* Added turning the red LED before RTC data and blue LED afterwards
With the LED turned RED if the RTC data retrieval fails it will stay red.
This will at least be an indication that the RTC startup encountered
a problem. For now there is no indication that this problem occurred.
* GH-3005 Moved LED manipulation to conditionally compiled when RTC operation happens
* Enable RX DMA on external module USART
* feat(ACCESS): configure AUX serial port as "External module" (#2562)
This allows configuring the external access mod on runtime rather than by compilation option.
* fix: fetch external module driver
* CMake cleanup and simplifications
* Position Independent Code is need for radiolib_native
* Some more cleanup & repair
* Fix SIMU_SRC scope issue
* fix: avoid warnings due to assembler statements from StdPeriph on arm64 native
* Use PP for extmod invert output and remove redundant pwn pin init.
* Reshuffled lines for increased readability
Co-authored-by: Risto <rotorman@users.noreply.github.com>
`g_FATFS_Obj` is located in `__DMA` section, which is not initialised, so that testing `sdMounted()` at boot relies on the fact that the bootloader linker script declares BSS in internal SRAM and not in CCM, as the firmware linker script does.
* feature(colorlcd): antenna selection
* fix: let's assume all internal XJT modules used in horus targets are either X10 or X12S type
* fix NV14 compilation
Co-authored-by: Raphael Coeffic <raphael.coeffic@frafos.com>
* feat(cpn): Initial iFlight Commando8 support
* fix: Commando8 doesn't have trainer port
* feat: Add Simulator for iFlight Commando8
Also some minor code re-order for BetaFPV LR3PRO
* chore: EEPROM_VARIANT not used
* chore: Remove EEPROM bits that don't seem needed
* fix: Build simulator plugin
* fix: Simulator PGUP/PGDN the right way around
* fix: Keep trainer mode in cpn for MPM, etc
Use `-DSPACEMOUSE=YES` CMake option to activate on Horus color targets.
Co-authored-by: Niel Horne (elecpower), Raphael Coeffic (raphaelcoeffic) and Peter Feerick (pfeerick).
* feature: added ability to have radio specific menu items in the bootloader
* added enabling/disabling USB access to the RF module via the bootloader
* enable the internal module on EL18, when RF module USB access is enabled
* moved USB switch pin initialization to the NV14/EL18 specific code
* moved EL18 USB switch defines to boot_menu
* feat: added a symbol for RF USB switch menu option on EL18 bootloader
I just wanted blue LEDs on my Jumper T-Pro. Instead I found a headache.
PCBX7 STATUS_LED definitions were being used for RADIO_TPRO, resulting in incorrect GPIO pin assignments for GREEN and BLUE LED colors. LED_GREEN_GPIO_PIN would activate the blue LED, and vice versa for LED_BLUE_GPIO_PIN.
To rectify this, a new definition for RADIO_TPRO has been created with proper GPIO pin assignments for LED_GREEN and LED_BLUE