* Show telemetry errors in Debug statistics
This introduces a second debug page on X7 and X9 platform since the original page is almost full.
Also fix the X7 menu navigation to be able to go back and forth
* Fix compile error on platforms without key_page
* avr-gcc bails on missing eolf
* Fix navigation
* Just keep pushing ....
* compile fixes of 9x and use chainMenu
* Fixes
* Align x9 behavior to x7 (for once !)
* Allow total timer reset on both long menu and long enter
* Improve 9x handling
* Basics to allow Horus BT module on X9E
* wip
* Temporary hack to prevent X9E to enter reset loop
* The wait game starts :)
* Temporary compil fixes
* More sensibles defines
* Crossfire baudrate selection for X7 support ( fixes#4922 )
* Moved baurate selection to general settings
* renamed mavbaud to telemetryBaudrate for ARM targets
translation added
* typo fixed
* Remove most of the special logic associated with RF_PROTO_OFF
This simplifies code in many areas since the internal module does not require special handling and also fixes a few bugs with INTERNAL_PPM
* Disable R9M sport option if internal module has telemetry
* Fix X12s build
* Use macros instead of direct comparisions
* Fix sport bit sent the wrong way. Rename S.port out to Telemetry
* Compile fix
* Trainer Bluetooth support added
X7S board added (X7 has no bluetooth while X7S has)
X10 HAL updated
* Bluetooth Telemetry
* En fix
Add all languages
* Temporary test for @bsongis
* Missing translations
* Turn on X7 like it is done on X9
* 4 squares like shutdown + prep for firmware option to disable
* Compile option
* - rollback firmware option
- fast one second power on
- unchanged power off
- animation added for x7 power on
- animation for power off changed to 'removing' quarter instead of adding (ie the power on anim fills in, the power down fills out)
* Cosmetics
* Cosmetics
* [Simulator] Create RadioKeyWidget class for UI buttons & refactor ButtonsWidget; Refactor SimulatedUIWidget (and subtypes) to use new RadioKeyWidgets/ButtonsWidget; Centralize help text for key mappings and get creative with some icons; Simplify some radio UI setups with rectangular buttons.
* [Simulator] Convert all simulator data I/O to signals/slots mechanism:
* SimulatorInterface/OpenTxSimulator:
- Now inherits from QObject to allow signal/slot interface;
- Allows data exchange on a per-item basis (eg. each I/O value is treated separately instead of sending whole arrays or structs of data);
- Checks for data changes and only emits signals when change is detected (GUI can now assume only new values are being sent);
- Manages its own 10ms timer (doesn't rely on GUI to do that);
- Sends "heartbeat" signals @ 1Hz for status monitoring;
* Simulator GUI:
- All data is exchanged between GUI elements as well as SimulatorInterface via signals/slots using standardized methods;
- Data is sent immediately, and only, when actually changed (eg. a control is moved) instead of in bulk at specific time intervals;
- Similarly, an asynchronous method is used for reading incoming data, w/out timers or loops;
- Improve VirtualJoystickWidget to be more encapsulated and configurable;
- Pause telemetry simulator if window is hidden;
* [Simulator] Move SimulatorInterface instance to separate thread, ensure safe asynchronous operations & proper timer interactions; Protect/remove some functions, & reorganize the order (cosmetics).
* [Simulator] Traces are now delivered to OpenTxSimulator and one or more QIODevice(s) can be added as recipient(s); Add SimulatorInterface::getCapability() for compile-time settings; Remove reversed POT1/SLIDER1 mixer exception (Taranis) requirement for SIMU; Fix plus/minus key delay on wheel event w/out encoder.
* [Simulator] Add current knob/slider/trim input value in tool-tips (KnobWidget and SliderWidget).
* [Simulator] Fix trims widget internal value not properly updating, and remove trim influence on virtual joystick X/Y value display (closes#4671).
* [SimulatorInterface] Add handling of transmitter input voltage, including a rough conversion of volts to ADC value for different boards, and default battery volts lookup function; Clear analogs array before starting.
* [Simulator] Add SimulatorInterface::init() method to separate pre-startup tasks; Report actual trim range, not just extended on/off; Change how radio widget states are restored; VirtualJoystickWidget: Connect trim changes directly from simulator, connect joystick events directly, report stick mode directly instead of setting values/constraints externally.
* [Simulator] Calculate default Tx V input based on configured range in radio settings (or warning V+2 for radios which don't support a range).
* [Simulator] Add functional aux. trims for Horus (closes#4699).
* [Companion] Remove problematic QMessageLogContext from AppDebugMessageHandler::messageOutput().
* [Simulator] Prevent trim change via slider if disabled for flight mode (closes#4600).
* [OpenTxSimulator] Fixes for Qt < 5.4.
* [OpenTxSimulator] Fix slot name.
* [Simulator] Remove extraneous format value in microsTimer; Better way to delete SimulatorStartupDialog (in case no event loop starts).
* [Simulator] No helpers dependency for SimulatorStartupDialog.
* [simpgmspace] Rename micros timer function and make externally available.
* [Companion] Fix possible uninitialized value in TreeModel (compiler warning).
* [multi_arm] Fix minor compiler warning (MSVC: "unsafe mix of type 'uint8_t' and type 'bool' in operation").
* [lua] Fix compiler warning ("'data' may be used uninitialized in this function").
* [OpenTxSimulator] Fix analogs array range.
* [Simulator] Auto-start simulator when SimulatorMainWindow is first shown (vs. before it was shown).
* [Simulator] DebugOutput: prevent possible mutex deadlock on buffer overflow (force queued connection for Qt < 5.3).
* [Companion] Display calibration data for Horus joysticks (MOUSE1/MOUSE2)
* [build] Add "all-libsimulators" target to build all simulator flavors at once.
* [build] Refine the "all simulators" target setup and deal with GNU 'make' parallelism issue (ninja=faster); rename to "all-simu-libs".
* [simpgmspace] Fix 2MHz and 16KHz timers on MSVC builds (fixes LCD/key/switch response delay on all AVR simulators); Introduce experimental use of Qt to simplify x-platform code (disabled by default).
* Qt timer scaling fix.
* [Companion] Introduce new Boards class to further consolidate hardware metadata and remove some globals.
* [Companion] * RawSource::toString() and RawSwitch::toString() can now return custom hardware names (if given a GeneralSettings object) for the following types (respectively):
SOURCE_TYPE_STICK, SOURCE_TYPE_SWITCH, SWITCH_TYPE_SWITCH, & SWITCH_TYPE_MULTIPOS_POT;
* RawSource::isPot() and isSlider() can now return their own index position in potConfig[]/sliderConfig[];
* Switch indicator strings can be localized if necessary.
* [Companion] Refactor model printers to use new RawSource/RawSwitch capabilities; Simplify model-to-printer mapping scheme in multimodelprinter; Use const ModelData pointer.
* [Companion] Refactor how RawSource and RawSwitch selection combo boxes are populated, using cache-able data models instead of direct manipulation; Refactor some other Helpers function into their own namespace.
* Cosmetics & forgotten qualifier.
* [Simulator] Create a reusable RadioTrimWidget; Move all trim-related enums to boards.h; Make sure aux trims are accounted for in SimulatorInterface; Trims now use toolbuttons with icons instead of pushbuttons with text.
* [Simulator] New buttons & icons for virtual joystick axis hold/fix toggles; Joystick ball is now slightly scaled to stick area.
* [Simulator] Virtual joystick now "follows" mouse clicks within the stick area (left-click on empty space will attract the control node).
* [simulation] Hardening: Fix some potential crashes & 26 memory leaks, improve LCD performance.
* [simpgmspace] Init trims; Make sure `REa` is really defined (to match board files).
* [simpgmspace][opentxsimulator] Verify current running state before start/stop; Move rotary enc. init.
* [simpgmspace][LcdWidget] Improve performance by moving LCD content change check to lcdRefresh() & limiting LcdWidget refresh time to 60 fps max.
* [simueeprom] Ensure thread could be started, set default running state to false.
* [simufatfs] Fix paths report trace.
* [eepromimportexport] Fix memory leaks resulting from import debugging scheme being used.
* [customdebug] Introduce new scheme for custom debug output in compliance with Qt recommendations (see docs for QLoggingCategory).
* [opentxeeprom] Fix extra conversion table cache elements being created and also not properly deleted (and hence leaking).
* [opentxinterface] Unregister EEpromInterfaces in unregisterOpenTxFirmwares();
* [storage] Unregister storage factories on exit (fixes leak); create virtual StorageFormat/StorageFactory destructors (prevents warnings).
* [helpers] GVarGroup now emits own signal, no need to pass ModelPanel pointer (removes dependency on modeledit.h)
* [DebugOutput] Clear simulator trace hook before exiting (prevent possible issues); Fix leak and possible bad QString allocations when reading from buffer; Fix leak with combo box event filter.
* [TelemetrySimulator] Fix leak by deleting LogPlaybackController object on exit; Only set up data fields once; convert timers to static.
* [build] Consolidate all Companion/Simulator shared items in `common` library to reduce build time/etc (node & edge still remain awkward).
* [simulatorwidget] Delete removed spacer object (previously-forgotten "26th" leak).
* [DebugOutput] Fix stray trailing characters issue with new text buffer allocation (from previous commit); Increase maximum buffer sizes to better accommodate slower systems.
* Cosmetics.
* [Simulator] Increase resolution of CoGetOSTime() on Windows MSVC (possible fix for #4529, ref. #4342).
* Return total time, not delta time.
* Improve efficiency.
* New drivers : buzzer/speaker, voice wtv20 / jq6500 , i2c
First commit, testings to be done
* Voice correction
* Better way to drive voice modules
Same thing as LCD drivers
* Issue #2337 (error mismatch) solved
* Font correction
* Fonts correction again
* oups...
* Voice modules (Companion) & flash saving (ST7920)
* Documentation update
* I2C driver correction
* Mega2560 directory renamed to mega2560
* M2560 driver correction
* Voice directory correction
* Voice=ON does not works with MEGA2560 (OFF/WTV20/JQ6500)
* Compliant to cmake documentation
* On M2560, audioAVR use playnumber et playduration declared in voice.h
Don't know why, must be discuted...
* ‘{’ token forgotten
* Simplier way for AVR voice
Kilrah