenTX #8550 Confirmation prompt before write models and settings to radio
* OpenTX #8550 Translate strings
* Title and splash images
* Change DEB package maintainer
* Start NV14
* NV14 continued
* NV14 sim
* Timer countdownStart data conversion and ui fixes
* Fix screen width
* Merge OpenTX PR 8675
* NV14 sim add computer keys and mouse to activate some functions
* Only allow supported protocols for each module on conversion
* Clear mismatched modules on conversion
* Replace colorlcd theme and layout blobs with detailed data structs in companion
* NV14 has 2 topbar zones
* Fix layout init
* Fix layout init again
* Reset to eepromimportexport.h to main branch
* Import/export does not like enum fields
* Model edit add custom screens tab for color and bw telemetry
* Free memory
QT 5.11 finally removes the qt5_use_modules macro.
Instead target_link_libraries with the Qt5::Lib added should be used.
Since we already use that in one place, it should work everywhere. Since
the common companion lib already depends on Core, widges and multimedia
components that link against it, also implicitly link against those
libraries.
* [Simulator] Create RadioKeyWidget class for UI buttons & refactor ButtonsWidget; Refactor SimulatedUIWidget (and subtypes) to use new RadioKeyWidgets/ButtonsWidget; Centralize help text for key mappings and get creative with some icons; Simplify some radio UI setups with rectangular buttons.
* [Simulator] Convert all simulator data I/O to signals/slots mechanism:
* SimulatorInterface/OpenTxSimulator:
- Now inherits from QObject to allow signal/slot interface;
- Allows data exchange on a per-item basis (eg. each I/O value is treated separately instead of sending whole arrays or structs of data);
- Checks for data changes and only emits signals when change is detected (GUI can now assume only new values are being sent);
- Manages its own 10ms timer (doesn't rely on GUI to do that);
- Sends "heartbeat" signals @ 1Hz for status monitoring;
* Simulator GUI:
- All data is exchanged between GUI elements as well as SimulatorInterface via signals/slots using standardized methods;
- Data is sent immediately, and only, when actually changed (eg. a control is moved) instead of in bulk at specific time intervals;
- Similarly, an asynchronous method is used for reading incoming data, w/out timers or loops;
- Improve VirtualJoystickWidget to be more encapsulated and configurable;
- Pause telemetry simulator if window is hidden;
* [Simulator] Move SimulatorInterface instance to separate thread, ensure safe asynchronous operations & proper timer interactions; Protect/remove some functions, & reorganize the order (cosmetics).
* [Simulator] Traces are now delivered to OpenTxSimulator and one or more QIODevice(s) can be added as recipient(s); Add SimulatorInterface::getCapability() for compile-time settings; Remove reversed POT1/SLIDER1 mixer exception (Taranis) requirement for SIMU; Fix plus/minus key delay on wheel event w/out encoder.
* [Simulator] Add current knob/slider/trim input value in tool-tips (KnobWidget and SliderWidget).
* [Simulator] Fix trims widget internal value not properly updating, and remove trim influence on virtual joystick X/Y value display (closes#4671).
* [SimulatorInterface] Add handling of transmitter input voltage, including a rough conversion of volts to ADC value for different boards, and default battery volts lookup function; Clear analogs array before starting.
* [Simulator] Add SimulatorInterface::init() method to separate pre-startup tasks; Report actual trim range, not just extended on/off; Change how radio widget states are restored; VirtualJoystickWidget: Connect trim changes directly from simulator, connect joystick events directly, report stick mode directly instead of setting values/constraints externally.
* [Simulator] Calculate default Tx V input based on configured range in radio settings (or warning V+2 for radios which don't support a range).
* [Simulator] Add functional aux. trims for Horus (closes#4699).
* [Companion] Remove problematic QMessageLogContext from AppDebugMessageHandler::messageOutput().
* [Simulator] Prevent trim change via slider if disabled for flight mode (closes#4600).
* [OpenTxSimulator] Fixes for Qt < 5.4.
* [OpenTxSimulator] Fix slot name.
* [build] Add "all-libsimulators" target to build all simulator flavors at once.
* [build] Refine the "all simulators" target setup and deal with GNU 'make' parallelism issue (ninja=faster); rename to "all-simu-libs".
* [Companion][Simulator] Add custom qDebug message handler/formatter as an option. Keeps support for QT_MESSAGE_PATTERN env. var.
* [Simulator] Show system messages of level qInfo and above in debug console.
* [Simulator] Still capture screenshot to clipboard if path is not accessible (and screenshot results now print to simulator debug console).
* Fix for older CMake.
* [Companion] Do not start debug message handler if app is shutting down, and add null checks before using it; Increase backtrace report depth; Add OTx headers; Add Companion exit status debug; Clean up unused code.
* [Simulator] Add asynchronous FIFO buffer for handling debug output/display more efficiently. (#4488)
(cherry-picked from b12bd7d7be)
* [build][CMake] Use `find_package(Git)` to confirm existence before trying to use git for version stamp; Use friendlier detection of grep executable on Windows; Use "del" on Windows instead of "rm".
* [build][Windows] Include dirent and msinttypes headers in source tree.
* Remove grep dependency for lua exports generation
* Sneaky pythons hiding in code.
* [build] Change `git_id` macro to skip check if no git directory is present, also now fails gracefully; Fix `today` macro on Windows; Report git revision; Make sure QtSvg module is found.
* Re #4224: Introduced settingsPath and use std::string for paths in simpgmspace.
* Re #4224: Relevant parts of simpgmspace.cpp moved into simufatfs.cpp and simudisk.cpp
* Removed "/" from "mask_monitor_logsw.png"
* Re #4224: findTrueFileName() refactoring
* Faster gtests (less waiting for eeprom operations to finish)
* Re #4224: Radio settings and models directories now taken from alternate path (if set) [simu]
* Fixes#3322: together with previous changes to the SD browser this prevents the simulator from browsing higher than SD card root path.
* f_chdir() debug traces
* [TravisCI] Build using avr-gcc 4.9.2 (up from 4.8.2). Relies on https://github.com/opentx/opentx/pull/4169 . Fixes all linker warnings, makes clean build.
* [build] Add ARM/AVR compiler version check/display and a workaround for avr-gcc linker warnings when using WARNINGS_AS_ERRORS=true.
* [TravisCI] Enable -Werror on all build targets (WARNINGS_AS_ERRORS=true).
* [build] CMake script updates:
Enable WARNINGS_AS_ERRORS option for all targets (not just firmware);
Consolidate some C/CXX flag settings for firmware target, avoid duplication/redundancy;
All warning flags are now passed to linker (GCC only);
Add a "build report" for each main target showing compiler, flags, and defines, with verbosity controlled by new VERBOSE_CMAKELISTS option;
Added properties to PCB, TRANSLATIONS, and a few other options (makes option selector lists in cmake-gui);
Add macro for conditionally adding C++11 flag;
Silence CMake >3.0 warnings about CMP0054 policy not being set;
Reverts AVR linker -Werror workaround;
Misc. cleanup/consolidation.
* [build] More CMakeLists updates:
Silence superfluous "CRT_SECURE" series MSVC warnings;
Formalize finding pthread lib/dll on MSVC builds and fix some issues with install target script;
Add property string lists to more options;
Quotes some paths with possible spaces, & other minor cosmetics.
* [build] firmware/bootloader: Remove remaining CMake default compiler flags and add FIRMWARE_C[XX}_FLAGS[_DEBUG] options for user to specify additional flags. Also move ASM language call to silence CMake warning w/MSVC.
* [build] Workaround bogus "uninitialized" warnings from AVR linker.
* [tests] Add custom printer for less verbose gtest output (use --verbose option to revert to gtest default).
* [build] Use less verbose CMake output for TravisCI builds. Formalize search for gtest code and enable gtests target on WIN32-GCC. Minor language fix.
* [Windows][MinGW] Update some WIN32 macro checks in source code to be MSVC-specific (not needed for GCC-based builds).
* [build] CMakeLists updates:
Adjust for Windows MinGW builds: now fully compatible with Qt5.5+ and MinGW-w64 toolchain (included in Qt installs);
Add option to specify path to required libraries/includes (instead of hard-coding `c:\programs`);
Add package check for Python and use found executable name;
Remove custom FindSdl package handler in favor of stock (and improved) CMake one (still works with Windows);
Do not force SIMU_AUDIO and LUA_COMPILER in SIMU builds (leave it up to user);
Add SIMU_LUA_COMPILER option specifically for SIMU builds (default = ON);
* [build][Windows] Rewrite/Fix Windows Companion `install` target, with two options:
a) just copy supporting Qt and c++ DLLs to build folder so programs can be quickly be run from there (this is default and similar to the old behavior);
b) full installation to CMAKE_INSTALL_PREFIX path, including all binaries, supporting DLLs, language files, and OTx utilities.
Option b) can be selected with new WIN_DO_FULL_INSTALL parameter;
Also cleans up the Linux install a bit and consolidates the OS X parts;
* [simulator][Windows] Add option to build Windows simulator with system console/terminal enabled (both standalone and when launched from Companion). Mostly useful for debug as it gives output messages much sooner in the startup process than the current debug console. Also helpful because you don't have to open it manually on every launch, and it remembers last window position and size. Possible candidate for a user-selectable runtime option in the future.
* [Windows] Fix MSVC build issues.
* [build] More build fixes:
Use a customized FindSDL.cmake script again due to bugs and deficiencies in the official version (based on script from CMake v3.7);
Fixes missing SDL DLL error in NSIS installer);
Use string for Timers option (checkbox in GUI is confusing);
Remove an unused variable.
* [simu][Windows] Fix f_getcwd() cutting off too many characters (fixes SD browser interactions).
* Better memory stats (CLI)
* Bitmap buffer overflow check added
* Lua bitmap improvements
* Proper handling of symbolic links in simulator
* S6R Lua script fixes:
* added progress screen while loading bitmaps
* memory for bitmaps is now freed when leaving the script
* S6R Lua script: improved bitmap loading
* * Lua Themes and Widgets moved to separate file and separate Lua state
* Stand-alone, mixer and function scripts now behave the same as on Taranis (restarted after the stand-alone script was run)
* both Lua states are independent: Themes and Widgets is initialized only at the start, the other one is initialized before and after the stand-alone script is run
* Better leak test and report in BitmapBuffer
* Re #3318: Lua compiler enabled in simu and Companion simulator. Usage:
* any time <xxx>.lua file is about to be loaded and if file <xxx>.lua.src exists:
* load contents of <xxx>.lua.src
* compile Lua code
* save compiled code into <xxx>.lua (effectively overwrites existing file)
* immediately following the compilation the real file loading is done from <xxx>.lua (which by now contains compiled Lua bytecode)
* Add cmake configuration for Libfox.
CMake on OS X does not find libfox in the homebrew location otherwise
* Fix findpackage(Fox) for case sensitive systems