bsongis
7b000b376d
Possible division per 0
2012-06-26 20:14:12 +00:00
bsongis
99a6b32421
Consumption 10 times too big
2012-06-26 19:34:27 +00:00
bsongis
3ca8834d44
PREC1 for current
2012-06-26 19:33:19 +00:00
bsongis
03e89f382e
Slow / Delays were broken!
...
Some variables renamed
2012-06-26 19:09:10 +00:00
bsongis
0ab16b6734
companion9x compilation
2012-06-26 10:16:24 +00:00
bsongis
5dd7c105b6
Current consumption may depend on 3 different sources
...
Flash saving in FrSky code
SD card wav player (still read as raw 12000Hz 16bit samples)
2012-06-26 10:09:31 +00:00
romolo.manfredini@gmail.com
61bbfd6e7c
Add support for FAS100 sensor
2012-06-26 07:17:17 +00:00
bsongis
777f48121b
CooCox on ARM
...
New option THR_TRACE to save flash and RAM on Stock board
DMA used for SD-Card
CMD16 command added for block length = 512 bytes
2012-06-19 22:49:48 +00:00
bsongis
82fe7c61b1
SOMO-14D work for the gruvin9x board
2012-06-06 10:06:36 +00:00
bsongis
214332fbb9
Cells Voltage in CSW should be ok when increasing (could only decrease before)
2012-06-05 08:24:01 +00:00
bsongis
9ef47a1e63
Switch and Throttle Warnings when loading a model. To be tested and re-tested ...
2012-05-25 13:52:39 +00:00
bsongis
d64c4710e7
Some code for NODATA alarm still remaining
2012-05-20 08:31:09 +00:00
bsongis
1e8219e110
Bug when displaying Max GPS speed in Custom Telemetry View. Also should fix a bug when WSHH used with IMPERIAL option.
2012-05-19 10:32:44 +00:00
bsongis
a4be1f9177
RSSI gauges were not beautiful when sometimes RSSI goes over 99%
2012-05-18 11:41:34 +00:00
bsongis
9fc9cd18be
Better averaging for FrSky A1/A2/RSSI
2012-05-18 10:35:21 +00:00
bsongis
aabe510663
VARIO option introduced
2012-05-10 16:57:41 +00:00
bsongis
e9e6cfd19b
FrSky A1/A2 averaged only if unit is volts
2012-05-10 07:13:23 +00:00
maxim.karban@gmail.com
cb1d384a03
VARIO_EXTENDED variables renamed
2012-05-09 17:21:10 +00:00
maxim.karban@gmail.com
57ab818538
VARIO_EXTENDED
...
removed bug around zero vspeeds
2012-05-09 17:17:15 +00:00
maxim.karban@gmail.com
10f017275d
commented lines removed
2012-05-09 12:35:26 +00:00
maxim.karban@gmail.com
7e6eccfbc9
VARIO_EXTENDED A1/A2 sources fix
2012-05-09 12:11:04 +00:00
bsongis
0b356b1886
Vario flash saving (8bytes)
...
A1 and A2 values displayed in TELEMETRY menu (to avoid switching screen for calibration)
2012-05-08 21:58:24 +00:00
bsongis
571be5bf77
Vario fix
2012-05-08 21:08:12 +00:00
maxim.karban@gmail.com
fe61a4fe7f
Variometer sources now:
...
BaroV1: uses altitude before point only multiplied by 100
BaroV2: uses filtered altitude provided better than frsky hub source
A1/A2: uses winged shadow thermal scout connected to A1/A2 inputs on receiver
2012-05-08 20:07:57 +00:00
bsongis
71daab636d
Speed range was not good (1000km/h). Now 500km/h as a max.
2012-05-05 17:27:22 +00:00
bsongis
532109ba8c
We were storing Min Gps speed instead of Max
2012-05-05 16:54:16 +00:00
maxim.karban@gmail.com
fe2a5b461d
VARIO_EXTENDED new feature
...
Limits changed:
Down speed min in range OFF,[-10.0:0] in 0.1 steps
OFF means no sound at all, this variant useful if pilot/model is aerobatic
Up speed min in range [-1.5:1.5] in 0.1 steps
strange negative values for positive vertical speeds means next:
in normal fly glider model has negative speed always, for example -1m/s
if any weak thermal flows found then vertical speed can be reduced but still negative, but it is symptom of thermal flow which can be very close!
now it is possible to detect if negative Up speed limit is set.
2012-05-03 18:35:56 +00:00
bsongis
6e201bc4b6
Some Haptic corrections
2012-05-03 17:19:06 +00:00
maxim.karban@gmail.com
8f20e423f6
VARIO_EXTENDED cosmetic changes
...
Limits are:
Down speed OFF, -10.0:0.0 in 0.1m step
Up speed 0.0:+1.5 in 0.1m step
to be continued...
2012-05-03 14:50:34 +00:00
bsongis
6afc680d93
Split Haptic from Audio
...
Vario from Max added
Tests needed on all boards!
2012-05-03 09:19:20 +00:00
bsongis
b4937b5e25
getGpsDistance() bug fix (thanks Mike!)
2012-05-01 21:02:52 +00:00
bsongis
f45ae2da51
Min & Max Altitude on WSHH
2012-05-01 20:20:39 +00:00
bsongis
940bb7b351
Too little array for FrSky Bars Thresholds
2012-05-01 19:50:20 +00:00
bsongis
2cc208f8a1
Missing cast in getGpsDistance()
2012-05-01 09:03:39 +00:00
bsongis
76e3999de2
Compilation error
2012-04-29 14:52:25 +00:00
bsongis
021f31186a
We don't use GPS for maxAltitude and minAltitude if the Baro sensor is used.
2012-04-29 14:11:31 +00:00
bsongis
9bc161e4b1
WSHH bug (conversion from meters to feet when source was feet!)
2012-04-29 13:23:17 +00:00
maxim.karban@gmail.com
8868ee2686
previous version rolled back as it works with negative altitude values
...
which is possible at sea level and high atmospheric pressure or in Holland for example
2012-04-28 15:21:51 +00:00
maxim.karban@gmail.com
3a981ef490
evalVario() optimized
2012-04-28 14:34:16 +00:00
maxim.karban@gmail.com
b813908493
VSpd bug fixed
2012-04-28 10:12:47 +00:00
bsongis
d5793858b0
VSpeed displayed with PREC2
2012-04-28 07:53:13 +00:00
romolo.manfredini@gmail.com
3303846fce
Save flash and cpu time
2012-04-27 23:45:55 +00:00
bsongis
a84e72f4ff
6bytes flash saved
2012-04-27 23:39:47 +00:00
bsongis
5e9485b7c5
Baro Altitude Offsets were calculated on _bp when receiving _ap values. Now offsets are calculated when _bp is received and vario when _ap is received.
2012-04-27 23:27:16 +00:00
maxim.karban@gmail.com
87597c206d
Alt on telemetry screen blinking fix
2012-04-27 17:49:29 +00:00
maxim.karban@gmail.com
0ca2a879af
evalVario(...); before altitude offset applied, fixes VSpd jumping numbers
2012-04-27 17:23:57 +00:00
bsongis
124db1cc7f
No more vario on GPS. Too poor precision. Too poor update frequency. It cannot work.
2012-04-27 16:05:04 +00:00
bsongis
dc85a648d2
Vario on A1/A2 implemented
2012-04-27 15:46:55 +00:00
bsongis
a2ade445ac
Vario. Port from unstable branch. Part 1.
2012-04-27 15:36:17 +00:00
bsongis
30be30212c
Merge of ARM branch
2012-04-26 14:43:52 +00:00
bsongis