* Solve the messy display after Boxer shutdown
Solve the redundant cluttered display on the screen after Boxer is shut down.
* Solve the messy display after F407 B&W Radios
* fix: Remove double `cli` option
Seems like it was incorrectly added in #2123
* chore: Implcit CLI on ENABLE_SERIAL_PASSTHROUGH
* fix: Not really a conditional
* fix: Opt handled higher up
* #3368 DSM Telemetry Fixes
1. Expand constants for telemetry frame SIDs and optimize flow of processing of sensors (less CPU work)
2. Add Binary GPS
3. Add Dual Battery Sensor monitor
4. Fix bad math on some ESC sensors
5. Fix problem where ESC RPM sensor was changed from "Erpm" to "EscR".. fix it back to "Erpm" for compatibility with 2.8.x
* #3368 DSM Telemetry Fixes
1. Split long if-then-else code into more granular function.
2. fix ESC VBEC (BEC voltage)
3. Improve testing function
* fixes#2713
changes:
- use getMultiOptionTitle() instead of rfproto->getOptionStr() as getMultiOptionTitle() takes updated MPM status in account
* code cleanup: removed obsolete functions
* fix#3046
* fixed my complete misunderstanding of how the chosen protocol is updated in Multi DSM auto mode
* removed obsolete check
* update subType list only on rf protocol change
added some comments
* reconsidered implementation utilizing LV_EVENT_REFRESH to avoid sporadic loss of update
* editorial change
* fix problem where a successful MPM DSM2 auto bind would reset the receiver ID
* reset DSM2autoUpdated just in case
* Add options to disable radio and model menu tabs.
- Update radio and model data structs
- UI for color LCD radios
- Convert existing 'noGlobalFunctions' property.
- Language strings.
* Make 'theme' control specific to color LCD radios.
* Add B&W radio UI.
* Simplify code, reduce compiled code size.
Fix page count display on model select tab.
Fix GVARS for 212x64 radios.
* Collapse timer sections if timer is off.
* Remove 'Use global functions' checkbox from B&W model setup.
* Make preflight checks, throttle and view options sections expand & collapse (default collapsed).
* Fix build.
* Add view options to companion data classes, save and load values in YAML files.
Fix scrolling for radio setup view options.
* Add Companion UI for view option settings.
* Remove 'Mixes' from list of tabs that can be hidden.
* Updated Companion UI from elecpower.
* Use view options flags to enable/disable functionality:
- skip heli mixer logic if heli not enabled
- Remove heli, gvars and telemetry options from source selection if not enabled
* Remove 'flight mode', 'curve' and 'global variable' settings from input & mix editors if option disabled.
* Rename 'View Options' to 'Enabled Features'.
Put GVAR option under Flight Mode and indent text.
Make relationship between FM and GV more obvious.
* Remove global variable option dependency on flight modes.
Hide FM1-FM8 in global variables if flight modes hidden.
* Hide 'Custom Mixer Scripts' in source selection menu popup if disabled.
* Add translation strings for Hebrew language file.
* Fix typo. Add comment for double call to setCurrentTab.
* - Concentrated Multi protocol definitions into a consistent single source. Actually two .h files, one for the protocol list and names, the other for subtypes and capababilites, see comments in .h files as to why
- updated available protocols reflecting 1.3.3.20 (15+ protocols)
- fixed Companion always showing f/s and channel map options in model setup disregarding the protocol capability
* Following @pfeerick's review: changed heaeders and typos
fixed Ubuntu runtime error on assert
fixed change of Multi protocol not triggering writing yaml file
* corrected copy/paste error
* fixed FrSky index juggling
* Updated Multiprotocol database to current MPM project status (ref. MPM Multiprotos.ino)
- changed protocol name FX816 to FX
- added Flysky AFHDS2A options PPM and PPWM SBUS 16ch subtypes "PWM,SB16" and "PPM,SB16
- added V761 option to select TOPRC
- added FX options "816" and "620"
- added FRSKYR9 option "-- 8ch"
* MPM protocol scan excludes some protocols which are not meant to be selected. For Companion and Simualtor (and for radios if there is no MPM connected) this was handled in different places with outdated information. Harmonized and centralized the handling of non-selectabale protocols into the single source for all companion, Simulator and all gui types.
* More cleanup:
- changed some MPM protocol names to the ones the MPM delivers with MPM protocol scan to harmonize names between CPN/Simulator/radio
- added XN2927DUMP and MOULDKG to the list of excluded MPM protocols just like the MPM does with MPM protocol scan
- added new option value limits and moved definitions to single source
- adapted CPN and radio to use common definitions of option values for all GUI types
- moved distributed MPM (as far as possible) to one coherent place under a single #if defined (MULTIMODULE)
- fixed option value not reset at change of protocol
- some editorial stuff
Note: There is still some work to be done on CPN GUI option values. DSM2 servo rates are hard coded, BAYANG telemetry options are only shown by index and not by text as in radio code, AFHDS2A servo update rate is shown as index too which is to no use for users.
I'll try to fix all this in the next session, but request to get rid of BAYANG telemetry options translations. It is much easier to define a common string list by using untranslated.h
* rebase due to fr.h
* resolve merge conflict with main fr.h
* more cleanup:
- deleted multiple definition of MM_RF_CUSTOM_SELECTED in favor of single source define
- bw radios: change to only allow defined protocols rather than a fixed 127 protocols
* Changes:
- magic sentinel number 0xfe as define
- add 10 NN protocol entries for future use of new MPM protocols not yet defined in ETX (still recommend timely ETX maintenance update if MPM releases new firmware)
* Changes by @elecpower:
- align field labels to radio
- change servo update frequency from combo box to spin box with edit only via up/down arrows to stop invalid values being entered via keyboard. Remove frequency list used to populate combo box as only used by Companion.
- add validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.
* Changes:
- radio: added validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.
* CPN: use sentinel define
* cpn: Sort multi protocols list (courtesy @elecpower)
* fixes#3480
changes:
- moved FrSky subtype defines to MultiProtoDefs.h
- updated bind_button_driver.cpp
* missed replacing one instance of setMultiProtocol()
* changes:
- editorial change
- added multi option to OMP protocol (ref #2713)
* rather go for STR_MULTI_RFTUNE because MPM manual talks about RF tune
* made XN297_DUMP selectable (available with MPM debug fw only)
* corrected merge mistakes
* feat(ui): rephrased to "Missing or bad radio data"
Less daunting label if \RADIO folder on SD card is non-existent.
Thx to jan-kozak-oc, robustini, ToshihiroMakuuchi, Pat6874, HThuren, Eldenroot, ulfhedlund and zyren for translations.
* Fix memory leaks when using 'USB Storage (SD)' connection.
- Lua state 'cache' allocated to both lsScripts and lsWidgets; but only one was being released.
- Default theme bitmaps being reloaded without releasing previously allocated memory.
* Fix icons.
* RX stat (formerly known as "RSSI") labeling dependent on protocol (RSSI/dbm, Rqly/%, Sgnl/-) used for range check, multi rf tuning and low/critical warning settings pages
* chore: Bump libopenui
* removed define that was supposed to be for testing only
function getRxStatLabels(): wasting flash as inline, no need to be inlined
* removed inline on getRxStatLabels() - step 2
* introducing external MLink module telemetry as module PPM subtype
* implemented fix for sensor discovery display not showing all detected sensors (is in separate PR too)
implemented PPM subtypes in Companion
* add PPM subtype to model printer
finalize subtypes for PPM in Companion
* added logic to try to use HW UART with inverters turned off first (e.g. NV14), then, if not successfull use soft serial inverted (== uninverted data due to HW inverters on PCB)
changed start bit detection IRQ priority from 5 to the previous 0 (also in separate PR)
* extended telemetry timeout to 2s due to slow Mlink RSSI update rate
* changed the "NOTLM" sub-type texts to:
- "No Telem" for 128x64 (this is the max numbers of characters it can take)
- "No Telemetry" everything else including Companion
* Companion:
- lower case 1st charachter on PpmSubTypeStrings to ppmSubTypeStrings
- added telemetry hooks for ppmSubTypeStrings stringx
* simplified serial port initialization for MLink telemetry
* editorial change: corrected obsolete comment
* Translation for range test
* Translation for range test
* Translation for range test
* Reviewed translations for 9 languages
Reviewed translations for 9 of 11 actively translated languages
* Translations for Chinese and Taiwanese
* support hebrew audio selection
* support hebrew audio selection
* support hebrew audio selection
* support hebrew audio selection
* support hebrew audio selection
* TLite F4
* chore: Add to fw list for Buddy
* chore(cpn): TLite F4 Companion support
* fix: Remove seemingly incorect cmake set
Or at least, the code now builds without that directive
* fix(cpn): Stupid typo
* chore: Actually build/register tlitef4 simulator
* fix: Need tlitef4 flavor for simulator and updates
* chore: tlitef4 can use tlite simulator
* fix: downloadid AND simulatorid
* fix: Correct simulatorid
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: Peter Feerick <pfeerick@users.noreply.github.com>
