Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* fixes#2552
- remove edit option rssiSource
- reset rssiOption to default (none) if carried over from OpenTX conversion
* deleted rssiSource functional code Companion, simulator and radio
* forgot one commented line
* feat(cpn): Add radio sort order edit (color) and sorting models list by any column (all)
* Add column double click to enable/disable model sorting (disabled by default)
* Refresh UI module settings when AHFDS3 config is updated.
* Fix scroll order for module options when 'FlySky' module type selected.
Fix simulator crash issues related to FlySky module.
* Fixed UI refresh problems in UI widget ordering fix.
* Refresh config when receiver is connected.
* Disable change of bind time options when receiver is connected.
* Rename methods to better distinguish between buffer fill or actual send.
* Clean and tidy up AFHDS3 state flow.
* Implemented settings sync upon setting changes.
* Added RF power settings for IRM301/FRM303.
* Added RF power sensors for FRM303.
* Fixed config not saved and only FRM303 supports RF power settings.
* Fixed RF power command error.
* Fixed a crash for IRM301.
* Always check if port exists and return nullptr for driver.
* fix: Make Companion preserve settings *as is*
---------
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Fix the Flight Pack sensor processing.
The main problem was that we expected the data to come in big-endian encoding, but in reality, the sensor send it in little-endian. This was causing the 1st byte to change much faster, and eventually move into the negative value.
Added more validations to handle little-endian values, and recognize NO-DATA scenarios
* translated_theme_text
* translated theme text
* translated theme text
* translated theme text
* translated theme text
Changes to allow direct use of translation strings for all theme text, as per code from @philmoz
* Some minor changes
* Proper translations for CZ,DA,DE,FR,HE,IT,JP,PL
* Translations for CN,TW
* Minor correction
* Added audio on/off depends whether audio content is present.
* Aligned the mute control with the implementation in the DAC driver.
* Mute Pin should be inverted.
* Removed PCB specific dependencies.
* chore: Formatting and cleanup
* Solve the messy display after Boxer shutdown
Solve the redundant cluttered display on the screen after Boxer is shut down.
* Solve the messy display after F407 B&W Radios
