* chores(flysky): separate AFHDS2A and AFHDS3 into 2 different module type
This should allow to remove some of the hacks added earlier.
* chore: Add some EL18 CI bits
* fix(afhds): cmake defs
* fix(ci): add el18 to commit-tests.sh
* chore(cpn): separate AFHDS2A and AFHDS3
* chore(cpn): remove binary import of afhds and legacy fxFreq field for afhds3
* fix(cpn): limit available internal afhds protocols to those supported by hardware
* chore(cpn): update Flysky int module test
* fix(cpn): compile error
* fix(cpn): afhds2a max channels
* fix: TR_MODULE_PROTOCOLS
* enh(cpn): more support for afhds2a and 3
* fix(cpn): rebase compile error
* fix(cpn): bit indexes
* fix(cpn): emi toString
* fix(cpn): limit available internal afhds protocols to those supported by hardware
* enh(cpn): add support for Flysky EL18
* fix(cpn): available protocols
* fix(cpn): rebase moduledata
* chore(cpn): add module fields to model print
* Separate AFHDS2A and AFHDS3 UI settings.
* Fix AFHDS3 conversion from old subtype value.
Fix 'Channel Range' layout on portrait LCD.
* Fix name.
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* TLite F4
* chore: Add to fw list for Buddy
* chore(cpn): TLite F4 Companion support
* fix: Remove seemingly incorect cmake set
Or at least, the code now builds without that directive
* fix(cpn): Stupid typo
* chore: Actually build/register tlitef4 simulator
* fix: Need tlitef4 flavor for simulator and updates
* chore: tlitef4 can use tlite simulator
* fix: downloadid AND simulatorid
* fix: Correct simulatorid
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: Peter Feerick <pfeerick@users.noreply.github.com>
* chore(pc): convert simu/simulator/companion to use SDL2
* switch companion builds to SDL2 - OSX is not converted
the linux change is done a bit hacky, it should be done by updating the EdgeTX docker container
* update build system setup scripts
* add compatibility for old and new SDL2 cmake integration
* fix windows installer
* fix simulator audio on windows by using DirectSound vie SDL2
* fix windows audio with SDL2
enable simu for windows builds
* remove workflow changes for linux builds, this needs to be fixed in the build environment
* fix OSX build, thx @pafleraf
* fix windows audio for companion and simulator with SDL2
* select SDL2 branch of the build-docker environment
* Revert "select SDL2 branch of the build-docker environment"
This reverts commit da801609d78e1aed513ad7d9d8ab3ebded2900b9.
* fix tests with SDL2
* enhance msys2 build script
- stop on error
- support different branch's (not only main)
- add all the radio option on top of the script
- support re-run of the build (handle existing dir & git pull)
- add logs to follow the progress steps (especially in case of failure)
Authored-by: oshmuely <AbCd321654>
* feat(cpn): Initial Radiomaster Boxer support
* fix(build): Halt if invalid simulator plugin specified
* fix: 6POS not correctly defined
* chore: Less EEPROM stuff needed
* Start of simulator support
* Enable left buttons and fix area mapping of page up and down
* fix(cpn): Internal reference to pots
---------
Co-authored-by: elecpower <neilh713@tpg.com.au>
PR #2995 didn't take into account the data model storage actually does change when you change a variable name.
Boxer yaml generation was missed in earlier PR.
* chore: Run `generate-yaml.sh`
* chore(cpn): carryTrim -> trimSource
* fix(build): Boxer missing from `generate-yaml`
* dodgy attempt to read old carryTrim
* fix: Don't break the byte boundary + reorder
* fix(yaml): indentation for attributes that should not be output
* chore: Regenerate YAML after rebase
---------
Co-authored-by: raphaelcoeffic <raphael.coeffic@frafos.com>
* Japanese radio translation
`jp.h` based on #2006 (Kudos to @ToshihiroMakuuchi)
* fix: Gyro is now IMU
* Japanese modifications were made to the display. (#2171)
* Update JP translation file
* Update JP fonts
* Fix rotary encoder mode string
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: まっく まるちぷろとこる <36994795+ToshihiroMakuuchi@users.noreply.github.com>
* feat(cpn): Initial iFlight Commando8 support
* fix: Commando8 doesn't have trainer port
* feat: Add Simulator for iFlight Commando8
Also some minor code re-order for BetaFPV LR3PRO
* chore: EEPROM_VARIANT not used
* chore: Remove EEPROM bits that don't seem needed
* fix: Build simulator plugin
* fix: Simulator PGUP/PGDN the right way around
* fix: Keep trainer mode in cpn for MPM, etc
* Dannish special characters
* Danish special characters
* Danish special characters
* Danish special characters
* Danish special characters
* Danish special characters
* chore: Reset header to `copyright-header` template
`tools/copyright-header.txt` template is what should be used.
Also added line at EoF to make git happy
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* fix: Prevent potential wordsplitting of variables
* chore: Remove need for separate cpn 32bit script
* Build script tag/branch/PR auto-detection
* Teach companion about VERSION_TAG
* Update some constant names
* Only one companion build script
* Actually use `VERSION_SUFFIX` in about screen 🤦
* Add space
* Remove line that was only for testing 32bit build
* Remove hyphen between win and bits
* Show codename in Settings -> Version
* cpn: Only show codename on tagged versions
* Update about screen also
* Double quotes around codename on colorlcd
* Update copyright year
* About screen should use VERSION_TAG when set
